IPL Status SRCs
As the system performs an IPL, SRCs appear on the control panel. The SRCs
indicate the status of the IPL and are often useful in problem analysis. The
following list provides information on the IPL process and shows some SRCs (in
numeric order) that can appear during an IPL.
IPL SRC
Function Performed
C1xx 1xxx
-
Service Processor ROS IPL in progress
C1xx 1006
Service processor ROS loading RAM from MFIOP directed device
C1xx 1007
Service Processor ROS retrying attempt to load RAM from MFIOP directed
device
C1xx 1008
Service Processor ROS attempting to load RAM from non-MFIOP directed
device
C1xx 1009
Service Processor ROS retrying attempt to load RAM from non-MFIOP
directed device
C1xx 1016
Service Processor ROS attempting to load RAM from MFIOP default device
C1xx 1018
Service Processor ROS attempting to load RAM from non-MFIOP default
device
C1xx 1019
Service Processor ROS retrying attempt to load RAM from non-MFIOP
default device
C1xx 100C
Service processor ROS IPL complete, branch to RAM Loader
C1xx 1030
Loading Service Processor system LIC from MFIOP device
C1xx 1050
Loading Service Processor system LIC from non-MFIOP device
C1xx 2001
Service Processor is setting up to test and load system processor
C1xx 2002
Service processor is testing system processor and main storage
C1xx 2003
Service processor is loading system processor
C100 2034
LIC (system) has been initialized; control has passed to system processor
C1xx 2050
Service Processor is waiting for Load Source device
C1xx 2060
Service Processor started a read command from Load Source
C1xx 2090
Service Processor completed a read command from load source
C1xx 80xx
Service Processor/Control Panel communication in progress
C1xx 805x
Service Processor is loading Control Panel LIC
C1xx B1xx
Basic assurance test completed on MFIOP
180 AS/400 Service Functions V4R5
C100 D009
LIC (system) running initialization
C200 1xxx
Secondary Partition Early IPL Initialization Phase
C200 1100
Adding partition resources to the secondary configuration
C200 11FF
Partition resources added successfully
C200 2xxx
Secondary Partition SPCN Tower Power ON Phase
C200 1200
Checking if IPL is allowed
C200 12FF
Partition IPL is allowed to proceed
C200 1300
Initializing ISL roadmap
C200 13FF
ISL roadmap initialized successfully
C200 1400
Initializing SP Communication Area #1
C200 1410
Initializing IPL parms
C200 14FF
IPL parms initialized successfully
C200 3xxx
Secondary Partition Bus Unit ISL Phase
C200 3100
Validating ISL command parameters
C200 3111
Waiting for Bus object to become operational
C200 3112
Waiting for bus unit to become disabled
C200 3150
Sending ISL command to bus unit
C200 31FF
Waiting for ISL command completion
C200 32FF
ISL Command complete successfully
C200 4xxx
Secondary Partition Load Source Device Connection Phase
C200 4100
Waiting for load source device to enlist
C200 4200
Load source device has enlisted
Chapter 6. System Reference Code (SRC) Information 181
C200 4300
Preparing connection to load source device
C200 43FF
Load source device is connected
C200 5xxx
Secondary Partition Main Storage Dump Phase
C200 5100
Preparing to initiate MSD phase
C200 5110
Loading SID 82 from load source device
C200 5115
MSD Phase I
C200 5120
Writing processor registers into SID 82
C200 5125
MSD Phase II
C200 5130
Writing mainstore pages to the load source device
C200 5135
MSD Phase III
C200 5140
Storing (final) SID 82 back to the load source device
C200 5150
Allocating the hardware page table
C200 51FF
MSD processing complete
C200 6xxx
Secondary Partition Load LIC From Load Source Phase
C200 6000
Locating First LID information on the loadsource
C200 6010
Locating Next LID information on the loadsource
C200 6020
Verifying LID information
C200 6030
Priming LP Configuration LID
C200 6040
Preparing to initiate LID load from loadsource
C200 6050
LP Configuration LID primed successfully
C200 6060
Waiting for LID load to complete
C200 6100
LID load completed successfully
182 AS/400 Service Functions V4R5
C200 7xxx
Secondary Partition Load Source Device Disconnection Phase
C200 7100
Disconnecting from load source device
C200 7110
Preparing to remove the load source IOP from the primary partition
C200 7120
Load source IOP has been successfully removed from the primary partition
C200 71FF
Load source is successfully disconnected
C200 8xxx
Secondary Partition Start Processors Phase
C200 8100
Initializing SP Communication Area #2
C200 8104
Loading data structures into mainstore
C200 8110
Initializing event paths
C200 8120
Starting processors
C200 81FF
Processors started successfully, now waiting to receive the continue
acknowledgment from SLIC
C200 8200
Continue acknowledgment received from SLIC
C200 82FF
VSP IPL complete successfully
C3xx xxxx
System Processor or Main Storage Diagnostic in progress
C5xx xxxx
LIC system hardware initialization
C500 C92B
Waiting for console device - error condition only if console not found
C6xx 1800
LIC SPCN setup
C600 3900
SP transfer control of Bus 1 (BCU Switch) to LIC is Complete and LIC
Machine Facilities component is initialized
C600 3910
LIC has initiated PCI Bus Reset to all Bus 1 devices except the SP
C600 3911
LIC has initiated self test of all Bus 1 devices except the SP
C600 3912
LIC is initiating IPL of the Load Source IOP
Chapter 6. System Reference Code (SRC) Information 183
C600 3913
LIC is initializing the Load Source IOP messaging functions
C600 3914
LIC has detected a Load Source IOP problem and is resetting the IOP, or
the IOP has requested a reset after an internal Flash memory LIC update
C600 3915
LIC has initiated the Load Source IOP self-load
C600 3916
During self-load, the Load Source IOP signalled LIC that it is initiating an
internal Flash Memory update or other critical function
C600 3917
The Load Source IOP has completed IPL of its operational load, LIC is
waiting for the IOP to report its attached IO resources
C600 4001
Static paging
C600 4002
Start limited paging, call LID manager
C600 4003
Initialize IPL/Termination (IT) data area / set up node address
communication area (NACA) pointer
C600 4004
Check and update MSD SID
C600 4005
Initialize event management is running
C600 4006
IPL all buses
C600 4007
Start error log ID
C600 4008
Initialize I/O service
C600 4009
Initialize I/O machine
C600 4010
Initialize IDE (interactive device exerciser)
C600 4011
Initialize remote services
C600 4012
Initialize RMAC component data values
C600 4013
Initialize context management
C600 4014
Initialize RM (component) seize lock
C600 4015
Initialize MISR
C600 4016
Set time of day
184 AS/400 Service Functions V4R5
C600 4017
Initialize RM (component) process management
C600 4018
Initialize error log
C600 4019
Restart the service processor
C600 4020
Initialize machine services
C600 4021
Initialize performance data collector
C600 4022
Initialize event management
C600 4023
Create MI boundary manager tasks
C600 4024
Disable CPM
C600 4025
Initializes battery test
C600 4026
Hardware card checkout
C600 4027
Start integrated device exerciser (Type C IPL only)
C600 4028
Start DST
C600 4029
Make IPL task not critical
C600 4030
Free static storage
C600 4031
Destroy IPL task
C600 4050
Storage management recovery is running
C600 4051
Start LOG is running
C600 4052
Trace table initialization is running
C600 4053
Context rebuild is running
C600 4054
Start product activity log and Advanced Peer-to-Peer Networking® (APPN)
is running
C600 4055
Authority recovery is running
C600 4056
Journal recovery is running
Chapter 6. System Reference Code (SRC) Information 185
C600 4057
Database recovery is running
C600 4058
Journal synchronization is running
C600 4059
Commit recovery is running
C600 4060
Database initialization is running
C600 4061
Journal IPL clean up is running
C600 4062
Commit initialization is running
C600 4064
System Object Model™ (SOM) recovery is running
C600 4065
Start operating system is running
C600 4100
Searching for Load Source Candidate (D-mode only)
C600 4101
Opening media-file to install LIC service displays with proper National
Language Version
C600 4102
Loading and linking from media-file to install LIC service displays with
proper National Language Version
C600 4201
Storage management recovery
C600 4204
Synchronization of mirrored MSD
C6xx 4205
Synchronization of mirrored data (where xx is percent complete).
C600 4240
Reclaim main storage
C600 4250
Storage management subset directory recovery
C600 4255
Defragmentation utility
C600 4260
Storage management directory recovery
C600 4272
ASP overflow recovery
C600 4300
Static paging is available for the link loader
C600 4301
Applying temporary PTFs. If the IPL stops at this point, you might need to
install the Licensed Internal Code again.
186 AS/400 Service Functions V4R5
C600 4302
Applying modules. If the IPL stops at this point, you might need to install
the Licensed Internal Code might again.
C600 4303
Temporarily applied PTFs have reached the static paging phase
C600 432A
Resolving references to run Mode A; you can safely stop the system while
it is doing this work.
C600 432B
Resolving references to run Mode B. You may safely stop the system while
it is doing this work.
C600 4330
Full paging is available; workstation HRI processing
C600 4331
Freeing unused nucleus pages
C600 4332
Permanently applying PTFs. If the IPL stops at this point, you may need to
install the Licensed Internal Code again.
The following SRCs can appear during an MSD IPL.
C6xx 4400
Unattended DASD checker started
C6xx 4401
Attended DASD checker started
C600 4402
Main storage dump manager and storage management recovery started
C600 4403
Storage management recovery ended
C6xx 4404
LIC log started (where xx is dump copy percent completed).
C600 4405
Dump auto copy completed. Shutdown or programmed IPL has started.
C600 4406
Shutdown or programmed IPL (MSD related) has started.
End of MSD IPL SRCs.
The following SRCs can appear during a CPM IPL.
C6xx 4410
Unattended DASD checker started
C6xx 4411
Attended DASD checker started
C600 4412
Storage management recovery started
C600 4414
LIC log started
Chapter 6. System Reference Code (SRC) Information 187
C600 4416
Shutdown or programmed (CPM-related) IPL has started
End of CPM IPL SRCs.
The following are DST SRCs for Attended IPLs.
C600 4500
Verifying network attributes
C600 4501
Looking for the console
C600 4502
Starting DST display task
C600 4503
Checking possible machine-readable information (MRI) on media
C600 4504
Verifying system serial number
C600 4505
Verifying system type
C600 4506
Verifying system-unique ID (
OS/400 only)
C600 4507
Starting ’before DST’ DASD checker
C600 4508
Verifying system password (if DASD check OK; if not OK this is checked
when IPLing past DST)
C600 4509
Starting DASD migration function (only if migrating)
C600 450A
Starting ’after DST’ DASD checker (can happen twice)
The following are DST SRCs for Unattended IPLs.
C600 4500
Verifying network attributes
C600 4504
Verifying system serial number
C600 4505
Verifying system type
C600 4506
Verifying system-unique ID (
OS/400 only)
C600 4508
Verifying system password (if DASD check OK)
C600 450A
Starting ’after DST’ DASD checker
End of DST SRCs for Unattended IPLs.
C600 4A57
Parallel database recovery is at Pass 1
188 AS/400 Service Functions V4R5
C600 4A60
Parallel database initialization is at Pass 1
C600 4B57
Parallel database recovery is at Pass 2
C600 4B60
Parallel database initialization is at Pass 2
C600 4C57
Parallel database recovery is at Pass 3
C600 4C60
Parallel database initialization is at Pass 3
C600 4F57
The system is recovering all database objects. This step can take several
hours. It can occur any time when database recovery is in progress.
C600 4F60
The system is examining all objects during database initialization. It can
occur any time when database initialization is in progress.
Note: At this point LIC initialization is complete, and operating system starts. All
hardware is verified.
IPL SRC
Function Performed
If the system uses the
OS/400 operating system, the following status SRCs appear:
C900 2810
Reclaim machine context
C900 2820
Resolve system objects
C900 2825
Convert Work Control Block Table
C900 2830
System value object
C900 28C0
Prepare SPCF job
C900 28C5
Initialize system objects
C900 2910
Start system logging
C900 2920
Library and object information repository (OIR) cleanup
C900 2925
Verify POSIX** root directories
C900 2930
Database cross-reference
C900 2940
Console configuration
Chapter 6. System Reference Code (SRC) Information 189
C900 2950
Install complex objects
C900 2960
Sign on processing
C900 2965
Software Management Services (SMS) initialization
C900 2967
Applying PTFs
C900 2968
IPL options
C900 2970
Database recovery part 1, journal recovery part 1
C900 2973
This recovery step attempts to perform any needed recovery for Database
files that were definitionally being changed, created or deleted when an
abnormal system end occurred.
C900 2976
This recovery step verifies the object recovery list performs any needed
recovery for Journals and Journal Receivers.
C900 2978
This IPL Status SRC is displayed when SRCs C900 2A70 - C900 2976 have
been completed
C900 2980
Storage requirements
C900 2990
Performance adjustments
C900 29A0
System control block
C900 29B0
Spool initialization
C900 29C0
Work control block table
C900 2A80
Before starting system jobs
C900 2A85
Bringing up POSIX SAG
C900 2A87
POSIX SAG restart and signals initialization
C900 2A90
Starting system jobs
C900 2A95
Abnormal Work Control Block Table cleanup
C900 2AA0
Damage Notification
190 AS/400 Service Functions V4R5
C900 2AA1
This recovery step either rolls back or completes certain uncompleted
Database operations that were run under Commitment Control
C900 2AA2
This recovery completes certain Journal operations that were in progress
when the system ended processing
C900 2AA3
This recovery sends messages to QHST for Database files that may have
been damaged by a system end
C900 2AA3
This recovery sends messages to QHST for Database files that may have
been damaged by a system end
C900 2AA4
This IPL Status SRC is displayed when SRCs C900 2AA0 - C900 2AA3
have been completed
C900 2AA5
Integrated File System/New File System (NFS) directory recovery
C900 2AB0
Database Recovery part 2
C900 2AC0
Document Library Object (DLO) recovery
C900 2B10
Establish event monitors
C900 2B30
QLUS job
C900 2B40
Device configuration
C900 2C10
After system arbiter
C900 2C20
SNADS recovery
C900 2C25
ZMF component (Mail Enablement (OeDS) Framework) recovery
C900 2C40
Work Control Block Table cleanup
C900 2F00
IPL Complete
Operating system initialization is complete when the sign-on screen displays on
the console.
General Status SRCs
The following list contains general status SRCs that are listed in numeric order.
The xx that is used in the SRCs represents a hexadecimal number further defining
the code.
Status Function Performed
Chapter 6. System Reference Code (SRC) Information 191
D100 8000
Service Processor (SP) is in the process of powering down.
D100 8025
Power down SPCN. This SRC appears during the system shutdown for
Continuously Powered Main Storage (CPM). When the system is in CPM,
the control panel is off, and the display is dark.
D1xx 3xxx
Service Processor portion of MSD in progress
D1xx 30xx
Preparing or writing to disk
D1xx 31xx
System is preparing segment ID 82 data area
D1xx 3200
Preparing or writing from main storage
D1xx 32xx
The last MSD status SRC. xx+1 is the number (in hexadecimal) of 16MB
blocks that are dumped from main storage.
D1xx 8000
Service Processor is in the process of powering down
D1xx 8025
Service Processor is in the process of powering down in CPM mode
D1xx 8030
Service Processor has received a Delayed Power Off request
D1xx 8035
Service Processor Delayed Power Off request has timed out. Main store
dump will follow.
D1xx D505
MFIOP Initialization in progress
D200 xxxx
Secondary Partition Power OFF Phase
D6xx 0298
System shut-down started
D6xx 0483
Power failed; delay timer is running
D6xx 0484
MI run in progress
D6xx 5500
System shut-down status; attempting to delete information from the disk
subsystem cache
D6xx 5501
System shut-down status; indicates that the information from the disk
subsystem cache was deleted successfully
D6xx 5502
System shut-down status; indicates that the system failed to delete
information from the disk subsystem cache
192 AS/400 Service Functions V4R5
D6xx 5503
System shut-down status, which indicates the information from the disk
subsystem cache was deleted with qualified success
D900 2740
Power down immediate
D900 2750
All subsystems ended
D900 2760
Device configuration shutdown
D900 2770
QLUS job ending
D900 2780
Close database cross-reference files
D900 2790
QSYSARB job ending
D900 27C0
System jobs are ending