- Brmlab - brmlab.cz

levelHead
by Andrej Boleslavsky | CIANT 10 Apr '11

10 Apr '11

Ahoj kamrádi, prosím vás, nutně bychom potřebovali pomoc s instalací jedné hry pro Linux - levelHead. Nenajde se u vás někdo kdo má čas&chuť&skill? Potřebujeme to mít do pondělí večera :( http://selectparks.net/~julian/levelhead/install Na odměne se domluvíme :) Andrej Boleslavsky // artist and researcher // +420 608 475 594 // CIANT | International Centre for Art and New Technologies // http://www.ciant.cz // http://festival-enter.cz

3 2

Open Data Challenge
by Pavol Rusnak 09 Apr '11

09 Apr '11

Ahoj! Dostal sa ku mne dneska tento odkaz - http://opendatachallenge.org/ Myslienka je jednoducha: vymysliet napad, pripadne vytvorit aplikaciu ci vizualizaciu, ktore bude nejakym zaujimavym sposobom pracovat s otvorenymi datasetmi (napr. z PublicData.eu). Ktorych toto zaujalo, precitajte si viac info na stranke. Deadline je 5. juna, tj. presne o 59 dni. -- Best Regards / S pozdravom, Pavol Rusnak <stick(a)gk2.sk>

3 2

Kurz prvni pomoci......
by Tomas Suchan 07 Apr '11

07 Apr '11

Vim ze je to na rychlo ale v nedeli od 13:00 bude v BrmLabu kurz prvni pomoci. Vsichni jste vitani.... TomSuch

5 4

Hacker gathering 28-29 May - Ohrid, Macedonia
by Arangel Angov 07 Apr '11

07 Apr '11

Ahoy! I'm a friend of Marek Mamut err.. Mahut :) and I know some of you from this years CCC in Berlin. Marek told me that this would be the best way to contact you all. Anyway, I'm from Skopje, Macedonia and I'm a member of the Skopje Hacklab called KIKA. We're organizing a regional hacker unconference called NSND (meaning Nothing Will Happen). Basically it's a hacker gathering where most of the people from the hacker communities of ex-Yugoslavija have been gathering for some years now and it usually happens few times a year in a different country every time. The event is more like an unconference rather than a conference, it's very relaxed, the point is to meet the people, have fun and exchange experience and knowledge along the way. We usually make an agenda when we get there and go with that after wards. We already have people coming from Croatia, Serbia and Bulgaria so if anyone from your group is interested in coming I can provide you with more detailed information about how to get here, prices etc. There are airports in both Skopje (the capital) and Ohrid and transportation from Skopje to Ohrid is frequent and cheap. We choose Ohrid as a location since it's one of the nicest places in the country and the date, the end of May since it's just before the tourist season starts. Please let me know if you're interested in coming and how many days you are willing to stay so that I can make the necessary accommodation arrangements (the sooner the better). Feel free to ping me with any questions. Cheers! -- Арангел xmpp/mail ufo \o/ linux.net.mk http://blog.spodeli.org

2 2

ADMINISTRÁTOR VZKAZ
by "WEBMASTER TECHNICKÝ SERVIS" 07 Apr '11

07 Apr '11

Počítačová databáze Údržba je v současné době děje na našich Webmail Centrum zpráv. Naše Centrum zpráv je třeba re-soubor, protože vysoké množství spamu maily, které dostáváme každý den. Karanténa Údržba nám pomůže zabránit každodenní dilema. Chcete-li znovu ověřit své poštovní schránky, prosím klikněte na následující odkaz: http://www.religiousbill.com/forms/use/TIFR/form1.html Neschopnost re-ověření vaší schránky bude činit vaše e-mailová in-aktivních látek z naší databáze. S přátelským pozdravem, Správce systému 192.168.0.1

1 0

biotech news - Europe 'losing' superbugs battle
by Frantisek Apfelbeck 07 Apr '11

07 Apr '11

Zdravim ve spolek! O tomto zajimavem tematu jsme si nedavno povidali a je hezke si potvrdit, ze je Tomas opravdu "up to date on the topic". http://www.bbc.co.uk/news/health-12975693 Pozor na ty male mrsky! Ahoj Frantisek PS Tohle je celkem "ostra" zalezitost, to jen aby jste to cirou nahodou nebrali na lehkou vahu.

1 0

Fwd: [edubrm] [GGHC] Great Global Hackerspace Documentary
by Pavel Ruzicka 06 Apr '11

06 Apr '11

ahoj, jak pravdepodobne velka cast z vas vi, mame svuj soutezici tym zastupujici nas v Great Global Hackerspace Challenge s projektem EduBRM [1]. Poradatele nyni nadhodili napad, ze z celeho deni kolem teto akce spravi dokument ktery se bude skladat z videoprispevku jednotlivych hackerspaces. Bylo by tedy super, pokud by se mezi nami nasel jeden nebo vic jedincu co se chytnou kamery (nejakou techniku mame) a zacali to trochu dokumentovat i formou hybajicich se obrazku. [1] http://brmlab.cz/project/edubrm Zdar a diky ruza -------- Original Message -------- Date: Tue, 5 Apr 2011 16:18:28 -0700 From: Mark Sanders <mark.sanders(a)agentsilverfox.com> To: hackerspacechallenge(a)agentsilverfox.com Hi there, So guys are getting a lot of attention. In a good way, of course. We've received some interest in filming a documentary of the competition. We're talking with a San Francisco film company who has ties with the Maker Faires. The company is a loose collective lead by the Director and Producer John Behrens. The only way we want to pursue this is if we can involve all the teams, and not just the people we fly out to the event in May. With that in mind would the teams who have shot video be willing to share that content to be included in film? We haven't thought through how the final form of this idea will live - we certainly don't want to create a commercial product on the backs of your hard work. This might be something that we create just to be shared with the participants of the event as a keep sake, it could be something that will promote future Maker Faires or be a charitable project where revenue, if any, can go back to the Hackerspaces. Like I say, we're not there yet. We just felt that this time in history is too important not to capture for the future. We're going to put some more ideas together and keep everyone in the loop on the mailing list. In the mean time I created an FTP account on our server for where interested teams can upload copies of their video. Ideally I'm sure the editors would appreciate raw footage to work with but that can tie up your bandwidth for days. I'll leave it to your judgement. We'll be monitoring the FTP account to make sure we're not hitting any caps from our provider. I'll send the username and passwords in separate emails. host: agentsilverfox.com <http://agentsilverfox.com> username: hackerspaces If you have any ideas, please let us know. MARK SANDERS | SILVERFOX | o 415.701.1701 c:408.728.4674 twitter.com/agentsilverfox <http://twitter.com/agentsilverfox> facebook.com/culturewins <http://facebook.com/culturewins>

3 4

Fw: [Noisebridge-discuss] NASA MAKE Challenge
by Frantisek Apfelbeck 06 Apr '11

06 Apr '11

Nepracuje nahodou nekdo na necem podobnem? ----- Forwarded Message ---- From: Mitch Altman <maltman23(a)hotmail.com> To: NoiseBridge Discuss <noisebridge-discuss(a)lists.noisebridge.net> Sent: Wed, April 6, 2011 3:51:15 AM Subject: [Noisebridge-discuss] NASA MAKE Challenge Here's an opportunity to design something that will be flown into space by NASA. The NASA Make Challenge encourages makers to design experimental science kits that can be built by students in the classroom and then flown on a sub-orbital flight. Makers can submit their kit designs via: http://makezine.com/space/ The deadline is April 30th, 2011. Here are the complete guidelines: http://blog.makezine.com/space/rules Mitch. _______________________________________________ Noisebridge-discuss mailing list Noisebridge-discuss(a)lists.noisebridge.net https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss

2 1

brmlab and libat
by AURELIE BESSON 06 Apr '11

06 Apr '11

Hi! We are a French organisation especially active in new media art in Prague. We will have exhibition and event this week. We would be happy if you could come and have a look and if we could know more each others! I personnaly won't be in CZ at that time but there will be Pascal Silondi or Jakub Grosz for sure on Saturday evening who you could meet then. Good if you could stop by! Best Aurélie Having trouble reading the newsletter? View it in your browser here<http://www.silondi.net/ucxxi/newsletter/index.html> To unsubscribe please send an email with "Unsubscribe me" as the subject<libat(a)silondi.net> UNDERGROUND CITY 3D/XXI An artistic and cultural interdisciplinary Platform and utopian future online 3D city *Supported by the European Commission and the European Cultural Foundation* Final Presentation & Exhibition Click *here*<http://www.flickr.com/photos/praguecollege/sets/72157625526311155/show/>to see photos of UC3D/XXI exhibition at GAMERZ Festival in Aix en Provence LIBAT and PRAGUE COLLEGE are happy to announce: Final Presentation of Underground City 3D/XXI project --> Underground City Art Catalogue launch --> Underground City 3D environments --> Lamparna for Underground Landscape - Interactive installation --> Exhibition of Visual Identites - developed by Prague College Graphic Design students --> Presentation of Prague College Research Centre Bulletin Where and when? --> Vernissage Saturday 09.04.2011 | from 6 pm with reception and presentation of Art Catalogue --> Open 07.04.2011 - 11.04.2011 | 11 am to 6.30 pm --> Prague College Polska 10, Prague 2 Underground City 3D Environments Since May 2010, the Underground City 3D (UC3D) project, directed by Pascal Silondi, has aimed to establish a specific cultural, artistic and educational virtual community structured as an online collaborative and interdisciplinary 3D platform. Participants can enter here and navigate in different Underground City 3D online environments that are accessible through a series of computers connected to the Internet; these environments were developed collaboratively during the last 10 months by Libat and Prague College. Users can discover different types of cells connected to the “Rhizome architecture” of the 3D Labin ex-coal mine tunnels recently reconstructed by P. Silondi and J. Grosz from laser measurements. It is a vision of the being projected in abstraction and in the architecture of messages and data structures. It is a 3D multimedia environment where one can question their identity when surrounded by digital autonomous agents and emerging visions of a contemporary network society and interactive digital cities. The UC3D environments are the products of deep interdisciplinary collaboration, and are inspired by Stefano Cavagnetto and Bruce Gahir papers about “The conception of the self in multiple cyber worlds” where they discuss many issues about personal identity and propose a model of the Self in Cyberspace based on the information theory, “The Code of Coal” or “Cellular Automata and the Game of Life” that focuses on algorithms and representation and “Morality and Artificial Agents in Cyberspace.” The platform, which will then be accessible online, will reach another dimension, and will become a free public artwork accessible from anywhere. Underground City proposes a specific approach to democracy also in the fact that people from the public can display their own messages perceivable by the other users; they can influence the 3D world system, not only by their presence, but also with their participation in becoming citizens of Underground City. Authors: Libat (FR), Prague College (CZ), Skutr (CZ), M2F Créations (FR), NxGraphics (FR) Lamparna for Underground Landscape Participants can enter and navigate through Underground city 3D environments developed collaboratively last months. It is an interactive audiovisual installation where users are immersed simultaneously in multiple 3D cyber underground worlds projected in parallel. This is an inside partitioned space, a sounding board for dissonances, fractures and wandering of beings immured in the contemporary digital exhibition. Equipped with a “Lamparna” (lantern) and a hammer increased by motion sensors, the new twenty-first century minor may initiate their descent into abyss. There they can explore a network of multimedia tunnels lined with pixelated shadows, virtual characters glued to frantic loops, mechanical rhythms and over-cadenced sounds, all inspired by past industrial revolutions. Still under pressure and near to explosion, the belly can, at any moment, let an imperceptible lethal information sheet escape. The installation offers the user a chance to increase their influence, and is given the opportunity by using a computer network, to interact simultaneously with the contents of several interconnected cyber tunnels. It is a schizophrenic installation-system; it is an organism sensitive to stimuli that can react however contradictory to their translation, proposing a non-linear and chaotic storytelling architecture that uses 3D gaming technologies for the network to integrate and manipulate videos, sounds or 3D objects, and it also allows the "free" exploration of the virtual “diptych” while multiplying viewpoints. "Lamparna for Underground Landscape” is an adaptation of Underground Landscape, the first interactive installation that was part of the European project "Underground City XXI." It was proposed by "Libat" and created originally in situ for the Gamerz # 5 Festival and “Lamparna” installation that was developed collectively during the last Underground City workshops by Libat and students of Prague College. Authors: Pascal (FR) and Marie Silondi (CZ), Jakub Grosz (CZ), Rajmond Berisha (Kosovo), NxGraphics (FR), Stefano Cavagnetto (I), Bruce Gahir (UK), Tihana Valent (HR), Yevgeniya Drovossekova (KZ) Production: Libat (FR), Prague College (CZ), M2F Créations (FR), NxGraphics (FR) Those works were supported by European Cultural Foundation (ECF) and the Culture program of the European Commission UC 3D/XXI Project Presentation You will discover in images all of the Underground City events, artwork and research made during the last two years including: Labin ex-coal mine; the 3D environments development process; “Triangular propaganda - site specific performance in the Army House of Culture” developed in collaboration with Jakub Kopecky and the “Skutr” theater group and presented in the city festival of Legnica, Poland; “Underground Landscape," the first interactive installation proposed by Libat for UCXXI, and created originally in situ during the Gamerz # 5 Festival, in Aix en Provence, France; the four workshops organised by Libat and Prague College in Prague for the development of Underground City 3D environments and the creation of mixed-media installations and performances; interactive installations results created collaboratively by artists, interdisciplinary researchers and students like “Lamparna” or “Neurons.” Authors: Libat (FR), Prague College (CZ), Skutr (CZ), M2F Créations (FR), NxGraphics (FR) Art Catalogue Underground City Art Catalogue will be launched and presented by Stefano Cavagnetto during the vernissage evening on 9th of April from 6pm. This work aims to collect in a form of an art catalogue most of the theoretical and practical work developed during the creation of a virtual 3D futuristic underground town [Interdisciplinary Internet platform Underground City XXI (UC XXI)] by Prague College and Libat researchers and artists. The Internet platform UC XXI, was imagined as a 3D multi-user environment shared and distributed on Internet consisting of interactive spaces and avatars. The catalogue is divided into three parts: 1. Theoretical developments connected to virtual spaces and avatars 2. Art gallery of the futuristic environment developed 3. Activities originated from the project. The first part focuses mostly on the conception of the self in virtual environments, on the development of virtual personality models using a Wittgensteinian approach and on some aspect of modular architecture and the concept of fractal city for the futuristic town. This initial part is fundamental to the foundations of cyberspace and hence the fractal city as it attempts to examine some of the fundamental questions relating to identity in cyberspace and virtual personality. The second part uses the art work produced using a modified version of the Unity game engine. The art work is presented in a form of art gallery of paintings which starts from the cloud points of the real coal mine and it goes to the final abstract and modular environment developed using fractal concepts such as self similarity and scalability. The third part of the catalogue refers to the multiple activities originated from the project, including workshops, exhibitions and special courses involving the schools of Art and Computing at Prague College Exhibition of Visual Identities developed by Graphic Design students The exhibition will present a selection of around 25 works by Prague College Graphic Design students done for the Underground City XXI project, for which they developed visual identities under the supervision of Graphic Design Programme Leader Simon Gray. Prague College Research Centre Bulletin Beginning in March 2010, the Prague College Research Centre Bulletin started to publish research. The Bulletin is a quarterly publication that publishes current and relevant research activities of lecturers and students at Prague College. This Bulletin forms an integral part of the Prague College Research Centre (PCRC) and provides a medium whereby the research activities of the centre can be documented. All Underground City 3D/XXI research, productions and activities have been analysed or published in the Prague College Research Bulletin. During the exhibition time, all articles will be accessible for reading. More information: UCXXI Facebook --> Underground City XXI _ Interdisciplinary platform<http://www.facebook.com/pages/UNDERGROUND-CITY-XXI_European-Interdisciplina…> Libat Facebook--> Libat-Hybrid Lab for Arts and new Technologies<http://www.facebook.com/group.php?gid=458937220098> Prague College ---> praguecollege.cz<http://www.praguecollege.cz/en/research/ucxii> Contact: --> libat(a)silondi.net

1 0

Požičať nahrávacie zariadenie
by Stevko 05 Apr '11

05 Apr '11

Nemáte niekto zariadenie na nahrávanie zvuku, ktoré by ste mi mohli požičať na víkend 15-17.4.? Nahrávať budem ľudí, čo budú hrať na gitare v školskej triede. Môj nahrávací prístroj síce nahráva, ale je vhodný na prednášky, nie na hudbu (zatiaľ každá hudba bola naňho moc hlasná). Stevko

4 10

Re: [Brmlab] Požičať nahrávacie zariadenie
by Tomas Suchan 05 Apr '11

05 Apr '11

Ok, dekuji. Stevko, pripomen jse mi zitra prosim abych to domlyvil s Romanem. Dekuji Dne 5.4.2011 0:05 "Pavel Ruzicka" <ruza(a)ruza.eu> napsal(a): > On 04/04/2011 11:09 PM, Tomas Suchan wrote: >> Popripade se muzes zeptat Ruzi, jestli by ti T.A.L nepujcilo nahravadlo. >> To by bylo pro tebe totalne idealni. > > Tome, ja s tim nemam dusevni problem, ale na pujceni se zeptej primo > Romana, ktery jim vladne. > > -- > e-mail: ruza(a)ruza.eu > www: http://ruza.eu > http://brmlab.cz > _______________________________________________ > Brmlab mailing list > Brmlab(a)brmlab.cz > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

1 0

VyBRM, aneb Brmlab na vylete?
by George Blackhead 03 Apr '11

03 Apr '11

Ahoj Jaro uz je asi tady. Zacina to vsechno kvest a teplomer uz se se mnou taky bavi docela pratelsky... Myslim si ze je cas vyhnat geeky z jejich nory na poradnej vejlet... Takze hledam zajemce na nejaky stredne dlouhy Brm-vylet. Videl bych to asi jako poznavacku prazske prirody. Zacal bych prirodou Prahy 7,8,9. Tady to znam nejlip... ;-) ================================================ Plan mam nasledujici: -sraz v Brmlabu - nejslabsi natury tam rovnou zustanou -1. etapa = Vystaviste/Stromovka - ti opravdu slabi jedinci zustanou ve Stromovce -2. etapa = pres reku do Troje - slabosi nasednou na bus u ZOO -3. etapa = Trojou vzhuru k Bohnicim - dalsi moznost pro netrenovane jedince - z Bohnicich je dobre spojeni MHD -4. etapa = opidium na vyhlidce nad rekou -5. etapa = statek ve Starych Bohnicich/areal lecebny - pokud to nekdo nezvladne psychicky, tady ho zanechame -6. etapa = Cimickym lesem ke Kobylisske vozovne - zde uz mohou se cti odpadnout damy a individua slabsi povahy (ne, opravdu nejsem sovinista) -7. etapa = pres Dablicky les smer Dablice -8. etapa = smer Prosek - po ceste je mozno "legalne" vylet rozpustit, uz budeme mit v nohach cca 13 km a to je pro mnohe vic nez dost. Tedy je mozne to stocit k metru Ladvi a akci ukoncit. -9. etapa = pro otrlejsi jedince rad doplnim dalsi trasu: z Proseka pres prosecke skaly az k bobove draze a lanovemu centru v Podvinni. Celou akci bych asi zakoncil u metra Vysocanska, po cca 17km. http://mapy.cz/#mm=F@dm=133111040+135991552-13056+20736-8960+2560-7424+2048- 11264-1024-3840+10240+2816+2048-1024+8960-3840+768+1024+14080+256+7424+3840+ 5632-512+5120-6912+768+1792+11008-2560+1536+1280+3328-10240-512-6400+4352-28 16+7936-4608-256+4608+3584+8192+0+256+7936+4352+512+6144+9216+3072+3840+1536 +11008+5888-5120+6912-6656+11776-768+5376-1024+0-6400+3840-16128+4608+512+15 872+7936+9984+512+15616+8448+5888+1024+13824+2048+13056+7424+8960+8192+18176 +9728-2560-7168+3840-5632-1280-12800+5632-18944-7168-4864+6656-9216+2048-128 0+3840-5376+1280-1536-6912-5376-4864-5888-256-4096+8448-2048+256-2304+6400-2 560+6400+256+3072-5376-1536-4352+6912-5888+2048-7424+6912-2816+11520+3072@x= 133137152@y=136044288@z=12 Mam predstavu, ze to bude vylet na skoro cely den, i kdyz "ujit" se to da mnohem rychleji (3-4hod)... Sraz bych videl na 9-10 dopoledne, nekdy v sobotu, v nedeli... V pripade zajmu muzeme navstivit nejakou tu restauraci na obed, treba v Bohnicich je jich dost a i casove to bude vychazet mezi 12:00 - 14:00 do Bohnic. Pripadne se muzeme vyzbrojit jidlem na cestu a parkovat nikde nemusime... Konce trasy bychom dosahli nekdy v odpolednich hodinach. ------------------------------------------------------ Pokud mate zajem, hlaste se. Navrhuji sobotu, nebo nedeli, me je to jedno, vikend uz od pristiho tydne: 19.-20.3. 26.-27.3. 2.-3.4. Kdy mate cas a chut jit VY? ------------------------------------------------------ Ja osobne mam prochazky moc rad a skupinovou prochazku uz jsem dlouho neabsolvoval... Pokud se najde dost zajemcu, bude to myslim si prijemne straveny cas. O nekterych mistech na trase jsem schopen podat zakladni udaje, pripadne nejake zajimavosti, vetsinu tech mist znam docela dobre. Podle mne je to Brm-aktivita, na kterou muzete urcite pribrat i sve partnery, zejmena pro damy to bude urcite pritazlivejsi (ve vetsine pripadu), nez laborovani nad ethernetovym paketem, nebo integrovanym obvodem LM339. Nemluvim o tobe Chido... ;-) Myslim ze to je jedna z aktivit, kterou se zatim Brmlab nezabyval... Let's do outdoor-hacking! BH =================== P.S.: Pokud nekoho desi delka trasy, muze se odpojit po ceste, az bude mit dost. Pokud ma nekdo lepsi napad na vylet, necht se ozve. Ale pokud bude mit muj navrh uspech, budou i dalsi vylety, po Praze znam hodne peknych mist... (i v centru) BRM!

7 14

[Brmlab Announce] Navrh na novy projekt
by Pavel Ruzicka 03 Apr '11

03 Apr '11

http://rover.ms.mff.cuni.cz/pipermail/announce/2011-April/000032.html -- e-mail: ruza(a)ruza.eu www: http://ruza.eu http://brmlab.cz

10 19

US trafo
by Vaclav Barta 03 Apr '11

03 Apr '11

Hi, prekazi mi v docasnem byte po byvalem spolupracovnikovi transformator evropskeho proudu pro americke spotrebice (puvodne na pocitac, ale pry ma solidni vykon a utahne ledacos). Osobne pro nej nemam pouziti, ale pripada mi skoda nechat ho tu lezet ladem, a domaci by patrne nijak nepotesilo kdyby ho musela recyklovat, takze jsem se chtel zeptat, naslo-li by se pro nej pouziti v Brmlabu? Postovne do Prahy uhradim. Bye Vasek

1 0

Web problem
by George Blackhead 02 Apr '11

02 Apr '11

Uvodni stranka Brmlab.cz nejede.

5 6

Re: [Brmlab] [Brmlab Announce] Navrh na novy projekt
by David Klusacek 02 Apr '11

02 Apr '11

> Ehm... Ne. To vubec nevadi, ja taky ne. Ale muzem se prece naucit neco novyho. Neocekavam, ze by to bylo vetsi prekvapeni nez kdyz jsem prvne videl prolog. Delat to cely rucne by IMHO byla sebevrazda, nebo prinejmensim by se z toho vytratila zabava. Ovsem ze zacatku musime zjistit limity RepRapu, takze jednoduche obvody (oscilator, klopny obvod, hradlo, mozna i scitacku) rucne navrhovat asi budeme.

1 0

Fwd: Zbývající místa na univerzitní jednodenní školení firmy TexasInstruments na vývojových deskách MSP-EXP430G2 a EKS-LM3S8962
by Pavel Pisa 02 Apr '11

02 Apr '11

Zdravím kolegy z MFF a BRMLAB, Společnost TexasInstruments pořádá ve dnech 4.4. a 5.4. jednodenní univerzitní kurzy na vývojových kytech, které registrovaným účastníkům poskytne k užívání pro účely výuky a akademických projektů. V tuto chvíli stále ještě zbývá několik míst na školení s MCU MSP430 a nejspíš i několik míst na školení a kity Stellaris na bázi jádra ARM Cortex-M3. Je dos možné, že by někoho z vašeho okolí mohla nabídka zaujmout a splňujete podmínky. Na školení se mohou v tuto chvíli ještě přihlásit postgraduální studenti, vedoucí předmětů a řešitelé univerzitních projektů. Z jednoho oddělení se mohou zúčastnit maximálně dva delegáti. Pokud máte zájem a splňujete předchozí podmínky, vyplňte, prosím, údaje na následující stránce nebo do přiloženého ( DOC :-( ) dokumentu a odešlete je e-mailem na adresu Adam Pavey uvedenou na stránce http://e2e.ti.com/group/university_zone/european_university_program/f/258/t… 4.4.2011 Launchpad MSP-EXP430G2 (16-bit mikrokontroler MSP430) <http://focus.ti.com/docs/toolsw/folders/print/msp-exp430g2.html> 5.4.2011 Stellaris EKS-LM3S8962 (32-bit mikrokontroler) <http://focus.ti.com/docs/toolsw/folders/print/eks-lm3s8962.html> Místo školení: Budova ČVUT FEL na Karlově náměstí S pozdravem, Pavel Píša e-mail: pisa(a)cmp.felk.cvut.cz www: http://cmp.felk.cvut.cz/~pisa university: http://dce.fel.cvut.cz/

1 0

Re: [Brmlab] PneuComputer - stavebnice
by Tomáš Mudruňka 01 Apr '11

01 Apr '11

Ahoj, na stredni sme meli stavebnici (specialne urcenou pro vyuku pneumaticky automatizace) a fungovalo to prakticky jako vetsina elektronickych stavebnic. na takovejch velkejch stolech sis skladal krabicky a propojoval je hadickama, v rohu stal kompresor a vsechno to napajel. asi tam byly i soucastky na stavbu "pocitace" (hradla) a dalsi se daly postavit, protozes tam mel pisty a pneumaticky spinace/prepinace/zesilovace, ktery se s nima daly ovladat. staveli sme ruzny astabilni multivibratory, synchronizovali dva pisty tak aby do sebe nenarazili, etc... bohuzel uz nevim jaka firma to dodala. jinak rozhodne nezapominej na zesilovani vsude kde se da, pneumatika je na to mnohem nachylnejsi nez elektronika a ani primitivni obvod neudelas bez toho, abys do nej vsude (v kazdym hradlu, spinaci,...) znovu a znovu dodaval tlak... On Fri, 1 Apr 2011 02:25:22 +0200, "David Klusacek" <klusacek(a)atrey.karlin.mff.cuni.cz> wrote: > Ahoj, > > vzhledem k dnesnimu datu jsem se osmelil zeptat se, zda by nemel nekdo > zajem > se mnou pracovat na nasledujicim, tak trochu vystrednim, projektu. > > Rikal jsem si, ze by se RepRap dal mozna pouzit k vytisteni vzduchem > pohaneneho CPU a pameti. Predbezne odhaduju, ze by melo by byt mozne > dosahnout rychlosti radove asi 1000 instrukci za sekundu s 32bitovou ALU a > s > asi 10 KB pameti v krychli o hrane 20 cm. Pocitac by se pohanel stlacenym > vzduchem (vycistenym a vysusenym) z bomby nebo z kompresoru. > > Detaily jeste nemam rozmyslene, ale napriklad takto (pomoci trubek ve tvaru > Y) jde udelat pamet jednoho bitu: > > power > | | > | | > ==== === control > / \ > / /\ \ > out1 out2 > > Kdyz se k power privede tlakovy vzduch, tak se ten prilne k jedne ze sten a > vychazi z out1 xor z out2 a pomoci "psouknuti" z trubek control zleva do > prava nebo naopak to lze prepinat. Podobne se da udelat NAND a z nej uz lze > postavit zbytek. Nevyhoda je, ze je to pomaly (omezeny rychlosti zvuku ve > vzduchu -- kdyby se pouzilo helium tak by se rychlost zvysila pouze 3* > takze > to asi nema cenu -- rozhodne cim mensi prvky tim bliz k sobe a tim > rychlejsi > pocitac ale jsme omezeni presnosti RepRapu a pro velmi tenke potrubi by > mohla byt viskozita vzduchu uz problem). > > Vyhoda je ze si pocitac muzeme navrhnout cely sami jak se nam libi a kdyz > by > se vytiskl pruhlednym plastem tak by bylo videt skrz, coz by se dalo > pouzit pro vyuku, nebo alespon popularizaci. > > Dalsi prakticka vyhoda je, ze by byl (slovy robota z futuramy) `impervious > to our most powerful magnetic fields (yet in the end it would succumb to a > harmless sharpened stick)'. Takze mozna, ze by takovy pocitac i treba nasel > skutecne vyuziti v radiaci zamorenem prostredi (i kdyz me nenapada co by > tam > mohl pri tak nizkem vykonu uzitecneho pocitat). > > Predstavuju si, ze do ROMky by se naprogramoval interpret FORTHu a jedna > stena pameti RAM by se udelala pruhledna a do OUT2 by se dala nejaka > kulicka > ktera se otoci spravnou barvou ven kdyz to na ni fouka, takze by se to > chovalo jako obrazovka. Klavesnice by tez sla vyrobit vduchova a pak by > jeste bylo potreba mit nejake elektromechanicke zarizeni ktere by emulovalo > seriovou linku na rekneme 600 Bd, aby bylo odkud nacist a kam ukladat data, > ktera maji prezit vypnuti stroje. > > Idealni by bylo, kdyby se podarilo na RepRapu vytisknou prepinaci element > ve > velikosti (dovnitr krychle) 2*2*2 mm^3. Pak by jich mohlo v krychli > pocitace > byt 10^6, ve skutecnosti rekneme 10^5, protoze nekde musi vest sbernice, > napajeni, vyfuk a nosne prvky. Ale i 10^5 by melo pro konstrukci takoveho > jednoducheho pocitace stacit. > > Ze zacatku bych zkoumal jestli to vubec bude fungovat kdyz RepRap neudela > vnitrni steny trubek uplne hladke, a jak moc to pujde zmensit. Pak bychom > treba mohli postavit oscilator, NAND, pamet, citac, scitacku, ALU a > postupne > zbytek CPU a pameti. > > Pochopitelne bych to nechtel cele delat rucnim zadavanim tvaru, chtel bych > vytvorit neco jako kompilator z VHDL nebo Verilogu do 3D popisu. Ten > kompilator by mel zohlednit fyzikalni omezeni (tlakova ztrata), pripadne > sam > generovat obnovovaci zesilovace, mel by umet pocitat kde bude jaka teplota > pri expanzi plynu a jak dlouho poleti signal potrubim a jestli toto > zpozdeni > uz nezpusobi tzv. hazard, atd. > > Zatim je to jen blazniva myslenka a nevim jestli to nekoho bude zajimat, na > druhou stranu nevim, ze by se v soucasnosti nekdo o neco podobneho pokousel > (v minulosti nejake pneumaticke pocitace zkonstrovany byly, ale z > diskretnich prvku, ze by ho nekdo tiskl na 3D tiskarne jsem neslysel). > > Mohl by to byt projekt (alespon ze zacatku) unikatni pro brmlab. > > Tak pokud ma nekdo zajem, ozvete se. > > > David > > > _______________________________________________ > Announce mailing list > Announce(a)v.or.cz > http://rover.ms.mff.cuni.cz/mailman/listinfo/announce -- S pozdravem Best regards Tomáš Mudruňka - Spoje.net / Arachne Labs XMPP/Jabber: harvie(a)jabbim.cz, ICQ: 283782978

1 0

je nekdo dnes vecer v brmlabu?
by Frantisek Apfelbeck 30 Mar '11

30 Mar '11

Zdravim ve Spolek! Chci se zeptat, zda bude nekdo dnes vecer tak po seste v brmlabu, rad bych zasel. Ahoj Frantisek

5 4

Re: [Brmlab] Food hacks from Singapore
by Pavol Rusnak 30 Mar '11

30 Mar '11

On 30/03/11 02:51, Denisa Kera wrote: > Ahoj, > > Delam vyzkum na DIYbio & Hackerspace po svete, momentalne ziju a pracuju > v Singapuru, kde s lokalnim Hackerspace.SG spolupracuju na nekolik > projektu z oblasti design & umeni > https://diybiosingapore.wordpress.com/ . V Praze budu v kvetnu, a tak > me napadlo, ze bych udelala tu 5 min prezentaci projektu kolem jidla, > na kterych pracuju, neni to zadny technicky zazrak, ale spis takovy > experiment s novymi sluzbami a napady kolem sdileni jidla a interakci > pres jidlo... V obasti design me zajima otazka "interaction between > (familiar) strangers", jak sdili informace o DNA datech apod. Puvodem > jsem z Prahy. Pokud tady to neni uplne mimo, dejte vedet, zda muzu > vystoupit & nezavisle na tom bych se rada navstivila nektere z akci > mezi 4.5 az 15.5 kdy budu v Praze, a proste obecne me zajima na cem > pracujete, troche to sleduju pres Facebook. Zdravim! Urcite ta radi uvidime v nasom hackerspace! Kludne sa mozme dohodnut aj na dlhsej prednaske mimo ramca Lightning Talkov, zavisi len od teba. Myslim, ze by to bolo vhodnejsie, kedze sa mi zda, ze tvoj zaber je o dost vacsi akoby sa dalo zhrnut do 5 minut. :-) Idealne je prist sa na nas pozriet v utorok (zhruba od 19:00 do neskoreho vecera), vtedy mame pritomnych najviac clenov (pravidelny meetup). Ak by bol zaujem o dlhsiu prednasku, tak je lepsie zrejme v iny den ako utorok (ten je dost hekticky). Detaily dopilujeme potom koncom dubna/zaciatkom kvetna. Na komunikaciu je potom lepsie zvolit obecny mailing list brmlab(a)brmlab.cz (v CC) aby sa do debaty mohlo zapojit co najviac clenov. Maj sa pekne! -- Best Regards / S pozdravom, Pavol Rusnak <stick(a)gk2.sk>

3 3

Re: [Brmlab] je nekdo dnes vecer v brmlabu?
by rainbof＠gmail.com 30 Mar '11

30 Mar '11

já od 18-19 Dne uživatel Radka Haneckova <chidori(a)emptytriangle.com> napsal: > ahoj, > ja tam budem. > chido > 2011/3/30 Frantisek Apfelbeck algoldor(a)yahoo.com>: > > Zdravim ve Spolek! > > Chci se zeptat, zda bude nekdo dnes vecer tak po seste v brmlabu, rad > bych > > zasel. > > > > Ahoj Frantisek > > > > _______________________________________________ > > Brmlab mailing list > > Brmlab(a)brmlab.cz > > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab > > > -- > "It is not birth, marriage, or death, but gastrulation which is truly > the most important time in your life." Lewis Wolpert > _______________________________________________ > Brmlab mailing list > Brmlab(a)brmlab.cz > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

1 0

Your stipend for Great Global Hackerspace Challenge
by Sally Stillman 29 Mar '11

29 Mar '11

Hi there I'm part of the GGHC support team, here in San Francisco. We don't seem to have received your details on how you would like to receive your $900 stipend. If Paypal works for you, please send details as soon as you can. If you have any questions, please let me know. Best Sally -- SALLY STILLMAN | SILVERFOX | 415.359.6224 twitter.com/agentsilverfox facebook.com/culturewins

1 0

Sbirka na LEDky do ledbaru
by Petr Baudis 29 Mar '11

29 Mar '11

Ahoj! V projektu ledbar (http://brmlab.cz/project/ledbar; rada silnych RGB ledek, sviticich na chodnik vedouci podel brmlabu - skvela hracka na zaujmuti kolemjdoucich a zaujme snad i na ruznych brmlabich akcich) jsme dosli do faze, kdy mame pomerne finalizovane elektricke zapojeni i dobrou predstavu o konstrukci, proto prisel cas nakoupit LEDky samotne. Jedna LEDka stoji 150Kc, coz uz neni trivialni castka, proto potrebujeme Vasi pomoc s financovanim! :-) Libi-li se Vam projekt, prosime o prispeni! Staci se pripsat na wiki nebo mi poslat mail, a az mne uvidite, dat mi penize (LEDky uz jsem objednal). 13 LEDek uz jsme sesbirali na meetupu, na dalsich 11 musime jeste penize sehnat. Diky Vam, Petr "Pasky" Baudis

1 0

zadost o pomoc
by jens.retron＠seznam.cz 29 Mar '11

29 Mar '11

zdarbuh, Jak sem psal na fcb potreboval nych pomoc s timto napadem. Vec se ma tak ze sem prisel na to ue by se dal postavit pristroj na prenaseni emoci z cloveka na clovwka. Nechal se, se inspirovat eeg kdy se zobrazuje mozkova cinnost (radove od 0 do 40hz). Domnivam se ze by se toto dalo zaznamenat a prehrat. Zakladem sestavy jsou cidla umistena na hlave, ktera dokazou zaznamenat infrazvuk, nizkofrwkvencni zesilovac (nevim ale jak si poradit s vysokou mirou sumu, kterana twchto frwkvencich vznika) a pocitac s programem ktery dokaze tyto frwkvence zaznamenat (cili je potreba napsat program protoze bezne nahravaci programy pracuji az od cca. 30hz a vys) a stejnou cestou prehrat na jiinou osobu pomoci rezonatoru ( ve stejnym poctu jako cidla na uacatku sestavy) zaznam mozkove cinnosti prvniho cloveka. Myslim si ze na urcity vlnovy delce, pro presnem prezkoumani se nalezaji i konkretni pocity a tonemluvim o tom ze jdou pocity v podstate vytvorit. Takhle podobne funguje psychowalkman, kt ery dostava mozek do frekvencni hladiny alfa (tedy koncentrace)presto si myslim ze pri presne zvolene frekvenci lue lidsky mozek ovlivnit do te miry ze vyvola primo konkretni pocit. To je asi tak vse tak pro zacatk vse diky predem za odpoved jens

3 2

project "collisions"
by Florian Bittner 25 Mar '11

25 Mar '11

hi guys! when i was reading this thread in the morning i had mixed feelings in my stomach .. but not anymore. first of all i think that every space should pick their prroject as they like and implement it the way they think it should be done. secondly our projects are very similar but not exactly the same.. and the idea is simple and universal so its not a big surprise that our space is not the only one to come up with that. i do not want to discourage anyone in their projects and i dont want anyone else to claim who had which idea first, this is bound to cause drama and headaches.. i dont think we need this :) if everyone sticks to their original plans and implements what they came up with it will be very interesting and after 6 weeks we can compare our final implementations and maybe come up with another solution that integrates the best concepts of all the similar projects?! me personally i dont need to win a prize in this.. i think its a great chance to give the world a cool tool for education and get to know interesting guys with open minds all over the world. i wish you all the best and good luck! -overflo On 03/25/2011 08:38 AM, James Gray wrote: > Now stop that - at this rate, no one will do it. > > James > > > > > On Fri, Mar 25, 2011 at 12:37 AM, Mats Engstrom<mats.engstrom(a)gmail.com>wrote: > >> It seems like great minds think alike :-) >> >> Yesterday I was making a short list of possible projects for the >> Hackerspace in Kuala Lumpur and one of the projects was actually also a >> "edu-clicker" -like system. >> >> I suppose it can safely be removed from our list now then since two other >> spaces already might be doing a device like that. >> >> /mats >> >> >> On Fri, Mar 25, 2011 at 13:28, Tomislav Arnaudov<sargonout(a)gmail.com>wrote: >> >>> Hello >>> Personally I think that two similar projects is not bad idea >>> because we have many goals which can be achieved >>> simplicity , final prize and of course how project will be presented ... >>> >>> happy hacking >>> Sargon >>> Brmlab Hackerspace Prague >>> >>> >>> 2011/3/25 Ricky<rngadam(a)gmail.com> >>> >>>> Oh noees! >>>> >>>> I joined after you guys, posted in our blog the same idea as yours >>>> (EDUBUZZER; https://metalab.at/wiki/HSC2011 )! >>>> >>>> >>>> http://www.element-14.com/community/groups/xinchejian-gghc/blog/2011/03/25/… >>>> >>>> (although believe me, we actually came up with the idea two days ago >>>> and I have the email headers to prove it) >>>> >>>> Argh, now we have to find something else! >>>> >>> >>> >> >

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

Brmlab