From pasky at ucw.cz  Sat Dec  1 14:05:18 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Sat, 1 Dec 2012 14:05:18 +0100
Subject: [Brmlab] tech rider
In-Reply-To: <50B9FD6A.4000507@fundamental.art.pl>
References: <20121121191259.GD18378@machine.or.cz>
	<50B10C54.2070104@fundamental.art.pl>
	<20121124191731.GH18378@machine.or.cz>
	<50B13253.7060503@fundamental.art.pl>
	<20121124210859.GK18378@machine.or.cz>
	<50B3CEEF.7060501@fundamental.art.pl>
	<20121126202508.GW18378@machine.or.cz>
	<50B9FADF.3060107@fundamental.art.pl>
	<20121201124735.GA18378@machine.or.cz>
	<50B9FD6A.4000507@fundamental.art.pl>
Message-ID: <20121201130518.GC18378@machine.or.cz>

On Sat, Dec 01, 2012 at 01:51:54PM +0100, Robert B. Lisek wrote:
> I need some sound equipment for presentation:
> 8-channel mixer, audio monitors, subwoofer, projector
> do you have any?

Not sure if our main mixer has 6 or 8 channels, but we have some smaler
ones too so hopefully we should be able to put that together. No idea
what "audio monitor" is. We do have a subwoofer and projector.

				Petr "Pasky" Baudis


From jenda at hrach.eu  Sat Dec  1 18:34:42 2012
From: jenda at hrach.eu (Jan Hrach)
Date: Sat, 01 Dec 2012 18:34:42 +0100
Subject: [Brmlab] =?utf-8?q?Zh=C3=A1=C5=88ame_server_do_brmlabu?=
In-Reply-To: <522923936-1354276498-cardhu_decombobulator_blackberry.rim.net-280514012-@b4.c4.bise7.blackberry>
References: <CAAO3Qb6yuYWLwbQ5GG+NxB=25La8CS6QsEySRxcEjD_Fy=RLdA@mail.gmail.com>
	<20121129083530.42312a7f@sam.yac>
	<20121129210656.GN8089@machine.or.cz>
	<20121129225231.7a6d3055@sam.yac>
	<20121129225122.GO8089@machine.or.cz>
	<50B88036.7050106@hysteria.cz> <50B88608.7010005@hysteria.cz>
	<522923936-1354276498-cardhu_decombobulator_blackberry.rim.net-280514012-@b4.c4.bise7.blackberry>
Message-ID: <50BA3FB2.40503@hrach.eu>

https://www.abclinuxu.cz/bazar/show/369424
M?lo RAM a kdo v?, jestli to m? virtualizaci.

Jinak kdy? se pod?v?te do brmracku, uvid?te, ?e nen? probl?m narvat tam je?t? jeden tower, tak?e nen? pot?eba rackov? sk??? ;)

V brmvidu jsou voln? disky 2x160 GB, p??padn? se d? p?es s?? p?ipojit z datastroje ten p?titerov? RAID, n?kde se tam v?l? m?j funk?n? zdroj (350 W) a n?jak? grafiky (do serveru bohat? dosta?uj?c?), tak?e i na tom by ?lo ?et?it.

On 30.11.2012 12:54, rainbof at gmail.com wrote:
> Na abclinuxu je nejaky u server. Mozna dokonce za odvoz. Nejspis ucko.
> odeslano z blackberry 9900 (iphone sucks)
> 
> -----Original Message-----
> From: caha <caha at hysteria.cz>
> Sender: brmlab-bounces at brmlab.cz
> Date: Fri, 30 Nov 2012 11:10:16 
> To: <brmlab at brmlab.cz>
> Reply-To: "Brmlab: Hackerspace Prague \(main discussion\)" <brmlab at brmlab.cz>
> Subject: Re: [Brmlab] Zh??ame server do brmlabu
> 
> aha, ona by mela bejt prej rackova, tak upresnuji ze bohuzel pouze
> normalni PCckove
> 
> caha napsal(a):
>> bednu rozhodne nekupujte, skoda penez. Mame jich mraky (tech beden ;o) )
>> a radi venujeme ...
>>
>> caha
>>
>> Petr Baudis napsal(a):
>>> On Thu, Nov 29, 2012 at 10:52:31PM +0100, yac wrote:
>>>> On Thu, 29 Nov 2012 22:06:57 +0100
>>>> Petr Baudis <pasky at ucw.cz> wrote:
>>>>
>>>>> On Thu, Nov 29, 2012 at 08:35:30AM +0100, yac wrote:
>>>>>> On Wed, 28 Nov 2012 18:24:43 +0100
>>>>>> Mgr. Martin ?ember <zember at gmail.com> wrote:
>>>>>>
>>>>>>> Ahoj,
>>>>>>> nem?te niekto na predaj server, alebo neviete o takom?
>>>>>>>
>>>>>>> Vy?adovan? HW podpora virtualiz?cie, maj? na tom be?a? 1-6
>>>>>>> virtu?lnych strojov.
>>>>>>> V pr?pade pou?it?ho HW, cena do 8000K?...
>>>>>>>
>>>>>>> Do brm-racku :-)
>>>>>>>
>>>>>>> M?
>>>>>>
>>>>>> Za 8k takovouhle vec koupis novou
>>>>>
>>>>> Holy motherboard, CPU, RAM a PSU asi ano, disk uz nevim jestli do toho
>>>>> nacpes.  Ale s rackovovou chassis? Link or it didn't happen. :)
>>>>>
>>>>> 				Petr "Pasky" Baudis
>>>>> _______________________________________________
>>>>> Brmlab mailing list
>>>>> Brmlab at brmlab.cz
>>>>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>>>
>>>> http://www.alza.cz/gigabyte-970a-ds3-d308659.htm
>>>> http://www.alza.cz/sapphire-hd-5450-d154355.htm
>>>> http://www.alza.cz/amd-phenom-ii-x4-965-black-edition-d145518.htm
>>>> http://www.alza.cz/corsair-8gb-kit-ddr3-1600mhz-cl11-d357016.htm
>>>> http://www.alza.cz/fortron-ax400-60apn-350w-d126404.htm
>>>> 6200,-
>>>
>>> Jiste. I kdyz osobne bych volil radeji
>>>
>>> http://www.alza.cz/gigabyte-a75m-ds2-d359304.htm
>>> http://www.alza.cz/amd-a6-x4-3670-d284911.htm
>>>
>>> a dropnul zvlast grafickou kartu.
>>>
>>>> Do toho se disk prida bez problemu. Skrin nepotrebuju, neznam, neresim.
>>>
>>> No pouzit misto skrine krabici od club mate je z mnoha ohledu
>>> dost problematicke, chassis mi prijde jako jeden z nejklicovejsich
>>> atributu serveru. Na druhou stranu sehnat pouzitou chassis by nemel
>>> byt tak velky problem, a hlavne i nove jsou mnohem levnejsi, nez
>>> jsem myslel (2100Kc):
>>>
>>> 	http://www.alza.cz/eurocase-ipc-1u-600-cerna-d243731.htm
>>>
>>> (Pozor, je tam nejaka sleva, ktera plati jen do 2.12.)
>>>
>>> V tu chvili beru, ze je asi nejrozumnejsi si to s rozpoctem 8kKc
>>> postavit sam z novych komponent - bude to mit rozhodne lepsi vykon
>>> a jeste na to bude zaruka.
>>>
>>> Jen nevim, kde do toho vzit matching zdroj.
>>>
>>> 				Petr "Pasky" Baudis
>>> _______________________________________________
>>> Brmlab mailing list
>>> Brmlab at brmlab.cz
>>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>>
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121201/0b37205a/attachment.pgp>

From jenda at hrach.eu  Sun Dec  2 00:13:34 2012
From: jenda at hrach.eu (Jan Hrach)
Date: Sun, 02 Dec 2012 00:13:34 +0100
Subject: [Brmlab] =?utf-8?q?Zh=C3=A1=C5=88ame_server_do_brmlabu?=
In-Reply-To: <522923936-1354276498-cardhu_decombobulator_blackberry.rim.net-280514012-@b4.c4.bise7.blackberry>
References: <CAAO3Qb6yuYWLwbQ5GG+NxB=25La8CS6QsEySRxcEjD_Fy=RLdA@mail.gmail.com>
	<20121129083530.42312a7f@sam.yac>
	<20121129210656.GN8089@machine.or.cz>
	<20121129225231.7a6d3055@sam.yac>
	<20121129225122.GO8089@machine.or.cz>
	<50B88036.7050106@hysteria.cz> <50B88608.7010005@hysteria.cz>
	<522923936-1354276498-cardhu_decombobulator_blackberry.rim.net-280514012-@b4.c4.bise7.blackberry>
Message-ID: <50BA8F1E.7080700@hrach.eu>

https://www.abclinuxu.cz/bazar/show/369424
M?lo RAM a kdo v?, jestli to m? virtualizaci.

Jinak kdy? se pod?v?te do brmracku, uvid?te, ?e nen? probl?m narvat tam je?t? jeden tower, tak?e nen? pot?eba rackov? sk??? ;)

V brmvidu jsou voln? disky 2x160 GB, p??padn? se d? p?es s?? p?ipojit z datastroje ten p?titerov? RAID, n?kde se tam v?l? m?j funk?n? zdroj (350 W) a n?jak? grafiky (do serveru bohat? dosta?uj?c?), tak?e i na tom by ?lo ?et?it.

On 30.11.2012 12:54, rainbof at gmail.com wrote:
> Na abclinuxu je nejaky u server. Mozna dokonce za odvoz. Nejspis ucko.
> odeslano z blackberry 9900 (iphone sucks)
> 
> -----Original Message-----
> From: caha <caha at hysteria.cz>
> Sender: brmlab-bounces at brmlab.cz
> Date: Fri, 30 Nov 2012 11:10:16 
> To: <brmlab at brmlab.cz>
> Reply-To: "Brmlab: Hackerspace Prague \(main discussion\)" <brmlab at brmlab.cz>
> Subject: Re: [Brmlab] Zh??ame server do brmlabu
> 
> aha, ona by mela bejt prej rackova, tak upresnuji ze bohuzel pouze
> normalni PCckove
> 
> caha napsal(a):
>> bednu rozhodne nekupujte, skoda penez. Mame jich mraky (tech beden ;o) )
>> a radi venujeme ...
>>
>> caha
>>
>> Petr Baudis napsal(a):
>>> On Thu, Nov 29, 2012 at 10:52:31PM +0100, yac wrote:
>>>> On Thu, 29 Nov 2012 22:06:57 +0100
>>>> Petr Baudis <pasky at ucw.cz> wrote:
>>>>
>>>>> On Thu, Nov 29, 2012 at 08:35:30AM +0100, yac wrote:
>>>>>> On Wed, 28 Nov 2012 18:24:43 +0100
>>>>>> Mgr. Martin ?ember <zember at gmail.com> wrote:
>>>>>>
>>>>>>> Ahoj,
>>>>>>> nem?te niekto na predaj server, alebo neviete o takom?
>>>>>>>
>>>>>>> Vy?adovan? HW podpora virtualiz?cie, maj? na tom be?a? 1-6
>>>>>>> virtu?lnych strojov.
>>>>>>> V pr?pade pou?it?ho HW, cena do 8000K?...
>>>>>>>
>>>>>>> Do brm-racku :-)
>>>>>>>
>>>>>>> M?
>>>>>>
>>>>>> Za 8k takovouhle vec koupis novou
>>>>>
>>>>> Holy motherboard, CPU, RAM a PSU asi ano, disk uz nevim jestli do toho
>>>>> nacpes.  Ale s rackovovou chassis? Link or it didn't happen. :)
>>>>>
>>>>> 				Petr "Pasky" Baudis
>>>>> _______________________________________________
>>>>> Brmlab mailing list
>>>>> Brmlab at brmlab.cz
>>>>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>>>
>>>> http://www.alza.cz/gigabyte-970a-ds3-d308659.htm
>>>> http://www.alza.cz/sapphire-hd-5450-d154355.htm
>>>> http://www.alza.cz/amd-phenom-ii-x4-965-black-edition-d145518.htm
>>>> http://www.alza.cz/corsair-8gb-kit-ddr3-1600mhz-cl11-d357016.htm
>>>> http://www.alza.cz/fortron-ax400-60apn-350w-d126404.htm
>>>> 6200,-
>>>
>>> Jiste. I kdyz osobne bych volil radeji
>>>
>>> http://www.alza.cz/gigabyte-a75m-ds2-d359304.htm
>>> http://www.alza.cz/amd-a6-x4-3670-d284911.htm
>>>
>>> a dropnul zvlast grafickou kartu.
>>>
>>>> Do toho se disk prida bez problemu. Skrin nepotrebuju, neznam, neresim.
>>>
>>> No pouzit misto skrine krabici od club mate je z mnoha ohledu
>>> dost problematicke, chassis mi prijde jako jeden z nejklicovejsich
>>> atributu serveru. Na druhou stranu sehnat pouzitou chassis by nemel
>>> byt tak velky problem, a hlavne i nove jsou mnohem levnejsi, nez
>>> jsem myslel (2100Kc):
>>>
>>> 	http://www.alza.cz/eurocase-ipc-1u-600-cerna-d243731.htm
>>>
>>> (Pozor, je tam nejaka sleva, ktera plati jen do 2.12.)
>>>
>>> V tu chvili beru, ze je asi nejrozumnejsi si to s rozpoctem 8kKc
>>> postavit sam z novych komponent - bude to mit rozhodne lepsi vykon
>>> a jeste na to bude zaruka.
>>>
>>> Jen nevim, kde do toho vzit matching zdroj.
>>>
>>> 				Petr "Pasky" Baudis
>>> _______________________________________________
>>> Brmlab mailing list
>>> Brmlab at brmlab.cz
>>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>>
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121202/5740f297/attachment.pgp>

From jeniks at kxt.cz  Sun Dec  2 00:52:45 2012
From: jeniks at kxt.cz (Jan Svec)
Date: Sun, 2 Dec 2012 00:52:45 +0100
Subject: [Brmlab] tech rider
In-Reply-To: <20121201130518.GC18378@machine.or.cz>
References: <20121121191259.GD18378@machine.or.cz>
	<50B10C54.2070104@fundamental.art.pl>
	<20121124191731.GH18378@machine.or.cz>
	<50B13253.7060503@fundamental.art.pl>
	<20121124210859.GK18378@machine.or.cz>
	<50B3CEEF.7060501@fundamental.art.pl>
	<20121126202508.GW18378@machine.or.cz>
	<50B9FADF.3060107@fundamental.art.pl>
	<20121201124735.GA18378@machine.or.cz>
	<50B9FD6A.4000507@fundamental.art.pl>
	<20121201130518.GC18378@machine.or.cz>
Message-ID: <E4AFE22C-36E2-45B1-8E0E-812B8FC603E4@kxt.cz>

Hi Robert, 

On Dec 1, 2012, at 2:05 PM, Petr Baudis <pasky at ucw.cz> wrote:

> On Sat, Dec 01, 2012 at 01:51:54PM +0100, Robert B. Lisek wrote:
>> I need some sound equipment for presentation:
>> 8-channel mixer, audio monitors, subwoofer, projector
>> do you have any?
> 
> Not sure if our main mixer has 6 or 8 channels, but we have some smaler
> ones too so hopefully we should be able to put that together. No idea
> what "audio monitor" is. We do have a subwoofer and projector.
> 
Yes, we have an 8 channel mixer. Do you really need quality monitor speakers in terms of tech specs, or 
just any speakers for monitoring? (Or maybe headphones?)

Cheers
Jan



From jeniks at kxt.cz  Sun Dec  2 12:26:39 2012
From: jeniks at kxt.cz (Jan Svec)
Date: Sun, 2 Dec 2012 12:26:39 +0100
Subject: [Brmlab] Fwd:  tech rider
References: <50BAA64E.2040301@fundamental.art.pl>
Message-ID: <35DDAD4A-41E0-46F6-83F6-008EA2B40846@kxt.cz>

Hi Robert,

I am a bit confused - do you mean mixing monitors to hear what goes to PA, or stage monitors for musicians to hear what the play?

btw the mixer has 4 channels with mic/inst inputs, the rest of channels has line level inputs only, is that sufficient?

Cheers
Jan


Begin forwarded message:

> From: "Robert B. Lisek" <lisek at fundamental.art.pl>
> Date: December 2, 2012, 1:52:30 GMT+01:00
> To: Jan Svec <jeniks at kxt.cz>
> Subject: Re: [Brmlab] tech rider
> 
> On 12-12-02 00:52, Jan Svec wrote:
>> Hi Robert,
>> 
>> 
>> Yes, we have an 8 channel mixer. Do you really need quality monitor speakers in terms of tech specs, or
>> just any speakers for monitoring? (Or maybe headphones?)
>> 
>> Cheers
>> Jan
> Hi Jan, thank you for rapid aswer
> Yes. we need 8 channel mixer and quality monitor speakers if possible
> because the sound is important in our presentation
> we = I + 2 assistant musicians
> a real time coding will be transformed to sound signal
> best
> rbl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121202/25558c9d/attachment.html>

From jeniks at kxt.cz  Sun Dec  2 12:30:05 2012
From: jeniks at kxt.cz (Jan Svec)
Date: Sun, 2 Dec 2012 12:30:05 +0100
Subject: [Brmlab] tech rider
In-Reply-To: <35DDAD4A-41E0-46F6-83F6-008EA2B40846@kxt.cz>
References: <50BAA64E.2040301@fundamental.art.pl>
	<35DDAD4A-41E0-46F6-83F6-008EA2B40846@kxt.cz>
Message-ID: <7630C2E1-AA17-4F48-B53E-FCF7C1D761F3@kxt.cz>

...or, do you want to use mixing monitors as a PA because of their detailed sound?

On Dec 2, 2012, at 12:26, Jan Svec <jeniks at kxt.cz> wrote:

> Hi Robert,
> 
> I am a bit confused - do you mean mixing monitors to hear what goes to PA, or stage monitors for musicians to hear what the play?
> 
> btw the mixer has 4 channels with mic/inst inputs, the rest of channels has line level inputs only, is that sufficient?
> 
> Cheers
> Jan
> 
> 
> Begin forwarded message:
> 
>> From: "Robert B. Lisek" <lisek at fundamental.art.pl>
>> Date: December 2, 2012, 1:52:30 GMT+01:00
>> To: Jan Svec <jeniks at kxt.cz>
>> Subject: Re: [Brmlab] tech rider
>> 
>> On 12-12-02 00:52, Jan Svec wrote:
>>> Hi Robert,
>>> 
>>> 
>>> Yes, we have an 8 channel mixer. Do you really need quality monitor speakers in terms of tech specs, or
>>> just any speakers for monitoring? (Or maybe headphones?)
>>> 
>>> Cheers
>>> Jan
>> Hi Jan, thank you for rapid aswer
>> Yes. we need 8 channel mixer and quality monitor speakers if possible
>> because the sound is important in our presentation
>> we = I + 2 assistant musicians
>> a real time coding will be transformed to sound signal
>> best
>> rbl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121202/3cb0ab77/attachment.html>

From chidori at emptytriangle.com  Sun Dec  2 21:42:46 2012
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Sun, 2 Dec 2012 21:42:46 +0100
Subject: [Brmlab] Fwd: Getting Started with the Nomadic Science Lab -
	Mutamorphosis, Prague
In-Reply-To: <CAJqmRhWm7sh_ZNvqtycRb7M5Wi1k4iyN86TD8=b9R=Nq6yGmLw@mail.gmail.com>
References: <CAJqmRhWm7sh_ZNvqtycRb7M5Wi1k4iyN86TD8=b9R=Nq6yGmLw@mail.gmail.com>
Message-ID: <CALaRYADBOGJvPC9kY72=6xcjGmbU+V4MSK5Xg7nXY6nCFXyceQ@mail.gmail.com>

Zdravim!
Chcela som len pripomenut akciu ktora prebieha tento tyzden v Prahe -
"Nomadic Science Lab - Mutamorphosis", blizssie info dolu :)

chido

---------- Forwarded message ----------
From: Marc Dusseiller <marc at dusseiller.ch>
Date: Sun, Dec 2, 2012 at 7:03 PM
Subject: Getting Started with the Nomadic Science Lab - Mutamorphosis, Prague
To: Denisa Kera <denisa.kera at gmail.com>
Cc: Pavel Sedlak <gm.sedlak at gmail.com>, Zackery Denfeld
<zackery at gmail.com>, Cathrine Kramer <cathrine.kramer at gmail.com>, Urs
Gaudenz <urs at gaudi.ch>, Brian Degger <brian.degger at gmail.com>, kinimod
?inham <dominik.mahnic at gmail.com>, Michal Kindernay
<michal.kindernay at gmail.com>, Radka Haneckova
<chidori at emptytriangle.com>, petrsourek <petrsourek at centrum.cz>,
Andrej Boleslavsky | CIANT <andrej.boleslavsky at ciant.cz>,
"roman.trochta at ciant.cz" <roman.trochta at ciant.cz>, insectual
<insectual at societyofalgorithm.org>, Maria Grade Godinho
<mariagradegodinho at gmail.com>, lissa at ucsc.edu, verena kuni
<verena at kuni.org>, Jennifer Willet <jswillet at gmail.com>, Spela Petric
<spelun at gmail.com>, robertina ?ebjani? <robertina.sebjanic at gmail.com>,
Sumugan Sivanesan <sumugan.sivanesan at gmail.com>, Tessa Zettel
<tessa at makeshift.com.au>


Dear friends,

as you all are somehow involved in our activities during mutamorphosis
2012, participating, collaborating, remote connecting, participating
at the panel, attracting, theoretizing, bullshiting etc, i send you a
warm welcome and hello from prague!

we finally arrived and are getting ready to get rolling with the
Nomadic Science Lab.
we'll be in Vzorkovna from tomorrow morning onwards, hacking, fooding,
chatting, brewing, arguing etc.

http://hackteria.org/wiki/index.php/MutaMorphosis:Nomadic_Science_Lab

http://hackteria.org/?p=1848

we will keep you all updated about what's going on these days, for
those who arrive later.
and feel free to cross post our links through fbook or other means.

all the best.... now out for food.
marc



-- 
http://chidori.or.cz
"I was twenty-five and too old to be unusual."    James Watson, The Double Helix


From noreply at brmlab.cz  Mon Dec  3 00:00:02 2012
From: noreply at brmlab.cz (noreply at brmlab.cz)
Date: Mon,  3 Dec 2012 00:00:02 +0100 (CET)
Subject: [Brmlab] Tydenni prehled udalosti / Weekly overview of events
Message-ID: <20121202230002.A89D5A0FD8@data.brm>

Udalosti v brmlabu tento tyden:
Events taking place in brmlab this week:

3.12.2012 - 7.12.2012 DIYbio and Open Biology in Prague - http://hackteria.org/wiki/index.php/MutaMorphosis:Nomadic_Science_Lab
5.12.2012 20:00 Cancelled: MFCS #4 - http://brmlab.cz/event/mfcs
6.12.2012 20:00 - http://brmlab.cz/event/lightning_talks
7.12.2012 18:00 2k6 - http://meetings.2600.cz/
7.12.2012 19:00 ERS - crawling hidden spaces - http://brmlab.cz/pipermail/brmlab/2012-November/005560.html

From denisa at nus.edu.sg  Sun Dec  2 18:33:07 2012
From: denisa at nus.edu.sg (Denisa Kera)
Date: Mon, 3 Dec 2012 01:33:07 +0800
Subject: [Brmlab] [Brmlab Announce] announcement
Message-ID: <0D94AE5D99CB944BA6A19A3ABB4B4C4D0187774E194F@MBX08.stf.nus.edu.sg>

Utery,  4.12 od 20:00 (?) kratka prezentace DIYbio & food hacking workshopu (nebo spis unconference) ve spolupraci s Brlmablem  http://hackteria.org/wiki/index.php/MutaMorphosis:Nomadic_Mobile_Labs soucast http://mutamorphosis.org/2012/ .  Pokud se k nam chcete pridat kazdy den jsem od 12:00 ve Vzorkovne, Bartolom?jsk? 13 !


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121203/14c2e4a3/attachment.html>
-------------- next part --------------
_______________________________________________
Announce mailing list
Announce at brmlab.cz
http://brmlab.cz/cgi-bin/mailman/listinfo/announce

From pasky at ucw.cz  Mon Dec  3 03:02:19 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 3 Dec 2012 03:02:19 +0100
Subject: [Brmlab] Tydenni prehled udalosti / Weekly overview of events
In-Reply-To: <20121202230002.A89D5A0FD8@data.brm>
References: <20121202230002.A89D5A0FD8@data.brm>
Message-ID: <20121203020219.GR8089@machine.or.cz>

On Mon, Dec 03, 2012 at 12:00:02AM +0100, noreply at brmlab.cz wrote:
> Udalosti v brmlabu tento tyden:
> Events taking place in brmlab this week:
> 
> 3.12.2012 - 7.12.2012 DIYbio and Open Biology in Prague - http://hackteria.org/wiki/index.php/MutaMorphosis:Nomadic_Science_Lab
> 5.12.2012 20:00 Cancelled: MFCS #4 - http://brmlab.cz/event/mfcs

Ve stredu bude misto MFCS brmsec session (diskusni krouzek zamereny na
security).

> 6.12.2012 20:00 - http://brmlab.cz/event/lightning_talks
> 7.12.2012 18:00 2k6 - http://meetings.2600.cz/
> 7.12.2012 19:00 ERS - crawling hidden spaces - http://brmlab.cz/pipermail/brmlab/2012-November/005560.html

-- 
				Petr "Pasky" Baudis
	For every complex problem there is an answer that is clear,
	simple, and wrong.  -- H. L. Mencken


From mybiiter at gmail.com  Mon Dec  3 13:06:46 2012
From: mybiiter at gmail.com (BIITER)
Date: Mon, 3 Dec 2012 13:06:46 +0100
Subject: [Brmlab] Tydenni prehled udalosti / Weekly overview of events
In-Reply-To: <20121203020219.GR8089@machine.or.cz>
References: <20121202230002.A89D5A0FD8@data.brm>
	<20121203020219.GR8089@machine.or.cz>
Message-ID: <CALE3YmEq394eGq3QF1987Nngybyyk527dj3eNeC3ooKxRMzAOA@mail.gmail.com>

On Mon, Dec 3, 2012 at 3:02 AM, Petr Baudis <pasky at ucw.cz> wrote:
> On Mon, Dec 03, 2012 at 12:00:02AM +0100, noreply at brmlab.cz wrote:
>> Udalosti v brmlabu tento tyden:
>> Events taking place in brmlab this week:
>>
>> 3.12.2012 - 7.12.2012 DIYbio and Open Biology in Prague - http://hackteria.org/wiki/index.php/MutaMorphosis:Nomadic_Science_Lab
>> 5.12.2012 20:00 Cancelled: MFCS #4 - http://brmlab.cz/event/mfcs
>
> Ve stredu bude misto MFCS brmsec session (diskusni krouzek zamereny na
> security).

Diskusni krouzek urcite ne.
http://c867995.r95.cf2.rackcdn.com/wp-content/uploads/2010/12/no-slackers-480.gif

Bude to akcni hyperkostka.
Nasetupujem server a sit na wargame. Potom budem wargamit.
Prubezne se pustime do vulnerability discovery a exploitovani.

>
>> 6.12.2012 20:00 - http://brmlab.cz/event/lightning_talks
>> 7.12.2012 18:00 2k6 - http://meetings.2600.cz/
>> 7.12.2012 19:00 ERS - crawling hidden spaces - http://brmlab.cz/pipermail/brmlab/2012-November/005560.html
>
> --
>                                 Petr "Pasky" Baudis
>         For every complex problem there is an answer that is clear,
>         simple, and wrong.  -- H. L. Mencken
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab

btr

From pasky at ucw.cz  Mon Dec  3 15:35:00 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 3 Dec 2012 15:35:00 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
In-Reply-To: <50787CDB.6040205@ruza.eu>
References: <f9ff77fb0189cdb324a4c083cdc107f4.squirrel@tvbgone.com>
	<50787CDB.6040205@ruza.eu>
Message-ID: <20121203143500.GS8089@machine.or.cz>

  Mili brmlabaci,

  pamatujte, ze pristi nedeli (16.12.) bude v Praze Mitch Altman poradat
pajeci workshop!

	https://brmlab.cz/event/mitch_altman_in_prague

  Je to uz za dvermi a potrebovali bychom pomoc dobrovolniku s pripravou
prostoru, zarizenim potrebnych veci (AA baterie, zajistit, aby bylo dost
pajecich stanic, atd.) a propagaci (vyrobit co nejdriv letacek, ktery
pak muzeme rozvesit na par mist, post na abclinuxu.cz, co to rozsirit do
radiokomunity? atd.). Bylo by skvele, kdyby se nekdo ujal koordinace
priprav a rozdelili jsme si to mezi sebou - at nema brmlab trapas, ze na
workshop prisli ctyri lidi. :-) V nouzi se koordinace mohu ujmout i ja,
nejsem na tom vsak tento a zejmena pristi tyden casove nijak ruzove.

  Seznam veci, ktere je potreba na workshop pripravit technicky,
najdeme na:

	https://www.noisebridge.net/wiki/MitchTripEU_Nov_Dec_2012#Requirements_of_the_hosting_spaces_for_Mitch.27s_workshops

  Happy organizing,

				Petr "Pasky" Baudis

From chidori at emptytriangle.com  Mon Dec  3 16:05:06 2012
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Mon, 3 Dec 2012 16:05:06 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
In-Reply-To: <20121203143500.GS8089@machine.or.cz>
References: <f9ff77fb0189cdb324a4c083cdc107f4.squirrel@tvbgone.com>
	<50787CDB.6040205@ruza.eu> <20121203143500.GS8089@machine.or.cz>
Message-ID: <CALaRYACW2g4hR9ggyLwn2Nos=Ws_q9pUOJgaAG4QUB8SrXiB0g@mail.gmail.com>

delam letak, ak mi niekto viete urobit QR kod na odkaz na ten event
budem vdacna, cim driv tim lip (rozumej hned :))
chcelo by to editovat tu stranku
https://brmlab.cz/event/mitch_altman_in_prague, dat tam blizssie info
o Mitchovi http://en.wikipedia.org/wiki/Mitch_Altman , napisat tam
presny datum konania, mozno odkaz na fotky z minuleho workshopu
http://www.flickr.com/photos/maltman23/sets/72157624872434733
https://plus.google.com/photos/115401880503838928078/albums/5518258507273088689?banner=pwa
http://blackhead.cz/gallery/gall.php?galid=18
http://gallery.johny.sk/mitch
ja vyrabat letak a sucastne editovat stranku nestiham :)

chido

2012/12/3 Petr Baudis <pasky at ucw.cz>:
>   Mili brmlabaci,
>
>   pamatujte, ze pristi nedeli (16.12.) bude v Praze Mitch Altman poradat
> pajeci workshop!
>
>         https://brmlab.cz/event/mitch_altman_in_prague
>
>   Je to uz za dvermi a potrebovali bychom pomoc dobrovolniku s pripravou
> prostoru, zarizenim potrebnych veci (AA baterie, zajistit, aby bylo dost
> pajecich stanic, atd.) a propagaci (vyrobit co nejdriv letacek, ktery
> pak muzeme rozvesit na par mist, post na abclinuxu.cz, co to rozsirit do
> radiokomunity? atd.). Bylo by skvele, kdyby se nekdo ujal koordinace
> priprav a rozdelili jsme si to mezi sebou - at nema brmlab trapas, ze na
> workshop prisli ctyri lidi. :-) V nouzi se koordinace mohu ujmout i ja,
> nejsem na tom vsak tento a zejmena pristi tyden casove nijak ruzove.
>
>   Seznam veci, ktere je potreba na workshop pripravit technicky,
> najdeme na:
>
>         https://www.noisebridge.net/wiki/MitchTripEU_Nov_Dec_2012#Requirements_of_the_hosting_spaces_for_Mitch.27s_workshops
>
>   Happy organizing,
>
>                                 Petr "Pasky" Baudis
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab



-- 
http://chidori.or.cz
"I was twenty-five and too old to be unusual."    James Watson, The Double Helix

From pasky at ucw.cz  Mon Dec  3 19:19:42 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 3 Dec 2012 19:19:42 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
In-Reply-To: <CALaRYACW2g4hR9ggyLwn2Nos=Ws_q9pUOJgaAG4QUB8SrXiB0g@mail.gmail.com>
References: <f9ff77fb0189cdb324a4c083cdc107f4.squirrel@tvbgone.com>
	<50787CDB.6040205@ruza.eu> <20121203143500.GS8089@machine.or.cz>
	<CALaRYACW2g4hR9ggyLwn2Nos=Ws_q9pUOJgaAG4QUB8SrXiB0g@mail.gmail.com>
Message-ID: <20121203181942.GT8089@machine.or.cz>

  Ahoj!

  Plakat uz je ready a je na wiki strance, kterou jsem trochu prepsal
a zalozil doodle pro registraci ucastniku. Pokud si plakat vytisknete
a vyvesite na miste, kde si toho vsimnou potencialni zajemci, bude to
super; jinak zkusime zitra nebo ve stredu do brmlabu dopravit erarni.

  Stale hledame dobrovolniky pro technickou pripravu workshopu - hlavne
zajisteni vsech supplies dle

	https://www.noisebridge.net/wiki/MitchTripEU_Nov_Dec_2012#Requirements_of_the_hosting_spaces_for_Mitch.27s_workshops

(financovani dohodneme, nechceme, abyste to platili jen ze sveho).

				Petr "Pasky" Baudis

From axtheb at gmail.com  Tue Dec  4 13:35:38 2012
From: axtheb at gmail.com (=?UTF-8?B?VsOhY2xhdiAnQXgnIEjFr2xh?=)
Date: Tue, 4 Dec 2012 13:35:38 +0100
Subject: [Brmlab] =?utf-8?q?Zh=C3=A1=C5=88ame_server_do_brmlabu?=
In-Reply-To: <50BA3FB2.40503@hrach.eu>
References: <CAAO3Qb6yuYWLwbQ5GG+NxB=25La8CS6QsEySRxcEjD_Fy=RLdA@mail.gmail.com>
	<20121129083530.42312a7f@sam.yac> <20121129210656.GN8089@machine.or.cz>
	<20121129225231.7a6d3055@sam.yac> <20121129225122.GO8089@machine.or.cz>
	<50B88036.7050106@hysteria.cz> <50B88608.7010005@hysteria.cz>
	<522923936-1354276498-cardhu_decombobulator_blackberry.rim.net-280514012-@b4.c4.bise7.blackberry>
	<50BA3FB2.40503@hrach.eu>
Message-ID: <CAFfS25d=o7eNAHLeM9h-63MJpux1MNBiyTfJW4z0W76v4XeVzA@mail.gmail.com>

Pokud ten stroj bude bezet porad, daly by se vyhazet streva z brmka a
nastrkat ty veci tam, a bezet brmko ve virtualu?

Ax


2012/12/1 Jan Hrach <jenda at hrach.eu>

> https://www.abclinuxu.cz/bazar/show/369424
> M?lo RAM a kdo v?, jestli to m? virtualizaci.
>
> Jinak kdy? se pod?v?te do brmracku, uvid?te, ?e nen? probl?m narvat tam
> je?t? jeden tower, tak?e nen? pot?eba rackov? sk??? ;)
>
> V brmvidu jsou voln? disky 2x160 GB, p??padn? se d? p?es s?? p?ipojit z
> datastroje ten p?titerov? RAID, n?kde se tam v?l? m?j funk?n? zdroj (350 W)
> a n?jak? grafiky (do serveru bohat? dosta?uj?c?), tak?e i na tom by ?lo
> ?et?it.
>
> On 30.11.2012 12:54, rainbof at gmail.com wrote:
> > Na abclinuxu je nejaky u server. Mozna dokonce za odvoz. Nejspis ucko.
> > odeslano z blackberry 9900 (iphone sucks)
> >
> > -----Original Message-----
> > From: caha <caha at hysteria.cz>
> > Sender: brmlab-bounces at brmlab.cz
> > Date: Fri, 30 Nov 2012 11:10:16
> > To: <brmlab at brmlab.cz>
> > Reply-To: "Brmlab: Hackerspace Prague \(main discussion\)" <
> brmlab at brmlab.cz>
> > Subject: Re: [Brmlab] Zh??ame server do brmlabu
> >
> > aha, ona by mela bejt prej rackova, tak upresnuji ze bohuzel pouze
> > normalni PCckove
> >
> > caha napsal(a):
> >> bednu rozhodne nekupujte, skoda penez. Mame jich mraky (tech beden ;o) )
> >> a radi venujeme ...
> >>
> >> caha
> >>
> >> Petr Baudis napsal(a):
> >>> On Thu, Nov 29, 2012 at 10:52:31PM +0100, yac wrote:
> >>>> On Thu, 29 Nov 2012 22:06:57 +0100
> >>>> Petr Baudis <pasky at ucw.cz> wrote:
> >>>>
> >>>>> On Thu, Nov 29, 2012 at 08:35:30AM +0100, yac wrote:
> >>>>>> On Wed, 28 Nov 2012 18:24:43 +0100
> >>>>>> Mgr. Martin ?ember <zember at gmail.com> wrote:
> >>>>>>
> >>>>>>> Ahoj,
> >>>>>>> nem?te niekto na predaj server, alebo neviete o takom?
> >>>>>>>
> >>>>>>> Vy?adovan? HW podpora virtualiz?cie, maj? na tom be?a? 1-6
> >>>>>>> virtu?lnych strojov.
> >>>>>>> V pr?pade pou?it?ho HW, cena do 8000K?...
> >>>>>>>
> >>>>>>> Do brm-racku :-)
> >>>>>>>
> >>>>>>> M?
> >>>>>>
> >>>>>> Za 8k takovouhle vec koupis novou
> >>>>>
> >>>>> Holy motherboard, CPU, RAM a PSU asi ano, disk uz nevim jestli do
> toho
> >>>>> nacpes.  Ale s rackovovou chassis? Link or it didn't happen. :)
> >>>>>
> >>>>>                           Petr "Pasky" Baudis
> >>>>> _______________________________________________
> >>>>> Brmlab mailing list
> >>>>> Brmlab at brmlab.cz
> >>>>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> >>>>
> >>>> http://www.alza.cz/gigabyte-970a-ds3-d308659.htm
> >>>> http://www.alza.cz/sapphire-hd-5450-d154355.htm
> >>>> http://www.alza.cz/amd-phenom-ii-x4-965-black-edition-d145518.htm
> >>>> http://www.alza.cz/corsair-8gb-kit-ddr3-1600mhz-cl11-d357016.htm
> >>>> http://www.alza.cz/fortron-ax400-60apn-350w-d126404.htm
> >>>> 6200,-
> >>>
> >>> Jiste. I kdyz osobne bych volil radeji
> >>>
> >>> http://www.alza.cz/gigabyte-a75m-ds2-d359304.htm
> >>> http://www.alza.cz/amd-a6-x4-3670-d284911.htm
> >>>
> >>> a dropnul zvlast grafickou kartu.
> >>>
> >>>> Do toho se disk prida bez problemu. Skrin nepotrebuju, neznam,
> neresim.
> >>>
> >>> No pouzit misto skrine krabici od club mate je z mnoha ohledu
> >>> dost problematicke, chassis mi prijde jako jeden z nejklicovejsich
> >>> atributu serveru. Na druhou stranu sehnat pouzitou chassis by nemel
> >>> byt tak velky problem, a hlavne i nove jsou mnohem levnejsi, nez
> >>> jsem myslel (2100Kc):
> >>>
> >>>     http://www.alza.cz/eurocase-ipc-1u-600-cerna-d243731.htm
> >>>
> >>> (Pozor, je tam nejaka sleva, ktera plati jen do 2.12.)
> >>>
> >>> V tu chvili beru, ze je asi nejrozumnejsi si to s rozpoctem 8kKc
> >>> postavit sam z novych komponent - bude to mit rozhodne lepsi vykon
> >>> a jeste na to bude zaruka.
> >>>
> >>> Jen nevim, kde do toho vzit matching zdroj.
> >>>
> >>>                             Petr "Pasky" Baudis
> >>> _______________________________________________
> >>> Brmlab mailing list
> >>> Brmlab at brmlab.cz
> >>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> >>>
> >>
> >> _______________________________________________
> >> Brmlab mailing list
> >> Brmlab at brmlab.cz
> >> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> >>
> >
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>
> --
> Jan Hrach, http://jenda.hrach.eu/
> GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121204/77fcaed6/attachment.html>

From ruza at ruza.eu  Tue Dec  4 13:51:35 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Tue, 04 Dec 2012 13:51:35 +0100
Subject: [Brmlab] =?utf-8?q?Zh=C3=A1=C5=88ame_server_do_brmlabu?=
In-Reply-To: <CAFfS25d=o7eNAHLeM9h-63MJpux1MNBiyTfJW4z0W76v4XeVzA@mail.gmail.com>
References: <CAAO3Qb6yuYWLwbQ5GG+NxB=25La8CS6QsEySRxcEjD_Fy=RLdA@mail.gmail.com>
	<20121129083530.42312a7f@sam.yac>
	<20121129210656.GN8089@machine.or.cz>
	<20121129225231.7a6d3055@sam.yac>
	<20121129225122.GO8089@machine.or.cz>
	<50B88036.7050106@hysteria.cz> <50B88608.7010005@hysteria.cz>
	<522923936-1354276498-cardhu_decombobulator_blackberry.rim.net-280514012-@b4.c4.bise7.blackberry>
	<50BA3FB2.40503@hrach.eu>
	<CAFfS25d=o7eNAHLeM9h-63MJpux1MNBiyTfJW4z0W76v4XeVzA@mail.gmail.com>
Message-ID: <50BDF1D7.4060908@ruza.eu>

imo by to slo

On 12/04/2012 01:35 PM, V?clav 'Ax' H?la wrote:
> Pokud ten stroj bude bezet porad, daly by se vyhazet streva z brmka a
> nastrkat ty veci tam, a bezet brmko ve virtualu?
> 
> Ax

From klokanek at eldar.cz  Tue Dec  4 18:50:19 2012
From: klokanek at eldar.cz (Honza Klokanek Sipek)
Date: Tue, 4 Dec 2012 18:50:19 +0100
Subject: [Brmlab] pod kontrolou - clanek?
Message-ID: <20121204175019.GA38129@eldar.cz>

Ahoj, 
ctrnactidenik A2 (http://www.advojka.cz/) chysta na zacatek pristiho roku
tematicke cislo "Pod kontrolou". Budeme tam mit se Shaddackem  nejaky texty
("Jeden den pod kontrolou" o aspektech seldovani v kazdodennim zivote), ale
redakce hleda jeste dalsi texty k tematu. 

Treba internetovy aktivismus a snaha ho potlacit. 
Nebo datamining v bankach. 

Kdybyste chtel nekdo neco napsat, nebo vedel o vhodnem autorovi, napiste mi
prosim mail. 

diky a na videnou nekdy

klo


-- 
<(o)>..klokanek...............................................................  
     (honza sipek) * klokanek (zavinac) eldar.cz * ICQ#281 154 266
        skype: brouci.tykadylko  jabber: klokanek (zavinac) jabber.cz
                 	tel.: +420 776 817 817 
..................................... . ..        ..   . .  
Zasek do zivyho (kniha) ----- ------> http://eldar.cz/kangaroo/zasek_do_zivyho



From jenda at hrach.eu  Wed Dec  5 02:32:53 2012
From: jenda at hrach.eu (Jan Hrach)
Date: Wed, 05 Dec 2012 02:32:53 +0100
Subject: [Brmlab] =?utf-8?q?Zh=C3=A1=C5=88ame_server_do_brmlabu?=
In-Reply-To: <50BDF1D7.4060908@ruza.eu>
References: <CAAO3Qb6yuYWLwbQ5GG+NxB=25La8CS6QsEySRxcEjD_Fy=RLdA@mail.gmail.com>
	<20121129083530.42312a7f@sam.yac>
	<20121129210656.GN8089@machine.or.cz>
	<20121129225231.7a6d3055@sam.yac>
	<20121129225122.GO8089@machine.or.cz>
	<50B88036.7050106@hysteria.cz> <50B88608.7010005@hysteria.cz>
	<522923936-1354276498-cardhu_decombobulator_blackberry.rim.net-280514012-@b4.c4.bise7.blackberry>
	<50BA3FB2.40503@hrach.eu>
	<CAFfS25d=o7eNAHLeM9h-63MJpux1MNBiyTfJW4z0W76v4XeVzA@mail.gmail.com>
	<50BDF1D7.4060908@ruza.eu>
Message-ID: <50BEA445.1010601@hrach.eu>

Ne??kalo se, ?e na brmku b??? d?le?it? infrastruktura a proto tam ani nemaj? b??n? brmlab?ci (leg?ln? :) p??stup?

On 4.12.2012 13:51, Pavel Ruzicka wrote:
> imo by to slo
> 
> On 12/04/2012 01:35 PM, V?clav 'Ax' H?la wrote:
>> Pokud ten stroj bude bezet porad, daly by se vyhazet streva z brmka a
>> nastrkat ty veci tam, a bezet brmko ve virtualu?
>>
>> Ax
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536

------------- dal?? ??st ---------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121205/aeea0221/attachment.pgp>

From ruza at ruza.eu  Wed Dec  5 08:52:13 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Wed, 05 Dec 2012 08:52:13 +0100
Subject: [Brmlab] =?utf-8?q?Zh=C3=A1=C5=88ame_server_do_brmlabu?=
In-Reply-To: <50BEA445.1010601@hrach.eu>
References: <CAAO3Qb6yuYWLwbQ5GG+NxB=25La8CS6QsEySRxcEjD_Fy=RLdA@mail.gmail.com>
	<20121129083530.42312a7f@sam.yac>
	<20121129210656.GN8089@machine.or.cz>
	<20121129225231.7a6d3055@sam.yac>
	<20121129225122.GO8089@machine.or.cz>
	<50B88036.7050106@hysteria.cz> <50B88608.7010005@hysteria.cz>
	<522923936-1354276498-cardhu_decombobulator_blackberry.rim.net-280514012-@b4.c4.bise7.blackberry>
	<50BA3FB2.40503@hrach.eu>
	<CAFfS25d=o7eNAHLeM9h-63MJpux1MNBiyTfJW4z0W76v4XeVzA@mail.gmail.com>
	<50BDF1D7.4060908@ruza.eu> <50BEA445.1010601@hrach.eu>
Message-ID: <50BEFD2D.7010800@ruza.eu>

a tak to i zustane. fyzicky to nutne byt oddelene imo nemusi a jestli
nekdo se nekomu podari skakat mezi virtualama tak mu poblahopreju k
uspesnemu ulovku. sme prece hackerspace :)

On 12/05/2012 02:32 AM, Jan Hrach wrote:
> Ne??kalo se, ?e na brmku b??? d?le?it? infrastruktura a proto tam
> ani nemaj? b??n? brmlab?ci (leg?ln? :) p??stup?


-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz

From evendas at krazer.com.br  Tue Dec  4 00:37:52 2012
From: evendas at krazer.com.br (Vendas Krazer Technologies)
Date: Mon, 03 Dec 2012 21:37:52 -0200
Subject: [Brmlab] =?utf-8?q?Nova_CPE_Krazer_Sky_Station_5GHz_N_-_CPE_Anten?=
	=?utf-8?q?a_Integrada_de_18dBi_e_Com_Sa=C3=ADda_para_Antena_Extern?=
	=?utf-8?q?a?=
Message-ID: <73120090.1CDD19E@krazer>

Lan?amento

CPE Krazer Sky Station 5GHz N

Voc? cliente pediu que a Krazer fizesse uma nova CPE num formato mais estiloso, pequena, de menor tamanho e que tivesse novas funcionabilidade, mais especificamente acesso f?cil ao bot?o de reset, prote??o contra queima e a t?o desejada SA?DA PARA ANTENA EXTERNA!!!

R$ 179.90



Antena Integrada de 18dBi 60?

Duas Portas de Rede Lan e Wan

PA Real de 630mW e LNA Ultra Ganho
PoE Passivo com Prote??o Dupla de 12 a 24V
Fonte Chaveada 12V Full Range 110 a 220V
Exclusiva Sa?da para Antena Externa

Homologa??o Anatel 0269-11-5280

Instala??o R?pida e Simples.
Software Amigavel e em Portugu?s!
Suporte a PPPoE Wisp Cliente!
Controle de Banda!



Excelente sinal de recep??o!  Longa Dist?ncia!


Fa?a um teste em sua rede e compare com os concorrentes, muito mais sinal que UBNT, muito mais dados, transmiss?o de quase 90Mbps TCP/IP continuamente! Lat?ncia de rede de 1 a 5 ms com carga completa!

Contate-nos
Val Campos // Carla Maria // Eder Roberto

Email / MSN:
vendas at allearth.com.br


Vendas / SAC
(19) 3256-5557
(19) 3245-0708
www.krazer.com.br


Envio de Email n?o autorizado ? crime, n?o seja o vil?o da hist?ria! Email ? protegido sobre sigilo fiscal e federal. Lei Federal Brasil.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121203/56303e4a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cpe-krazer-station-5-n.jpeg
Type: image/jpeg
Size: 8183 bytes
Desc: not available
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121203/56303e4a/attachment-0001.jpeg>

From honzaburian at seznam.cz  Thu Dec  6 16:18:33 2012
From: honzaburian at seznam.cz (Jan Burian)
Date: Thu, 06 Dec 2012 16:18:33 +0100
Subject: [Brmlab] Prednaska Modelovani mozku
Message-ID: <50C0B749.5010801@seznam.cz>

Dobr? den, r?d bych V?s pozval na p?edn??ku:

SOU?ASN? METODY MODELOV?N? MOZKU

p?edn??? neurolog MUDr. Old?ich Vy?ata,
kter? se zab?v? klinickou prax? i matematick?mi modely mozku.

P?edn??ka se bude zab?vat modelov?n?m jednotliv?ch neuron?, biologick?ch 
neuronov?ch s?t?, bayesovsk?m modelov?n?m a realistick?mi modely 
lidsk?ho mozku.

P?edn??ka se kon? v p?tek 14.12. ve 12:45 v m?stnosti 309 Star? Budova 
na Vysok? ?kole ekonomick?, n?m. W. Churchilla, Praha 3.

Pros?m p?epo?lete informaci o p?edn??ce dal??m z?jemc?m.

D?kuji a t???m se na vid?nou,
Jan Burian

From hanka at sciencecafe.cz  Fri Dec  7 11:42:51 2012
From: hanka at sciencecafe.cz (=?utf-8?Q?Science=20Caf=C3=A9=20Czech=20Republic?=)
Date: Fri, 7 Dec 2012 10:42:51 +0000
Subject: [Brmlab] =?utf-8?q?Pozv=C3=A1nka_na_Science_Caf=C3=A9_Praha_/_s_A?=
	=?utf-8?b?bGXFoWVtIMWgcGnEjcOha2VtIG8gemVtxJt0xZllc2Vuw60=?=
Message-ID: <8e76bc706803a704ea9ef911c9e4587b220.20121207104246@mail50.us1.mcsv.net>

Science Caf?:
Dok??eme p?edpov?dat zem?t?esen??

Listopadov?m hostem Science Caf? bude

RNDr. Ale? ?pi??k, CSc. z Geofyzik?ln?ho ?stavu Akademie v?d

Dok??eme ur?it, kde a kdy dojde k dal??mu siln?mu zem?t?esen?? V Kalifornii, v Turecku nebo op?t v Indon?sii ?i Japonsku? Bude n?sleduj?c? siln? zem?t?esen? ni?iv?? I o tom bude ?e? na posledn?m leto?n?m pra?sk?m Science Caf?.

?ter? 11. prosince 2012 od 19:00 h
kav?rna Potrv? (Srbsk? 2, Praha 6, nedaleko Hrad?ansk?)
vstupn? dobrovoln?

Informace pro m?dia: Hana Valentov? (hanka at sciencecafe.cz)

Science Caf? podporuj?:

Nada?n? fond Karla Jane?ka (http://sciencecafe.us6.list-manage2.com/track/click?u=8e76bc706803a704ea9ef911c&id=9641ae4ca0&e=9e4587b220)
LukyLab (http://sciencecafe.us6.list-manage.com/track/click?u=8e76bc706803a704ea9ef911c&id=bbc42d9ed2&e=9e4587b220)
Horton International (http://sciencecafe.us6.list-manage.com/track/click?u=8e76bc706803a704ea9ef911c&id=cf868fb654&e=9e4587b220)
?esk? rozhlas Leonardo
Vesm?r (http://sciencecafe.us6.list-manage2.com/track/click?u=8e76bc706803a704ea9ef911c&id=4be9945276&e=9e4587b220)
Nakladatelstv? Academia (http://sciencecafe.us6.list-manage.com/track/click?u=8e76bc706803a704ea9ef911c&id=9f14766e50&e=9e4587b220)


============================================================
Po??d? Otev?r?me, o. s., organiz?tor diskusn?ch ve?er? Science Caf?.
www.sciencecafe.cz      info at sciencecafe.cz

Sent to brmlab at brmlab.cz ? why did I get this? (http://sciencecafe.us6.list-manage1.com/about?u=8e76bc706803a704ea9ef911c&id=f00a9c97b0&e=9e4587b220&c=f337451d2d)
unsubscribe from this list (http://sciencecafe.us6.list-manage.com/unsubscribe?u=8e76bc706803a704ea9ef911c&id=f00a9c97b0&e=9e4587b220&c=f337451d2d) | update subscription preferences (http://sciencecafe.us6.list-manage2.com/profile?u=8e76bc706803a704ea9ef911c&id=f00a9c97b0&e=9e4587b220)
Otev?r?me, o. s. ? Dobrovsk?ho 31 ? Praha 17000 Email Marketing Powered by MailChimp
http://www.mailchimp.com/monkey-rewards/?utm_source=freemium_newsletter&utm_medium=email&utm_campaign=monkey_rewards&aid=8e76bc706803a704ea9ef911c&afl=1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/fb478c0f/attachment-0001.html>

From caha at hysteria.cz  Fri Dec  7 12:50:00 2012
From: caha at hysteria.cz (caha)
Date: Fri, 07 Dec 2012 12:50:00 +0100
Subject: [Brmlab]
 =?utf-8?q?Pozv=C3=A1nka_na_Science_Caf=C3=A9_Praha_/_s_A?=
 =?utf-8?b?bGXFoWVtIMWgcGnEjcOha2VtIG8gemVtxJt0xZllc2Vuw60=?=
In-Reply-To: <8e76bc706803a704ea9ef911c9e4587b220.20121207104246@mail50.us1.mcsv.net>
References: <8e76bc706803a704ea9ef911c9e4587b220.20121207104246@mail50.us1.mcsv.net>
Message-ID: <50C1D7E8.6070707@hysteria.cz>

to je jak telepatie, zrovna jsem docetl tuhle knizku
http://www.cbdb.cz/kniha-3207-desaty-stupen-richter-10
vrele doporucuji :) ...

caha

From pasky at ucw.cz  Fri Dec  7 13:47:55 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Fri, 7 Dec 2012 13:47:55 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
In-Reply-To: <20121203181942.GT8089@machine.or.cz>
References: <f9ff77fb0189cdb324a4c083cdc107f4.squirrel@tvbgone.com>
	<50787CDB.6040205@ruza.eu> <20121203143500.GS8089@machine.or.cz>
	<CALaRYACW2g4hR9ggyLwn2Nos=Ws_q9pUOJgaAG4QUB8SrXiB0g@mail.gmail.com>
	<20121203181942.GT8089@machine.or.cz>
Message-ID: <20121207124755.GV8089@machine.or.cz>

  Ahoj!

On Mon, Dec 03, 2012 at 07:19:42PM +0100, Petr Baudis wrote:
>   Plakat uz je ready a je na wiki strance, kterou jsem trochu prepsal
> a zalozil doodle pro registraci ucastniku. Pokud si plakat vytisknete
> a vyvesite na miste, kde si toho vsimnou potencialni zajemci, bude to
> super; jinak zkusime zitra nebo ve stredu do brmlabu dopravit erarni.

  Rad bych poprosil o registraci v Doodle

	http://doodle.com/hgfnmspxa3sb3mhb

i brmlabaky, kteri se chteji zucastnit, nejen externi zajemce,
at vime, zda mame dost mista. Rekl bych, ze vic nez takovych 15 lidi
(rozprostrenych mezi obe mistnosti) uz se bude vmestnavat dost obtizne,
takze s registraci prilis nevahejte.

>   Stale hledame dobrovolniky pro technickou pripravu workshopu - hlavne
> zajisteni vsech supplies dle
> 
> 	https://www.noisebridge.net/wiki/MitchTripEU_Nov_Dec_2012#Requirements_of_the_hosting_spaces_for_Mitch.27s_workshops
> 
> (financovani dohodneme, nechceme, abyste to platili jen ze sveho).

  Toto stale plati, viz take brmlabi TODO list.  Mrkva uz provedl
inventuru (ted mame funkcnich 8 mikropajek, 3 trafopajky).

				Petr "Pasky" Baudis

From axtheb at gmail.com  Fri Dec  7 14:26:12 2012
From: axtheb at gmail.com (=?UTF-8?B?VsOhY2xhdiAnQXgnIEjFr2xh?=)
Date: Fri, 7 Dec 2012 14:26:12 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
In-Reply-To: <20121207124755.GV8089@machine.or.cz>
References: <f9ff77fb0189cdb324a4c083cdc107f4.squirrel@tvbgone.com>
	<50787CDB.6040205@ruza.eu> <20121203143500.GS8089@machine.or.cz>
	<CALaRYACW2g4hR9ggyLwn2Nos=Ws_q9pUOJgaAG4QUB8SrXiB0g@mail.gmail.com>
	<20121203181942.GT8089@machine.or.cz>
	<20121207124755.GV8089@machine.or.cz>
Message-ID: <CAFfS25c5vV8cm8EXcbqPFaZjfO0+z7g2XE1962P_Ln8w3NMpfQ@mail.gmail.com>

>   Toto stale plati, viz take brmlabi TODO list.  Mrkva uz provedl
> inventuru (ted mame funkcnich 8 mikropajek, 3 trafopajky).

Jednu funkcni modrou mikropajku mam doma ja, do akce ji vratim.
Ax
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/9a0883be/attachment.html>

From sysop at centrum.cz  Fri Dec  7 14:56:13 2012
From: sysop at centrum.cz (SysOp)
Date: Fri, 07 Dec 2012 14:56:13 +0100
Subject: [Brmlab] RTL-SDR
In-Reply-To: <50B2418D.6040201@centrum.cz>
References: <50B2418D.6040201@centrum.cz>
Message-ID: <50C1F57D.2030802@centrum.cz>

Tk karty dorazily, jsou k vyzvednuti v brmbaru v krabici nahore v
regalu, 350 Kc/kus nechavejte tamtez. Podle Mrkvy chodi lip nez ty co
jsou na stole v radiolabu :-)

SysOp.

On 11/25/12 17:04, SysOp wrote:
> Brm vsem!
> Budu hromadne kupovat TV karty pouzitelne s RTL-SDR -
> http://aukro.cz/dvb-t-usb-hd-fm-dab-dab-tuner-skladem-do-24-hod-i2811087211.html
> Jsou stejneho typu jako ty "cervene", ktere se uz brmlabu vyskytuji. Jestli se
> chcete nekdo pridat, ozvete se.
> 
> 
> SysOp.

From mrkva at mrkva.eu  Fri Dec  7 15:18:09 2012
From: mrkva at mrkva.eu (Radek Pilar)
Date: Fri, 07 Dec 2012 15:18:09 +0100
Subject: [Brmlab] RTL-SDR
In-Reply-To: <50C1F57D.2030802@centrum.cz>
References: <50B2418D.6040201@centrum.cz> <50C1F57D.2030802@centrum.cz>
Message-ID: <50C1FAA1.9050406@mrkva.eu>

Jo, proto?e podle Jendy jsem zkou?el zrovna dva vadn?. :D
Ozna?il jsem je.
On 7.12.2012 14:56, SysOp wrote:

> Tk karty dorazily, jsou k vyzvednuti v brmbaru v krabici nahore v
> regalu, 350 Kc/kus nechavejte tamtez. Podle Mrkvy chodi lip nez ty co
> jsou na stole v radiolabu :-)
> 
> SysOp.
> 
> On 11/25/12 17:04, SysOp wrote:
>> Brm vsem!
>> Budu hromadne kupovat TV karty pouzitelne s RTL-SDR -
>> http://aukro.cz/dvb-t-usb-hd-fm-dab-dab-tuner-skladem-do-24-hod-i2811087211.html
>> Jsou stejneho typu jako ty "cervene", ktere se uz brmlabu vyskytuji. Jestli se
>> chcete nekdo pridat, ozvete se.
>>
>>
>> SysOp.
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


------------- dal?? ??st ---------------
A non-text attachment was scrubbed...
Name: 0xE60DBF0D.asc
Type: application/pgp-keys
Size: 6452 bytes
Desc: [??dn? popis nen? k dispozici]
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/a965d8b1/attachment.key>
------------- dal?? ??st ---------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 900 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/a965d8b1/attachment.pgp>

From ruza at ruza.eu  Fri Dec  7 19:08:47 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Fri, 07 Dec 2012 19:08:47 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
Message-ID: <50C230AF.90307@ruza.eu>

Ahojte brmlabaci,

tato vyzva se tyka predevsim nasich clenu.

Dostala se ke mne zprava, ze s velkou pravdepodobnosti budeme mit v
brzke dobe moznost nakoupit nejake vybaveni do brmlabu za vetsi sumu
penez (radove x set tisic).

Ne pocitace, ale spise merici/pajeci technika, ktera bude umistena k
pouziti v brmlabu. Nakup bude treba uskutecnit do konce tohoto
kalendarniho roku a musi se jednat o veci ke kterym lze mit danovy
doklad do jednoho az dvou dnu (tj nejlepe veci ktere jsou skladem).

Potrebujem sesbirat konkretni napady a to pokud mozno obratem.

Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
prodiskutujeme na meetupu.

-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz

From jeniks at kxt.cz  Fri Dec  7 19:33:39 2012
From: jeniks at kxt.cz (Jan Svec)
Date: Fri, 7 Dec 2012 19:33:39 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <50C230AF.90307@ruza.eu>
References: <50C230AF.90307@ruza.eu>
Message-ID: <B7DFC916-2935-4ADC-84A5-4559D7EABDE5@kxt.cz>

Ted jsme s Ruzou a Biterem debatovali a par napadu:

- par laboratornich zdroju (na workshopy a at nejsme zavisi na tech troskach co mame :) - 5k/ks baj voko
- DOBRY radio transceiver (Kenwood, Yaesu) - kolem 100k
- mikroskop - cenu nevim (biolab, hackovani IC)
- napadla me presna CNC frezka, pro casting (odlevani), vrele doporucuju procist lcamtufuv web s clanky na toto tema:
	http://lcamtuf.coredump.cx/rstory/
	http://lcamtuf.coredump.cx/gcnc/
	cena kolem 400k :)
- laser cutter!!! (jako maji v metalabu, tusim ze za nej dali nejakych 250k)

Kermit


On Dec 7, 2012, at 7:08 PM, Pavel Ruzicka <ruza at ruza.eu> wrote:

> Ahojte brmlabaci,
> 
> tato vyzva se tyka predevsim nasich clenu.
> 
> Dostala se ke mne zprava, ze s velkou pravdepodobnosti budeme mit v
> brzke dobe moznost nakoupit nejake vybaveni do brmlabu za vetsi sumu
> penez (radove x set tisic).
> 
> Ne pocitace, ale spise merici/pajeci technika, ktera bude umistena k
> pouziti v brmlabu. Nakup bude treba uskutecnit do konce tohoto
> kalendarniho roku a musi se jednat o veci ke kterym lze mit danovy
> doklad do jednoho az dvou dnu (tj nejlepe veci ktere jsou skladem).
> 
> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
> 
> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
> prodiskutujeme na meetupu.
> 
> -- 
> e-mail:  ruza at ruza.eu
> www:   http://ruza.eu
>     http://brmlab.cz
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


From stevko at mail.ru  Fri Dec  7 19:49:15 2012
From: stevko at mail.ru (Stevko)
Date: Fri, 07 Dec 2012 19:49:15 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <B7DFC916-2935-4ADC-84A5-4559D7EABDE5@kxt.cz>
References: <50C230AF.90307@ruza.eu>
	<B7DFC916-2935-4ADC-84A5-4559D7EABDE5@kxt.cz>
Message-ID: <1354906155.16435.3.camel@napo>

Ak si spr?vne spom?nam, tak biolabu by sa hodil mraz?k (chido bu?
potvrd? alebo vyvr?ti) a ja si mysl?m, ?e nejak? plynov? kahan by sa
hodil (teraz m?me iba dvojplatni?ku na varenie, na olovo, na medovinu a
mo?no aj na in? veci).

Stevko

V Piatok, 7. december 2012 o 19:33 +0100, Jan Svec nap?sal(a):
> Ted jsme s Ruzou a Biterem debatovali a par napadu:
> 
> - par laboratornich zdroju (na workshopy a at nejsme zavisi na tech troskach co mame :) - 5k/ks baj voko
> - DOBRY radio transceiver (Kenwood, Yaesu) - kolem 100k
> - mikroskop - cenu nevim (biolab, hackovani IC)
> - napadla me presna CNC frezka, pro casting (odlevani), vrele doporucuju procist lcamtufuv web s clanky na toto tema:
> 	http://lcamtuf.coredump.cx/rstory/
> 	http://lcamtuf.coredump.cx/gcnc/
> 	cena kolem 400k :)
> - laser cutter!!! (jako maji v metalabu, tusim ze za nej dali nejakych 250k)
> 
> Kermit
> 
> 
> On Dec 7, 2012, at 7:08 PM, Pavel Ruzicka <ruza at ruza.eu> wrote:
> 
> > Ahojte brmlabaci,
> > 
> > tato vyzva se tyka predevsim nasich clenu.
> > 
> > Dostala se ke mne zprava, ze s velkou pravdepodobnosti budeme mit v
> > brzke dobe moznost nakoupit nejake vybaveni do brmlabu za vetsi sumu
> > penez (radove x set tisic).
> > 
> > Ne pocitace, ale spise merici/pajeci technika, ktera bude umistena k
> > pouziti v brmlabu. Nakup bude treba uskutecnit do konce tohoto
> > kalendarniho roku a musi se jednat o veci ke kterym lze mit danovy
> > doklad do jednoho az dvou dnu (tj nejlepe veci ktere jsou skladem).
> > 
> > Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
> > 
> > Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
> > prodiskutujeme na meetupu.
> > 
> > -- 
> > e-mail:  ruza at ruza.eu
> > www:   http://ruza.eu
> >     http://brmlab.cz
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> 



From chidori at emptytriangle.com  Fri Dec  7 19:53:19 2012
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Fri, 7 Dec 2012 19:53:19 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <1354906155.16435.3.camel@napo>
References: <50C230AF.90307@ruza.eu>
	<B7DFC916-2935-4ADC-84A5-4559D7EABDE5@kxt.cz>
	<1354906155.16435.3.camel@napo>
Message-ID: <CALaRYAC=JAsabXfyX=M=V8cG1i1uUYNthuzkk=azYEr=q8vhqQ@mail.gmail.com>

opticky mikroskop je uzasny napad.

2012/12/7 Stevko <stevko at mail.ru>:
> Ak si spr?vne spom?nam, tak biolabu by sa hodil mraz?k (chido bu?
> potvrd? alebo vyvr?ti) a ja si mysl?m,

potvrdzujem mrazak, maly ale vykonny.

> ?e nejak? plynov? kahan by sa
> hodil (teraz m?me iba dvojplatni?ku na varenie, na olovo, na medovinu a
> mo?no aj na in? veci).

s tymto suhlasim tiez, min. na sterilizaciu pri vysevani kolonii :)

> Stevko
>
> V Piatok, 7. december 2012 o 19:33 +0100, Jan Svec nap?sal(a):
>> Ted jsme s Ruzou a Biterem debatovali a par napadu:
>>
>> - par laboratornich zdroju (na workshopy a at nejsme zavisi na tech troskach co mame :) - 5k/ks baj voko
>> - DOBRY radio transceiver (Kenwood, Yaesu) - kolem 100k
>> - mikroskop - cenu nevim (biolab, hackovani IC)
>> - napadla me presna CNC frezka, pro casting (odlevani), vrele doporucuju procist lcamtufuv web s clanky na toto tema:
>>       http://lcamtuf.coredump.cx/rstory/
>>       http://lcamtuf.coredump.cx/gcnc/
>>       cena kolem 400k :)
>> - laser cutter!!! (jako maji v metalabu, tusim ze za nej dali nejakych 250k)
>>
>> Kermit
>>
>>
>> On Dec 7, 2012, at 7:08 PM, Pavel Ruzicka <ruza at ruza.eu> wrote:
>>
>> > Ahojte brmlabaci,
>> >
>> > tato vyzva se tyka predevsim nasich clenu.
>> >
>> > Dostala se ke mne zprava, ze s velkou pravdepodobnosti budeme mit v
>> > brzke dobe moznost nakoupit nejake vybaveni do brmlabu za vetsi sumu
>> > penez (radove x set tisic).
>> >
>> > Ne pocitace, ale spise merici/pajeci technika, ktera bude umistena k
>> > pouziti v brmlabu. Nakup bude treba uskutecnit do konce tohoto
>> > kalendarniho roku a musi se jednat o veci ke kterym lze mit danovy
>> > doklad do jednoho az dvou dnu (tj nejlepe veci ktere jsou skladem).
>> >
>> > Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
>> >
>> > Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
>> > prodiskutujeme na meetupu.
>> >
>> > --
>> > e-mail:  ruza at ruza.eu
>> > www:   http://ruza.eu
>> >     http://brmlab.cz
>> > _______________________________________________
>> > Brmlab mailing list
>> > Brmlab at brmlab.cz
>> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab



-- 
http://chidori.or.cz
"I was twenty-five and too old to be unusual."    James Watson, The Double Helix

From stick at gk2.sk  Fri Dec  7 19:56:14 2012
From: stick at gk2.sk (Pavol Rusnak)
Date: Fri, 07 Dec 2012 19:56:14 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <50C230AF.90307@ruza.eu>
References: <50C230AF.90307@ruza.eu>
Message-ID: <50C23BCE.9050008@gk2.sk>

On 07/12/12 19:08, Pavel Ruzicka wrote:
> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
> 
> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
> prodiskutujeme na meetupu.

Mozno by bolo fajn pisat konkretne napady na wiki (a tym konkretne
myslim s URL na shopy kde maju veci skladom).

Lebo takto tu budu ludia placat napady od buka do buka, co by bolo fajn
mat, ale uz nikto nespravi tu skutocnu robotu s hladanim ...

takze sup-sup editujte:

https://brmlab.cz/members/vanoce2012

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>

From jeniks at kxt.cz  Fri Dec  7 20:01:56 2012
From: jeniks at kxt.cz (Jan Svec)
Date: Fri, 7 Dec 2012 20:01:56 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <50C23BCE.9050008@gk2.sk>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
Message-ID: <C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>


On Dec 7, 2012, at 7:56 PM, Pavol Rusnak <stick at gk2.sk> wrote:

> On 07/12/12 19:08, Pavel Ruzicka wrote:
>> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
>> 
>> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
>> prodiskutujeme na meetupu.
> 
> Mozno by bolo fajn pisat konkretne napady na wiki (a tym konkretne
> myslim s URL na shopy kde maju veci skladom).
> 
> Lebo takto tu budu ludia placat napady od buka do buka, co by bolo fajn
> mat, ale uz nikto nespravi tu skutocnu robotu s hladanim ...
> 
> takze sup-sup editujte:
> 
> https://brmlab.cz/members/vanoce2012
> 

Super :)
Chido, muzes prosim navrhnout nejaky konkretni mikroskop?
Kappi, Specz, Ruza, TOmSuch - mate napad jaky transceiver a kde ho koupit? (elix?); a nesetrete, poradny delo :)
zdroje doplnim 
frezu doplnim, zatim navrh na Roland MDX 540 - 21k USD
laser cutter - nevim, v Metalabu maji Epilog Legend 36 EXT 60W, ale to asi nezaplatime. Jinak pro predstavu:
	http://www.production24.cz/technologie/lasery-epilog

Zitra nebo dnes vecer to prepisu do wiki.

Kermit



From chidori at emptytriangle.com  Fri Dec  7 20:14:40 2012
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Fri, 7 Dec 2012 20:14:40 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
Message-ID: <CALaRYADJdGcE-_xWTYVokmN8i0+xGO5HOFyuRcPrWvXqtcuiEQ@mail.gmail.com>

2012/12/7 Jan Svec <jeniks at kxt.cz>:
>
> On Dec 7, 2012, at 7:56 PM, Pavol Rusnak <stick at gk2.sk> wrote:
>
>> On 07/12/12 19:08, Pavel Ruzicka wrote:
>>> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
>>>
>>> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
>>> prodiskutujeme na meetupu.
>>
>> Mozno by bolo fajn pisat konkretne napady na wiki (a tym konkretne
>> myslim s URL na shopy kde maju veci skladom).
>>
>> Lebo takto tu budu ludia placat napady od buka do buka, co by bolo fajn
>> mat, ale uz nikto nespravi tu skutocnu robotu s hladanim ...
>>
>> takze sup-sup editujte:
>>
>> https://brmlab.cz/members/vanoce2012
>>
>
> Super :)
> Chido, muzes prosim navrhnout nejaky konkretni mikroskop?
> Kappi, Specz, Ruza, TOmSuch - mate napad jaky transceiver a kde ho koupit? (elix?); a nesetrete, poradny delo :)

mikroskop doplnen; je tam odkaz na katalog p-labu kde je u nej take
cena. doplnila jsem take specifikace mrazaku a dalsi (optional; veci
jako zdroje a mikroskop maji samozrejme prednost) polozky pro biolab.

> zdroje doplnim
> frezu doplnim, zatim navrh na Roland MDX 540 - 21k USD
> laser cutter - nevim, v Metalabu maji Epilog Legend 36 EXT 60W, ale to asi nezaplatime. Jinak pro predstavu:
>         http://www.production24.cz/technologie/lasery-epilog
>
> Zitra nebo dnes vecer to prepisu do wiki.
>
> Kermit
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab



-- 
http://chidori.or.cz
"I was twenty-five and too old to be unusual."    James Watson, The Double Helix

From juraj.saksun at gmail.com  Fri Dec  7 20:23:29 2012
From: juraj.saksun at gmail.com (Juraj Saksun)
Date: Fri, 7 Dec 2012 20:23:29 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <CALaRYADJdGcE-_xWTYVokmN8i0+xGO5HOFyuRcPrWvXqtcuiEQ@mail.gmail.com>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
	<CALaRYADJdGcE-_xWTYVokmN8i0+xGO5HOFyuRcPrWvXqtcuiEQ@mail.gmail.com>
Message-ID: <CADN3afD==WDRJ4xA1QPgtZPvmnvMKn6MOnnvLR3dCMVKpAr2CQ@mail.gmail.com>

Mal? CNC fr?za nebo CNC laser je dobr? n?pad. K nim by se mo?n? hodil
n?jak? 3D scanner :-)
Odkud jdou ty pen?ze? A pro? tak rychle doklad?
Je to docela ?koda, t?m?r jak?koliv v?t?? p??stroje/stroje vyjdou 2-5x dr??
v ?R a v?b?r oproti n?kupu ze zahrani?? k zaplak?n?...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/7af8863e/attachment.html>

From ruza at ruza.eu  Fri Dec  7 20:24:02 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Fri, 07 Dec 2012 20:24:02 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <CALaRYADJdGcE-_xWTYVokmN8i0+xGO5HOFyuRcPrWvXqtcuiEQ@mail.gmail.com>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
	<CALaRYADJdGcE-_xWTYVokmN8i0+xGO5HOFyuRcPrWvXqtcuiEQ@mail.gmail.com>
Message-ID: <50C24252.8070201@ruza.eu>

jo to je dalsi vec ze bysme pak vysledny sdeznam meli seradit podle
nejakych priorit. pripadne na te wiki piste co povazujete za dulezite a
co optional.

> mikroskop doplnen; je tam odkaz na katalog p-labu kde je u nej take
> cena. doplnila jsem take specifikace mrazaku a dalsi (optional; veci
> jako zdroje a mikroskop maji samozrejme prednost) polozky pro biolab.


-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz

From rainbof at gmail.com  Fri Dec  7 20:39:02 2012
From: rainbof at gmail.com (Ondrej Beranek)
Date: Fri, 7 Dec 2012 20:39:02 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <50C24252.8070201@ruza.eu>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
	<CALaRYADJdGcE-_xWTYVokmN8i0+xGO5HOFyuRcPrWvXqtcuiEQ@mail.gmail.com>
	<50C24252.8070201@ruza.eu>
Message-ID: <CAAEb_Q04mND+fZzTgSB2eCN--2uZsvpAdbu9u_NaVnCqjHa-Qg@mail.gmail.com>

mysl?m ?e bychom u?ili i infra p?jku, n?jak? vlastn? program?tory pro
atmely. army, epromky apod.

Dne 7. prosince 2012 20:24 Pavel Ruzicka <ruza at ruza.eu> napsal(a):
> jo to je dalsi vec ze bysme pak vysledny sdeznam meli seradit podle
> nejakych priorit. pripadne na te wiki piste co povazujete za dulezite a
> co optional.
>
>> mikroskop doplnen; je tam odkaz na katalog p-labu kde je u nej take
>> cena. doplnila jsem take specifikace mrazaku a dalsi (optional; veci
>> jako zdroje a mikroskop maji samozrejme prednost) polozky pro biolab.
>
>
> --
> e-mail:  ruza at ruza.eu
> www:   http://ruza.eu
>      http://brmlab.cz
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab

From jeniks at kxt.cz  Fri Dec  7 21:41:31 2012
From: jeniks at kxt.cz (Jan Svec)
Date: Fri, 7 Dec 2012 21:41:31 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <CAAEb_Q04mND+fZzTgSB2eCN--2uZsvpAdbu9u_NaVnCqjHa-Qg@mail.gmail.com>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
	<CALaRYADJdGcE-_xWTYVokmN8i0+xGO5HOFyuRcPrWvXqtcuiEQ@mail.gmail.com>
	<50C24252.8070201@ruza.eu>
	<CAAEb_Q04mND+fZzTgSB2eCN--2uZsvpAdbu9u_NaVnCqjHa-Qg@mail.gmail.com>
Message-ID: <02C93C73-1AB8-4371-9C96-B0478E28DCB2@kxt.cz>

Pis to tam, konkratne, s cenou a kde to koupit.

Dik

On Dec 7, 2012, at 8:39 PM, Ondrej Beranek <rainbof at gmail.com> wrote:

> mysl?m ?e bychom u?ili i infra p?jku, n?jak? vlastn? program?tory pro
> atmely. army, epromky apod.
> 
> Dne 7. prosince 2012 20:24 Pavel Ruzicka <ruza at ruza.eu> napsal(a):
>> jo to je dalsi vec ze bysme pak vysledny sdeznam meli seradit podle
>> nejakych priorit. pripadne na te wiki piste co povazujete za dulezite a
>> co optional.
>> 
>>> mikroskop doplnen; je tam odkaz na katalog p-labu kde je u nej take
>>> cena. doplnila jsem take specifikace mrazaku a dalsi (optional; veci
>>> jako zdroje a mikroskop maji samozrejme prednost) polozky pro biolab.
>> 
>> 
>> --
>> e-mail:  ruza at ruza.eu
>> www:   http://ruza.eu
>>     http://brmlab.cz
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


From info at kappi.cz  Fri Dec  7 23:16:26 2012
From: info at kappi.cz (Jan Kapoun)
Date: Fri, 07 Dec 2012 23:16:26 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
Message-ID: <50C26ABA.4030902@kappi.cz>

Yaesu 1000, bez debat. Elix nebo DDamtek (tam jsem ji dokonce snad i
videl nedavno na policce)

kappi


Dne 07.12.12 20:01, Jan Svec napsal(a):
> On Dec 7, 2012, at 7:56 PM, Pavol Rusnak <stick at gk2.sk> wrote:
>
>> On 07/12/12 19:08, Pavel Ruzicka wrote:
>>> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
>>>
>>> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
>>> prodiskutujeme na meetupu.
>> Mozno by bolo fajn pisat konkretne napady na wiki (a tym konkretne
>> myslim s URL na shopy kde maju veci skladom).
>>
>> Lebo takto tu budu ludia placat napady od buka do buka, co by bolo fajn
>> mat, ale uz nikto nespravi tu skutocnu robotu s hladanim ...
>>
>> takze sup-sup editujte:
>>
>> https://brmlab.cz/members/vanoce2012
>>
> Super :)
> Chido, muzes prosim navrhnout nejaky konkretni mikroskop?
> Kappi, Specz, Ruza, TOmSuch - mate napad jaky transceiver a kde ho koupit? (elix?); a nesetrete, poradny delo :)
> zdroje doplnim 
> frezu doplnim, zatim navrh na Roland MDX 540 - 21k USD
> laser cutter - nevim, v Metalabu maji Epilog Legend 36 EXT 60W, ale to asi nezaplatime. Jinak pro predstavu:
> 	http://www.production24.cz/technologie/lasery-epilog
>
> Zitra nebo dnes vecer to prepisu do wiki.
>
> Kermit
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3736 bytes
Desc: Elektronicky podpis S/MIME
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/df4d288b/attachment.bin>

From zdenek at hladik.cz  Fri Dec  7 23:18:11 2012
From: zdenek at hladik.cz (Zdenek Hladik)
Date: Fri, 07 Dec 2012 23:18:11 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
Message-ID: <50C26B23.1050205@hladik.cz>

Muzu donest dve mikropajky a treti ruku s lupou + drobnosti: 
2-3 adaptery 5V/2A,DSO QUAD oscilko, USB log. analyzator apod...

..at se nejak odvdecim za info/knowhow, ktere ac neclen z 
brmlabu nasavam. Jinak budu spis k ruce, takze na mou osobu 
nerezervujte pajeci pracoviste (ne ze bych teda nejak dobre 
pajet umel, ale ten keyer ac SMD mi kupodivu funguje.

BTW nestalo by za to poptat nejakou sponzorskou stavebnicku 
(jednodussi, aby se to stihlo spichnout na workshopu) od 
nejakeho prodejce (HWkitchen,PVelectronic,GME,GES,FLAJZAR, a 
pod.)?

Sam se muzu poptat OK1CDJ (viz hamnshop.cz) jestli by 
nevenoval nejakou stavebnicku radia, kdyz uz jsou v BRM 4 
HAMove....

Prinesu taky ukazat K3NG keyer a snad uz hotovy Softrock TCVR.

                               Drsnik
                               OK7DR

From info at kappi.cz  Fri Dec  7 23:40:26 2012
From: info at kappi.cz (Jan Kapoun)
Date: Fri, 07 Dec 2012 23:40:26 +0100
Subject: [Brmlab] Shanim 2,5" SATA HDD
Message-ID: <50C2705A.8080404@kappi.cz>

Ahoj, mel bych prosbu, nevali se nekomu doma 2,5" sata hdd funkcni s
libovolnou kapacitou, potreboval bych ho a nechce se mi pro mnou
zamysleny ucel kupovat novy nebo neovereny pouzity. Tak kdyby nahodou,
nahodte nejakou rozumnou castku a dohodnem se.
Diky

kappi

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3736 bytes
Desc: Elektronicky podpis S/MIME
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/4b8430e3/attachment.bin>

From stick at gk2.sk  Fri Dec  7 23:48:48 2012
From: stick at gk2.sk (Pavol Rusnak)
Date: Fri, 07 Dec 2012 23:48:48 +0100
Subject: [Brmlab] Shanim 2,5" SATA HDD
In-Reply-To: <50C2705A.8080404@kappi.cz>
References: <50C2705A.8080404@kappi.cz>
Message-ID: <50C27250.3080907@gk2.sk>

On 07/12/12 23:40, Jan Kapoun wrote:
> Ahoj, mel bych prosbu, nevali se nekomu doma 2,5" sata hdd funkcni s
> libovolnou kapacitou, potreboval bych ho a nechce se mi pro mnou
> zamysleny ucel kupovat novy nebo neovereny pouzity. Tak kdyby nahodou,
> nahodte nejakou rozumnou castku a dohodnem se.

Mam pocit ze pred casom som daval svoj 80 GB 2.5" disk zo stareho NTB do
skladu. Neni tam este?


-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>

From info at kappi.cz  Fri Dec  7 23:48:00 2012
From: info at kappi.cz (Jan Kapoun)
Date: Fri, 07 Dec 2012 23:48:00 +0100
Subject: [Brmlab] Shanim 2,5" SATA HDD
In-Reply-To: <50C27250.3080907@gk2.sk>
References: <50C2705A.8080404@kappi.cz> <50C27250.3080907@gk2.sk>
Message-ID: <50C27220.8050408@kappi.cz>


Dne 07.12.12 23:48, Pavol Rusnak napsal(a):
> On 07/12/12 23:40, Jan Kapoun wrote:
>> Ahoj, mel bych prosbu, nevali se nekomu doma 2,5" sata hdd funkcni s
>> libovolnou kapacitou, potreboval bych ho a nechce se mi pro mnou
>> zamysleny ucel kupovat novy nebo neovereny pouzity. Tak kdyby nahodou,
>> nahodte nejakou rozumnou castku a dohodnem se.
> Mam pocit ze pred casom som daval svoj 80 GB 2.5" disk zo stareho NTB do
> skladu. Neni tam este?
>
>
Dloouho jsem tam nebyl, takze nevim, ale podivam se, diky.

kappi

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3736 bytes
Desc: Elektronicky podpis S/MIME
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/d5c14ff7/attachment.bin>

From jenda at hrach.eu  Fri Dec  7 23:58:15 2012
From: jenda at hrach.eu (Jan Hrach)
Date: Fri, 07 Dec 2012 23:58:15 +0100
Subject: [Brmlab] =?utf-8?b?VsOhbm/EjW7DrSBEU1AgLSBvZGxlcHTDoXbDoW7DrSA=?=
 =?utf-8?b?xI1pcMWvIGEgbGlkc2vDvSBzbHVjaA==?=
Message-ID: <50C27487.40707@hrach.eu>

Ahoj,
dovolujeme si v?s pozvat na posledn? p?edn??ku p?ed koncem sv?ta, kter? se kon? ve ?tvrtek 20.12.2012 od 19:00 v prostor?ch nejmenovan?ho pra?sk?ho hackerspace.

Hovo?it bude Rostislav, kter? v 80. letech v Tesle d?lal debug ?ip? na bare-silicon ?rovni (odleptat, koukat, ??ourat), a potom j? a David Klus??ek o sluchu a jeho poruch?ch.

https://brmlab.cz/event/dsp#vanocni_dspposledni_prednaska_pred_koncem_sveta_20122012_1900


-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536

------------- dal?? ??st ---------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121207/aa068a81/attachment-0001.pgp>

From stick at gk2.sk  Sat Dec  8 00:04:53 2012
From: stick at gk2.sk (Pavol Rusnak)
Date: Sat, 08 Dec 2012 00:04:53 +0100
Subject: [Brmlab]
 =?utf-8?b?VsOhbm/EjW7DrSBEU1AgLSBvZGxlcHTDoXbDoW7DrSA=?=
 =?utf-8?b?xI1pcMWvIGEgbGlkc2vDvSBzbHVjaA==?=
In-Reply-To: <50C27487.40707@hrach.eu>
References: <50C27487.40707@hrach.eu>
Message-ID: <50C27615.3000608@gk2.sk>

On 07/12/12 23:58, Jan Hrach wrote:
> dovolujeme si v?s pozvat na posledn? p?edn??ku p?ed koncem sv?ta,
> kter? se kon? ve ?tvrtek 20.12.2012 od 19:00 v prostor?ch
> nejmenovan?ho pra?sk?ho hackerspace.

Program vyzera skvelo! Dufam, ze bude nahravany zaznam. :-)

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>

From klusacek at atrey.karlin.mff.cuni.cz  Sat Dec  8 00:54:19 2012
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 8 Dec 2012 00:54:19 +0100
Subject: [Brmlab]
	=?utf-8?b?VsOhbm/EjW7DrSBEU1AgLSBvZGxlcHTDoXbDoW7DrSA=?=
	=?utf-8?b?xI1pcMWvIGEgbGlkc2vDvSBzbHVjaA==?=
In-Reply-To: <50C27487.40707@hrach.eu>
References: <50C27487.40707@hrach.eu>
Message-ID: <20121207235419.GB28378@localhost.dummy.net>


> Hovo?it bude Rostislav, kter? v 80. letech v Tesle d?lal debug ?ip? na bare-silicon ?rovni (odleptat, koukat, ??ourat), a potom j? a David Klus??ek o sluchu a jeho poruch?ch.

Aaa, ted jsem si uvedomil ze vlastne jsi tam na zacatku nebyl kdyz jsem
Rostu poradstavoval a rikal cele jmeno. Takze je to Rostislav Wasyluk, 
kdybys to chtel opravit na Wiki.



From sargonout at gmail.com  Sat Dec  8 10:27:02 2012
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Sat, 8 Dec 2012 10:27:02 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <50C26ABA.4030902@kappi.cz>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
	<50C26ABA.4030902@kappi.cz>
Message-ID: <CAM1OxrgkRKMWXQM6doPzpAKbZ_Dw_CbuNtLRLi_AFeD_a74BJg@mail.gmail.com>

A co niekolkokrat uz spominane USRP ?

Sargon

Dne 7. prosince 2012 23:16 Jan Kapoun <info at kappi.cz> napsal(a):
> Yaesu 1000, bez debat. Elix nebo DDamtek (tam jsem ji dokonce snad i
> videl nedavno na policce)
>
> kappi
>
>
> Dne 07.12.12 20:01, Jan Svec napsal(a):
>> On Dec 7, 2012, at 7:56 PM, Pavol Rusnak <stick at gk2.sk> wrote:
>>
>>> On 07/12/12 19:08, Pavel Ruzicka wrote:
>>>> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
>>>>
>>>> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
>>>> prodiskutujeme na meetupu.
>>> Mozno by bolo fajn pisat konkretne napady na wiki (a tym konkretne
>>> myslim s URL na shopy kde maju veci skladom).
>>>
>>> Lebo takto tu budu ludia placat napady od buka do buka, co by bolo fajn
>>> mat, ale uz nikto nespravi tu skutocnu robotu s hladanim ...
>>>
>>> takze sup-sup editujte:
>>>
>>> https://brmlab.cz/members/vanoce2012
>>>
>> Super :)
>> Chido, muzes prosim navrhnout nejaky konkretni mikroskop?
>> Kappi, Specz, Ruza, TOmSuch - mate napad jaky transceiver a kde ho koupit? (elix?); a nesetrete, poradny delo :)
>> zdroje doplnim
>> frezu doplnim, zatim navrh na Roland MDX 540 - 21k USD
>> laser cutter - nevim, v Metalabu maji Epilog Legend 36 EXT 60W, ale to asi nezaplatime. Jinak pro predstavu:
>>       http://www.production24.cz/technologie/lasery-epilog
>>
>> Zitra nebo dnes vecer to prepisu do wiki.
>>
>> Kermit
>>
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>

From czestmyr at gmail.com  Sat Dec  8 13:01:45 2012
From: czestmyr at gmail.com (Cestmir Houska)
Date: Sat, 8 Dec 2012 13:01:45 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <CAM1OxrgkRKMWXQM6doPzpAKbZ_Dw_CbuNtLRLi_AFeD_a74BJg@mail.gmail.com>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
	<50C26ABA.4030902@kappi.cz>
	<CAM1OxrgkRKMWXQM6doPzpAKbZ_Dw_CbuNtLRLi_AFeD_a74BJg@mail.gmail.com>
Message-ID: <CAMiVEBMORQBdDW99U03HibF5x_r6ioqGVe6G=B4TZh3zpC4vRw@mail.gmail.com>

Nedavno jsem v Brmlabu videl nejakej DIY laser cutter a bylo mi
receno, ze je potreba tam koupit novej laser, takze co treba peknej
vykonnej laser misto celyho laser cutteru?

Cestmir

2012/12/8 Tomislav Arnaudov <sargonout at gmail.com>:
> A co niekolkokrat uz spominane USRP ?
>
> Sargon
>
> Dne 7. prosince 2012 23:16 Jan Kapoun <info at kappi.cz> napsal(a):
>> Yaesu 1000, bez debat. Elix nebo DDamtek (tam jsem ji dokonce snad i
>> videl nedavno na policce)
>>
>> kappi
>>
>>
>> Dne 07.12.12 20:01, Jan Svec napsal(a):
>>> On Dec 7, 2012, at 7:56 PM, Pavol Rusnak <stick at gk2.sk> wrote:
>>>
>>>> On 07/12/12 19:08, Pavel Ruzicka wrote:
>>>>> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
>>>>>
>>>>> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
>>>>> prodiskutujeme na meetupu.
>>>> Mozno by bolo fajn pisat konkretne napady na wiki (a tym konkretne
>>>> myslim s URL na shopy kde maju veci skladom).
>>>>
>>>> Lebo takto tu budu ludia placat napady od buka do buka, co by bolo fajn
>>>> mat, ale uz nikto nespravi tu skutocnu robotu s hladanim ...
>>>>
>>>> takze sup-sup editujte:
>>>>
>>>> https://brmlab.cz/members/vanoce2012
>>>>
>>> Super :)
>>> Chido, muzes prosim navrhnout nejaky konkretni mikroskop?
>>> Kappi, Specz, Ruza, TOmSuch - mate napad jaky transceiver a kde ho koupit? (elix?); a nesetrete, poradny delo :)
>>> zdroje doplnim
>>> frezu doplnim, zatim navrh na Roland MDX 540 - 21k USD
>>> laser cutter - nevim, v Metalabu maji Epilog Legend 36 EXT 60W, ale to asi nezaplatime. Jinak pro predstavu:
>>>       http://www.production24.cz/technologie/lasery-epilog
>>>
>>> Zitra nebo dnes vecer to prepisu do wiki.
>>>
>>> Kermit
>>>
>>>
>>> _______________________________________________
>>> Brmlab mailing list
>>> Brmlab at brmlab.cz
>>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>>
>>
>>
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab

From jenda at hrach.eu  Sat Dec  8 14:05:55 2012
From: jenda at hrach.eu (Jan Hrach)
Date: Sat, 08 Dec 2012 14:05:55 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <CAM1OxrgkRKMWXQM6doPzpAKbZ_Dw_CbuNtLRLi_AFeD_a74BJg@mail.gmail.com>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
	<50C26ABA.4030902@kappi.cz>
	<CAM1OxrgkRKMWXQM6doPzpAKbZ_Dw_CbuNtLRLi_AFeD_a74BJg@mail.gmail.com>
Message-ID: <50C33B33.3090900@hrach.eu>

U? jsem ho na tu wikistr?nku v?era psal.

On 8.12.2012 10:27, Tomislav Arnaudov wrote:
> A co niekolkokrat uz spominane USRP ?
> 
> Sargon
> 
> Dne 7. prosince 2012 23:16 Jan Kapoun <info at kappi.cz> napsal(a):
>> Yaesu 1000, bez debat. Elix nebo DDamtek (tam jsem ji dokonce snad i
>> videl nedavno na policce)
>>
>> kappi
>>
>>
>> Dne 07.12.12 20:01, Jan Svec napsal(a):
>>> On Dec 7, 2012, at 7:56 PM, Pavol Rusnak <stick at gk2.sk> wrote:
>>>
>>>> On 07/12/12 19:08, Pavel Ruzicka wrote:
>>>>> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
>>>>>
>>>>> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
>>>>> prodiskutujeme na meetupu.
>>>> Mozno by bolo fajn pisat konkretne napady na wiki (a tym konkretne
>>>> myslim s URL na shopy kde maju veci skladom).
>>>>
>>>> Lebo takto tu budu ludia placat napady od buka do buka, co by bolo fajn
>>>> mat, ale uz nikto nespravi tu skutocnu robotu s hladanim ...
>>>>
>>>> takze sup-sup editujte:
>>>>
>>>> https://brmlab.cz/members/vanoce2012
>>>>
>>> Super :)
>>> Chido, muzes prosim navrhnout nejaky konkretni mikroskop?
>>> Kappi, Specz, Ruza, TOmSuch - mate napad jaky transceiver a kde ho koupit? (elix?); a nesetrete, poradny delo :)
>>> zdroje doplnim
>>> frezu doplnim, zatim navrh na Roland MDX 540 - 21k USD
>>> laser cutter - nevim, v Metalabu maji Epilog Legend 36 EXT 60W, ale to asi nezaplatime. Jinak pro predstavu:
>>>       http://www.production24.cz/technologie/lasery-epilog
>>>
>>> Zitra nebo dnes vecer to prepisu do wiki.
>>>
>>> Kermit
>>>
>>>
>>> _______________________________________________
>>> Brmlab mailing list
>>> Brmlab at brmlab.cz
>>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>>
>>
>>
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> 

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536

------------- dal?? ??st ---------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121208/24a51761/attachment.pgp>

From axtheb at gmail.com  Sat Dec  8 14:14:10 2012
From: axtheb at gmail.com (=?UTF-8?B?VsOhY2xhdiAnQXgnIEjFr2xh?=)
Date: Sat, 8 Dec 2012 14:14:10 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu
In-Reply-To: <CAMiVEBMORQBdDW99U03HibF5x_r6ioqGVe6G=B4TZh3zpC4vRw@mail.gmail.com>
References: <50C230AF.90307@ruza.eu> <50C23BCE.9050008@gk2.sk>
	<C76F7BB8-4BF9-47CF-821C-44F3F5B5E7EB@kxt.cz>
	<50C26ABA.4030902@kappi.cz>
	<CAM1OxrgkRKMWXQM6doPzpAKbZ_Dw_CbuNtLRLi_AFeD_a74BJg@mail.gmail.com>
	<CAMiVEBMORQBdDW99U03HibF5x_r6ioqGVe6G=B4TZh3zpC4vRw@mail.gmail.com>
Message-ID: <CAFfS25crsm6mX4OD9XFakmV7Y5Jv6bn12OdxkxhJO+h3zKU_7g@mail.gmail.com>

Nasemu reprapu by se urcite libilo k vanocum tohle
http://www.pselectronic.cz/k5204-0705-zdroj-24v-20a-480w-sp-500-24.html(dal
sem to na wiki)

Ax


2012/12/8 Cestmir Houska <czestmyr at gmail.com>

> Nedavno jsem v Brmlabu videl nejakej DIY laser cutter a bylo mi
> receno, ze je potreba tam koupit novej laser, takze co treba peknej
> vykonnej laser misto celyho laser cutteru?
>
> Cestmir
>
> 2012/12/8 Tomislav Arnaudov <sargonout at gmail.com>:
> > A co niekolkokrat uz spominane USRP ?
> >
> > Sargon
> >
> > Dne 7. prosince 2012 23:16 Jan Kapoun <info at kappi.cz> napsal(a):
> >> Yaesu 1000, bez debat. Elix nebo DDamtek (tam jsem ji dokonce snad i
> >> videl nedavno na policce)
> >>
> >> kappi
> >>
> >>
> >> Dne 07.12.12 20:01, Jan Svec napsal(a):
> >>> On Dec 7, 2012, at 7:56 PM, Pavol Rusnak <stick at gk2.sk> wrote:
> >>>
> >>>> On 07/12/12 19:08, Pavel Ruzicka wrote:
> >>>>> Potrebujem sesbirat konkretni napady a to pokud mozno obratem.
> >>>>>
> >>>>> Piste tedy prosim bud do mailing listu nebo na Radu, pripadne jeste
> >>>>> prodiskutujeme na meetupu.
> >>>> Mozno by bolo fajn pisat konkretne napady na wiki (a tym konkretne
> >>>> myslim s URL na shopy kde maju veci skladom).
> >>>>
> >>>> Lebo takto tu budu ludia placat napady od buka do buka, co by bolo
> fajn
> >>>> mat, ale uz nikto nespravi tu skutocnu robotu s hladanim ...
> >>>>
> >>>> takze sup-sup editujte:
> >>>>
> >>>> https://brmlab.cz/members/vanoce2012
> >>>>
> >>> Super :)
> >>> Chido, muzes prosim navrhnout nejaky konkretni mikroskop?
> >>> Kappi, Specz, Ruza, TOmSuch - mate napad jaky transceiver a kde ho
> koupit? (elix?); a nesetrete, poradny delo :)
> >>> zdroje doplnim
> >>> frezu doplnim, zatim navrh na Roland MDX 540 - 21k USD
> >>> laser cutter - nevim, v Metalabu maji Epilog Legend 36 EXT 60W, ale to
> asi nezaplatime. Jinak pro predstavu:
> >>>       http://www.production24.cz/technologie/lasery-epilog
> >>>
> >>> Zitra nebo dnes vecer to prepisu do wiki.
> >>>
> >>> Kermit
> >>>
> >>>
> >>> _______________________________________________
> >>> Brmlab mailing list
> >>> Brmlab at brmlab.cz
> >>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> >>>
> >>
> >>
> >>
> >> _______________________________________________
> >> Brmlab mailing list
> >> Brmlab at brmlab.cz
> >> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> >>
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121208/745f92a3/attachment.html>

From zdenekglazer at gmail.com  Sun Dec  9 14:31:23 2012
From: zdenekglazer at gmail.com (Zdenek Glazer)
Date: Sun, 9 Dec 2012 14:31:23 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu ( rasple )
Message-ID: <CAFkxKG9vy=3_MWh3hiVr2u7eCdk_D=6MY+tYAgpmyuep9+9+nQ@mail.gmail.com>

Navrhuji koupit ra?pli ( hrub? piln?k na d?evo a pod ). Nev?m jak
ostatn?m, ale m? docela chyb?, kdy? pot?ebuji odstranit mocn?j??
vrstvu plastu, ?i d?eva. Nekupujte ale pros?m ??dn? ?unt, mysl?m ?e
rozumn? piln?k by m?l st?t n?co okolo 2-3 stovek.

Zdrav?,
Zden?k

From czestmyr at gmail.com  Sun Dec  9 16:04:07 2012
From: czestmyr at gmail.com (Cestmir Houska)
Date: Sun, 9 Dec 2012 16:04:07 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu ( rasple )
In-Reply-To: <CAFkxKG9vy=3_MWh3hiVr2u7eCdk_D=6MY+tYAgpmyuep9+9+nQ@mail.gmail.com>
References: <CAFkxKG9vy=3_MWh3hiVr2u7eCdk_D=6MY+tYAgpmyuep9+9+nQ@mail.gmail.com>
Message-ID: <CAMiVEBPddqOiKm+uALRZ8-1EpRYtgSnkzn77T7PAM+N8_8da-g@mail.gmail.com>

Souhlasim, taky jsem ji uz potreboval...

Cestmir

2012/12/9 Zdenek Glazer <zdenekglazer at gmail.com>:
> Navrhuji koupit ra?pli ( hrub? piln?k na d?evo a pod ). Nev?m jak
> ostatn?m, ale m? docela chyb?, kdy? pot?ebuji odstranit mocn?j??
> vrstvu plastu, ?i d?eva. Nekupujte ale pros?m ??dn? ?unt, mysl?m ?e
> rozumn? piln?k by m?l st?t n?co okolo 2-3 stovek.
>
> Zdrav?,
> Zden?k
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab

From matescb at gmail.com  Sun Dec  9 20:07:52 2012
From: matescb at gmail.com (=?UTF-8?B?TWF0ecOhxaEgxaBrdm9y?=)
Date: Sun, 9 Dec 2012 20:07:52 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu ( rasple )
In-Reply-To: <CAMiVEBPddqOiKm+uALRZ8-1EpRYtgSnkzn77T7PAM+N8_8da-g@mail.gmail.com>
References: <CAFkxKG9vy=3_MWh3hiVr2u7eCdk_D=6MY+tYAgpmyuep9+9+nQ@mail.gmail.com>
	<CAMiVEBPddqOiKm+uALRZ8-1EpRYtgSnkzn77T7PAM+N8_8da-g@mail.gmail.com>
Message-ID: <CA+JTrvkC79YLTiBXMbSPKbMD=znTR9KPGPz=xr0iqDJjLHPQ5A@mail.gmail.com>

Ahoj,
Hlavn? nekupujte nov? piln?k/ra?pli - je to pov?t?inou vyhazov?n? pen?z.

Co se n?stroj? a n??ad? t??e, do?el jsem k n?zoru, ?e st???=kvalita.

P?id?v?m si ra?ple&piln?ky do listu v?c? po kter?ch kouk?m v bazarech(? cca
50K?) a sb?rn?ch surovin?ch(10 K?/Kg).

V ?ter? p?inesu n?jak? ra?ple, piln?ky co m?m v d?ln? nav?c na n?jakou
dlouhodobou prop?j?ku.

Mates


Dne 9. prosince 2012 16:04 Cestmir Houska <czestmyr at gmail.com> napsal(a):

> Souhlasim, taky jsem ji uz potreboval...
>
> Cestmir
>
> 2012/12/9 Zdenek Glazer <zdenekglazer at gmail.com>:
> > Navrhuji koupit ra?pli ( hrub? piln?k na d?evo a pod ). Nev?m jak
> > ostatn?m, ale m? docela chyb?, kdy? pot?ebuji odstranit mocn?j??
> > vrstvu plastu, ?i d?eva. Nekupujte ale pros?m ??dn? ?unt, mysl?m ?e
> > rozumn? piln?k by m?l st?t n?co okolo 2-3 stovek.
> >
> > Zdrav?,
> > Zden?k
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>
------------- dal?? ??st ---------------
HTML p??loha byla odstran?na...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121209/9925ec1a/attachment.html>

From rainbof at gmail.com  Sun Dec  9 20:26:37 2012
From: rainbof at gmail.com (Ondrej Beranek)
Date: Sun, 9 Dec 2012 20:26:37 +0100
Subject: [Brmlab] navrhy na nakup vybaveni do brmlabu ( rasple )
In-Reply-To: <CA+JTrvkC79YLTiBXMbSPKbMD=znTR9KPGPz=xr0iqDJjLHPQ5A@mail.gmail.com>
References: <CAFkxKG9vy=3_MWh3hiVr2u7eCdk_D=6MY+tYAgpmyuep9+9+nQ@mail.gmail.com>
	<CAMiVEBPddqOiKm+uALRZ8-1EpRYtgSnkzn77T7PAM+N8_8da-g@mail.gmail.com>
	<CA+JTrvkC79YLTiBXMbSPKbMD=znTR9KPGPz=xr0iqDJjLHPQ5A@mail.gmail.com>
Message-ID: <CAAEb_Q1VdLC9Qk_qA_5WJUXduDE1dNWbWKw4mbMOzdVgHhfqdg@mail.gmail.com>

s t?m nemohu ne? souhlasit. Dobr? zdroj na toto (zejm?ma jehlov?
piln?ky ? 10k?) je kolbenka.

Dne 9. prosince 2012 20:07 Maty?? ?kvor <matescb at gmail.com> napsal(a):
> Ahoj,
> Hlavn? nekupujte nov? piln?k/ra?pli - je to pov?t?inou vyhazov?n? pen?z.
>
> Co se n?stroj? a n??ad? t??e, do?el jsem k n?zoru, ?e st???=kvalita.
>
> P?id?v?m si ra?ple&piln?ky do listu v?c? po kter?ch kouk?m v bazarech(? cca
> 50K?) a sb?rn?ch surovin?ch(10 K?/Kg).
>
> V ?ter? p?inesu n?jak? ra?ple, piln?ky co m?m v d?ln? nav?c na n?jakou
> dlouhodobou prop?j?ku.
>
> Mates
>
>
> Dne 9. prosince 2012 16:04 Cestmir Houska <czestmyr at gmail.com> napsal(a):
>
>> Souhlasim, taky jsem ji uz potreboval...
>>
>> Cestmir
>>
>> 2012/12/9 Zdenek Glazer <zdenekglazer at gmail.com>:
>> > Navrhuji koupit ra?pli ( hrub? piln?k na d?evo a pod ). Nev?m jak
>> > ostatn?m, ale m? docela chyb?, kdy? pot?ebuji odstranit mocn?j??
>> > vrstvu plastu, ?i d?eva. Nekupujte ale pros?m ??dn? ?unt, mysl?m ?e
>> > rozumn? piln?k by m?l st?t n?co okolo 2-3 stovek.
>> >
>> > Zdrav?,
>> > Zden?k
>> > _______________________________________________
>> > Brmlab mailing list
>> > Brmlab at brmlab.cz
>> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>

From noreply at brmlab.cz  Mon Dec 10 00:00:02 2012
From: noreply at brmlab.cz (noreply at brmlab.cz)
Date: Mon, 10 Dec 2012 00:00:02 +0100 (CET)
Subject: [Brmlab] Tydenni prehled udalosti / Weekly overview of events
Message-ID: <20121209230002.1F30AA09E2@data.brm>

Udalosti v brmlabu tento tyden:
Events taking place in brmlab this week:

12.12.2012 20:00 Mainframe courses #4 - http://brmlab.cz/event/mfcs
16.12.2012 Mitch Altman soldering workshop - http://brmlab.cz/event/mitch_altman_in_prague

From blackhead at blackhead.cz  Mon Dec 10 11:41:39 2012
From: blackhead at blackhead.cz (George Blackhead)
Date: Mon, 10 Dec 2012 11:41:39 +0100
Subject: [Brmlab] Happy birthday Lady Ada
Message-ID: <008c01cdd6c2$ef9ebe90$cedc3bb0$@cz>

The worlds first true lady programmer... ;-)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121210/680c6fa8/attachment.html>

From jarin.hw at gmail.com  Mon Dec 10 11:51:15 2012
From: jarin.hw at gmail.com (j s)
Date: Mon, 10 Dec 2012 11:51:15 +0100
Subject: [Brmlab] Happy birthday Lady Ada
In-Reply-To: <008c01cdd6c2$ef9ebe90$cedc3bb0$@cz>
References: <008c01cdd6c2$ef9ebe90$cedc3bb0$@cz>
Message-ID: <CAO2fjOm8gGabXMJ9=Zig8m3WtNJDnm8KQ7ZGLr5=q-UeooNH2w@mail.gmail.com>

Aby sa predislo nedorozumeniem; predpokladam, ze ide o tuto
programatorku - Lady Ada http://en.wikipedia.org/wiki/Ada_Lovelace a
nie tuto damu http://www.ladyada.net/

2012/12/10 George Blackhead <blackhead at blackhead.cz>:
> The worlds first true lady programmer... ;-)
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>

From pasky at ucw.cz  Tue Dec 11 21:56:38 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Tue, 11 Dec 2012 21:56:38 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
In-Reply-To: <50C26B23.1050205@hladik.cz>
References: <50C26B23.1050205@hladik.cz>
Message-ID: <20121211205638.GW8089@machine.or.cz>

On Fri, Dec 07, 2012 at 11:18:11PM +0100, Zdenek Hladik wrote:
> Muzu donest dve mikropajky a treti ruku s lupou + drobnosti: 2-3
> adaptery 5V/2A,DSO QUAD oscilko, USB log. analyzator apod...

To by bylo uzasne! :) S temi mikropajkami bychom s dovolenim pocitali
v mnozstvi materialu. Zaroven bude nejlepsi, kdyz mikropajky docasne
donese co nejvic lidi, kteri mohou (zvlastne vlastni z domova doneste
Vy ucastnici, kteri mate), aby se urcite dostalo na vsechny prichozi.

> ..at se nejak odvdecim za info/knowhow, ktere ac neclen z brmlabu
> nasavam. Jinak budu spis k ruce, takze na mou osobu nerezervujte
> pajeci pracoviste (ne ze bych teda nejak dobre pajet umel, ale ten
> keyer ac SMD mi kupodivu funguje.
> 
> BTW nestalo by za to poptat nejakou sponzorskou stavebnicku
> (jednodussi, aby se to stihlo spichnout na workshopu) od nejakeho
> prodejce (HWkitchen,PVelectronic,GME,GES,FLAJZAR, a pod.)?
> 
> Sam se muzu poptat OK1CDJ (viz hamnshop.cz) jestli by nevenoval
> nejakou stavebnicku radia, kdyz uz jsou v BRM 4 HAMove....
> 
> Prinesu taky ukazat K3NG keyer a snad uz hotovy Softrock TCVR.

Myslim, ze to by mohlo trochu prekvapit Mitche, ktery myslim svoji
cestu po hackerspacech financuje z velke casti z prodeje svych kitu.

Urcite je ale takove workshopy mozne delat casteji (treba jednou za 6-9
mesicu) a sponsory na dalsi sehnat. Je to jen o tom, kdo do toho bude
ochoten venovat cas a energii. :-)

				Petr "Pasky" Baudis

From johny at 2600.sk  Wed Dec 12 14:07:48 2012
From: johny at 2600.sk (JoHnY)
Date: Wed, 12 Dec 2012 14:07:48 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
Message-ID: <20121212140748.80b2e959.johny@2600.sk>

Kedze stale nebol stanoveny cas a Mitch chcel vediet presny cas aby mohol poslat info aj na twitter, zhodli sme sa ze o 15:00 to bude OK, takze workshop zacina 15:00, Mitch tam bude minimalne hodinu-dve predtym takze mozete prist aj skor. 
Tie veci co treba tak by bolo dobre aby boli uz pripravene tie 2 hodiny vopred. 

 
	bye, JoHnY.


From maillist-brmlab at guckes.net  Wed Dec 12 14:53:33 2012
From: maillist-brmlab at guckes.net (Sven Guckes)
Date: Wed, 12 Dec 2012 14:53:33 +0100
Subject: [Brmlab] adopt-a-geek
Message-ID: <20121212135333.GA831@guckes.net>

hello, brmlab!

this is a call for help..

i'm currently in bratislava with Mitch Altman
where Mitch will give his workshop tonight.
on friday, dec14, we will move on to
prague; Mitch will be giving another
workshop at brmlab on sunday.

Mitch has a place to stay - but i am still looking for one.
a mutual friend from the hackerspace noisebridge,
Iski, is also looking for a place to stay.

would anyone adopt one or two geeks? ^^

by the way, if anyone has questions about some
texttools like mutt, screen, vim, zsh - do ask!
if there is any interest then i can also give
you a talk about those small commands in vim:
http://www.guckes.net/vimberlin/small_commands.txt
questions welcome! :)

oh.. does anyone know when Mitch's workshop
shall take place at brmlab?  without a time
it is kinda hard to make announcements. ;-)

greetings from progressbar/bratislava
Sven

-- 
DecMM-NN day-day City       Workshop
Dec07-11 Fri-Tue Vienna     Dec09 Sun 15-18
Dec11-14 Tue-Fri Bratislava Dec12 Wed 19-23
Dec14-18 Fri-Tue Prague     Dec16 Sun 15-18
Dec18-20 Tue-Thu Dresden    Dec19 Wed ??-??
Dec20-25 Thu-Tue Berlin     Dec23 Sun 15-20
Dec25-29 Tue-Sat Hamburg    Dec25-28  @29C3
Dec29-03 Sat-Thu Berlin     Dec30 Sun 14-18

From zdenek at hladik.cz  Wed Dec 12 19:48:56 2012
From: zdenek at hladik.cz (Zdenek Hladik)
Date: Wed, 12 Dec 2012 19:48:56 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
Message-ID: <50C8D198.2010704@hladik.cz>

Potvrzuju napevno ty 3-4 mikropajky s regulaci a nejake 
dalsi drobnosti..

Asi by to chtelo prekopcit do pozvanky na wiki z Mitchovych 
stranek seznam doporucenych propriet (pripadne i s prekladem 
pro ty mene zdatne v EN), aby si toho prinesli lidi co 
nejvic - urychli to praci a snizi zmatek...

Asi krome pajek s houbickama jsou dulezite ostre stipky a 
svetlo/lupy. Ostatni se da nejak flikovat (odmotat kousky 
cinu, pujcit si zdroje,baterky na vyzkouseni atd.)

Co mozna neni uplne zrejme - dobry zdroje svetla - nejake 
lampicky a dost psu 230V. Zvlast zacatecnici potreboujou 
dobre videt co napachali.

S temi CZ kity asi mas pravdu, i kdyz nevim jestli mu to 
teda pokreje alespon letenky.

Mozna se poptejte Videnaku a Blavanu, co nejvic chybelo...

Mozna taky pro mimoprazske pridejte na wiki delku workshopu 
(3h?)


                                 Drsnik




From blackhead at blackhead.cz  Wed Dec 12 20:41:00 2012
From: blackhead at blackhead.cz (George Blackhead)
Date: Wed, 12 Dec 2012 20:41:00 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
In-Reply-To: <20121212140748.80b2e959.johny@2600.sk>
References: <20121212140748.80b2e959.johny@2600.sk>
Message-ID: <000f01cdd8a0$9e4ebe20$daec3a60$@cz>

Brm!
Mam dotaz: Od kdy bude Mitch v Praze? Rad bych ho videl i mimo workshop,
bude-li k tomu vhodny cas... ;-)
Mate nekdo prehled o itinerari jeho letosni prazske navstevy?

Diky predem...
Blackhead


-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz] On Behalf
Of JoHnY
Sent: Wednesday, December 12, 2012 2:08 PM
To: brmlab at brmlab.cz
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!

Kedze stale nebol stanoveny cas a Mitch chcel vediet presny cas aby mohol
poslat info aj na twitter, zhodli sme sa ze o 15:00 to bude OK, takze
workshop zacina 15:00, Mitch tam bude minimalne hodinu-dve predtym takze
mozete prist aj skor. 
Tie veci co treba tak by bolo dobre aby boli uz pripravene tie 2 hodiny
vopred. 

 
	bye, JoHnY.

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


From ruza at ruza.eu  Wed Dec 12 20:49:16 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Wed, 12 Dec 2012 20:49:16 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
In-Reply-To: <000f01cdd8a0$9e4ebe20$daec3a60$@cz>
References: <20121212140748.80b2e959.johny@2600.sk>
	<000f01cdd8a0$9e4ebe20$daec3a60$@cz>
Message-ID: <50C8DFBC.5050607@ruza.eu>

https://www.brmlab.cz/event/mitch_altman_in_prague
https://www.noisebridge.net/wiki/MitchTripEU_Nov_Dec_2012

On 12/12/2012 08:41 PM, George Blackhead wrote:
> Brm!
> Mam dotaz: Od kdy bude Mitch v Praze? Rad bych ho videl i mimo workshop,
> bude-li k tomu vhodny cas... ;-)
> Mate nekdo prehled o itinerari jeho letosni prazske navstevy?
> 
> Diky predem...
> Blackhead

From longobord at gmail.com  Wed Dec 12 20:50:39 2012
From: longobord at gmail.com (Christie Dudley)
Date: Wed, 12 Dec 2012 11:50:39 -0800
Subject: [Brmlab] adopt-a-geek
In-Reply-To: <20121212135333.GA831@guckes.net>
References: <20121212135333.GA831@guckes.net>
Message-ID: <CAEZdeUZKiVkgBjONMd3y5C7Dop+k_4oeYDP4su0ctcS7CJaxvg@mail.gmail.com>

It is an interesting time of year! I am also looking for a place to stay,
but at a different time. I have been invited to speak at CCC and was hoping
to see Prague and your hackerspace before then. Come see my talk if you
make it to CCC on privacy in next-generation cars:
https://events.ccc.de/congress/2012/Fahrplan/events/5095.en.html Also, I
would love to have someone help me practice my talk.

I will be traveling alone and hope to meet people who can help show me the
best of Prague. I plan to spend 20-24 Dec in Prague. Hopefully, that will
be enough time to see the best of things.

Christie

_______
"Privacy is not a discrete commodity, possessed absolutely or not at all."
Justice Marshall, Smith v. Maryland dissent



On Wed, Dec 12, 2012 at 5:53 AM, Sven Guckes <maillist-brmlab at guckes.net>wrote:

> hello, brmlab!
>
> this is a call for help..
>
> i'm currently in bratislava with Mitch Altman
> where Mitch will give his workshop tonight.
> on friday, dec14, we will move on to
> prague; Mitch will be giving another
> workshop at brmlab on sunday.
>
> Mitch has a place to stay - but i am still looking for one.
> a mutual friend from the hackerspace noisebridge,
> Iski, is also looking for a place to stay.
>
> would anyone adopt one or two geeks? ^^
>
> by the way, if anyone has questions about some
> texttools like mutt, screen, vim, zsh - do ask!
> if there is any interest then i can also give
> you a talk about those small commands in vim:
> http://www.guckes.net/vimberlin/small_commands.txt
> questions welcome! :)
>
> oh.. does anyone know when Mitch's workshop
> shall take place at brmlab?  without a time
> it is kinda hard to make announcements. ;-)
>
> greetings from progressbar/bratislava
> Sven
>
> --
> DecMM-NN day-day City       Workshop
> Dec07-11 Fri-Tue Vienna     Dec09 Sun 15-18
> Dec11-14 Tue-Fri Bratislava Dec12 Wed 19-23
> Dec14-18 Fri-Tue Prague     Dec16 Sun 15-18
> Dec18-20 Tue-Thu Dresden    Dec19 Wed ??-??
> Dec20-25 Thu-Tue Berlin     Dec23 Sun 15-20
> Dec25-29 Tue-Sat Hamburg    Dec25-28  @29C3
> Dec29-03 Sat-Thu Berlin     Dec30 Sun 14-18
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121212/67b5087a/attachment.html>

From stick at gk2.sk  Wed Dec 12 21:10:27 2012
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 12 Dec 2012 21:10:27 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
In-Reply-To: <000f01cdd8a0$9e4ebe20$daec3a60$@cz>
References: <20121212140748.80b2e959.johny@2600.sk>
	<000f01cdd8a0$9e4ebe20$daec3a60$@cz>
Message-ID: <50C8E4B3.40100@gk2.sk>

On 12/12/12 20:41, George Blackhead wrote:
> Brm!
> Mam dotaz: Od kdy bude Mitch v Praze? Rad bych ho videl i mimo workshop,
> bude-li k tomu vhodny cas... ;-)
> Mate nekdo prehled o itinerari jeho letosni prazske navstevy?

Myslim, ze Mitch hladal niekoho kto sa mu bude venovat aj _mimo_
workshop. Vacsinou bol v Prahe iba kratko, tentokrat je tu dlhsie a
konecne by si chcel pozriet rozne pamiatky a pod. Ak je to stale
aktualne tak smelo do toho! :)


-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>

From johny at 2600.sk  Wed Dec 12 22:48:06 2012
From: johny at 2600.sk (JoHnY)
Date: Wed, 12 Dec 2012 22:48:06 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
In-Reply-To: <000f01cdd8a0$9e4ebe20$daec3a60$@cz>
References: <20121212140748.80b2e959.johny@2600.sk>
	<000f01cdd8a0$9e4ebe20$daec3a60$@cz>
Message-ID: <20121212224806.6c56d7ae.johny@2600.sk>

Bude byvat u mna tak mu mozem povedat ze mas zaujem sa s nim stretnut, pripadne mozme ist niekam na pivo alebo co, len povedz kedy ti to vyhovuje a budem mu to tlmocit.

JoHnY

On Wed, 12 Dec 2012 20:41:00 +0100
"George Blackhead" <blackhead at blackhead.cz> wrote:

> Brm!
> Mam dotaz: Od kdy bude Mitch v Praze? Rad bych ho videl i mimo
> workshop, bude-li k tomu vhodny cas... ;-)
> Mate nekdo prehled o itinerari jeho letosni prazske navstevy?
> 
> Diky predem...
> Blackhead
> 
> 
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz] On
> Behalf Of JoHnY
> Sent: Wednesday, December 12, 2012 2:08 PM
> To: brmlab at brmlab.cz
> Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
> 
> Kedze stale nebol stanoveny cas a Mitch chcel vediet presny cas aby
> mohol poslat info aj na twitter, zhodli sme sa ze o 15:00 to bude
> OK, takze workshop zacina 15:00, Mitch tam bude minimalne
> hodinu-dve predtym takze mozete prist aj skor. 
> Tie veci co treba tak by bolo dobre aby boli uz pripravene tie 2
> hodiny vopred. 
> 
>  
> 	bye, JoHnY.
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


 
	bye, JoHnY.


From johny at 2600.sk  Wed Dec 12 22:49:24 2012
From: johny at 2600.sk (JoHnY)
Date: Wed, 12 Dec 2012 22:49:24 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
In-Reply-To: <20121212140748.80b2e959.johny@2600.sk>
References: <20121212140748.80b2e959.johny@2600.sk>
Message-ID: <20121212224924.4d901a7f.johny@2600.sk>

Mimochodom pozeram ze o 10 dni ma Mitch narodeniny, nechtete mu niekto upiect tortu alebo nieco? :-)))

On Wed, 12 Dec 2012 14:07:48 +0100
JoHnY <johny at 2600.sk> wrote:

> Kedze stale nebol stanoveny cas a Mitch chcel vediet presny cas aby
> mohol poslat info aj na twitter, zhodli sme sa ze o 15:00 to bude
> OK, takze workshop zacina 15:00, Mitch tam bude minimalne
> hodinu-dve predtym takze mozete prist aj skor. Tie veci co treba
> tak by bolo dobre aby boli uz pripravene tie 2 hodiny vopred. 
> 
>  
> 	bye, JoHnY.
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


 
	bye, JoHnY.


From blackhead at blackhead.cz  Thu Dec 13 02:52:08 2012
From: blackhead at blackhead.cz (George Blackhead)
Date: Thu, 13 Dec 2012 02:52:08 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
In-Reply-To: <20121212224806.6c56d7ae.johny@2600.sk>
References: <20121212140748.80b2e959.johny@2600.sk>	<000f01cdd8a0$9e4ebe20$daec3a60$@cz>
	<20121212224806.6c56d7ae.johny@2600.sk>
Message-ID: <001b01cdd8d4$76369f50$62a3ddf0$@cz>

No, jeste porozmyslim, jestli mu budu mit vubec co nabidnout, protoze v
pamatkach se az tak uplne nevyznam, historie mesta me nejak moc nezajima...
;-) Mozna dam neco malo dohromady, ale urcite ho rad uvidim i mimo workshop!
Napis mi prosim, kde bydlis, abych vedel, kam si mam nasmerovat starting
point. ;-)
Diky

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz] On Behalf
Of JoHnY
Sent: Wednesday, December 12, 2012 10:48 PM
To: brmlab at brmlab.cz
Subject: Re: [Brmlab] Mich Altman workshop v nedelu o 15:00!

Bude byvat u mna tak mu mozem povedat ze mas zaujem sa s nim stretnut,
pripadne mozme ist niekam na pivo alebo co, len povedz kedy ti to vyhovuje a
budem mu to tlmocit.

JoHnY

On Wed, 12 Dec 2012 20:41:00 +0100
"George Blackhead" <blackhead at blackhead.cz> wrote:

> Brm!
> Mam dotaz: Od kdy bude Mitch v Praze? Rad bych ho videl i mimo
> workshop, bude-li k tomu vhodny cas... ;-)
> Mate nekdo prehled o itinerari jeho letosni prazske navstevy?
> 
> Diky predem...
> Blackhead
> 
> 
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz] On
> Behalf Of JoHnY
> Sent: Wednesday, December 12, 2012 2:08 PM
> To: brmlab at brmlab.cz
> Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
> 
> Kedze stale nebol stanoveny cas a Mitch chcel vediet presny cas aby
> mohol poslat info aj na twitter, zhodli sme sa ze o 15:00 to bude
> OK, takze workshop zacina 15:00, Mitch tam bude minimalne
> hodinu-dve predtym takze mozete prist aj skor. 
> Tie veci co treba tak by bolo dobre aby boli uz pripravene tie 2
> hodiny vopred. 
> 
>  
> 	bye, JoHnY.
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


 
	bye, JoHnY.

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


From pasky at ucw.cz  Thu Dec 13 11:17:03 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Thu, 13 Dec 2012 11:17:03 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
In-Reply-To: <001b01cdd8d4$76369f50$62a3ddf0$@cz>
References: <20121212140748.80b2e959.johny@2600.sk>
	<000f01cdd8a0$9e4ebe20$daec3a60$@cz>
	<20121212224806.6c56d7ae.johny@2600.sk>
	<001b01cdd8d4$76369f50$62a3ddf0$@cz>
Message-ID: <20121213101703.GZ8089@machine.or.cz>

  Ahoj!

On Thu, Dec 13, 2012 at 02:52:08AM +0100, George Blackhead wrote:
> No, jeste porozmyslim, jestli mu budu mit vubec co nabidnout, protoze v
> pamatkach se az tak uplne nevyznam, historie mesta me nejak moc nezajima...
> ;-) Mozna dam neco malo dohromady, ale urcite ho rad uvidim i mimo workshop!
> Napis mi prosim, kde bydlis, abych vedel, kam si mam nasmerovat starting
> point. ;-)

  Myslim, ze to zalezi jen na Vasi domluve (a koordinace s Johnym),
treba by rad videl i Tvoji sbirku historickych pocitacu nebo pamatky
technictejsiho charakteru...  :) Rozhodne se neboj se cehokoliv ujmout.

				Petr "Pasky" Baudis

From jeniks at kxt.cz  Thu Dec 13 11:36:06 2012
From: jeniks at kxt.cz (Jan Svec)
Date: Thu, 13 Dec 2012 11:36:06 +0100
Subject: [Brmlab] Mich Altman workshop v nedelu o 15:00!
In-Reply-To: <20121213101703.GZ8089@machine.or.cz>
References: <20121212140748.80b2e959.johny@2600.sk>
	<000f01cdd8a0$9e4ebe20$daec3a60$@cz>
	<20121212224806.6c56d7ae.johny@2600.sk>
	<001b01cdd8d4$76369f50$62a3ddf0$@cz>
	<20121213101703.GZ8089@machine.or.cz>
Message-ID: <C52D1B70-B7C0-4AD8-AEF4-B9C5E0E61FB1@kxt.cz>

No, pokud se s nim na necem dohodnete, mozna by nebylo od veci to pak napsat, treba by se pridalo vic lidi :]
Dik

Kermit

On Dec 13, 2012, at 11:17 AM, Petr Baudis <pasky at ucw.cz> wrote:

>  Ahoj!
> 
> On Thu, Dec 13, 2012 at 02:52:08AM +0100, George Blackhead wrote:
>> No, jeste porozmyslim, jestli mu budu mit vubec co nabidnout, protoze v
>> pamatkach se az tak uplne nevyznam, historie mesta me nejak moc nezajima...
>> ;-) Mozna dam neco malo dohromady, ale urcite ho rad uvidim i mimo workshop!
>> Napis mi prosim, kde bydlis, abych vedel, kam si mam nasmerovat starting
>> point. ;-)
> 
>  Myslim, ze to zalezi jen na Vasi domluve (a koordinace s Johnym),
> treba by rad videl i Tvoji sbirku historickych pocitacu nebo pamatky
> technictejsiho charakteru...  :) Rozhodne se neboj se cehokoliv ujmout.
> 
> 				Petr "Pasky" Baudis
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


From zdenek at hladik.cz  Thu Dec 13 17:37:23 2012
From: zdenek at hladik.cz (Zdenek Hladik)
Date: Thu, 13 Dec 2012 17:37:23 +0100
Subject: [Brmlab] Blikatko na satelitu dnes 23:10 SEC
Message-ID: <50CA0443.2030201@hladik.cz>

Dnes vecer nad vasimi hlavami proleti Japonska druzice 
FITSAT. Na palube je LED blikatko viditelne ocima.

Vysila morse: HI DE NIWAKA JAPAN


p?edpov?? pro p?elet 13.12.2012 :

za??tek aktivace LED sv?tel : :22:10:30 UT - AZ= 277?.H=10?- 
pod  Pegasem, jasnost LED   11,9 mag

Konec LED : 22:14:30 UT, AZ 162?, H=30?-  pod M42 , jasnost 
LED  7,9mag

                               Drsnik

From pasky at ucw.cz  Sat Dec 15 00:14:11 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Sat, 15 Dec 2012 00:14:11 +0100
Subject: [Brmlab] Mitch Altman opet zavita do Prahy
In-Reply-To: <50C8D198.2010704@hladik.cz>
References: <50C8D198.2010704@hladik.cz>
Message-ID: <20121214231411.GB8089@machine.or.cz>

On Wed, Dec 12, 2012 at 07:48:56PM +0100, Zdenek Hladik wrote:
> Potvrzuju napevno ty 3-4 mikropajky s regulaci a nejake dalsi
> drobnosti..

Diky!

> Asi by to chtelo prekopcit do pozvanky na wiki z Mitchovych stranek
> seznam doporucenych propriet (pripadne i s prekladem pro ty mene
> zdatne v EN), aby si toho prinesli lidi co nejvic - urychli to praci
> a snizi zmatek...

To by asi bylo fajn, klidne do toho. :-)

> Asi krome pajek s houbickama jsou dulezite ostre stipky a
> svetlo/lupy. Ostatni se da nejak flikovat (odmotat kousky cinu,
> pujcit si zdroje,baterky na vyzkouseni atd.)
> 
> Co mozna neni uplne zrejme - dobry zdroje svetla - nejake lampicky a
> dost psu 230V. Zvlast zacatecnici potreboujou dobre videt co
> napachali.

Psy rikal SPECZ, ze donese, tak snad se podari. Jinak jsem v osvetleni
predpokladal, ze budou stacit brmlabi zarivky, myslite, ze ne?

-- 
				Petr "Pasky" Baudis
	For every complex problem there is an answer that is clear,
	simple, and wrong.  -- H. L. Mencken

From johny at 2600.sk  Sat Dec 15 11:04:26 2012
From: johny at 2600.sk (JoHnY)
Date: Sat, 15 Dec 2012 11:04:26 +0100
Subject: [Brmlab] Mitchov workshop
Message-ID: <20121215110426.120ed454.johny@2600.sk>

Mitch sa pytal ci je vsetko pripravene na ten workshop, ja o tom nic neviem, takze je? Ak nieje tak by tam vsetky veci chcel mat asi tie dve hodiny pred workshopom, cize v nedelu o jednej, aby to mohol pripravit. 

 
	bye, JoHnY.


From pasky at ucw.cz  Sat Dec 15 12:29:26 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Sat, 15 Dec 2012 12:29:26 +0100
Subject: [Brmlab] Mitchov workshop
In-Reply-To: <20121215110426.120ed454.johny@2600.sk>
References: <20121215110426.120ed454.johny@2600.sk>
Message-ID: <20121215112926.GC8089@machine.or.cz>

  Ahoj!

On Sat, Dec 15, 2012 at 11:04:26AM +0100, JoHnY wrote:
> Mitch sa pytal ci je vsetko pripravene na ten workshop, ja o tom nic neviem, takze je? Ak nieje tak by tam vsetky veci chcel mat asi tie dve hodiny pred workshopom, cize v nedelu o jednej, aby to mohol pripravit. 

  Co se jeste melo sejit:

  * Dalsi mikropajky - ty jeste budou prubezne nosit ruzni lide az
    do workshopu, to snad nebude problem

  * Dalsi prodluzovacky - ty slibil donest SPECZ, budou tam?

  * AA baterie - nakoupil Jenda, budou tam?

  Jinak by bylo dobre, aby se nas tam co nejvic seslo uz dejme
tomu kolem 11:00 a pustili se do uklizeni, mame tam spoustu spiny
a haraburdi. Kdo muzete dorazit?

				Petr "Pasky" Baudis

From jeniks at kxt.cz  Sat Dec 15 12:44:36 2012
From: jeniks at kxt.cz (Jan Svec)
Date: Sat, 15 Dec 2012 12:44:36 +0100
Subject: [Brmlab] Mitchov workshop
In-Reply-To: <20121215112926.GC8089@machine.or.cz>
References: <20121215110426.120ed454.johny@2600.sk>
	<20121215112926.GC8089@machine.or.cz>
Message-ID: <E24262A0-F05A-431D-B81C-E8439242EFD6@kxt.cz>


On Dec 15, 2012, at 12:29 PM, Petr Baudis <pasky at ucw.cz> wrote:

>  Ahoj!
> 
> On Sat, Dec 15, 2012 at 11:04:26AM +0100, JoHnY wrote:
>> Mitch sa pytal ci je vsetko pripravene na ten workshop, ja o tom nic neviem, takze je? Ak nieje tak by tam vsetky veci chcel mat asi tie dve hodiny pred workshopom, cize v nedelu o jednej, aby to mohol pripravit. 
> 
>  Co se jeste melo sejit:
> 
>  * Dalsi mikropajky - ty jeste budou prubezne nosit ruzni lide az
>    do workshopu, to snad nebude problem
> 
>  * Dalsi prodluzovacky - ty slibil donest SPECZ, budou tam?

Muzu zapujcit, kolik jich potrebujem?
> 
> 
>  Jinak by bylo dobre, aby se nas tam co nejvic seslo uz dejme
> tomu kolem 11:00 a pustili se do uklizeni, mame tam spoustu spiny
> a haraburdi. Kdo muzete dorazit?

Ja dorazim, mozna az ve 12, ale dorazim.

Kermit

From pasky at ucw.cz  Sat Dec 15 12:52:34 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Sat, 15 Dec 2012 12:52:34 +0100
Subject: [Brmlab] Mitchov workshop
In-Reply-To: <E24262A0-F05A-431D-B81C-E8439242EFD6@kxt.cz>
References: <20121215110426.120ed454.johny@2600.sk>
	<20121215112926.GC8089@machine.or.cz>
	<E24262A0-F05A-431D-B81C-E8439242EFD6@kxt.cz>
Message-ID: <20121215115234.GE8089@machine.or.cz>

On Sat, Dec 15, 2012 at 12:44:36PM +0100, Jan Svec wrote:
> On Dec 15, 2012, at 12:29 PM, Petr Baudis <pasky at ucw.cz> wrote:
> > On Sat, Dec 15, 2012 at 11:04:26AM +0100, JoHnY wrote:
> >> Mitch sa pytal ci je vsetko pripravene na ten workshop, ja o tom nic neviem, takze je? Ak nieje tak by tam vsetky veci chcel mat asi tie dve hodiny pred workshopom, cize v nedelu o jednej, aby to mohol pripravit. 
> > 
> >  Co se jeste melo sejit:
> > 
> >  * Dalsi mikropajky - ty jeste budou prubezne nosit ruzni lide az
> >    do workshopu, to snad nebude problem
> > 
> >  * Dalsi prodluzovacky - ty slibil donest SPECZ, budou tam?
> 
> Muzu zapujcit, kolik jich potrebujem?

Nevim, jak je na tom SPECZ, takze kdyby to slo snadno, radeji dones,
lepe jich mit zbytecne hodne. :-) Trochu tezko se to odhaduje, ale
radove 4-5, at mame rezervu. Cil je takovy, aby u kazdeho pajeciho
mista (nebo dvojice mist vedle sebe) byly snadno pristupne alespon
dve zasuvky.

> >  Jinak by bylo dobre, aby se nas tam co nejvic seslo uz dejme
> > tomu kolem 11:00 a pustili se do uklizeni, mame tam spoustu spiny
> > a haraburdi. Kdo muzete dorazit?
> 
> Ja dorazim, mozna az ve 12, ale dorazim.

Skvele!

				Petr "Pasky" Baudis

From nephirus at kerestes.cz  Sat Dec 15 13:03:20 2012
From: nephirus at kerestes.cz (Nephirus)
Date: Sat, 15 Dec 2012 13:03:20 +0100
Subject: [Brmlab] Mitchov workshop
In-Reply-To: <20121215112926.GC8089@machine.or.cz>
References: <20121215110426.120ed454.johny@2600.sk>
	<20121215112926.GC8089@machine.or.cz>
Message-ID: <50CC6708.3060302@kerestes.cz>

Brm,

On 12/15/2012 12:29 PM, Petr Baudis wrote:
>   Co se jeste melo sejit:
> 
>   * Dalsi mikropajky - ty jeste budou prubezne nosit ruzni lide az
>     do workshopu, to snad nebude problem

Jeste jednu (takovou tu uplne obycejnou bez regulace) donesu zitra.

nephirus

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 291 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121215/9439fb9d/attachment.pgp>

From miroslav.ludvik at 4safety.cz  Sat Dec 15 13:32:53 2012
From: miroslav.ludvik at 4safety.cz (Miroslav Ludvik)
Date: Sat, 15 Dec 2012 13:32:53 +0100
Subject: [Brmlab] zdroj k IBM R40
Message-ID: <016B6C2A-A906-42E1-8879-6E52EB0E9ACA@4safety.cz>

Ahoj, 
nem?te n?kdo zdroj k notasu IBM R40?

D?ky
Lui
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 841 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121215/0a7d6795/attachment.pgp>

From niekt0 at hysteria.sk  Sat Dec 15 17:17:19 2012
From: niekt0 at hysteria.sk (niekt0)
Date: Sat, 15 Dec 2012 17:17:19 +0100
Subject: [Brmlab] Mitchov workshop
In-Reply-To: <20121215110426.120ed454.johny@2600.sk>
References: <20121215110426.120ed454.johny@2600.sk>
Message-ID: <20121215161719.GA8800@m>

Vazeny, 
otvaram opat otazku ubytka pre mitchovho spolucestujuceho.
Vyzera ze tam kde sme ho vcera ubytovali nemoze zostat az do utorka,
 nemate nahodou niekto volno ze by ste ho prichylili? 
Je to pomerne urgentne.

thx,
n.

On Sat, Dec 15, 2012 at 11:04:26AM +0100, JoHnY wrote:
> Mitch sa pytal ci je vsetko pripravene na ten workshop, ja o tom nic neviem, takze je? Ak nieje tak by tam vsetky veci chcel mat asi tie dve hodiny pred workshopom, cize v nedelu o jednej, aby to mohol pripravit. 
> 
>  
> 	bye, JoHnY.
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121215/6af92be6/attachment-0001.pgp>

From michal at tulacek.eu  Sat Dec 15 17:45:58 2012
From: michal at tulacek.eu (=?iso-8859-2?Q?Michal_Tul=E1=E8ek?=)
Date: Sat, 15 Dec 2012 17:45:58 +0100
Subject: [Brmlab] Dary Brmlab
Message-ID: <2961204E-C756-4384-B1CE-8D1580EDBF49@tulacek.eu>

Ahoj,

  pokud chcete Brmlabu neco darovat, a sami si tak snizit danovy zaklad za rok 2012, tak vezte, ze vam na to zbyva 14 dni do konce mesice. 

Cislo uctu pro dary je stejne jako pro clenske prispevky, tedy  2500079551/2010, specificky symbol je 2. Pokud jste neco v prubehu roku daovali jinak (tzn. bez zpravy pro prijemce, bez specifickeho symbolu 2, nebo postupem dle predpisu o cl. prispevcich), tak se ozvete rade (idealne tak do pulky ledna), protoze Brmlab musi vykazat financaku do konce ledna. Brmlab vam v prubehu ledna pro vas financak/zamestnavatele vyda potvrzeni o tom, ze jste neco darovali, opet se s tim obratte na radu.

Dekujeme za kazdy prispevek, jen prosim mejte na pameti, ze kazda ucetni polozka nas stoji 30 Kc, takze u daru v radu stokorun se misto toho spis vyplati koupit brmlabu raspli, vrtacku, balik papiru (na mailing listu nebo irc vam jiste poradi) a nebo udelat nejakou peknou prednasku :)


-mt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121215/c29165e0/attachment.html>

From bogomil at fedoraproject.org  Sun Dec 16 09:16:59 2012
From: bogomil at fedoraproject.org (Bogomil "Bogo" Shopov (Fedora Project))
Date: Sun, 16 Dec 2012 09:16:59 +0100
Subject: [Brmlab] Mitchov workshop
In-Reply-To: <20121215161719.GA8800@m>
References: <20121215110426.120ed454.johny@2600.sk> <20121215161719.GA8800@m>
Message-ID: <CAPx9nzaph9M3-49TjjbSwc1qjwd_0fT30zjNXwzCohkgP9n7Gw@mail.gmail.com>

Morning,
So do workshop start at 1500. Do I have  to bring anything?
//Bogo

2012/12/15 niekt0 <niekt0 at hysteria.sk>

> Vazeny,
> otvaram opat otazku ubytka pre mitchovho spolucestujuceho.
> Vyzera ze tam kde sme ho vcera ubytovali nemoze zostat az do utorka,
>  nemate nahodou niekto volno ze by ste ho prichylili?
> Je to pomerne urgentne.
>
> thx,
> n.
>
> On Sat, Dec 15, 2012 at 11:04:26AM +0100, JoHnY wrote:
> > Mitch sa pytal ci je vsetko pripravene na ten workshop, ja o tom nic
> neviem, takze je? Ak nieje tak by tam vsetky veci chcel mat asi tie dve
> hodiny pred workshopom, cize v nedelu o jednej, aby to mohol pripravit.
> >
> >
> >       bye, JoHnY.
> >
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>
>


-- 
Bogomil "Bogo" Shopov
Open(Web) Thinker and doer.
http://talkweb.eu

++
Education is the most powerful weapon which you can use to change the world.
-- Nelson Mandela
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121216/3bad8c47/attachment.html>

From bogomil.fedora at gmail.com  Sun Dec 16 09:17:32 2012
From: bogomil.fedora at gmail.com (Bogomil "Bogo" Shopov (Fedora Project))
Date: Sun, 16 Dec 2012 09:17:32 +0100
Subject: [Brmlab] Mitchov workshop
In-Reply-To: <CAPx9nzaph9M3-49TjjbSwc1qjwd_0fT30zjNXwzCohkgP9n7Gw@mail.gmail.com>
References: <20121215110426.120ed454.johny@2600.sk> <20121215161719.GA8800@m>
	<CAPx9nzaph9M3-49TjjbSwc1qjwd_0fT30zjNXwzCohkgP9n7Gw@mail.gmail.com>
Message-ID: <CAPx9nzYWoNJnab5WKzzVjHe5cX3CAn-mQ0jPma6G0ajTfk2KCw@mail.gmail.com>

Morning,
So do workshop start at 1500. Do I have  to bring anything?

2012/12/16 Bogomil "Bogo" Shopov (Fedora Project) <bogomil at fedoraproject.org
>

> Morning,
> So do workshop start at 1500. Do I have  to bring anything?
> //Bogo
>
>
> 2012/12/15 niekt0 <niekt0 at hysteria.sk>
>
>> Vazeny,
>> otvaram opat otazku ubytka pre mitchovho spolucestujuceho.
>> Vyzera ze tam kde sme ho vcera ubytovali nemoze zostat az do utorka,
>>  nemate nahodou niekto volno ze by ste ho prichylili?
>> Je to pomerne urgentne.
>>
>> thx,
>> n.
>>
>> On Sat, Dec 15, 2012 at 11:04:26AM +0100, JoHnY wrote:
>> > Mitch sa pytal ci je vsetko pripravene na ten workshop, ja o tom nic
>> neviem, takze je? Ak nieje tak by tam vsetky veci chcel mat asi tie dve
>> hodiny pred workshopom, cize v nedelu o jednej, aby to mohol pripravit.
>> >
>> >
>> >       bye, JoHnY.
>> >
>> > _______________________________________________
>> > Brmlab mailing list
>> > Brmlab at brmlab.cz
>> > http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
>>
>>
>
>
> --
> Bogomil "Bogo" Shopov
> Open(Web) Thinker and doer.
> http://talkweb.eu
>
> ++
> Education is the most powerful weapon which you can use to change the
> world.
> -- Nelson Mandela
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121216/bf2a0fda/attachment.html>

From pasky at ucw.cz  Sun Dec 16 12:28:47 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Sun, 16 Dec 2012 12:28:47 +0100
Subject: [Brmlab] Mitchov workshop
In-Reply-To: <CAPx9nzYWoNJnab5WKzzVjHe5cX3CAn-mQ0jPma6G0ajTfk2KCw@mail.gmail.com>
References: <20121215110426.120ed454.johny@2600.sk> <20121215161719.GA8800@m>
	<CAPx9nzaph9M3-49TjjbSwc1qjwd_0fT30zjNXwzCohkgP9n7Gw@mail.gmail.com>
	<CAPx9nzYWoNJnab5WKzzVjHe5cX3CAn-mQ0jPma6G0ajTfk2KCw@mail.gmail.com>
Message-ID: <20121216112847.GA9138@machine.or.cz>

  Hi!

On Sun, Dec 16, 2012 at 09:17:32AM +0100, Bogomil "Bogo" Shopov (Fedora Project) wrote:
> Morning,
> So do workshop start at 1500. Do I have  to bring anything?

  Yes, the workshop begins at 15:00. If you already have a solder
or other supplies, bringing it would be nice, though not strictly
required.

				Petr "Pasky" Baudis

From nephirus at kerestes.cz  Sun Dec 16 12:40:23 2012
From: nephirus at kerestes.cz (Nephirus)
Date: Sun, 16 Dec 2012 12:40:23 +0100
Subject: [Brmlab] =?utf-8?b?WmRyb2ogayBha3VtdWzDoXRvcm92w6kgcMOhamXEjWNl?=
Message-ID: <50CDB327.20200@kerestes.cz>

Brm,

ten, kdo si p?j?il zdroj (12 V DC, 50 W) k akumul?torov? p?je?ce ze
?upl?ku v HW labu, nech? jej urychlen? vr?t? zp?t na m?sto. P?je?ka m?
hlad a pot?ebuje nakrmit.

D?kuji za pozornost,
Nephirus

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 293 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121216/47212037/attachment.pgp>

From noreply at brmlab.cz  Mon Dec 17 00:00:01 2012
From: noreply at brmlab.cz (noreply at brmlab.cz)
Date: Mon, 17 Dec 2012 00:00:01 +0100 (CET)
Subject: [Brmlab] Tydenni prehled udalosti / Weekly overview of events
Message-ID: <20121216230001.C3151A046A@data.brm>

Udalosti v brmlabu tento tyden:
Events taking place in brmlab this week:

20.12.2012 19:00 V?no?n? DSP // posledni prednaska pred koncem sveta - http://brmlab.cz/event/dsp#vanocni_dspposledni_prednaska_pred_koncem_sveta_20122012_1900
19.12.2012 20:00 Mainframe courses #5-6 - http://brmlab.cz/event/mfcs
21.12.2012 21:12 End Of The World - http://brmlab.cz/event/end_of_the_world

From niekt0 at hysteria.sk  Mon Dec 17 21:43:50 2012
From: niekt0 at hysteria.sk (niekt0)
Date: Mon, 17 Dec 2012 21:43:50 +0100
Subject: [Brmlab] prof. Warwick - 18.12 9:00, Karlovo namesti
Message-ID: <20121217204350.GA27904@m>

Zdar,
na poslednu chvilu, ale predsa:
Zajtra o 9:00 bude mat na Karlovom namesti prednasku Kevin Warwick,
vstup volny, kazdy kto ma zaujem je vitany.
Budova E, miestnost 112 (Vycichlova knihovna)

Prikladam paste z informacneho systemu

n.

---

Annotation:

This course (presented in English) will investigate Artificial Intelligence
(AI) as it really is today. Some of the most recent advances and
developments in the field will be considered and put in the context of more
traditional AI methods. The course will include philosophical argument and
descriptions of practical experimentation - mathematics will be kept to an
absolute minimum.


Provisional Lectures:

1,2: What exactly is intelligence in humans, animals and machines?

3: Classical AI - particularly Expert Systems and Fuzzy Logic.

4: New philosophy part 1

5: New Philosophy part 2

6: Turing Update - can machines communicate like a human?

7: AI in robots - where does it stand?

8: Growing brains - Biological AI - technical aspects

9: Philosophical aspects of growing brains

10: AI - The future?

It is as well possible not to register for this course at all and still
attend individual lectures that you'd be interested in.

From pasky at ucw.cz  Mon Dec 17 22:11:28 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 17 Dec 2012 22:11:28 +0100
Subject: [Brmlab] prof. Warwick - 18.12 9:00, Karlovo namesti
In-Reply-To: <20121217204350.GA27904@m>
References: <20121217204350.GA27904@m>
Message-ID: <20121217211128.GB9138@machine.or.cz>

  Ahoj!

On Mon, Dec 17, 2012 at 09:43:50PM +0100, niekt0 wrote:
> na poslednu chvilu, ale predsa:
> Zajtra o 9:00 bude mat na Karlovom namesti prednasku Kevin Warwick,
> vstup volny, kazdy kto ma zaujem je vitany.
> Budova E, miestnost 112 (Vycichlova knihovna)
> 
> Prikladam paste z informacneho systemu

  AIUI je to jiny kurz, nez ten z (pred?)minuleho roku? Bude to zase
velky blok, nebo jen klasickych 90 minut? Odpovida to v syllabu bodu
c. 1, nebo toho bude vice?

  Diky,

-- 
				Petr "Pasky" Baudis
	For every complex problem there is an answer that is clear,
	simple, and wrong.  -- H. L. Mencken

From niekt0 at hysteria.sk  Mon Dec 17 22:26:48 2012
From: niekt0 at hysteria.sk (niekt0)
Date: Mon, 17 Dec 2012 22:26:48 +0100
Subject: [Brmlab] prof. Warwick - 18.12 9:00, Karlovo namesti
In-Reply-To: <20121217211128.GB9138@machine.or.cz>
References: <20121217204350.GA27904@m>
 <20121217211128.GB9138@machine.or.cz>
Message-ID: <20121217212648.GA28132@m>

Je to iny kurz,
tento by mal byt viac filozoficky/teoreticky a menej.. implementacny.
Ale je dost pravdepodobne ze nieco co si uz pocul tam budes pocut znova.

Jedna prednaska uz bola, ale kedze som na nej nebol, 
neviem kde presne sa bude nadvazovat.

Myslim ze to budu 2x90min bloky s prestavkou, ale nerucim.

n.

On Mon, Dec 17, 2012 at 10:11:28PM +0100, Petr Baudis wrote:
>   Ahoj!
> 
> On Mon, Dec 17, 2012 at 09:43:50PM +0100, niekt0 wrote:
> > na poslednu chvilu, ale predsa:
> > Zajtra o 9:00 bude mat na Karlovom namesti prednasku Kevin Warwick,
> > vstup volny, kazdy kto ma zaujem je vitany.
> > Budova E, miestnost 112 (Vycichlova knihovna)
> > 
> > Prikladam paste z informacneho systemu
> 
>   AIUI je to jiny kurz, nez ten z (pred?)minuleho roku? Bude to zase
> velky blok, nebo jen klasickych 90 minut? Odpovida to v syllabu bodu
> c. 1, nebo toho bude vice?
> 
>   Diky,
> 
> -- 
> 				Petr "Pasky" Baudis
> 	For every complex problem there is an answer that is clear,
> 	simple, and wrong.  -- H. L. Mencken
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121217/38a608ce/attachment.pgp>

From ruza at ruza.eu  Tue Dec 18 22:05:20 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Tue, 18 Dec 2012 22:05:20 +0100
Subject: [Brmlab] nova warzone challenge
Message-ID: <50D0DA90.8090907@ruza.eu>

zdar,

pokud by to tu cetli nejaci hekeri nebo wannabies pak se jim na vedomost
dava ,ze se muzou nove vyradit se svymi prunikovymi schopnostmi proti
stroji waracle.brm kde je touzebne ocekava jista databazova instalace.

happy hacking a brm!
ruza

-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz


From ruza at ruza.eu  Wed Dec 19 20:00:42 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Wed, 19 Dec 2012 20:00:42 +0100
Subject: [Brmlab] Koncert proti konci sveta
Message-ID: <50D20EDA.8060601@ruza.eu>

Vazeni clenove,

mate-li zajem se zitra od 21h zucastnit akce Koncert proti konci sveta
[1] poradanem na prazskem Vystavisti napiste se do tabulky na wiki [2]
kolik kdo chcete vstupenek. Deadline kdy objednam vstupenky podle poctu
zajemcu je zitrejsi 10ta hod. Vstupenky budou k vyzvednuti pred
koncertem v brmlabu nebo cca v 21h+ pred Vystavistem.

Program:

Moderuje: L??a Angelovi?

Vystoup?: Support Lesbiens, Illustratosphere, Chinaski, The Tap Tap a
host? (frontmani ??inkuj?c?ch kapel a dal?? host?)

Host?: Ji?? Such?, Mari?n Bango, Million Dollar Mercedes Band, Lidov?
muzika Noti?ky

[1] http://www.koncertprotikoncisveta.cz/#!program
[2] https://www.brmlab.cz/event/koncert_proti_konci_sveta

Konec hlaseni
ruza


-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz

From ruza at ruza.eu  Thu Dec 20 01:21:57 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Thu, 20 Dec 2012 01:21:57 +0100
Subject: [Brmlab] club mate na akce ke konci roku
Message-ID: <50D25A25.4010606@ruza.eu>

ahoj,

protoze v brm mame ted neco pres 2 bedny club mate a mame v kalendari
jeste nekolik eventu, predevsim 29c3 congress everywhere a Silvestr, kde
by asi nemelo chybet, zjistoval jsem jak je to do konce roku s rozvozem.

Tedy vezte ze do konce roku lze realizovat dodavky tento patek, pripadne
pristi ctvrtek a patek. Vzhledem k tomu ze to zrejme vyjde na ten pristi
tyden kdy budu na 29c3 tak tuto info predavam a nejak zodpovedne s ni
nalozte.

brm, ruza

From axtheb at gmail.com  Thu Dec 20 12:15:24 2012
From: axtheb at gmail.com (=?UTF-8?B?VsOhY2xhdiAnQXgnIEjFr2xh?=)
Date: Thu, 20 Dec 2012 12:15:24 +0100
Subject: [Brmlab] club mate na akce ke konci roku
In-Reply-To: <50D25A25.4010606@ruza.eu>
References: <50D25A25.4010606@ruza.eu>
Message-ID: <CAFfS25d-cMapz-PZdYHnFmHqM3n2R2gWnwLk4caKPFOHF0sPoQ@mail.gmail.com>

Dne 20.12.2012 1:22 "Pavel Ruzicka" <ruza at ruza.eu> napsal(a):

> Tedy vezte ze do konce roku lze realizovat dodavky tento patek, pripadne

Ja budu v patek od rana do jedenacti v brm, tak to muzu prevzit. Jestli
teda je cash:)

Ax
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121220/2947cc9e/attachment.html>

From pasky at ucw.cz  Thu Dec 20 13:33:15 2012
From: pasky at ucw.cz (Petr Baudis)
Date: Thu, 20 Dec 2012 13:33:15 +0100
Subject: [Brmlab] club mate na akce ke konci roku
In-Reply-To: <CAFfS25d-cMapz-PZdYHnFmHqM3n2R2gWnwLk4caKPFOHF0sPoQ@mail.gmail.com>
References: <50D25A25.4010606@ruza.eu>
	<CAFfS25d-cMapz-PZdYHnFmHqM3n2R2gWnwLk4caKPFOHF0sPoQ@mail.gmail.com>
Message-ID: <20121220123315.GE9138@machine.or.cz>

On Thu, Dec 20, 2012 at 12:15:24PM +0100, V?clav 'Ax' H?la wrote:
> Dne 20.12.2012 1:22 "Pavel Ruzicka" <ruza at ruza.eu> napsal(a):
> 
> > Tedy vezte ze do konce roku lze realizovat dodavky tento patek, pripadne
> 
> Ja budu v patek od rana do jedenacti v brm, tak to muzu prevzit. Jestli
> teda je cash:)

Hmm, tohle uz jsem si neprecetl, ale club mate jsem objednal na nekdy po
16:30. To budu ja (na 95%), bude-li nas vic, nebudeme se vlka bat nic.

				Petr "Pasky" Baudis

From ruza at ruza.eu  Thu Dec 20 20:05:18 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Thu, 20 Dec 2012 20:05:18 +0100
Subject: [Brmlab] scanner
Message-ID: <50D3616E.4030503@ruza.eu>

ahoj,

vyzvedl jsem na vratnici HP scanner, ktery nam tam nekdo nechal. Tusite
kdo a za jakym ucelem?

dik, ruza

-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz


From rainbof at gmail.com  Thu Dec 20 20:25:11 2012
From: rainbof at gmail.com (Ondrej Beranek)
Date: Thu, 20 Dec 2012 20:25:11 +0100
Subject: [Brmlab] scanner
In-Reply-To: <50D3616E.4030503@ruza.eu>
References: <50D3616E.4030503@ruza.eu>
Message-ID: <CAAEb_Q0mdQB-f38ge=pHB7rxAt4nkXwzr2ZkHG-eYopt+cfnMw@mail.gmail.com>

Je voln? k pou?it?. Funguje. Zejtra rano ho zaskladnim.


Dne 20. prosince 2012 20:05 Pavel Ruzicka <ruza at ruza.eu> napsal(a):
> ahoj,
>
> vyzvedl jsem na vratnici HP scanner, ktery nam tam nekdo nechal. Tusite
> kdo a za jakym ucelem?
>
> dik, ruza
>
> --
> e-mail:  ruza at ruza.eu
> www:   http://ruza.eu
>      http://brmlab.cz
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab

From klusacek at atrey.karlin.mff.cuni.cz  Sun Dec 23 00:55:29 2012
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sun, 23 Dec 2012 00:55:29 +0100
Subject: [Brmlab] rozpouzdrovani
Message-ID: <20121222235529.GA5666@localhost.dummy.net>


Ahoj,

nahodou jsem nasel toto:

http://www.ultratecusa.com/rapidetch

Funguje to nejspis podobne jako ta Wensinkova metoda o ktere povidal Rostislav.
Cenu tam asi radeji nemaji.

Zajimavy je ovsem nasledujici graf:

http://www.ultratecusa.com/sites/default/files/ETCHEFFECT.jpg


Mejte se,

David


From ruza at ruza.eu  Sun Dec 23 00:43:22 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Sun, 23 Dec 2012 00:43:22 +0100
Subject: [Brmlab] Fwd: [hackerspaces] Ticket shop for OHM2013 is now open
In-Reply-To: <50D643D4.6050007@spiderwebz.nl>
References: <50D643D4.6050007@spiderwebz.nl>
Message-ID: <50D6459A.1050900@ruza.eu>

zacal prodej vstupenek na letni kemp

-------- Original Message --------
Date: Sun, 23 Dec 2012 00:35:48 +0100
From: Spider <spider at spiderwebz.nl>
To: Hackerspaces General Discussion List <discuss at lists.hackerspaces.org>


For those who missed it (how's it possible, one might ask), ticket shop
for OHM2013 is now open!

Get your tickets at: https://tickets.ohm2013.org/

If you don't know what OHM2013 is, please visit https://ohm2013.org/site/

-- 
Greetings,
Spider aka Sanne


0x6A350821 | 311D F74C DD64 2D2D 3334 B60B FFA8 15E1 6A35 0821
_______________________________________________
Discuss mailing list
Discuss at lists.hackerspaces.org
http://lists.hackerspaces.org/mailman/listinfo/discuss


From stick at gk2.sk  Sun Dec 23 19:31:05 2012
From: stick at gk2.sk (Pavol Rusnak)
Date: Sun, 23 Dec 2012 19:31:05 +0100
Subject: [Brmlab] flickr - fotky
Message-ID: <50D74DE9.1010701@gk2.sk>

Ahoj!

Flickr mal vianocnu akciu - aktivaciu Pro uctu na 3 mesiace zadarmo.
Zapol som to pre nas brmlab ucet (vyprsi to 23.3) tak dovtedy by bolo
dobre vytiahnut odtial fotky ktore mame len tam a naimportovat ich do
tej nasej brmlab galerie. Viem ze par galerii bolo iba na flickri a
nedalo sa k nim uz dostat (kedze free verzia flickru ukazuje iba
poslednych 200 fotiek).

Good luck and have fun!

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>

From noreply at brmlab.cz  Mon Dec 24 00:00:03 2012
From: noreply at brmlab.cz (noreply at brmlab.cz)
Date: Mon, 24 Dec 2012 00:00:03 +0100 (CET)
Subject: [Brmlab] Tydenni prehled udalosti / Weekly overview of events
Message-ID: <20121223230003.2C725A00C4@nat.brmlab.cz>

Udalosti v brmlabu tento tyden:
Events taking place in brmlab this week:

27.12.2012 - 30.12.2012 - http://brmlab.cz/event/29c3
27.12.2012 - 30.12.2012 - http://brmlab.cz/event/29c3_congress_everywhere
31.12.2012 20:00 - http://brmlab.cz/event/silvester2012

From algoldor at yahoo.com  Tue Dec 25 13:15:15 2012
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Tue, 25 Dec 2012 04:15:15 -0800 (PST)
Subject: [Brmlab] 29c3, cheese tasting come together
Message-ID: <1356437715.38700.YahooMailNeo@web112415.mail.gq1.yahoo.com>

Hi to all,
Just very short invitation to join a cheese tasting event at CCC congress organized by Food Hacking Base

http://events.ccc.de/congress/2012/wiki/Food_Hacking_Base


http://events.ccc.de/congress/2012/wiki/FHB_Cheese_Randevou? (around 8 cheeses in the "game" already for sure ...)


It is nice and relaxed style of come and get together, kind of potluck so you can meet different hackers for a chat and socilaize.

We will make exact time and date in tnext two days. You are welcome to bring any cheese which you like and you would like to share with others, olives, wine, dried tomatoes and other condiments are appreciated of course too! 

?
The ingred can be shared so no money change hands but donation options towards food hacking base budget and covering the expenses of participants are available too, check with us on the Food Hacking Base discuss 

http://lists.hackerspaces.org/mailman/listinfo/foodhackingbase

or get in touch with me or just join :-).

We hope to see you all and sorry for not updating the 29c3 wiki lately, I have major issues with access with anyone failing to sort it out ...

Sincerely from the CCC congress center Haburg,

Frantisek


Frantisek Algoldor Apfelbeck


biotechnologist&kvasir and hacker


http://www.frantisekapfelbeck.org


"There is no way to peace, peace is the way." Mohandas Karamchand Gandhi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121225/84c7f7fe/attachment.html>

From stick at gk2.sk  Wed Dec 26 15:45:16 2012
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 26 Dec 2012 15:45:16 +0100
Subject: [Brmlab] 29C3/EHSM @ brmlab
Message-ID: <50DB0D7C.6010703@gk2.sk>

Hi!

>From this Thursday (27.12) to Sunday (30.12), we'll be having a
"Congress Everywhere" session at brmlab, where we'll watch streams from
29C3 and EHSM conferences. Please indicate your interest in the doodle
below.

-- http://doodle.com/3i6t83zxmktd8py4 --

Each day is divided into three 5-hour-long blocks. These does not have
to be fill-in precisely (i.e. check all three if you plan to come that
day but you are not sure if you want to stay all day). Filling it in
thoroughly will help us with the planning, though.

Schedules:

* 29C3 - http://events.ccc.de/congress/2012/Fahrplan/
* EHSM - http://ehsm.eu/schedule.html

kthxbye and see you there!

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>

From info at kappi.cz  Wed Dec 26 16:29:46 2012
From: info at kappi.cz (Jan Kapoun)
Date: Wed, 26 Dec 2012 16:29:46 +0100
Subject: [Brmlab] flickr - fotky
In-Reply-To: <50D74DE9.1010701@gk2.sk>
References: <50D74DE9.1010701@gk2.sk>
Message-ID: <50DB17EA.8050307@kappi.cz>

BTW, muze mi nekdo rict, proc v te nasi slavne nove galerii jsou fotky,
ktere jsem nikomu nedovolil ani vytvorit a uz vubec ne zverejnit?

diky kappi

Dne 23.12.12 19:31, Pavol Rusnak napsal(a):
> Ahoj!
>
> Flickr mal vianocnu akciu - aktivaciu Pro uctu na 3 mesiace zadarmo.
> Zapol som to pre nas brmlab ucet (vyprsi to 23.3) tak dovtedy by bolo
> dobre vytiahnut odtial fotky ktore mame len tam a naimportovat ich do
> tej nasej brmlab galerie. Viem ze par galerii bolo iba na flickri a
> nedalo sa k nim uz dostat (kedze free verzia flickru ukazuje iba
> poslednych 200 fotiek).
>
> Good luck and have fun!
>


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3736 bytes
Desc: Elektronicky podpis S/MIME
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121226/300a741b/attachment.bin>

From rado at rado1.cz  Wed Dec 26 17:31:12 2012
From: rado at rado1.cz (Rado1)
Date: Wed, 26 Dec 2012 17:31:12 +0100
Subject: [Brmlab] flickr - fotky
In-Reply-To: <50DB17EA.8050307@kappi.cz>
References: <50D74DE9.1010701@gk2.sk>
 <50DB17EA.8050307@kappi.cz>
Message-ID: <20121226163112.GB27992@rado1.cz>

Netusim, o ake fotky sa jedna, ale nasledujuce vychadza z predpokladu,
ze sa jedna o fotky ludi z brmlab akcie:

- fotenie ludi nie je defaultne zakazane. Nepredpokladam, ze sa fotilo
  v sukromnom byte, ale vo viac-menej verejnych priestoroch brmlabu.
  V takom pripade moze kazdy fotit, koho chce, pokial foteny explicitne
  neda najavo nesuhlas s fotenim. Nesuhlas moze byt vyjadreny
  napriklad aj zavrtenim hlavou, nemusi byt slovny. Je potom na etike
  fotografa, aby takyto nesuhlas respektoval.

- publikovanie fotiek vyzaduje suhlas ludi na fotografovanie, pokial to nie
  je reportazna fotografia. Reportazna fotografia musi byt zviazana s
  konkretnou akciou, co moze byt dosiahnute nazvom a datumom brmlab akcie
  vo flickr galerii. Reportazna fotografia nevyzaduje suhlas ("model
  release"). Vie si niekto predstavit, ako sa ziada suhlas niekolko tisic
  ludi z reportaznej fotky demonstracie?

- pokial si niekto nezela, aby jeho fotka bola zverejnena (napriek tomu,
  ze nevyjadril nesuhlas s fotenim a jedna sa o reportaznu fotku) poziada
  dodatocne o jej stiahnutie. Vystavovatel by mal taketo zelanie
  respektovat. Neznamena to, ze musi. Nikto nebude stahovat publikovanie
  fotky z koncertu Rolling Stones len preto, ze jedna hlava z davu nebude
  suhlasit s publikovanim (ale produkcia koncertov s takymto pocita - vid
  nasledujuci bod).

- doporucujem brmlabu v buducnosti pri verejnych akciach uvadzaj viditelne
  pri vstupe, ze pocas akcie mozu byt ludia foteni pre archivne ucely
  brmlabu. Osoba, ktora s tym nesuhlasi, ma moznost nevstupit do priestorov
  akcie. U prednasajucich doporucujem to uviest ako sucast "kontraktu".

- taketo fotky nesmu byt pouzite na komercne ucely bez pisomneho "model
  release".

- pokial sa v tomto pripade jedna o uplne ine fotky, berte to len ako moje
  2c rady do buducna...

-- 
Rado1

On Wed, Dec 26, 2012 at 04:29:46PM +0100, Jan Kapoun wrote:
#> BTW, muze mi nekdo rict, proc v te nasi slavne nove galerii jsou fotky,
#> ktere jsem nikomu nedovolil ani vytvorit a uz vubec ne zverejnit?
#> 
#> diky kappi
#> 
#> Dne 23.12.12 19:31, Pavol Rusnak napsal(a):
#> > Ahoj!
#> >
#> > Flickr mal vianocnu akciu - aktivaciu Pro uctu na 3 mesiace zadarmo.
#> > Zapol som to pre nas brmlab ucet (vyprsi to 23.3) tak dovtedy by bolo
#> > dobre vytiahnut odtial fotky ktore mame len tam a naimportovat ich do
#> > tej nasej brmlab galerie. Viem ze par galerii bolo iba na flickri a
#> > nedalo sa k nim uz dostat (kedze free verzia flickru ukazuje iba
#> > poslednych 200 fotiek).
#> >
#> > Good luck and have fun!
#> >
#> 
#> 



#> _______________________________________________
#> Brmlab mailing list
#> Brmlab at brmlab.cz
#> http://brmlab.cz/cgi-bin/mailman/listinfo/brmlab


From info at kappi.cz  Wed Dec 26 20:44:05 2012
From: info at kappi.cz (Jan Kapoun)
Date: Wed, 26 Dec 2012 20:44:05 +0100
Subject: [Brmlab] flickr - fotky
In-Reply-To: <20121226163112.GB27992@rado1.cz>
References: <50D74DE9.1010701@gk2.sk> <50DB17EA.8050307@kappi.cz>
	<20121226163112.GB27992@rado1.cz>
Message-ID: <50DB5385.5080403@kappi.cz>

Tohle je myslim docela fajn shrnuti.
U me se konkretne jedna o vnitrek meho auta, ktery si nekdo nafotil na
akci BRMradia u Hradce.
To bych rad stahl.

kappi

Dne 26.12.12 17:31, Rado1 napsal(a):
> Netusim, o ake fotky sa jedna, ale nasledujuce vychadza z predpokladu,
> ze sa jedna o fotky ludi z brmlab akcie:
>
> - fotenie ludi nie je defaultne zakazane. Nepredpokladam, ze sa fotilo
>   v sukromnom byte, ale vo viac-menej verejnych priestoroch brmlabu.
>   V takom pripade moze kazdy fotit, koho chce, pokial foteny explicitne
>   neda najavo nesuhlas s fotenim. Nesuhlas moze byt vyjadreny
>   napriklad aj zavrtenim hlavou, nemusi byt slovny. Je potom na etike
>   fotografa, aby takyto nesuhlas respektoval.
>
> - publikovanie fotiek vyzaduje suhlas ludi na fotografovanie, pokial to nie
>   je reportazna fotografia. Reportazna fotografia musi byt zviazana s
>   konkretnou akciou, co moze byt dosiahnute nazvom a datumom brmlab akcie
>   vo flickr galerii. Reportazna fotografia nevyzaduje suhlas ("model
>   release"). Vie si niekto predstavit, ako sa ziada suhlas niekolko tisic
>   ludi z reportaznej fotky demonstracie?
>
> - pokial si niekto nezela, aby jeho fotka bola zverejnena (napriek tomu,
>   ze nevyjadril nesuhlas s fotenim a jedna sa o reportaznu fotku) poziada
>   dodatocne o jej stiahnutie. Vystavovatel by mal taketo zelanie
>   respektovat. Neznamena to, ze musi. Nikto nebude stahovat publikovanie
>   fotky z koncertu Rolling Stones len preto, ze jedna hlava z davu nebude
>   suhlasit s publikovanim (ale produkcia koncertov s takymto pocita - vid
>   nasledujuci bod).
>
> - doporucujem brmlabu v buducnosti pri verejnych akciach uvadzaj viditelne
>   pri vstupe, ze pocas akcie mozu byt ludia foteni pre archivne ucely
>   brmlabu. Osoba, ktora s tym nesuhlasi, ma moznost nevstupit do priestorov
>   akcie. U prednasajucich doporucujem to uviest ako sucast "kontraktu".
>
> - taketo fotky nesmu byt pouzite na komercne ucely bez pisomneho "model
>   release".
>
> - pokial sa v tomto pripade jedna o uplne ine fotky, berte to len ako moje
>   2c rady do buducna...
>


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3736 bytes
Desc: Elektronicky podpis S/MIME
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20121226/6c524c2a/attachment.bin>

From stick at gk2.sk  Wed Dec 26 20:52:27 2012
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 26 Dec 2012 20:52:27 +0100
Subject: [Brmlab] flickr - fotky
In-Reply-To: <50DB5385.5080403@kappi.cz>
References: <50D74DE9.1010701@gk2.sk> <50DB17EA.8050307@kappi.cz>
	<20121226163112.GB27992@rado1.cz> <50DB5385.5080403@kappi.cz>
Message-ID: <50DB557B.20803@gk2.sk>

On 26/12/12 20:44, Jan Kapoun wrote:
> Tohle je myslim docela fajn shrnuti.
> U me se konkretne jedna o vnitrek meho auta, ktery si nekdo nafotil na
> akci BRMradia u Hradce.
> To bych rad stahl.

Jenda uz to (nejak) riesi ale mam pocit ze to nedoriesil uplne ...

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>

From stick at gk2.sk  Fri Dec 28 21:04:33 2012
From: stick at gk2.sk (Pavol Rusnak)
Date: Fri, 28 Dec 2012 21:04:33 +0100
Subject: [Brmlab] Stellaris Workshop
Message-ID: <50DDFB51.3050206@gk2.sk>

Ahoj!

Davam do pozornosti akciu, ktora bude v brmlabe 17.1 o 19:00.

Stellaris Launchpad je vyvojarska doska od Texas Instruments, v podstate
?Arduino na Steroidoch?. Preberieme si instalaciu toolchainu a
flashovacich nastrojov, pracu s Arduino-like IDE s nazvom Energia a
ukazeme si nejake zakladne priklady ako s doskou pracovat ...

Na mieste budu k dispozicii dosky k zakupeniu za 350 CZK. Viac o akcii
sa docitate na https://brmlab.cz/event/stellaris_workshop

Tesim sa na vas!

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>

From klokanek at eldar.cz  Sat Dec 29 23:57:01 2012
From: klokanek at eldar.cz (Honza Klokanek Sipek)
Date: Sat, 29 Dec 2012 23:57:01 +0100
Subject: [Brmlab] a2 - tematicke cislo "pod kontrolou" (last call)
Message-ID: <20121229225701.GB43214@eldar.cz>

cau,
pro casopis a2 pomahame se shaddackem davat dohromady tema cisla na leden,
ktere je "pod kontrolou". budeme tam mit jeden pomerne paranoidni esej
"jeden den pod kontrolou" o vsemoznych aspektech sledovani, pak snad
rozhovor + shaddackuv clanek o traffic analysis a nejaky drobnosti k tomu. 

nasel by se nekdo, kdo by mel namet na clanek, nebo chtel napsat nebo by
vedel o nekom, kdo by neco zajimaveho napsal? 
celkem to uz hori. 

cituju redaktorku a2:

"[napsal by nekdo neco k] wikileaks nebo k tomu arabskemu jaru? to by me
zajimalo asi uplne nejvic, protoze o tom, jakou roli v nem hral internet se
hodne mlzilo vsude, ale nic o tom, jak to opravdu probihalo, jsme se
nedozvedeli.  napada te, koho dalsiho k tomu cislu oslovit?  anonymita neni
problem, ani "nebezpecne" informace...  Pripadne - muzeme i neco prelozit,
pokud vas napada nejakej zasadni text z posledni doby k tematu, nejlip z aj,
ale i jiny jazyky zvladneme prelozit.  diky za cokoli"

a2 je tistenej casopis "pro akademiky i pankace", ma celkem zajimavy
ctenare, prevazne z chytrejch alternativnich elit, neni primarne zmerenej na
IT problemy, ale mozna by to prave proto byla zajimava prilezitost vytahnout
vase temata do obecnejsi znamosti i mimo uzavrenou komunitu. tj. neco, o cem
by se melo vedet. vyhoda je, ze se nebojej tisknout radikalni veci a ze jsou
dost otevreny. 

napada vas neco? 

dik za reakci

cau

klo



-- 
<(o)>..klokanek...............................................................  
     (honza sipek) * klokanek (zavinac) eldar.cz * ICQ#281 154 266
        skype: brouci.tykadylko  jabber: klokanek (zavinac) jabber.cz
                 	tel.: +420 776 817 817 
..................................... . ..        ..   . .  
Zasek do zivyho (kniha) ----- ------> http://eldar.cz/kangaroo/zasek_do_zivyho



From noreply at brmlab.cz  Mon Dec 31 00:00:02 2012
From: noreply at brmlab.cz (noreply at brmlab.cz)
Date: Mon, 31 Dec 2012 00:00:02 +0100 (CET)
Subject: [Brmlab] Tydenni prehled udalosti / Weekly overview of events
Message-ID: <20121230230002.7E401A0A76@nat.brmlab.cz>

Udalosti v brmlabu tento tyden:
Events taking place in brmlab this week:

31.12.2012 20:00 - http://brmlab.cz/event/silvester2012
4.1.2013 18:00 2k6 - http://meetings.2600.cz/

From ruza at ruza.eu  Mon Dec 31 01:06:47 2012
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Mon, 31 Dec 2012 01:06:47 +0100
Subject: [Brmlab] Tydenni prehled udalosti / Weekly overview of events
In-Reply-To: <20121230230002.7E401A0A76@nat.brmlab.cz>
References: <20121230230002.7E401A0A76@nat.brmlab.cz>
Message-ID: <50E0D717.6010201@ruza.eu>

na by mely jeste byt 3.1.2013 Lightning talks. naplni-li se program :)

On 12/31/2012 12:00 AM, noreply at brmlab.cz wrote:
> Udalosti v brmlabu tento tyden:
> Events taking place in brmlab this week:
> 
> 31.12.2012 20:00 - http://brmlab.cz/event/silvester2012
> 4.1.2013 18:00 2k6 - http://meetings.2600.cz/


-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz