Brmlab

brmlab@brmlab.cz

4066 discussions

Start a nNew thread

Tydenni prehled udalosti / Weekly overview of events
by noreply＠brmlab.cz 10 Jul '22

10 Jul '22

Udalosti v brmlabu tento tyden: Events taking place in brmlab this week: 2022-07-14 17:00 IURE workshop

1 0

Project to make for BRMLab - Drawbot with automatic pen change
by Vasiliy Chernov 09 Jul '22

09 Jul '22

Hi everyone, Recently, I found the following video: https://youtu.be/virDtVVt2Xo The guy made a drawing plotter with automatic pen change as simple as possible. I was thinking it would be great to make something like this for our lab and put it to the Soc.Room for everybody who wants to play with it. If anybody interested to make that project, please, let me know :) Regards, Vasilii

1 0

Re: [Brmlab] [Rada] Hardware Lab Upgrade and Refinery
by niekt0 05 Jul '22

05 Jul '22

Hi, thanks for the work. I totally agree, that the current state is chaotic an quite ineffective. I will be at the meetup today, and we can go through the things and check them physically. I thing, the main problems are: 1. Storage, nothing should be left on the ground. => build/enlarge new shelves? reorganize things? 2. Too many things, many of them not working => You already started working on that ( I also stare significantly on number of crap^H^H^H^Hvintage computer lying everywhere:) 3. Some... discipline when working with tools. For example if something breaks, send e-mail, etc... I am forwarding this to main brmlab mailinglist, so all people who are interestid can join the discussion. n. On Tue, Jul 05, 2022 at 12:38:44PM +0200, Vasiliy Chernov via Rada wrote: > Hi Everyone, > > As we all know, Hardware lab is rather a "Bordel" Lab as we usually refer > to it :) > > There have been a lot of discussions recently but we did not progress much > in actual change of it. > > 1. Electric tools for Hardware Lab > Yesterday I checked all the electric tools that we have and discovered that > a good half of them didn't work. > For example we had around 4 ACUs there and none was working properly. I put > them to "to be thrown away" status. I am not really sure what the issue is > with them. Hence, if somebody wants to have a look and fix them it would be > great. Otherwise, my proposal is to buy a new one. We have a Parkside ACU > that is overheating a lot. I believe it would be great just to buy the same > without the batteries. In such case it will be cheap. > > Also, as we discussed before, it will be great to buy a good hobbyist > vacuum cleaner. I found one that looks like a good option (fair price and > big volume). > > Another crucial electric tool that we are about to lose is a drilling > machine. When you turn it on, its quite scary to see how the sparkles are > going all over the place inside of it. So, I am not sure if it is safe to > use it. > > Hence, we have 3 things from electric tools that we need to buy: > - New ACU - Parkside from LIDL > https://www.lidl.cz/p/parkside-performance-aku-priklepova-vrtacka-psbsap-20… > >From what I see, this one can actually replace both drilling machine and > acu in one for 1990 CZK. > > - New Drilling machine: > https://vrtacky.heureka.cz/einhell-bt-id-650-e/#prehled/ > Here is a super cheap one for just around 600 czk. > > - Vacuum cleaner: > https://vysavace.heureka.cz/fieldmann-fdu-2004-e/#specifikace/ > Here, I found that is relatively strong (1400W) and fit enough garbage in > one load (32L). Also, it doesnt need bags and can be used for both dry and > wet cleaning. > Price is 2160czk > > 2. Furniture for Hardware lab > > We received some of the tools from FUTLab and at the moment its just lying > on the floor. > It would be great to make either one big table (kinda longer than the one > we have now) or put an extra one from a side. > In my opinion it will be easier to make one. > Also, it will be good to come up with some idea about the boxes for 3D > printers. Rainbof @Ondrej Beranek <rainbof(a)gmail.com> offered a good idea > of stacking few IKEA tables together to make it. > > Hence, here are the things that needs to be agreed on: > > - New table for Hardware lab. The one which will hide/remove all the mess > that we have. > - Tables from IKEA for 3D printers > > So, what do you guys think? > Is there a voting needed for all of that? > > Lets make the Hardware Lab great again! :D > _______________________________________________ > Rada mailing list > Rada(a)brmlab.cz > https://brmlab.cz/cgi-bin/mailman/listinfo/rada

1 0

Člověk z Plzně s lineárními pohony na party
by Jan Hrach 29 Jun '22

29 Jun '22

Ahoj, nemáte někdo kontakt na člověka, co byl na narozeninové párty: - přijel z Plzně - řeší lineární pohony a automatizaci, motory - hovořil o výrobě kompozitních konstrukcí ve vesmíru Díky :) -- Jan Hrach | https://jenda.hrach.eu/

1 0

Tydenni prehled udalosti / Weekly overview of events
by noreply＠brmlab.cz 26 Jun '22

26 Jun '22

Udalosti v brmlabu tento tyden: Events taking place in brmlab this week: 2022-07-01 19:00 2k6 - http://meetings.2600.cz/

1 0

Brmlab party
by Ondrej Beranek 23 Jun '22

23 Jun '22

Ahoj brmstvo, Tak jako kazdej rok i letos oslavime narozky tentokrat 12. Termin je to sobota 25.6. Tak jako vzdy mame naplanovano, pulka se nestihne a druha improvizuje, takze uspech akce skoro zarucen :). Bude to tradicne u nas v Brmlabu rojit se a skladat zacneme po obede a akce zacne tak v 21h jako vzdycky. pres den se pokusime realizovat * povidani o brmglu (ainu a yokotashi) * kdo bude chtit bude se moct podilet na pajeni badges pro registrovane * prijdou kluci z octopuslabu a urcite neco ukazou * mozna bude vice nez 1 gril :) vecir: * arnostek se svoji diskotekou (malanius, jenne a kluci z ROHu) * svetylka (jenne a vasilij) * randal (kolektivni prace) * rizek&chlast (roh, rainbof, gril, pre, .. :) ) * pokec * Kdo mi napise predem, bude mit na badge vlastni napis (baterku CR-2032 si prosim prineste pro zapometlivy nejaky naskladnim do brmbaru). Pres samy "fejcbuky" a "instace" jsme zapomeli napsat sem na Mailing list takze to ted napravuju :) Kdo jeste nezaregistroval, tak brmlab uz neni na Bubenske, ale pod kaplickou 20, kousek od zastavky Trebesin.

1 0

[rada@brmlab.cz: [Rada] Maker Faire Prague – přihlaste se 🚀]
by niekt0 20 Jun '22

20 Jun '22

1 0

Tydenni prehled udalosti / Weekly overview of events
by noreply＠brmlab.cz 19 Jun '22

19 Jun '22

Udalosti v brmlabu tento tyden: Events taking place in brmlab this week: 2022-06-19 13:00 Festival otevřených dílen - https://www.facebook.com/events/1276227276106453/?post_id=1300816890314158&… 2022-06-25 18:00 (brmlab)^12 birthday party - https://brmlab.cz/event/brmlabc

1 0

Demonstrace proti chatcontrolu 2.7. / Chatcontrol demonstration on July 2
by Tomáš Valenta 17 Jun '22

17 Jun '22

2.7. před výstupem ze stanice Anděl budeme pořádat demonstraci proti novému návrhu Chatcontrolu. Začínáme v 15:00, pokračujeme až do 19:00. Všichni jste zváni. :) Více informací na [stránkách](https://imaniti.org/protest2.html). --- On July 2, we're organizing a demonstration against the new Chatcontrol proposal in front of the Anděl station entrance. We're starting at 3 PM, continuing all the way until 7 PM. Everyone is invited. :) More information is available on the [website](https://imaniti.org/protest2.html), though only in Czech. But the map and GPS coordinates are pretty international!

1 0

Tydenni prehled udalosti / Weekly overview of events
by noreply＠brmlab.cz 12 Jun '22

12 Jun '22

Udalosti v brmlabu tento tyden: Events taking place in brmlab this week: 2022-06-16 19:00 - https://brmlab.cz/event/MCM 2022-06-19 13:00 Festival otevřených dílen - https://www.facebook.com/events/1276227276106453/?post_id=1300816890314158&… 2022-06-14 14:30 Chatcontrol demo - https://imaniti.org/protest.html

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Brmlab