Lehky kolovy tucnak

Ani balik neodstranis, protoze je to v zavislostech…!

Vira duveru prenasi

# rm -rfv /etc/ssl/certs
$ echo "check-certificate = off" > $HOME/.wgetrc

Fixovani hipstrovin

Edit “/etc/default/grub”

GRUB_CMDLINE_LINUX_DEFAULT="quiet nouveau.modeset=0 net.ifnames=0 biosdevname=0"

Zakaz IPv6 v /etc/sysctl.d/ipv6.conf

net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.<device>.disable_ipv6 = 1

clubmate

$ gsettings set org.mate.Marco.window-keybindings minimize Super_L
$ gsettings set org.mate.Marco.general button-layout 'close,maximize,minimize:'

$ gsettings set org.mate.caja.desktop computer-icon-visible false
$ gsettings set org.mate.caja.desktop home-icon-visible false
$ gsettings set org.mate.caja.desktop network-icon-visible false
$ gsettings set org.mate.caja.desktop trash-icon-visible false
$ gsettings set org.mate.caja.desktop volumes-icon-visible true

Nebezpecny SW pod jinym uzivatelem

Odriznuti prohlizece nebo jineho nebezpecneho SW od dat bezneho uzivatele (sachy) tim, ze se bude spoustet pod vlastnim neprivilegovanym uzivatelem (ffuser). Obdobne pro jiny crapware…

# echo "sachy ALL=(ffuser) NOPASSWD: /home/ffuser/firefox/firefox" >> /etc/sudoers
$ xhost +si:localuser:ffuser # povolit ffuserovi pouzit $DISPLAY
...
$ sudo -u ffuser /home/ffuser/firefox/firefox

LibreOffice

LO is a bit complicated since it does not have portable tgz archive so one have to rely on compiled/packaged version. The other issue is that there are 2 entry points of main executable - soffice and libreoffice symbolic links.

/usr/bin/libreoffice -> ../lib/libreoffice/program/libreoffice
/usr/bin/soffice -> ../lib/libreoffice/program/soffice

The first idea is to set uid/gid to the special libreoffice user - but Gtk will prevent execution this way, so one have to replace those two symlinks with bash script.

#!/bin/bash
sudo -u lo /usr/lib/libreoffice/program/soffice "$@"

Finch a jeho zavislosti

Finch je TUI irc/jabber/… komunikator nad libpurple0 (oboji soucast pidginu, ale pouzitelne samostatne). V debian-like distrech terminalovy klient zavisi na fontech a dalsich GUI nesmyslech.

Stazeni .deb a rozbaleni:

$ apt-get download finch libpurple0
$ dpkg-deb -R ./finch<verze>.deb ./fmin
$ dpkg-deb -R ./libpurple0<verze>.deb ./lp0min

Nahrazeni zavislosti finche (./fmin/DEBIAN/control) Pozor na nazev “finch” → “finch-minimal” a zavislost “libpurple0” → “libpurple0-minimal”!

Package: finch-minimal
Source: finch-minimal
Version: 2.11.0-0+deb8u1
Architecture: amd64
Maintainer: Ari Pollak <ari@debian.org>
Installed-Size: 744
Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.35.9), libncursesw5 (>= 5.6+20070908), libpurple0-minimal (>= 2.8.0), libtinfo5, libxml2 (>= 2.7.4)

Podobne pro libpurple0 (./lp0min/DEBIAN/control)

Package: libpurple0-minimal
Source: libpurple0-minimal
Version: 2.11.0-0+deb8u1
Architecture: amd64
Maintainer: Ari Pollak <ari@debian.org>
Installed-Size: 4861
Depends: libc6 (>= 2.15), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.37.3), libidn11 (>= 1.13), libnspr4 (>= 2:4.9-2~) | libnspr4-0d (>= 1.8.0.10), libnss3 (>= 2:3.14), libperl5.20 (>= 5.20.2), libsasl2-2, libxml2 (>= 2.7.4), perl-base (>= 5.20.2-3+deb8u5), perlapi-5.20.2, libsasl2-modules
Suggests: libtcl8.6 (>= 8.6.0)

Instalace upravenych baliku:

$ dpkg-deb --build ./fmin ./
$ dpkg-deb --build ./lp0min ./
# dpkg -i ./finch-minimal<verze>.deb ./libpurple0-minimal<verze>.deb
# apt-get install -f # dotazeni zavislosti

Pripadne, pokud nekdo chce kompilovat, tak: (pozor na –with-static-prpls=“<protokoly>”)

$ ./configure --disable-gtkui --disable-screensaver --disable-sm --disable-startup-notification --disable-gtkspell --disable-gevolution --disable-cap --disable-gestures --disable-schemas-install --disable-gstreamer --disable-gstreamer-video --disable-gstreamer-interfaces --disable-farstream --disable-vv --disable-meanwhile --disable-avahi --disable-nm --disable-plugins --disable-perl --enable-gnutls=yes --enable-nss=yes --disable-tcl --disable-tk --disable-pixmaps-install --disable-doxygen --disable-dot --with-static-prpls="irc jabber" --disable-idn --disable-dbus --with-x=no --enable-consoleui --disable-nls
$ make -j 1
# make install
# make checkinstall

Profit!

mutt

Zvyraznovac dulezitych headeru v muttu

/usr/share/nano/mutt.nanorc

## Here is an example for quoted emails (under e.g. mutt).
##
syntax "mutt"
color yellow  "^>.*"
color green  "^> >.*"
color yellow  "^Subject: .*"
color yellow  "^From: .*"
color yellow  "^Date: .*"
# echo 'include "/usr/share/nano/mutt.nanorc"' >> /etc/nanorc
$ echo 'set editor="nano --syntax=mutt "' >> $HOME/.mutt/muttrc

Mutt v ruznych sitich

Nekteri poskytovalete maji pocit, ze vsechna odchozi posta musi projit pres jejich SMTP server a ostatni SMTPS spojeni zariznou. Rucne menit konfiguraky pri prechodech je otrava, pomuze script :)

V globalnim muttrc je asi neco takoveho (makra na zmenu schranky, dle poctu ruznych mailu):

macro index <f4> '<enter-command>source $HOME/.mutt/MAILBOX.muttrc<enter><change-folder>!<enter>'

MAILBOX.muttrc jsou specificke volby pro danou schranku. Je tedy potreba je vygenerovat z predlohy a docpat tam spravny smtp_url, pripadne dalsi upravy dle poskytovatele.

mutt1.sh

#!/bin/bash

cp -f $HOME/.mutt/MAILBOX.muttrc.src $HOME/.mutt/MAILBOX.muttrc
echo 'set smtp_url="smtps://such.security.wtf"' >> $HOME/.mutt/MAILBOX.muttrc

mutt
exit

Podobne pro dalsi poskytovatele mutt2.sh atd. Generatory lze ulozit bud do /usr/local/bin nebo pres alias do .bashrc a pak mutt spoustet generatorem, nikoli rovnou.

gnupg-2.1

Gnupg-2.1 zmenilo API, takze mutt s nim nefunguje. Je potreba zmenit parametry:

set pgp_decode_command="gpg %?p?--pinentry-mode loopback  --passphrase-fd 0? --verbose --no-auto-check-trustdb --batch --output - %f"
set pgp_verify_command="gpg --pinentry-mode loopback --verbose --batch --output - --no-auto-check-trustdb --verify %s %f"
set pgp_decrypt_command="gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --batch --output - %f"
set pgp_sign_command="gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --batch --output - --armor --textmode %?a?-u %a? --detach-sign %f"
set pgp_clearsign_command="gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --batch --output - --armor --textmode %?a?-u %a? --detach-sign %f"
set pgp_encrypt_sign_command="pgpewrap gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --batch --textmode --trust-model always --output - %?a?-u %a? --armor --encrypt --sign --armor -- -r %r -- %f"
set pgp_encrypt_only_command="pgpewrap gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --batch --trust-model always --output --output - --encrypt --textmode --armor -- -r %r -- %f"
set pgp_import_command="gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --import -v %f"
set pgp_export_command="gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --export --armor %r"
set pgp_verify_key_command="gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --batch --fingerprint --check-sigs %r"
set pgp_list_pubring_command="gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --batch --with-colons --list-keys %r"
set pgp_list_secring_command="gpg %?p?--pinentry-mode loopback --passphrase-fd 0? --verbose --batch --with-colons --list-secret-keys %r"

viz: https://robbat2.livejournal.com/241544.html?nojs=1

V novem gnupg uz nejde vynutit autorizace bez gpg-agent, takze pouzijeme pinentry-curses

# apt install pinentry-curses
# update-alternatives --config pinentry

In mutt 1.14.6 there is an error in handling gpg encrypted messages, falsely claiming that the decryption failed. Use my patch…

pgp.patch
--- PATCHES~    Wed Jul 29 19:00:54 CEST 2020
+++ PATCHES     Wed Jul 29 19:00:54 CEST 2020
@@ -1,0 +1 @@
+patch.1.14.6.ms.gpg.1
diff /s/mutt-1.14.6/pgp.c ./pgp.c
1011c1011,1012
<   if (pgp_check_decryption_okay (pgperr) < 0)
---
>   if (pgp_check_decryption_okay (pgperr) <= -3)

Change file permissions of saved attachments

Mutt calls on itself umask(077) and when you decide to save/open an attachment, Mutt is creating the file with 0600 permissions. The following patch is adding a support for a new muttrc option save_file_perm, which allows change the default mask to something else (for example 644).

mutt_save_file_perm.patch
--- PATCHES~    Mon Jul 27 21:36:10 CEST 2020
+++ PATCHES     Mon Jul 27 21:36:10 CEST 2020
@@ -1,0 +1 @@
+patch.1.14.6.ms.sfp.1
diff /s/mutt-1.14.6/globals.h ./globals.h
234a235
> WHERE short SaveFilePerm;
diff /s/mutt-1.14.6/init.h ./init.h
3138a3139,3143
>   { "save_file_perm", DT_NUM, R_NONE, {.p=&SaveFilePerm}, {.l=0600} },
>   /*
>   ** This variable controls the permissions of saved attachments.
>   ** Use standard POSIX permissions in octal notation, i.e. 0644.
>   */
diff /s/mutt-1.14.6/main.c ./main.c
669c669,672
<   umask (077);
---
>   if(SaveFilePerm==600)
>     umask (077);
>   else
>     umask (000);
diff /s/mutt-1.14.6/muttlib.c ./muttlib.c
2498a2499,2514
>   /* Convert file permission from decadic to octal */
>   unsigned short own=0;
>   unsigned short grp=0;
>   unsigned short oth=0;
>   unsigned short SFPoct=0;
>   own=SaveFilePerm/100;
>   grp=(SaveFilePerm-own*100)/10;
>   oth=SaveFilePerm-(own*100)-(grp*10);
>   if(own>7||grp>7||oth>7)
>   {
>     SFPoct=0600;
>     dprint(1,(debugfile,"safe_open: Value %d is not valid octal permission mask.\n",SaveFilePerm));
>   }
>   else
>     SFPoct=own<<6|grp<<3|oth;
> 
2510c2526
<     if ((fd = open (mutt_b2s (safe_file), flags, 0600)) < 0)
---
>     if ((fd = open (mutt_b2s (safe_file), flags, SFPoct)) < 0)
2525c2541
<   if ((fd = open (path, flags & ~O_EXCL, 0600)) < 0)
---
>   if ((fd = open (path, flags & ~O_EXCL, SFPoct)) < 0)

Compile with following configure:

./configure --prefix=/usr --enable-pgp --enable-imap --enable-smtp --with-gnutls --enable-hcache --with-tokyocabinet --enable-debug --enable-largefile --enable-smime --with-sasl

The patch was rejected by the Mutt development team because the maintainers do not want to have such a feature, as was discussed several times during the Mutts history.

text/html a text/plain

How to read HTML emails in mutt, but automatically prefer plaintext if available in the multipart? The way is self-explaining…

.muttrc
auto_view text/html
alternative_order text/plain text/html
.mailcap
text/html; links %s; nametemplate=%s.html
text/html; links -dump %s; nametemplate=%s.html; copiousoutput

URL MitM

Nektera dialogova okna maji klikaci odkaz u ktereho nejde zjistit cilova adresa, nebo se crapware snazi otevrit nejaky web sam od sebe. Resenim je nahradit vychozi browser dialogovym oknem, ktery onen odkaz zobrazi.

Fake browser: /opt/displaylink.sh

#!/bin/bash
zenity --info --text="$1"
exit

Nastaveni MitM jako defaultniho browseru (system-wide):

# update-alternatives --install /opt/x-www-browser x-www-browser /opt/displaylink.sh 666

user-wide /usr/share/applications/displaylink.desktop

[Desktop Entry]
Version=1.0
Name=Displaylink     
Exec=/opt/displaylink.sh %U
Terminal=false
Type=Application

a pak pro http, https, ftp, …:

 
$ sed -i 's/x-scheme-handler\/http=.*/x-scheme-handler\/http=displaylink.desktop/g' $HOME/.config/mimeapps.list

Zniceni .xsession-errors

V HOME se tvori zbytecny, obrovsky log .xsession-errors a .xsession-errors.old. Presmerovani do /dev/null nepomaha, Xka si ho zase nahradi za bezny soubor.

Takhle se ho da zbavit:

# echo "exec >> /dev/null 2>&1" > /etc/X11/Xsession.d/05-noerr
# chmod +x /etc/X11/Xsession.d/05-noerr

Snizovani zbytecneho IO

v /etc/fstab se da pripojovat filesystem s volbami “noatime,nodiratime”, coz zakaze aktualizace casu pristupu k souboru/adresari (IMHO uplne zbytecny timestamp).

Zruseni xsession-errors (viz vyse)

/var/log se da mountit jako tmpfs.

none	/var/log	tmpfs	size=100M,mode=777,noatime,nodiratime	0	0

~.cache je trikove - ukladaji se tam napriklad nahledy medialnich souboru (kdo pracuje s mc, tak nahledy nepotrebuje), dconf “dvoubajtovy binarni blob”… Takze muze byt uzitecne si .cache presunout do tmpfs/nullfs:

Pozor na dostatek RAM!
$ rm -rfv $HOME/.cache
$ ln -s /dev/shm $HOME/.cache
$ rm -rfv $HOME/.mozilla/firefox/<profil>/cache
$ ln -s /dev/shm $HOME/.mozilla/firefox/<profil>/cache

Nenazrane pulseaudio

Pulseaudio si v /dev/shm dela 64MiB binarni bloby (pulseaudio-shm-*) a NEMAZE je po sobe, cimz efektivne zere “cached” (protoze tmpfs) RAM.

Pokud se tyhle bloby zakazou, podle internetu muze vzrust latence (ale nepozoroval jsem)…

Nastesti se to da zakazat upravou /etc/pulse/daemon.conf (pozor na strednik na zacatku radku)

enable-shm = no

Nefunkcni suspend (uspani do RAM)

Devuan (MATE 1.8) se neumi uspat do RAM i s nainstalovanym acpi a pm-utils. Je potreba vyresit uspani a zaroven zamkuti obrazovky (pm-suspend jen uspi, ale nezamkne).

Pokud se pm-suspend zavola pred dokoncenim zamknuti (je-li screensaver nastaveny na fade-to-black), po probuzeni jsou v obraze artefakty a muze leaknout buffer desktopu pred zamcenim.

Distribucni script /etc/acpi/lid.sh vola (pokud existuje a je spustitelny) soubor /etc/acpi/local/lid.sh.pre (pravdepodobné neexistuje → vytvor):

grep -q closed /proc/acpi/button/lid/*/state
if [ $? = 0 ]; then
	xscreensaver-command -display :0.0 -lock && sleep 3; pm-suspend
fi

Nekdy je jeste potreba vytvorit event pro acpid /etc/acpi/events/lid

event=button/lid LID [^o]
action=/etc/acpi/lid.sh

Zakazani diskretni nvidie

Kdyz diskretni grafika jenom zere baterku a nani potreba, tak se da defaultne vypnout:

# apt-get install bbswitch-dkms
# echo "bbswitch load_state=0" >> /etc/modules
# update-initramfs -u -v

Pripadne rucne:

# echo "OFF" > /proc/acpi/bbswitch
# echo "ON" > /proc/acpi/bbswitch

Firefox searchplugin

Vyhledavac DDG umi vysledky poskytovat bez JS v cistem HTML, pripadne vyhledavat primo obrazky. Umi taky parametricky vypnout “filtrovani nevhodneho obsahu” (GET parametr “kp=-2”). Udelal jsem adekvatni searchpluginy do firefoxu:

HTML only, vypnute filtrovani:

<SearchPlugin xmlns="http://www.mozilla.org/2006/browser/search/" xmlns:os="http://a9.com/-/spec/opensearch/1.1/">
<os:ShortName>DuckDuckGoGG HTML</os:ShortName>
<os:Description>Search DuckDuckGoGG (HTML)</os:Description>
<os:InputEncoding>UTF-8</os:InputEncoding>
<os:Url type="text/html" method="GET" template="https://duckduckgo.com/html/">
  <os:Param name="q" value="{searchTerms}"/>
	<Param name="kp" value="-2"/>
</os:Url><os:Url type="application/x-suggestions+json" method="GET" template="https://duckduckgo.com/?q={searchTerms}&amp;kp=-2&amp;type=list">
</os:Url>
</SearchPlugin>

Hledani rovnou obrazku:

<SearchPlugin xmlns="http://www.mozilla.org/2006/browser/search/" xmlns:os="http://a9.com/-/spec/opensearch/1.1/">
<os:ShortName>DuckDuckGoGG Img</os:ShortName>
<os:Description>Search DuckDuckGoGG (Image)</os:Description>
<os:InputEncoding>UTF-8</os:InputEncoding>
<os:Url type="text/html" method="GET" template="https://duckduckgo.com/">
  <os:Param name="q" value="{searchTerms}"/>
	<Param name="kp" value="-2"/>
	<Param name="iar" value="images"/>
	<Param name="type" value="list"/>
</os:Url><os:Url type="application/x-suggestions+json" method="GET" template="https://duckduckgo.com/?iar=images&amp;q={searchTerms}&amp;kp=-2">
</os:Url>
</SearchPlugin>

Ulozit do .mozilla/firefox/PROFIL/searchplugins/NAZEV_VYHLEDAVACE.xml

Disable USB automount

echo 'ACTION==“add”,KERNEL==“sd*”,RUN==“/bin/true”' » /etc/udev/rules.d/noautomount.rules

Debian/Devuan cekaji pri bootu 90 s na sit

Nejaky idiot implementoval default, ze kdyz pri bootu neni link na eth, tak se musi pockat 90s a on se mozna zazracne objevi.

Reseni je snadne: na zacatek /etc/init.d/networking nacpat “exit 0”

Rychlejsi internety

https://www.root.cz/clanky/rizeni-toku-algoritmem-bbr-buldozer-nebere-ohledy-na-ostatni-spojeni/

# echo "tcp_bbr" >> /etc/modules
# echo "net.ipv4.tcp_congestion_control=bbr" >> /etc/sysctl.d/bbr.conf

.nanorc

set smooth
set softwrap
set tabsize 2
set constantshow
unset locking
bind ^L copytext all

URL v xattr

Nejaky debil vymyslel a defaultne zapnul ukladani URL stahovaneho souboru do xattr. Informace samotná je uložena jako vlastnost user.xdg.origin.url, případně user.xdg.referrer.url

By default se tak chova wget (při kompilaci vypnout parametrem –disable-xattr; za běhu –no-xattr) a chromajzl.

https://www.root.cz/clanky/atributy-souboru-mohou-obsahovat-url-ze-ktere-byl-soubor-stazen/

Leading zeros v bc

“bc” zahazuje 0 na zacatku desetinnych cisel, protoze americani maji vseobecne s cislama problem (a neexistuje ani zadny prepinac ktery by to zapnul)

echo "5*0.1" | bc
.5

Nastesti co nedokaze basic calculator, dokaze sed… Fix do .bashrc:

alias bc="bc | sed -e 's/^\./0./g' -e 's/^-\./-0./g'"

/tmp a tmpfs

Software, which was written with the Abacus in mind, expects that the typical processed data wont fit into available RAM. The /tmp directory is the offloading space for such purpose - save the interproduct there and return to it afterwards. But now we have so much RAM, that there are some rumors spreading about the possibility to run TWO electron applications at once!

So to move the archaic slow, storage limited /tmp into the RAM, put next line into /etc/fstab:

none /tmp     tmpfs size=60G,mode=777,noatime,nodiratime 0 0

TODO

Upgrade Ascii -> Beowulf

Strange behavior of touchpad and broken scrolling

X11 migrated from evdev to libinput. Lets go back to the working method…

apt-get purge xserver-xorg-input-libinput
apt-get install xserver-xorg-input-evdev

Release.pgp unsupported binary format

When apt-get update says ^^, it means that just some junk is left in /var/lib/apt/lists …

# rm -rfv /var/lib/apt/lists/*

ALSA

Well, audio output gets fucked up completely, since “alsa” command is not provided anymore by any package…

apt-get purge alsa* pulseaudio* # Na trisky nehled, me to odjebalo cely mate-desktop
shutdown -r now
apt-get install alsa-utils libasound2 libasound2-data volumeicon-alsa
shutdown -r now

So “aplay -l”, note proper device you want to use and disable the other ones in /etc/modprobe.d/alsafucked.conf

options snd-hda-intel index=HUGE_INTEGER_DEFINITELY_NOT_0,0

Restart again… a v “alsamixer” nastav co je potreba. Restart again and it works (or GOTO 1)

Boot do tty

Suddenly boots to tty and startx says:

modeset: permission denied?

apt-get install elogind libpam-elogind

IEEEtran.bst

Enhancement of popular LaTeX/bibtex style with DOI reference. Just apply the diff to the original IEEEtran.bst file…

Your .bib file than can use the doi variable for articles and books.

To make the DOI clickable, change the the .bst file to:

FUNCTION {format.doi}
{ doi empty$
    { "" }
    { this.to.prev.status
      this.status.std
	  "\doi{" doi * "}" *
    }
  if$
}

and add to your .tex file

\newcommand*{\doi}[1]{\href{http://dx.doi.org/#1}{DOI:\,#1}}

Pychess

The new version of pychess (1.0.0) is just crippled compared to the previous versions. Not only calls home on each and every start (lookup on github for new version), but the widget at the end of the game hides the back/forth controls unless the game window is insanely huge. So apply following patches:

checkversion.diff
*** ../Utils/checkversion.py	2018-10-29 09:54:18.000000000 +0100
--- /usr/lib/python3/dist-packages/pychess/Utils/checkversion.py	2020-06-12 17:09:50.107964455 +0200
***************
*** 13,18 ****
--- 13,19 ----
 
  @asyncio.coroutine
  def checkversion():
+     return
      new_version = None
 
      filename = yield from download_file_async(URL)
gamewidget.diff
*** ./gamewidget.py	2019-02-25 11:48:07.000000000 +0100
--- /usr/lib/python3/dist-packages/pychess/widgets/gamewidget.py	2020-06-12 17:21:13.511937822 +0200
***************
*** 655,667 ****
          prevButton.set_tooltip_text(_("Step back one move"))
          toolbar.insert(prevButton, -1)
 
!         mainButton = Gtk.ToolButton(stock_id=Gtk.STOCK_GOTO_FIRST)
!         mainButton.set_tooltip_text(_("Go back to the main line"))
!         toolbar.insert(mainButton, -1)
! 
!         upButton = Gtk.ToolButton(stock_id=Gtk.STOCK_GOTO_TOP)
!         upButton.set_tooltip_text(_("Go back to the parent line"))
!         toolbar.insert(upButton, -1)
 
          nextButton = Gtk.ToolButton(stock_id=Gtk.STOCK_MEDIA_FORWARD)
          nextButton.set_tooltip_text(_("Step forward one move"))
--- 655,667 ----
          prevButton.set_tooltip_text(_("Step back one move"))
          toolbar.insert(prevButton, -1)
 
! #        mainButton = Gtk.ToolButton(stock_id=Gtk.STOCK_GOTO_FIRST)
! #        mainButton.set_tooltip_text(_("Go back to the main line"))
! #        toolbar.insert(mainButton, -1)
! 
! #        upButton = Gtk.ToolButton(stock_id=Gtk.STOCK_GOTO_TOP)
! #        upButton.set_tooltip_text(_("Go back to the parent line"))
! #        toolbar.insert(upButton, -1)
 
          nextButton = Gtk.ToolButton(stock_id=Gtk.STOCK_MEDIA_FORWARD)
          nextButton.set_tooltip_text(_("Step forward one move"))
***************
*** 671,679 ****
          lastButton.set_tooltip_text(_("Jump to latest position"))
          toolbar.insert(lastButton, -1)
 
!         filterButton = Gtk.ToolButton(stock_id=Gtk.STOCK_FIND)
!         filterButton.set_tooltip_text(_("Find postion in current database"))
!         toolbar.insert(filterButton, -1)
 
          self.saveButton = Gtk.ToolButton(stock_id=Gtk.STOCK_SAVE)
          self.saveButton.set_tooltip_text(_("Save arrows/circles"))
--- 671,679 ----
          lastButton.set_tooltip_text(_("Jump to latest position"))
          toolbar.insert(lastButton, -1)
 
! #        filterButton = Gtk.ToolButton(stock_id=Gtk.STOCK_FIND)
! #        filterButton.set_tooltip_text(_("Find postion in current database"))
! #        toolbar.insert(filterButton, -1)
 
          self.saveButton = Gtk.ToolButton(stock_id=Gtk.STOCK_SAVE)
          self.saveButton.set_tooltip_text(_("Save arrows/circles"))
***************
*** 688,698 ****
 
          self.cids[firstButton] = firstButton.connect("clicked", on_clicked, self.board.view.showFirst)
          self.cids[prevButton] = prevButton.connect("clicked", on_clicked, self.board.view.showPrev)
!         self.cids[mainButton] = mainButton.connect("clicked", on_clicked, self.board.view.backToMainLine)
!         self.cids[upButton] = upButton.connect("clicked", on_clicked, self.board.view.backToParentLine)
          self.cids[nextButton] = nextButton.connect("clicked", on_clicked, self.board.view.showNext)
          self.cids[lastButton] = lastButton.connect("clicked", on_clicked, self.board.view.showLast)
!         self.cids[filterButton] = filterButton.connect("clicked", on_clicked, self.find_in_database)
          self.cids[self.saveButton] = self.saveButton.connect("clicked", on_clicked, self.save_shapes_to_pgn)
 
          self.on_shapes_changed(self.board)
--- 688,698 ----
 
          self.cids[firstButton] = firstButton.connect("clicked", on_clicked, self.board.view.showFirst)
          self.cids[prevButton] = prevButton.connect("clicked", on_clicked, self.board.view.showPrev)
! #        self.cids[mainButton] = mainButton.connect("clicked", on_clicked, self.board.view.backToMainLine)
! #        self.cids[upButton] = upButton.connect("clicked", on_clicked, self.board.view.backToParentLine)
          self.cids[nextButton] = nextButton.connect("clicked", on_clicked, self.board.view.showNext)
          self.cids[lastButton] = lastButton.connect("clicked", on_clicked, self.board.view.showLast)
! #        self.cids[filterButton] = filterButton.connect("clicked", on_clicked, self.find_in_database)
          self.cids[self.saveButton] = self.saveButton.connect("clicked", on_clicked, self.save_shapes_to_pgn)
 
          self.on_shapes_changed(self.board)

Disable hostname change by DHCP

Someone got a briliant idea of changing system's hostname via DHCP lease reply *by default*. Disable this idiotism by removing “host-name” from the requrest and/or by enforcing your hostname with the “supersede” option.

/etc/dhcp/dhclient.conf
request subnet-mask, broadcast-address, routers,
	domain-name, domain-name-servers, domain-search, interface-mtu,
	rfc3442-classless-static-routes;
 
supersede host-name "clusterfuck";

redshift

Recent versions of package redshift comes with crazy dependencies, so lets build it from source without ballast…

apt-get source redshift
cd ./redshift*
./configure --prefix=/usr --disable-quartz --disable-wingdi --disable-geoclue2 --disable-corelocation --disable-gui --disable-ubuntu --disable-apparmor --without-systemduserunitdir --enable-randr
make
sudo make install

You may need to install x11proto-randr-dev. Config file is straightforward

.config/redshift.conf
[redshift]
temp-day=5500
temp-night=3000
location-provider=manual
 
[manual]
lat=50
lon=15
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki