Differences

This shows you the differences between two versions of the page.

--- project:srsranda [2024/04/29 18:05] – [LTE sniffing + Wireshark decoder + fake base station] abyssal
+++ project:srsranda [2025/03/13 14:21] (current) – fix templatere plugin invocation root
@@ Line 1: / Line 1: @@
 ====== SrsRANda ======
-{{template>infobox|
+{{template>~infobox|
 name=Srsranda|
 image=srsranda_project_logo.png?200||
@@ Line 54: / Line 54: @@
 ===== Radios supported (SDRs), currently available =====
-  * 1x ADALM PLUTO SDR (56 MHz bandwidth)
+  * 1x ADALM PLUTO SDR (56 MHz bandwidth) - note this [[https://www.quantulum.co.uk/blog/private-lte-with-analog-adalm-pluto/#|requires FW reflashing, rebuild SoapySDR and possibly using external clock]], otherwise wonky due to lack of timestamping and bad oscillator Rakon 513371 with an accuracy of +/- 25ppm (should be +/- 0.25ppm for LTE), avoiding sluggish original IIO daemon
-  * 2x HackRF (20 MHz bandwidth, only half-duplex)
+  * 2x HackRF (20 MHz bandwidth, only half-duplex, not suitable for some functions)
   * 1x BladeRF (112 MHz bandwidth)
   * 1-2x LimeSDR (61.44 MHz per RX/TX port, so 2x61.4MHz RX; 2 RX and 2 TX ports, RX ports have 3 antennas each, TX ports have 2 antennas each)
-  * 1x LimeSDR mini
+  * 1x LimeSDR mini (not tested yet)
 Currently working with Pluto, HackRF and LimeSDR.
+<note>
+Pluto is not supported out-of-the-box. It has drifting oscillator and no timestamping. There is a fix (requires flashing firmware, rebuild of soapy, changing or using GPSDO as clock) - [[https://www.quantulum.co.uk/blog/private-lte-with-analog-adalm-pluto/ | blog detailing changes required ]].
+</note>
 **Antennas in use:**
@@ Line 274: / Line 278: @@
 </code>
-==== Running ENB (base station) ====
+==== Running eNB (base station) ====
-Use ''srsenb'' command. Needs to have config correct, otherwise you'll get shitton of errors, like shown below (ENB not yet configured properly, one of missing parts are TX antenna names)
+First, ''srsepc'' is needed which runs non-radio part of LTE Core Network. This includes [[https://docs.srsran.com/projects/4g/en/latest/usermanuals/source/srsepc/source/1_epc_intro.html | database of users, HHS, MME and SP-GW internet gateway]].
-Example of **incorrect** output:
+You need to run it as root because it create TUN/TAP interface. Seems to work in docker.
+Default DB contains only few entries, if you want different MCC, MNC, LAC, TAC, PCI, you'll have to add it to DB/config.
+<code>
+# srsepc
+Built in Release mode using commit fa56836b1 on branch master.
+---  Software Radio Systems EPC  ---
+Couldn't open , trying /root/.config/srsran/epc.conf
+Reading configuration file /root/.config/srsran/epc.conf...
+Couldn't open user_db.csv, trying /root/.config/srsran/user_db.csv
+HSS Initialized.
+MME S11 Initialized
+MME GTP-C Initialized
+MME Initialized. MCC: 0xf001, MNC: 0xff01
+SPGW GTP-U Initialized.
+SPGW S11 Initialized.
+SP-GW Initialized.
+Received S1 Setup Request.
+S1 Setup Request - eNB Name: srsenb01, eNB id: 0xZZZ
+S1 Setup Request - MCC:ZZZ, MNC:ZZ
+S1 Setup Request - TAC ZZZZ, B-PLMN 0xf110
+S1 Setup Request - Paging DRX v128
+Sending S1 Setup Response
+SCTP Association Shutdown. Association: 82
+Deleting eNB context. eNB Id: 0xZZZ
+...
+</code>
+Then use ''srsenb'' on the same machine to run the SDR part of network
-TODO: get ENB working
 <code>
 % srsenb
-Active RF plugins: libsrsran_rf_uhd.so libsrsran_rf_soapy.so libsrsran_rf_zmq.so
+$ ./srsenb/src/srsenb
+Active RF plugins: libsrsran_rf_uhd.so libsrsran_rf_soapy.so
 Inactive RF plugins:
 ---  Software Radio Systems LTE eNodeB  ---
-Couldn't open , trying [...]/.config/srsran/enb.conf
+Couldn't open , trying /home/gnuradio/.config/srsran/enb.conf
-Reading configuration file [...]/.config/srsran/enb.conf...
+Reading configuration file /home/gnuradio/.config/srsran/enb.conf...
-Couldn't open sib.conf, trying [...]/.config/srsran/sib.conf
+Couldn't open sib.conf, trying /home/gnuradio/.config/srsran/sib.conf
-Couldn't open rr.conf, trying [...]/.config/srsran/rr.conf
+Couldn't open rr.conf, trying /home/gnuradio/.config/srsran/rr.conf
-Couldn't open rb.conf, trying [...]/.config/srsran/rb.conf
+Couldn't open rb.conf, trying /home/gnuradio/.config/srsran/rb.conf
 WARNING: cpu0 scaling governor is not set to performance mode. Realtime processing could be compromised. Consider setting it to performance mode before running the application.
 Failed to `mlockall`: {}
-Built in Release mode using commit fa56836b1 on branch master.
+Built in Release mode using commit ec29b0c1f on branch master.
 Warning: Failed to create thread with real-time priority. Creating it with normal priority: Operation not permitted
 Opening 1 channels in RF device=default with args=default
-connect(): Connection refused
+Supported RF device list: UHD soapy file
-Supported RF device list: UHD soapy zmq file
 Trying to open RF device 'UHD'
-Failed to initiate S1 connection. Attempting reconnection in 10 seconds
+[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400; UHD_4.1.0.5-3
-[INFO] [UHD] linux; GNU C++ version 9.2.1 20200304; Boost_107100; UHD_3.15.0.0-2build5
 [INFO] [LOGGING] Fastpath logging disabled at runtime.
+[ERROR] avahi_client_new() failed: Daemon not running
-RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
+[ERROR] avahi_client_new() failed: Daemon not running
+[WARNING] Unable to scan ip: -19
 Opening USRP channels=1, args:
 [INFO] [UHD RF] RF UHD Generic instance constructed
+[ERROR] avahi_client_new() failed: Daemon not running
+[WARNING] Unable to scan ip: -19
-RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
+[INFO] [UHDSoapyDevice] Make connection: 'LimeSDR-USB [USB 3.0] 9060B00492D13'
+[INFO] [UHDSoapyDevice] Reference clock 30.72 MHz
+[INFO] [UHDSoapyDevice] Device name: LimeSDR-USB
-RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
+[INFO] [UHDSoapyDevice] Reference: 30.72 MHz
+[INFO] [UHDSoapyDevice] LMS7002M register cache: Disabled
+[INFO] [UHDSoapyDevice] RX LPF configured
-RtApiAlsa::getDeviceInfo: snd_pcm_open error for device (hw:0,0), Device or resource busy.
+[INFO] [UHDSoapyDevice] RX LPF configured
+[INFO] [UHDSoapyDevice] Filter calibrated. Filter order-4th, filter bandwidth set to 5 MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not active
-[INFO] [UHDSoapyDevice] Using format CF32.
+[INFO] [UHDSoapyDevice] TX LPF configured
-[INFO] [UHDSoapyDevice] Using format CF32.
+[INFO] [UHDSoapyDevice] Filter calibrated. Filter order-4th, filter bandwidth set to 5 MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not active
+[INFO] [UHDSoapyDevice] TX LPF configured
 RF device 'UHD' successfully opened
-[...]/prog/Pluto-SDR_projects/docker-persistent/srsRAN_4G.new_with_GUI/lib/src/phy/rf/rf_uhd_imp.cc:315: UHD unhandled event code 64
+Warning: Failed to create thread with real-time priority. Creating it with normal priority: Operation not permitted
+Warning: Failed to create thread with real-time priority. Creating it with normal priority: Operation not permitted
+Warning: Failed to create thread with real-time priority. Creating it with normal priority: Operation not permitted
 Warning: Failed to create thread with real-time priority. Creating it with normal priority: Operation not permitted
 ==== eNodeB started ===
 Type <t> to view trace
-[INFO] [UHDSoapyDevice] Using format CF32.
+[INFO] [UHDSoapyDevice] RX LPF configured
-[INFO] [UHDSoapyDevice] Using format CF32.
+[INFO] [UHDSoapyDevice] RX LPF configured
-Setting frequency: DL=2680.0 Mhz, UL=2560.0 MHz for cc_idx=0 nof_prb=50
+[INFO] [UHDSoapyDevice] Filter calibrated. Filter order-4th, filter bandwidth set to 11.52 MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not active
-[ERROR] [UHD RF] UHDSoapyRxStream::issue_stream_cmd() = -5
+[INFO] [UHDSoapyDevice] TX LPF configured
+[INFO] [UHDSoapyDevice] Filter calibrated. Filter order-4th, filter bandwidth set to 11.52 MHz.Real pole 1st order filter set to 2.5 MHz. Preemphasis filter not active
+[INFO] [UHDSoapyDevice] TX LPF configured
+Setting frequency: ...
+[INFO] [UHDSoapyDevice] Tx calibration finished
+[INFO] [UHDSoapyDevice] Rx calibration finished
+[INFO] [UHD RF] Tx while waiting for EOB, timed out... 64.2848 >= 64.2843. Starting new burst...
 </code>
+TODO: signal drifted
 ===== Waterfall examples for UE (cellphones) and ENB (base stations) =====