project:mainframe:ipl-status-src
Differences
This shows you the differences between two versions of the page.
| project:mainframe:ipl-status-src [2016/02/11 15:24] – created maxfx | project:mainframe:ipl-status-src [2016/02/11 15:27] (current) – maxfx | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | IPL Status SRCs | ||
| + | As the system performs an IPL, SRCs appear on the control panel. The SRCs \\ | ||
| + | indicate the status of the IPL and are often useful in problem analysis. The \\ | ||
| + | following list provides information on the IPL process and shows some SRCs (in \\ | ||
| + | numeric order) that can appear during an IPL. | ||
| + | IPL SRC | ||
| + | * Function Performed \\ | ||
| + | * C1xx 1xxx \\ | ||
| + | * | ||
| + | * Service Processor ROS IPL in progress | ||
| + | * C1xx 1006 \\ | ||
| + | * | ||
| + | * Service processor ROS loading RAM from MFIOP directed device \\ | ||
| + | * C1xx 1007 \\ | ||
| + | * | ||
| + | * Service Processor ROS retrying attempt to load RAM from MFIOP directed \\ | ||
| + | * device | ||
| + | * C1xx 1008 \\ | ||
| + | * | ||
| + | * Service Processor ROS attempting to load RAM from non-MFIOP directed \\ | ||
| + | * device \\ | ||
| + | * C1xx 1009 \\ | ||
| + | * | ||
| + | * Service Processor ROS retrying attempt to load RAM from non-MFIOP \\ | ||
| + | * directed device \\ | ||
| + | * C1xx 1016 \\ | ||
| + | * | ||
| + | * Service Processor ROS attempting to load RAM from MFIOP default device \\ | ||
| + | * C1xx 1018 \\ | ||
| + | * | ||
| + | * Service Processor ROS attempting to load RAM from non-MFIOP default \\ | ||
| + | * device \\ | ||
| + | * C1xx 1019 \\ | ||
| + | * | ||
| + | * Service Processor ROS retrying attempt to load RAM from non-MFIOP \\ | ||
| + | * default device \\ | ||
| + | * C1xx 100C\\ | ||
| + | * | ||
| + | * Service processor ROS IPL complete, branch to RAM Loader \\ | ||
| + | * C1xx 1030\\ | ||
| + | * | ||
| + | * Loading Service Processor system LIC from MFIOP device \\ | ||
| + | * C1xx 1050\\ | ||
| + | * | ||
| + | * Loading Service Processor system LIC from non-MFIOP device \\ | ||
| + | * C1xx 2001\\ | ||
| + | * | ||
| + | * Service Processor is setting up to test and load system processor \\ | ||
| + | * C1xx 2002\\ | ||
| + | * | ||
| + | * Service processor is testing system processor and main storage \\ | ||
| + | * C1xx 2003\\ | ||
| + | * | ||
| + | * Service processor is loading system processor \\ | ||
| + | * C100 2034\\ | ||
| + | * | ||
| + | * LIC (system) has been initialized; | ||
| + | * C1xx 2050 \\ | ||
| + | * | ||
| + | * Service Processor is waiting for Load Source device \\ | ||
| + | * C1xx 2060\\ | ||
| + | * | ||
| + | * Service Processor started a read command from Load Source \\ | ||
| + | * C1xx 2090\\ | ||
| + | * | ||
| + | * Service Processor completed a read command from load source \\ | ||
| + | * C1xx 80xx | ||
| + | * | ||
| + | * Service Processor/ | ||
| + | * C1xx 805x \\ | ||
| + | * | ||
| + | * Service Processor is loading Control Panel LIC \\ | ||
| + | * C1xx B1xx\\ | ||
| + | * | ||
| + | * Basic assurance test completed on MFIOP \\ | ||
| + | * 180 AS/400 Service Functions V4R5 \\ | ||
| + | * C100 D009\\ | ||
| + | * | ||
| + | * LIC (system) running initialization \\ | ||
| + | * C200 1xxx \\ | ||
| + | * | ||
| + | * Secondary Partition Early IPL Initialization Phase \\ | ||
| + | * C200 1100 \\ | ||
| + | * | ||
| + | * Adding partition resources to the secondary configuration \\ | ||
| + | * C200 11FF \\ | ||
| + | * | ||
| + | * Partition resources added successfully \\ | ||
| + | * C200 2xxx \\ | ||
| + | * | ||
| + | * Secondary Partition SPCN Tower Power ON Phase \\ | ||
| + | * C200 1200 \\ | ||
| + | * | ||
| + | * Checking if IPL is allowed \\ | ||
| + | * C200 12FF \\ | ||
| + | * | ||
| + | * Partition IPL is allowed to proceed \\ | ||
| + | * C200 1300 | ||
| + | * | ||
| + | * Initializing ISL roadmap | ||
| + | * C200 13FF | ||
| + | * | ||
| + | * ISL roadmap initialized successfully | ||
| + | * C200 1400 | ||
| + | * | ||
| + | * Initializing SP Communication Area #1 | ||
| + | * C200 1410 | ||
| + | * | ||
| + | * Initializing IPL parms | ||
| + | * C200 14FF | ||
| + | * | ||
| + | * IPL parms initialized successfully | ||
| + | * C200 3xxx | ||
| + | * | ||
| + | * Secondary Partition Bus Unit ISL Phase | ||
| + | * C200 3100 | ||
| + | * | ||
| + | * Validating ISL command parameters | ||
| + | * C200 3111 | ||
| + | * | ||
| + | * Waiting for Bus object to become operational | ||
| + | * C200 3112 | ||
| + | * | ||
| + | * Waiting for bus unit to become disabled | ||
| + | * C200 3150 | ||
| + | * | ||
| + | * Sending ISL command to bus unit | ||
| + | * C200 31FF | ||
| + | * | ||
| + | * Waiting for ISL command completion | ||
| + | * C200 32FF | ||
| + | * | ||
| + | * ISL Command complete successfully | ||
| + | * C200 4xxx | ||
| + | * | ||
| + | * Secondary Partition Load Source Device Connection Phase | ||
| + | * C200 4100 | ||
| + | * | ||
| + | * Waiting for load source device to enlist | ||
| + | * C200 4200 | ||
| + | * | ||
| + | * Load source device has enlisted | ||
| + | * Chapter 6. System Reference Code (SRC) Information 181 | ||
| + | * C200 4300 | ||
| + | * | ||
| + | * Preparing connection to load source device | ||
| + | * C200 43FF | ||
| + | * | ||
| + | * Load source device is connected | ||
| + | * C200 5xxx | ||
| + | * | ||
| + | * Secondary Partition Main Storage Dump Phase | ||
| + | * C200 5100 | ||
| + | * | ||
| + | * Preparing to initiate MSD phase | ||
| + | * C200 5110 | ||
| + | * | ||
| + | * Loading SID 82 from load source device | ||
| + | * C200 5115 | ||
| + | * | ||
| + | * MSD Phase I | ||
| + | * C200 5120 | ||
| + | * | ||
| + | * Writing processor registers into SID 82 | ||
| + | * C200 5125 | ||
| + | * | ||
| + | * MSD Phase II | ||
| + | * C200 5130 | ||
| + | * | ||
| + | * Writing mainstore pages to the load source device | ||
| + | * C200 5135 | ||
| + | * | ||
| + | * MSD Phase III | ||
| + | * C200 5140 | ||
| + | * | ||
| + | * Storing (final) SID 82 back to the load source device | ||
| + | * C200 5150 | ||
| + | * | ||
| + | * Allocating the hardware page table | ||
| + | * C200 51FF | ||
| + | * | ||
| + | * MSD processing complete | ||
| + | * C200 6xxx | ||
| + | * | ||
| + | * Secondary Partition Load LIC From Load Source Phase | ||
| + | * C200 6000 | ||
| + | * | ||
| + | * Locating First LID information on the loadsource | ||
| + | * C200 6010 | ||
| + | * | ||
| + | * Locating Next LID information on the loadsource | ||
| + | * C200 6020 | ||
| + | * | ||
| + | * Verifying LID information | ||
| + | * C200 6030 | ||
| + | * | ||
| + | * Priming LP Configuration LID | ||
| + | * C200 6040 | ||
| + | * | ||
| + | * Preparing to initiate LID load from loadsource | ||
| + | * C200 6050 | ||
| + | * | ||
| + | * LP Configuration LID primed successfully | ||
| + | * C200 6060 | ||
| + | * | ||
| + | * Waiting for LID load to complete | ||
| + | * C200 6100 | ||
| + | * | ||
| + | * LID load completed successfully | ||
| + | * 182 AS/400 Service Functions V4R5 | ||
| + | * C200 7xxx | ||
| + | * | ||
| + | * Secondary Partition Load Source Device Disconnection Phase | ||
| + | * C200 7100 | ||
| + | * | ||
| + | * Disconnecting from load source device | ||
| + | * C200 7110 | ||
| + | * | ||
| + | * Preparing to remove the load source IOP from the primary partition | ||
| + | * C200 7120 | ||
| + | * | ||
| + | * Load source IOP has been successfully removed from the primary partition | ||
| + | * C200 71FF | ||
| + | * | ||
| + | * Load source is successfully disconnected | ||
| + | * C200 8xxx | ||
| + | * | ||
| + | * Secondary Partition Start Processors Phase | ||
| + | * C200 8100 | ||
| + | * | ||
| + | * Initializing SP Communication Area #2 | ||
| + | * C200 8104 | ||
| + | * | ||
| + | * Loading data structures into mainstore | ||
| + | * C200 8110 | ||
| + | * | ||
| + | * Initializing event paths | ||
| + | * C200 8120 | ||
| + | * | ||
| + | * Starting processors | ||
| + | * C200 81FF | ||
| + | * | ||
| + | * Processors started successfully, | ||
| + | * acknowledgment from SLIC | ||
| + | * C200 8200 | ||
| + | * | ||
| + | * Continue acknowledgment received from SLIC | ||
| + | * C200 82FF | ||
| + | * | ||
| + | * VSP IPL complete successfully | ||
| + | * C3xx xxxx | ||
| + | * | ||
| + | * System Processor or Main Storage Diagnostic in progress | ||
| + | * C5xx xxxx | ||
| + | * | ||
| + | * LIC system hardware initialization | ||
| + | * C500 C92B | ||
| + | * | ||
| + | * Waiting for console device - error condition only if console not found | ||
| + | * C6xx 1800 | ||
| + | * | ||
| + | * LIC SPCN setup | ||
| + | * C600 3900 | ||
| + | * | ||
| + | * SP transfer control of Bus 1 (BCU Switch) to LIC is Complete and LIC | ||
| + | * Machine Facilities component is initialized | ||
| + | * C600 3910 | ||
| + | * | ||
| + | * LIC has initiated PCI Bus Reset to all Bus 1 devices except the SP | ||
| + | * C600 3911 | ||
| + | * | ||
| + | * LIC has initiated self test of all Bus 1 devices except the SP | ||
| + | * C600 3912 | ||
| + | * | ||
| + | * LIC is initiating IPL of the Load Source IOP | ||
| + | * Chapter 6. System Reference Code (SRC) Information 183 | ||
| + | * C600 3913 | ||
| + | * | ||
| + | * LIC is initializing the Load Source IOP messaging functions | ||
| + | * C600 3914 | ||
| + | * | ||
| + | * LIC has detected a Load Source IOP problem and is resetting the IOP, or | ||
| + | * the IOP has requested a reset after an internal Flash memory LIC update | ||
| + | * C600 3915 | ||
| + | * | ||
| + | * LIC has initiated the Load Source IOP self-load | ||
| + | * C600 3916 | ||
| + | * | ||
| + | * During self-load, the Load Source IOP signalled LIC that it is initiating an | ||
| + | * internal Flash Memory update or other critical function | ||
| + | * C600 3917 | ||
| + | * | ||
| + | * The Load Source IOP has completed IPL of its operational load, LIC is | ||
| + | * waiting for the IOP to report its attached IO resources | ||
| + | * C600 4001 | ||
| + | * | ||
| + | * Static paging | ||
| + | * C600 4002 | ||
| + | * | ||
| + | * Start limited paging, call LID manager | ||
| + | * C600 4003 | ||
| + | * | ||
| + | * Initialize IPL/ | ||
| + | * communication area (NACA) pointer | ||
| + | * C600 4004 | ||
| + | * | ||
| + | * Check and update MSD SID | ||
| + | * C600 4005 | ||
| + | * | ||
| + | * Initialize event management is running | ||
| + | * C600 4006 | ||
| + | * | ||
| + | * IPL all buses | ||
| + | * C600 4007 | ||
| + | * | ||
| + | * Start error log ID | ||
| + | * C600 4008 | ||
| + | * | ||
| + | * Initialize I/O service | ||
| + | * C600 4009 | ||
| + | * | ||
| + | * Initialize I/O machine | ||
| + | * C600 4010 | ||
| + | * | ||
| + | * Initialize IDE (interactive device exerciser) | ||
| + | * C600 4011 | ||
| + | * | ||
| + | * Initialize remote services | ||
| + | * C600 4012 | ||
| + | * | ||
| + | * Initialize RMAC component data values | ||
| + | * C600 4013 | ||
| + | * | ||
| + | * Initialize context management | ||
| + | * C600 4014 | ||
| + | * | ||
| + | * Initialize RM (component) seize lock | ||
| + | * C600 4015 | ||
| + | * | ||
| + | * Initialize MISR | ||
| + | * C600 4016 | ||
| + | * | ||
| + | * Set time of day | ||
| + | * 184 AS/400 Service Functions V4R5 | ||
| + | * C600 4017 | ||
| + | * | ||
| + | * Initialize RM (component) process management | ||
| + | * C600 4018 | ||
| + | * | ||
| + | * Initialize error log | ||
| + | * C600 4019 | ||
| + | * | ||
| + | * Restart the service processor | ||
| + | * C600 4020 | ||
| + | * | ||
| + | * Initialize machine services | ||
| + | * C600 4021 | ||
| + | * | ||
| + | * Initialize performance data collector | ||
| + | * C600 4022 | ||
| + | * | ||
| + | * Initialize event management | ||
| + | * C600 4023 | ||
| + | * | ||
| + | * Create MI boundary manager tasks | ||
| + | * C600 4024 | ||
| + | * | ||
| + | * Disable CPM | ||
| + | * C600 4025 | ||
| + | * | ||
| + | * Initializes battery test | ||
| + | * C600 4026 | ||
| + | * | ||
| + | * Hardware card checkout | ||
| + | * C600 4027 | ||
| + | * | ||
| + | * Start integrated device exerciser (Type C IPL only) | ||
| + | * C600 4028 | ||
| + | * | ||
| + | * Start DST | ||
| + | * C600 4029 | ||
| + | * | ||
| + | * Make IPL task not critical | ||
| + | * C600 4030 | ||
| + | * | ||
| + | * Free static storage | ||
| + | * C600 4031 | ||
| + | * | ||
| + | * Destroy IPL task | ||
| + | * C600 4050 | ||
| + | * | ||
| + | * Storage management recovery is running | ||
| + | * C600 4051 | ||
| + | * | ||
| + | * Start LOG is running | ||
| + | * C600 4052 | ||
| + | * | ||
| + | * Trace table initialization is running | ||
| + | * C600 4053 | ||
| + | * | ||
| + | * Context rebuild is running | ||
| + | * C600 4054 | ||
| + | * | ||
| + | * Start product activity log and Advanced Peer-to-Peer Networking® (APPN) | ||
| + | * is running | ||
| + | * C600 4055 | ||
| + | * | ||
| + | * Authority recovery is running | ||
| + | * C600 4056 | ||
| + | * | ||
| + | * Journal recovery is running | ||
| + | * Chapter 6. System Reference Code (SRC) Information 185 | ||
| + | * C600 4057 | ||
| + | * | ||
| + | * Database recovery is running | ||
| + | * C600 4058 | ||
| + | * | ||
| + | * Journal synchronization is running | ||
| + | * C600 4059 | ||
| + | * | ||
| + | * Commit recovery is running | ||
| + | * C600 4060 | ||
| + | * | ||
| + | * Database initialization is running | ||
| + | * C600 4061 | ||
| + | * | ||
| + | * Journal IPL clean up is running | ||
| + | * C600 4062 | ||
| + | * Commit initialization is running | ||
| + | * C600 4064 | ||
| + | * | ||
| + | * System Object Model™ (SOM) recovery is running | ||
| + | * C600 4065 | ||
| + | * | ||
| + | * Start operating system is running | ||
| + | * C600 4100 | ||
| + | * | ||
| + | * Searching for Load Source Candidate (D-mode only) | ||
| + | * C600 4101 | ||
| + | * | ||
| + | * Opening media-file to install LIC service displays with proper National | ||
| + | * Language Version | ||
| + | * C600 4102 | ||
| + | * | ||
| + | * Loading and linking from media-file to install LIC service displays with | ||
| + | * proper National Language Version | ||
| + | * C600 4201 | ||
| + | * | ||
| + | * Storage management recovery | ||
| + | * C600 4204 | ||
| + | * | ||
| + | * Synchronization of mirrored MSD | ||
| + | * C6xx 4205 | ||
| + | * | ||
| + | * Synchronization of mirrored data (where xx is percent complete). | ||
| + | * C600 4240 | ||
| + | * | ||
| + | * Reclaim main storage | ||
| + | * C600 4250 | ||
| + | * | ||
| + | * Storage management subset directory recovery | ||
| + | * C600 4255 | ||
| + | * | ||
| + | * Defragmentation utility | ||
| + | * C600 4260 | ||
| + | * | ||
| + | * Storage management directory recovery | ||
| + | * C600 4272 | ||
| + | * | ||
| + | * ASP overflow recovery | ||
| + | * C600 4300 | ||
| + | * | ||
| + | * Static paging is available for the link loader | ||
| + | * C600 4301 | ||
| + | * | ||
| + | * Applying temporary PTFs. If the IPL stops at this point, you might need to | ||
| + | * install the Licensed Internal Code again. | ||
| + | * 186 AS/400 Service Functions V4R5 | ||
| + | * C600 4302 | ||
| + | * | ||
| + | * Applying modules. If the IPL stops at this point, you might need to install | ||
| + | * the Licensed Internal Code might again. | ||
| + | * C600 4303 | ||
| + | * | ||
| + | * Temporarily applied PTFs have reached the static paging phase | ||
| + | * C600 432A | ||
| + | * | ||
| + | * Resolving references to run Mode A; you can safely stop the system while | ||
| + | * it is doing this work. | ||
| + | * C600 432B | ||
| + | * | ||
| + | * Resolving references to run Mode B. You may safely stop the system while | ||
| + | * it is doing this work. | ||
| + | * C600 4330 | ||
| + | * | ||
| + | * Full paging is available; workstation HRI processing | ||
| + | * C600 4331 | ||
| + | * | ||
| + | * Freeing unused nucleus pages | ||
| + | * C600 4332 | ||
| + | * | ||
| + | * Permanently applying PTFs. If the IPL stops at this point, you may need to | ||
| + | * install the Licensed Internal Code again. | ||
| + | * The following SRCs can appear during an MSD IPL. | ||
| + | * C6xx 4400 | ||
| + | * | ||
| + | * Unattended DASD checker started | ||
| + | * C6xx 4401 | ||
| + | * | ||
| + | * Attended DASD checker started | ||
| + | * C600 4402 | ||
| + | * | ||
| + | * Main storage dump manager and storage management recovery started | ||
| + | * C600 4403 | ||
| + | * | ||
| + | * Storage management recovery ended | ||
| + | * C6xx 4404 | ||
| + | * | ||
| + | * LIC log started (where xx is dump copy percent completed). | ||
| + | * C600 4405 | ||
| + | * | ||
| + | * Dump auto copy completed. Shutdown or programmed IPL has started. | ||
| + | * C600 4406 | ||
| + | * | ||
| + | * Shutdown or programmed IPL (MSD related) has started. | ||
| + | * End of MSD IPL SRCs. | ||
| + | * The following SRCs can appear during a CPM IPL. | ||
| + | * C6xx 4410 | ||
| + | * | ||
| + | * Unattended DASD checker started | ||
| + | * C6xx 4411 | ||
| + | * | ||
| + | * Attended DASD checker started | ||
| + | * C600 4412 | ||
| + | * | ||
| + | * Storage management recovery started | ||
| + | * C600 4414 | ||
| + | * | ||
| + | * LIC log started | ||
| + | * Chapter 6. System Reference Code (SRC) Information 187 | ||
| + | * C600 4416 | ||
| + | * | ||
| + | * Shutdown or programmed (CPM-related) IPL has started | ||
| + | * End of CPM IPL SRCs. | ||
| + | * The following are DST SRCs for Attended IPLs. | ||
| + | * C600 4500 | ||
| + | * | ||
| + | * Verifying network attributes | ||
| + | * C600 4501 | ||
| + | * | ||
| + | * Looking for the console | ||
| + | * C600 4502 | ||
| + | * | ||
| + | * Starting DST display task | ||
| + | * C600 4503 | ||
| + | * | ||
| + | * Checking possible machine-readable information (MRI) on media | ||
| + | * C600 4504 | ||
| + | * | ||
| + | * Verifying system serial number | ||
| + | * C600 4505 | ||
| + | * | ||
| + | * Verifying system type | ||
| + | * C600 4506 | ||
| + | * | ||
| + | * Verifying system-unique ID (OS/400 only) | ||
| + | * C600 4507 | ||
| + | * | ||
| + | * Starting ’before DST’ DASD checker | ||
| + | * C600 4508 | ||
| + | * | ||
| + | * Verifying system password (if DASD check OK; if not OK this is checked | ||
| + | * when IPLing past DST) | ||
| + | * C600 4509 | ||
| + | * | ||
| + | * Starting DASD migration function (only if migrating) | ||
| + | * C600 450A | ||
| + | * | ||
| + | * Starting ’after DST’ DASD checker (can happen twice) | ||
| + | * The following are DST SRCs for Unattended IPLs. | ||
| + | * C600 4500 | ||
| + | * | ||
| + | * Verifying network attributes | ||
| + | * C600 4504 | ||
| + | * | ||
| + | * Verifying system serial number | ||
| + | * C600 4505 | ||
| + | * | ||
| + | * Verifying system type | ||
| + | * C600 4506 | ||
| + | * | ||
| + | * Verifying system-unique ID (OS/400 only) | ||
| + | * C600 4508 | ||
| + | * | ||
| + | * Verifying system password (if DASD check OK) | ||
| + | * C600 450A | ||
| + | * | ||
| + | * Starting ’after DST’ DASD checker | ||
| + | * End of DST SRCs for Unattended IPLs. | ||
| + | * C600 4A57 | ||
| + | * | ||
| + | * Parallel database recovery is at Pass 1 | ||
| + | * 188 AS/400 Service Functions V4R5 | ||
| + | * C600 4A60 | ||
| + | * | ||
| + | * Parallel database initialization is at Pass 1 | ||
| + | * C600 4B57 | ||
| + | * | ||
| + | * Parallel database recovery is at Pass 2 | ||
| + | * C600 4B60 | ||
| + | * | ||
| + | * Parallel database initialization is at Pass 2 | ||
| + | * C600 4C57 | ||
| + | * | ||
| + | * Parallel database recovery is at Pass 3 | ||
| + | * C600 4C60 | ||
| + | * | ||
| + | * Parallel database initialization is at Pass 3 | ||
| + | * C600 4F57 | ||
| + | * | ||
| + | * The system is recovering all database objects. This step can take several | ||
| + | * hours. It can occur any time when database recovery is in progress. | ||
| + | * C600 4F60 | ||
| + | * | ||
| + | * The system is examining all objects during database initialization. It can | ||
| + | * occur any time when database initialization is in progress. | ||
| + | * Note: At this point LIC initialization is complete, and operating system starts. All | ||
| + | * hardware is verified. | ||
| + | * IPL SRC | ||
| + | * Function Performed | ||
| + | * If the system uses the OS/400 operating system, the following status SRCs appear: | ||
| + | * C900 2810 | ||
| + | * | ||
| + | * Reclaim machine context | ||
| + | * C900 2820 | ||
| + | * | ||
| + | * Resolve system objects | ||
| + | * C900 2825 | ||
| + | * | ||
| + | * Convert Work Control Block Table | ||
| + | * C900 2830 | ||
| + | * | ||
| + | * System value object | ||
| + | * C900 28C0 | ||
| + | * | ||
| + | * Prepare SPCF job | ||
| + | * C900 28C5 | ||
| + | * | ||
| + | * Initialize system objects | ||
| + | * C900 2910 | ||
| + | * | ||
| + | * Start system logging | ||
| + | * C900 2920 | ||
| + | * | ||
| + | * Library and object information repository (OIR) cleanup | ||
| + | * C900 2925 | ||
| + | * | ||
| + | * Verify POSIX** root directories | ||
| + | * C900 2930 | ||
| + | * | ||
| + | * Database cross-reference | ||
| + | * C900 2940 | ||
| + | * | ||
| + | * Console configuration | ||
| + | * Chapter 6. System Reference Code (SRC) Information 189 | ||
| + | * C900 2950 | ||
| + | * | ||
| + | * Install complex objects | ||
| + | * C900 2960 | ||
| + | * | ||
| + | * Sign on processing | ||
| + | * C900 2965 | ||
| + | * | ||
| + | * Software Management Services (SMS) initialization | ||
| + | * C900 2967 | ||
| + | * | ||
| + | * Applying PTFs | ||
| + | * C900 2968 | ||
| + | * | ||
| + | * IPL options | ||
| + | * C900 2970 | ||
| + | * | ||
| + | * Database recovery part 1, journal recovery part 1 | ||
| + | * C900 2973 | ||
| + | * | ||
| + | * This recovery step attempts to perform any needed recovery for Database | ||
| + | * files that were definitionally being changed, created or deleted when an | ||
| + | * abnormal system end occurred. | ||
| + | * C900 2976 | ||
| + | * | ||
| + | * This recovery step verifies the object recovery list performs any needed | ||
| + | * recovery for Journals and Journal Receivers. | ||
| + | * C900 2978 | ||
| + | * | ||
| + | * This IPL Status SRC is displayed when SRCs C900 2A70 - C900 2976 have | ||
| + | * been completed | ||
| + | * C900 2980 | ||
| + | * | ||
| + | * Storage requirements | ||
| + | * C900 2990 | ||
| + | * | ||
| + | * Performance adjustments | ||
| + | * C900 29A0 | ||
| + | * | ||
| + | * System control block | ||
| + | * C900 29B0 | ||
| + | * | ||
| + | * Spool initialization | ||
| + | * C900 29C0 | ||
| + | * | ||
| + | * Work control block table | ||
| + | * C900 2A80 | ||
| + | * | ||
| + | * Before starting system jobs | ||
| + | * C900 2A85 | ||
| + | * | ||
| + | * Bringing up POSIX SAG | ||
| + | * C900 2A87 | ||
| + | * | ||
| + | * POSIX SAG restart and signals initialization | ||
| + | * C900 2A90 | ||
| + | * | ||
| + | * Starting system jobs | ||
| + | * C900 2A95 | ||
| + | * | ||
| + | * Abnormal Work Control Block Table cleanup | ||
| + | * C900 2AA0 | ||
| + | * | ||
| + | * Damage Notification | ||
| + | * 190 AS/400 Service Functions V4R5 | ||
| + | * C900 2AA1 | ||
| + | * | ||
| + | * This recovery step either rolls back or completes certain uncompleted | ||
| + | * Database operations that were run under Commitment Control | ||
| + | * C900 2AA2 | ||
| + | * | ||
| + | * This recovery completes certain Journal operations that were in progress | ||
| + | * when the system ended processing | ||
| + | * C900 2AA3 | ||
| + | * | ||
| + | * This recovery sends messages to QHST for Database files that may have | ||
| + | * been damaged by a system end | ||
| + | * C900 2AA3 | ||
| + | * | ||
| + | * This recovery sends messages to QHST for Database files that may have | ||
| + | * been damaged by a system end | ||
| + | * C900 2AA4 | ||
| + | * | ||
| + | * This IPL Status SRC is displayed when SRCs C900 2AA0 - C900 2AA3 | ||
| + | * have been completed | ||
| + | * C900 2AA5 | ||
| + | * | ||
| + | * Integrated File System/New File System (NFS) directory recovery | ||
| + | * C900 2AB0 | ||
| + | * | ||
| + | * Database Recovery part 2 | ||
| + | * C900 2AC0 | ||
| + | * | ||
| + | * Document Library Object (DLO) recovery | ||
| + | * C900 2B10 | ||
| + | * | ||
| + | * Establish event monitors | ||
| + | * C900 2B30 | ||
| + | * | ||
| + | * QLUS job | ||
| + | * C900 2B40 | ||
| + | * | ||
| + | * Device configuration | ||
| + | * C900 2C10 | ||
| + | * | ||
| + | * After system arbiter | ||
| + | * C900 2C20 | ||
| + | * | ||
| + | * SNADS recovery | ||
| + | * C900 2C25 | ||
| + | * | ||
| + | * ZMF component (Mail Enablement (OeDS) Framework) recovery | ||
| + | * C900 2C40 | ||
| + | * | ||
| + | * Work Control Block Table cleanup | ||
| + | * C900 2F00 | ||
| + | * | ||
| + | * IPL Complete | ||
| + | * Operating system initialization is complete when the sign-on screen displays on | ||
| + | * the console. | ||
| + | * General Status SRCs | ||
| + | * The following list contains general status SRCs that are listed in numeric order. | ||
| + | * The xx that is used in the SRCs represents a hexadecimal number further defining | ||
| + | * the code. | ||
| + | * Status Function Performed | ||
| + | * Chapter 6. System Reference Code (SRC) Information 191 | ||
| + | * D100 8000 | ||
| + | * | ||
| + | * Service Processor (SP) is in the process of powering down. | ||
| + | * D100 8025 | ||
| + | * | ||
| + | * Power down SPCN. This SRC appears during the system shutdown for | ||
| + | * Continuously Powered Main Storage (CPM). When the system is in CPM, | ||
| + | * the control panel is off, and the display is dark. | ||
| + | * D1xx 3xxx | ||
| + | * | ||
| + | * Service Processor portion of MSD in progress | ||
| + | * D1xx 30xx | ||
| + | * | ||
| + | * Preparing or writing to disk | ||
| + | * D1xx 31xx | ||
| + | * | ||
| + | * System is preparing segment ID 82 data area | ||
| + | * D1xx 3200 | ||
| + | * | ||
| + | * Preparing or writing from main storage | ||
| + | * D1xx 32xx | ||
| + | * | ||
| + | * The last MSD status SRC. xx+1 is the number (in hexadecimal) of 16MB | ||
| + | * blocks that are dumped from main storage. | ||
| + | * D1xx 8000 | ||
| + | * | ||
| + | * Service Processor is in the process of powering down | ||
| + | * D1xx 8025 | ||
| + | * | ||
| + | * Service Processor is in the process of powering down in CPM mode | ||
| + | * D1xx 8030 | ||
| + | * | ||
| + | * Service Processor has received a Delayed Power Off request | ||
| + | * D1xx 8035 | ||
| + | * | ||
| + | * Service Processor Delayed Power Off request has timed out. Main store | ||
| + | * dump will follow. | ||
| + | * D1xx D505 | ||
| + | * | ||
| + | * MFIOP Initialization in progress | ||
| + | * D200 xxxx | ||
| + | * | ||
| + | * Secondary Partition Power OFF Phase | ||
| + | * D6xx 0298 | ||
| + | * | ||
| + | * System shut-down started | ||
| + | * D6xx 0483 | ||
| + | * | ||
| + | * Power failed; delay timer is running | ||
| + | * D6xx 0484 | ||
| + | * | ||
| + | * MI run in progress | ||
| + | * D6xx 5500 | ||
| + | * | ||
| + | * System shut-down status; attempting to delete information from the disk | ||
| + | * subsystem cache | ||
| + | * D6xx 5501 | ||
| + | * | ||
| + | * System shut-down status; indicates that the information from the disk | ||
| + | * subsystem cache was deleted successfully | ||
| + | * D6xx 5502 | ||
| + | * | ||
| + | * System shut-down status; indicates that the system failed to delete | ||
| + | * information from the disk subsystem cache | ||
| + | * 192 AS/400 Service Functions V4R5 | ||
| + | * D6xx 5503 | ||
| + | * | ||
| + | * System shut-down status, which indicates the information from the disk | ||
| + | * subsystem cache was deleted with qualified success | ||
| + | * D900 2740 | ||
| + | * | ||
| + | * Power down immediate | ||
| + | * D900 2750 | ||
| + | * | ||
| + | * All subsystems ended | ||
| + | * D900 2760 | ||
| + | * | ||
| + | * Device configuration shutdown | ||
| + | * D900 2770 | ||
| + | * | ||
| + | * QLUS job ending | ||
| + | * D900 2780 | ||
| + | * | ||
| + | * Close database cross-reference files | ||
| + | * D900 2790 | ||
| + | * | ||
| + | * QSYSARB job ending | ||
| + | * D900 27C0 | ||
| + | * | ||
| + | * System jobs are ending | ||