From stick at gk2.sk  Fri Apr  1 01:03:43 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Fri, 01 Apr 2011 01:03:43 +0200
Subject: [Brmlab] Bedna team
In-Reply-To: <20110330185130.GB3258@machine.or.cz>
References: <20110330185130.GB3258@machine.or.cz>
Message-ID: <4D95084F.3000305@gk2.sk>

On 30/03/11 20:51, Petr Baudis wrote:
>   Postavme brmlabi team! Otevren vsem priznivcum brmlabu, predchozi
> zkusenosti se sifrovackami ani dobra znalost Prahy nejsou nutne. Napiste
> mail, chcete-li se zucastnit. (Dobre napady na nazev tymu take uvitame.)

Ja pojdem tradicne so svojim teamom Absinthentov :-)

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From ruza at ruza.eu  Fri Apr  1 02:22:06 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Fri, 01 Apr 2011 02:22:06 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
Message-ID: <4D951AAE.70407@ruza.eu>

http://rover.ms.mff.cuni.cz/pipermail/announce/2011-April/000032.html

-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz


From tomas at mudrunka.cz  Fri Apr  1 05:19:50 2011
From: tomas at mudrunka.cz (=?UTF-8?Q?Tom=C3=A1=C5=A1_Mudru=C5=88ka?=)
Date: Fri, 01 Apr 2011 05:19:50 +0200
Subject: [Brmlab] PneuComputer - stavebnice
In-Reply-To: <20110401002522.GA1630@localhost.dummy.net>
References: <20110401002522.GA1630@localhost.dummy.net>
Message-ID: <1b437521a79d216d3840a54e60b2bbcc@harvie.cz>

Ahoj,
na stredni sme meli stavebnici (specialne urcenou pro vyuku pneumaticky
automatizace) a fungovalo to prakticky jako vetsina elektronickych
stavebnic. na takovejch velkejch stolech sis skladal krabicky a propojoval
je hadickama, v rohu stal kompresor a vsechno to napajel. asi tam byly i
soucastky na stavbu "pocitace" (hradla) a dalsi se daly postavit, protozes
tam mel pisty a pneumaticky spinace/prepinace/zesilovace, ktery se s nima
daly ovladat. staveli sme ruzny astabilni multivibratory, synchronizovali
dva pisty tak aby do sebe nenarazili, etc...
bohuzel uz nevim jaka firma to dodala.

jinak rozhodne nezapominej na zesilovani vsude kde se da, pneumatika je na
to mnohem nachylnejsi nez elektronika a ani primitivni obvod neudelas bez
toho, abys do nej vsude (v kazdym hradlu, spinaci,...) znovu a znovu
dodaval tlak...

On Fri, 1 Apr 2011 02:25:22 +0200, "David Klusacek"
<klusacek at atrey.karlin.mff.cuni.cz> wrote:
> Ahoj,
> 
> vzhledem k dnesnimu datu jsem se osmelil zeptat se, zda by nemel nekdo
> zajem
> se mnou pracovat na nasledujicim, tak trochu vystrednim, projektu.
> 
> Rikal jsem si, ze by se RepRap dal mozna pouzit k vytisteni vzduchem
> pohaneneho CPU a pameti. Predbezne odhaduju, ze by melo by byt mozne
> dosahnout rychlosti radove asi 1000 instrukci za sekundu s 32bitovou ALU
a
> s
> asi 10 KB pameti v krychli o hrane 20 cm. Pocitac by se pohanel
stlacenym
> vzduchem (vycistenym a vysusenym) z bomby nebo z kompresoru.
> 
> Detaily jeste nemam rozmyslene, ale napriklad takto (pomoci trubek ve
tvaru
> Y) jde udelat pamet jednoho bitu: 
> 
>          power
>        |  |
>        |  |
>    ====    === control
>       /    \
>     /   /\   \
>    out1    out2
> 
> Kdyz se k power privede tlakovy vzduch, tak se ten prilne k jedne ze
sten a
> vychazi z out1 xor z out2 a pomoci "psouknuti" z trubek control zleva do
> prava nebo naopak to lze prepinat. Podobne se da udelat NAND a z nej uz
lze
> postavit zbytek. Nevyhoda je, ze je to pomaly (omezeny rychlosti zvuku
ve
> vzduchu -- kdyby se pouzilo helium tak by se rychlost zvysila pouze 3*
> takze
> to asi nema cenu -- rozhodne cim mensi prvky tim bliz k sobe a tim
> rychlejsi
> pocitac ale jsme omezeni presnosti RepRapu a pro velmi tenke potrubi by
> mohla byt viskozita vzduchu uz problem).
> 
> Vyhoda je ze si pocitac muzeme navrhnout cely sami jak se nam libi a
kdyz
> by
> se vytiskl pruhlednym plastem tak by bylo videt skrz, coz by se dalo
> pouzit pro vyuku, nebo alespon popularizaci.
> 
> Dalsi prakticka vyhoda je, ze by byl (slovy robota z futuramy)
`impervious
> to our most powerful magnetic fields (yet in the end it would succumb to
a
> harmless sharpened stick)'. Takze mozna, ze by takovy pocitac i treba
nasel
> skutecne vyuziti v radiaci zamorenem prostredi (i kdyz me nenapada co by
> tam
> mohl pri tak nizkem vykonu uzitecneho pocitat).
> 
> Predstavuju si, ze do ROMky by se naprogramoval interpret FORTHu a jedna
> stena pameti RAM by se udelala pruhledna a do OUT2 by se dala nejaka
> kulicka
> ktera se otoci spravnou barvou ven kdyz to na ni fouka, takze by se to
> chovalo jako obrazovka. Klavesnice by tez sla vyrobit vduchova a pak by
> jeste bylo potreba mit nejake elektromechanicke zarizeni ktere by
emulovalo
> seriovou linku na rekneme 600 Bd, aby bylo odkud nacist a kam ukladat
data,
> ktera maji prezit vypnuti stroje.
> 
> Idealni by bylo, kdyby se podarilo na RepRapu vytisknou prepinaci
element
> ve
> velikosti (dovnitr krychle) 2*2*2 mm^3. Pak by jich mohlo v krychli
> pocitace
> byt 10^6, ve skutecnosti rekneme 10^5, protoze nekde musi vest sbernice,
> napajeni, vyfuk a nosne prvky. Ale i 10^5 by melo pro konstrukci
takoveho
> jednoducheho pocitace stacit.
> 
> Ze zacatku bych zkoumal jestli to vubec bude fungovat kdyz RepRap
neudela
> vnitrni steny trubek uplne hladke, a jak moc to pujde zmensit. Pak
bychom
> treba mohli postavit oscilator, NAND, pamet, citac, scitacku, ALU a
> postupne
> zbytek CPU a pameti. 
> 
> Pochopitelne bych to nechtel cele delat rucnim zadavanim tvaru, chtel
bych
> vytvorit neco jako kompilator z VHDL nebo Verilogu do 3D popisu. Ten
> kompilator by mel zohlednit fyzikalni omezeni (tlakova ztrata), pripadne
> sam
> generovat obnovovaci zesilovace, mel by umet pocitat kde bude jaka
teplota
> pri expanzi plynu a jak dlouho poleti signal potrubim a jestli toto
> zpozdeni
> uz nezpusobi tzv. hazard, atd.
> 
> Zatim je to jen blazniva myslenka a nevim jestli to nekoho bude zajimat,
na
> druhou stranu nevim, ze by se v soucasnosti nekdo o neco podobneho
pokousel
> (v minulosti nejake pneumaticke pocitace zkonstrovany byly, ale z
> diskretnich prvku, ze by ho nekdo tiskl na 3D tiskarne jsem neslysel). 
> 
> Mohl by to byt projekt (alespon ze zacatku) unikatni pro brmlab.
> 
> Tak pokud ma nekdo zajem, ozvete se.
> 
> 
> David
> 
> 
> _______________________________________________
> Announce mailing list
> Announce at v.or.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/announce

-- 
S pozdravem
Best regards
   Tom?? Mudru?ka - Spoje.net / Arachne Labs

XMPP/Jabber: harvie at jabbim.cz, ICQ: 283782978


From chidori at emptytriangle.com  Fri Apr  1 11:32:40 2011
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Fri, 1 Apr 2011 11:32:40 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <4D951AAE.70407@ruza.eu>
References: <4D951AAE.70407@ruza.eu>
Message-ID: <AANLkTi=72ckYz=hc6qL6qDwaAYmP_bUCnYpR=oEi+6uV@mail.gmail.com>

To je uplne uzasny napad! Bol si niekedy davnejsie v technickom muzeu
vo viedni? mavali tam na vstupnych schodoch binarnu kalkulacku
zalozenu na trubkach z vodou ktra bola v podstate pohanana
gravitaciou. Ten vzduch je ale kazdopadne este viac steampunk!
Urcite by som sa do projektu rada zapojila, napriklad by som sa rada
naucila modelovanie 3D objektov na RepRap... ale rada pomozem s
cimkolvek inym co bude v mojich (bohuzial hodne obmedzenych)
schopnostiach!

chido

On Fri, Apr 1, 2011 at 2:22 AM, Pavel Ruzicka <ruza at ruza.eu> wrote:
> http://rover.ms.mff.cuni.cz/pipermail/announce/2011-April/000032.html
>
> --
> e-mail: ?ruza at ruza.eu
> www: ? http://ruza.eu
> ? ? http://brmlab.cz
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>



-- 
"It is not birth, marriage, or death, but gastrulation which is truly
the most important time in your life."? ? Lewis Wolpert


From kxt at jenikovo.com  Fri Apr  1 12:32:18 2011
From: kxt at jenikovo.com (Jan Svec)
Date: Fri, 01 Apr 2011 12:32:18 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <4D951AAE.70407@ruza.eu>
References: <4D951AAE.70407@ruza.eu>
Message-ID: <4D95A9B2.3050104@jenikovo.com>

On 04/01/2011 02:22 AM, Pavel Ruzicka wrote:
> http://rover.ms.mff.cuni.cz/pipermail/announce/2011-April/000032.html
>
:))))


From blackhead at blackhead.cz  Sat Apr  2 00:38:15 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sat, 2 Apr 2011 00:38:15 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <4D951AAE.70407@ruza.eu>
Message-ID: <BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>

To je kuul! Nevim, nakolik je takovy navrh myslen jako prvodubnovy, ale je
to v kazdem pripade usmevne i uchvatne zaroven. Ale v pripade skutecne
realizace se hlasim jako logik-architekt.

Proc by tohle nemohl byt nas Brmbit computer? Klidne pneu, hlavne ze bude
fachat... :-D

BH

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
Pavel Ruzicka
Sent: Friday, April 01, 2011 2:22 AM
To: Prague hackerspace
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt


http://rover.ms.mff.cuni.cz/pipermail/announce/2011-April/000032.html

--
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From gnd at itchybit.org  Sat Apr  2 01:10:35 2011
From: gnd at itchybit.org (gnd at itchybit.org)
Date: Sat, 2 Apr 2011 01:10:35 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
References: <BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
Message-ID: <188a83db1a1512099c8ea2366e90e1d9.squirrel@mail.multiplace.sk>

Ahoj,

je to krasny napad. Ja mam skusenosti s 3Dckom od cca zakladnej skoly tak
by som mohol pomoct s pripravou modelu pre tlaciaren. Idealne by to asi
bolo nejako podla nejakeho vstupu naskriptit a potom odladit alebo tak.
Kludne by som toto robil s nejakymi dalsimi ludmi a tak.

V kazdom pripade rad pomozem. S navrhom logickych spojov nemam ziadne
skusenosti ale ucim sa rychlo :)

pa,

gnd/

> To je kuul! Nevim, nakolik je takovy navrh myslen jako prvodubnovy, ale je
> to v kazdem pripade usmevne i uchvatne zaroven. Ale v pripade skutecne
> realizace se hlasim jako logik-architekt.
>
> Proc by tohle nemohl byt nas Brmbit computer? Klidne pneu, hlavne ze bude
> fachat... :-D
>
> BH
>
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
> Of
> Pavel Ruzicka
> Sent: Friday, April 01, 2011 2:22 AM
> To: Prague hackerspace
> Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
>
>
> http://rover.ms.mff.cuni.cz/pipermail/announce/2011-April/000032.html
>
> --
> e-mail:  ruza at ruza.eu
> www:   http://ruza.eu
>      http://brmlab.cz
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>




From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr  2 02:20:02 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 2 Apr 2011 02:20:02 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <188a83db1a1512099c8ea2366e90e1d9.squirrel@mail.multiplace.sk>
References: <BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
	<188a83db1a1512099c8ea2366e90e1d9.squirrel@mail.multiplace.sk>
Message-ID: <20110402002002.GB15617@localhost.dummy.net>


Ahoj,

3D zkusenosti urcite vyuzijeme, zejmena ze zacatku, kdy se budou zkouset
ruzne geometrie prepinacich soucastek. Pak se z nich udela `knihovna' a
VHDL->3D kompilator uz konkretni tvar vyrobi (v idealnim pripade) vicemene
automaticky podle VHDL zdrojaku ve kterem bude logicky popis pocitace.


> Ahoj,
> 
> je to krasny napad. Ja mam skusenosti s 3Dckom od cca zakladnej skoly tak
> by som mohol pomoct s pripravou modelu pre tlaciaren. Idealne by to asi
> bolo nejako podla nejakeho vstupu naskriptit a potom odladit alebo tak.
> Kludne by som toto robil s nejakymi dalsimi ludmi a tak.
> 
> V kazdom pripade rad pomozem. S navrhom logickych spojov nemam ziadne
> skusenosti ale ucim sa rychlo :)
> 
> pa,
> 



From ondrej.mikle at gmail.com  Sat Apr  2 03:02:27 2011
From: ondrej.mikle at gmail.com (Ondrej Mikle)
Date: Sat, 02 Apr 2011 03:02:27 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <20110402002002.GB15617@localhost.dummy.net>
References: <BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>	<188a83db1a1512099c8ea2366e90e1d9.squirrel@mail.multiplace.sk>
	<20110402002002.GB15617@localhost.dummy.net>
Message-ID: <4D9675A3.8040801@gmail.com>

Jak tu vidim VHDL, mozem ponuknut jednu vec - vedel by som (najskor) zohnat
licenciu na soft, ktory vie VHDL/Verilog-A/Verilog-AMS/MAST (plus CMX, co je
custom jazyk, ktory je "kartezskym sucinom" featur tych zmienenych jazykov),
simulaciu, vizualizaciu, editor toplogie (robil som v tej firme a este mi cosi
dlzia).

Datasheet (trocha starsi):
http://tekmarx.com/documents/lynguent_modlyng_datasheet_200806.pdf

Ak by o to mal niekto zaujem, napiste; akurat licencia je viazana na jeden komp.

OM

On 04/02/11 02:20, David Klusacek wrote:
> 
> Ahoj,
> 
> 3D zkusenosti urcite vyuzijeme, zejmena ze zacatku, kdy se budou zkouset
> ruzne geometrie prepinacich soucastek. Pak se z nich udela `knihovna' a
> VHDL->3D kompilator uz konkretni tvar vyrobi (v idealnim pripade) vicemene
> automaticky podle VHDL zdrojaku ve kterem bude logicky popis pocitace.
> 
> 
>> Ahoj,
>>
>> je to krasny napad. Ja mam skusenosti s 3Dckom od cca zakladnej skoly tak
>> by som mohol pomoct s pripravou modelu pre tlaciaren. Idealne by to asi
>> bolo nejako podla nejakeho vstupu naskriptit a potom odladit alebo tak.
>> Kludne by som toto robil s nejakymi dalsimi ludmi a tak.
>>
>> V kazdom pripade rad pomozem. S navrhom logickych spojov nemam ziadne
>> skusenosti ale ucim sa rychlo :)
>>
>> pa,
>>
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 



From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr  2 02:14:04 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 2 Apr 2011 02:14:04 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
References: <4D951AAE.70407@ruza.eu>
	<BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
Message-ID: <20110402001404.GA15617@localhost.dummy.net>



> To je kuul! Nevim, nakolik je takovy navrh myslen jako prvodubnovy, ale je

Bylo to mysleno jako vtip jen v pripade, ze by se krome me nenasel nikdo jiny
s chuti ho uskutecnit.

> to v kazdem pripade usmevne i uchvatne zaroven. Ale v pripade skutecne
> realizace se hlasim jako logik-architekt.

Beru!  Umis VHDL nebo Verilog? Chtel bych napsat neco jako kompilator z
nejakeho z techto 2 jazyku do 3D popisu. Ale prakticky jsem VHDL ani Verilog
nikdy nepouzival, takze pokud bys v nem byl sbehly tak by se to velmi
hodilo.

Vyhoda by byla ze stejny VHDL zdrojak by se dal snadno vypalit do hradloveho
pole, takze bychom mohli mit i elektrickou (mnohem rychlejsi (nejmin
10000*)) variantu toho pocitace. Taky existuji ruzne VHDL simulatory.
Na urovni logiky by se to simulovalo v nich.


> Proc by tohle nemohl byt nas Brmbit computer? Klidne pneu, hlavne ze bude

Jasne, bude to verze Brmbit-Air ;)



From sargonout at gmail.com  Sat Apr  2 03:21:57 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Sat, 2 Apr 2011 03:21:57 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <20110402001404.GA15617@localhost.dummy.net>
References: <4D951AAE.70407@ruza.eu>
	<BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
	<20110402001404.GA15617@localhost.dummy.net>
Message-ID: <BANLkTikAj0StrvoxGL2i5rqGTAQs4Pzsbw@mail.gmail.com>

pre inspiraciu ...
neni to sice pneumaticke ... ale je to pekne
http://www.youtube.com/watch?v=WcR7U2tuNoY

Dne 2. dubna 2011 2:14 David Klusacek
<klusacek at atrey.karlin.mff.cuni.cz>napsal(a):

>
>
> > To je kuul! Nevim, nakolik je takovy navrh myslen jako prvodubnovy, ale
> je
>
> Bylo to mysleno jako vtip jen v pripade, ze by se krome me nenasel nikdo
> jiny
> s chuti ho uskutecnit.
>
> > to v kazdem pripade usmevne i uchvatne zaroven. Ale v pripade skutecne
> > realizace se hlasim jako logik-architekt.
>
> Beru!  Umis VHDL nebo Verilog? Chtel bych napsat neco jako kompilator z
> nejakeho z techto 2 jazyku do 3D popisu. Ale prakticky jsem VHDL ani
> Verilog
> nikdy nepouzival, takze pokud bys v nem byl sbehly tak by se to velmi
> hodilo.
>
> Vyhoda by byla ze stejny VHDL zdrojak by se dal snadno vypalit do
> hradloveho
> pole, takze bychom mohli mit i elektrickou (mnohem rychlejsi (nejmin
> 10000*)) variantu toho pocitace. Taky existuji ruzne VHDL simulatory.
> Na urovni logiky by se to simulovalo v nich.
>
>
> > Proc by tohle nemohl byt nas Brmbit computer? Klidne pneu, hlavne ze bude
>
> Jasne, bude to verze Brmbit-Air ;)
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/1a31eaaa/attachment.html>

From pisa at cmp.felk.cvut.cz  Sat Apr  2 08:22:27 2011
From: pisa at cmp.felk.cvut.cz (Pavel Pisa)
Date: Sat, 2 Apr 2011 08:22:27 +0200
Subject: [Brmlab] =?iso-8859-2?q?Fwd=3A_Zb=FDvaj=EDc=ED_m=EDsta_na_univerz?=
 =?iso-8859-2?q?itn=ED_jednodenn=ED_=B9kolen=ED_firmy_TexasInstruments_na_?=
 =?iso-8859-2?q?v=FDvojov=FDch_desk=E1ch_MSP-EXP430G2_a_EKS-LM3S8962?=
Message-ID: <201104020822.27122.pisa@cmp.felk.cvut.cz>

Zdrav?m kolegy z MFF a BRMLAB,

Spole?nost TexasInstruments po??d? ve dnech 4.4. a 5.4. jednodenn? univerzitn? 
kurzy na v?vojov?ch kytech, kter? registrovan?m ??astn?k?m poskytne k u??v?n? 
pro ??ely v?uky a akademick?ch projekt?.

V tuto chv?li st?le je?t? zb?v? n?kolik m?st na ?kolen? s MCU MSP430
a nejsp?? i n?kolik m?st na ?kolen? a kity Stellaris na b?zi j?dra
ARM Cortex-M3. Je dos mo?n?, ?e by n?koho z va?eho okol? mohla nab?dka
zaujmout a spl?ujete podm?nky.

Na ?kolen? se mohou v tuto chv?li je?t? p?ihl?sit postgradu?ln? studenti, 
vedouc? p?edm?t? a ?e?itel? univerzitn?ch projekt?. Z jednoho odd?len? se 
mohou z??astnit maxim?ln? dva deleg?ti.

Pokud m?te z?jem a spl?ujete p?edchoz? podm?nky, vypl?te, pros?m, ?daje
na n?sleduj?c? str?nce nebo do p?ilo?en?ho ( DOC :-( ) dokumentu a ode?lete
je e-mailem na adresu Adam Pavey uvedenou na str?nce

http://e2e.ti.com/group/university_zone/european_university_program/f/258/t/96860.aspx

4.4.2011 Launchpad MSP-EXP430G2 (16-bit mikrokontroler MSP430)
<http://focus.ti.com/docs/toolsw/folders/print/msp-exp430g2.html>

5.4.2011 Stellaris EKS-LM3S8962 (32-bit mikrokontroler)
<http://focus.ti.com/docs/toolsw/folders/print/eks-lm3s8962.html>

M?sto ?kolen?: Budova ?VUT FEL na Karlov? n?m?st?

S pozdravem,

                Pavel P??a
    e-mail:     pisa at cmp.felk.cvut.cz
    www:        http://cmp.felk.cvut.cz/~pisa
    university: http://dce.fel.cvut.cz/

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Workshop Registration Form (Czech Republic_Poland) April 2011_Name.doc
Type: application/msword
Size: 535040 bytes
Desc: not available
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/55c486c3/attachment.doc>

From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr  2 10:17:41 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 2 Apr 2011 10:17:41 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <BNEBJCHIKOICJLAPBAPHGELIDLAA.blackhead@blackhead.cz>
References: <20110402001404.GA15617@localhost.dummy.net>
	<BNEBJCHIKOICJLAPBAPHGELIDLAA.blackhead@blackhead.cz>
Message-ID: <20110402081741.GA577@localhost.dummy.net>


> Ehm... Ne.

To vubec nevadi, ja taky ne. Ale muzem se prece naucit neco novyho.
Neocekavam, ze by to bylo vetsi prekvapeni nez kdyz jsem prvne videl prolog.

Delat to cely rucne by IMHO byla sebevrazda, nebo prinejmensim by se z toho
vytratila zabava. 

Ovsem ze zacatku musime zjistit limity RepRapu, takze jednoduche obvody
(oscilator, klopny obvod, hradlo, mozna i scitacku) rucne navrhovat asi
budeme.



From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr  2 10:24:39 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 2 Apr 2011 10:24:39 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <BANLkTikAj0StrvoxGL2i5rqGTAQs4Pzsbw@mail.gmail.com>
References: <4D951AAE.70407@ruza.eu>
	<BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
	<20110402001404.GA15617@localhost.dummy.net>
	<BANLkTikAj0StrvoxGL2i5rqGTAQs4Pzsbw@mail.gmail.com>
Message-ID: <20110402082439.GB577@localhost.dummy.net>


> pre inspiraciu ...
> neni to sice pneumaticke ... ale je to pekne
> http://www.youtube.com/watch?v=WcR7U2tuNoY

Jo, Theo je borec. A dokonce to JE PNEUMATICKE, nejen zasobnik energie v PET
lahvich (aby to mohlo utect pred prilivem, kdyz prestane foukat vitr) ale i
ridici system (binarni citac + nejaka logika ktera pozna jestli stoji ve
vode nebo na svahu). Jen je to cele diskretni (hadicky, pisty, ventily).

http://www.youtube.com/watch?v=vfltLQrXR3Q




From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr  2 10:48:54 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 2 Apr 2011 10:48:54 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <4D9675A3.8040801@gmail.com>
References: <BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
	<188a83db1a1512099c8ea2366e90e1d9.squirrel@mail.multiplace.sk>
	<20110402002002.GB15617@localhost.dummy.net>
	<4D9675A3.8040801@gmail.com>
Message-ID: <20110402084854.GC577@localhost.dummy.net>


> Jak tu vidim VHDL, mozem ponuknut jednu vec - vedel by som (najskor)
> zohnat licenciu na soft, ktory vie VHDL/Verilog-A/Verilog-AMS/MAST (plus
> CMX, co je custom jazyk, ktory je "kartezskym sucinom" featur tych
> zmienenych jazykov), simulaciu, vizualizaciu, editor toplogie (robil som v
> tej firme a este mi cosi dlzia).
> 
> Datasheet (trocha starsi):
> http://tekmarx.com/documents/lynguent_modlyng_datasheet_200806.pdf
> 
> Ak by o to mal niekto zaujem, napiste; akurat licencia je viazana na jeden
> komp.


Ahoj, nevim jestli to v tehle uvodni fazi vyuzijeme. Mozna pozdeji. Spis,
jestli mas zkusenosti s VHDL, tak by ses nam hodil jako odborny poradce,
protoze ja jsem s tim jeste nikdy nedelal.

Kazdopadne diky za nabidku (asi by bylo nakonec nejlepsi nainstalovat to na
nejaky pocitac v brmlabu, jestli to licence nezakazuje).


David



From vit.fargas at gmail.com  Sat Apr  2 11:41:23 2011
From: vit.fargas at gmail.com (=?UTF-8?B?VsOtdCBGYXJnYcWh?=)
Date: Sat, 2 Apr 2011 11:41:23 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <4D951AAE.70407@ruza.eu>
References: <4D951AAE.70407@ruza.eu>
Message-ID: <BANLkTinAsBY_PJsdHNo3vz8iQOXO-_0DgA@mail.gmail.com>

Super napad, rad sa pridam. Nie som si isty, do akej miery to bude
realizovatelne (napr. nejaky rozumny fyzikalny model na odhadnutie kolko
logickych prvkov to zvladne, ak to nefunguje preco to nefunguje, ak sa to
vytlaci a bude v tom blackboxe niekde chyba, najst/opravit ju bude celkom
vyzva...) - asi by bolo dobre sa v prvej fazi sustredit na otestovanie
fyzikalnych limitov takeho systemu...

Na vyske som inak robil vo VHDL, je to sice peknych par rokov dozadu, ale
nieco z toho si este pamatam - ak bude treba, mozem vytiahnut stare poznamky
a si to osviezit.

VeeTee

On Fri, Apr 1, 2011 at 02:22, Pavel Ruzicka <ruza at ruza.eu> wrote:

> http://rover.ms.mff.cuni.cz/pipermail/announce/2011-April/000032.html
>
> --
> e-mail:  ruza at ruza.eu
> www:   http://ruza.eu
>     http://brmlab.cz
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/e291d21f/attachment.html>

From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr  2 12:52:32 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 2 Apr 2011 12:52:32 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <BANLkTinAsBY_PJsdHNo3vz8iQOXO-_0DgA@mail.gmail.com>
References: <4D951AAE.70407@ruza.eu>
	<BANLkTinAsBY_PJsdHNo3vz8iQOXO-_0DgA@mail.gmail.com>
Message-ID: <20110402105232.GA3502@localhost.dummy.net>


> Super napad, rad sa pridam. Nie som si isty, do akej miery to bude
> realizovatelne (napr. nejaky rozumny fyzikalny model na odhadnutie kolko
> logickych prvkov to zvladne, ak to nefunguje preco to nefunguje, ak sa to
> vytlaci a bude v tom blackboxe niekde chyba, najst/opravit ju bude celkom
> vyzva...) - asi by bolo dobre sa v prvej fazi sustredit na otestovanie
> fyzikalnych limitov takeho systemu...

Presne tim chci zacit. Chci napsat simulator plynu. Abych se vyhnul
Navier-Stokesovym rovnicim tak to chci udelat jako tenkrat kdyz delali
connection-machine a simulovali plyn jako nekolik desitek tisic malych
pruznych micku ktere nechali spolu (a o steny) narazet. Sice to neni totez
jako vzduch, ale da se to pak udajne prepocitat podle podobnostnich
vztahu... Pro nase ucely by to mohlo stacit a meli bychom jednoduchy
fyzikalni simulator toho co se uvnitr deje.


> Na vyske som inak robil vo VHDL, je to sice peknych par rokov dozadu, ale
> nieco z toho si este pamatam - ak bude treba, mozem vytiahnut stare poznamky
> a si to osviezit.

Urcite se to bude hodit.




From blackhead at blackhead.cz  Sat Apr  2 13:08:18 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sat, 2 Apr 2011 13:08:18 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <20110402105232.GA3502@localhost.dummy.net>
Message-ID: <BNEBJCHIKOICJLAPBAPHCELKDLAA.blackhead@blackhead.cz>

Hele dneska uz neni april... Ale to co tu popisujes mi prijde jako spatnej
vtip... :-D
Ja vubec nemam zkusenosti s fyzikou v takovem meritku, abych objektivne
posoudil, co jsi napsal, ale z meho laickeho pohledu mi to prijde jako
ultimatni sci-fi.... ;-)

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
David Klusacek
Sent: Saturday, April 02, 2011 12:53 PM
To: brmlab at brmlab.cz
Subject: Re: [Brmlab] [Brmlab Announce] Navrh na novy projekt



> Super napad, rad sa pridam. Nie som si isty, do akej miery to bude
> realizovatelne (napr. nejaky rozumny fyzikalny model na odhadnutie kolko
> logickych prvkov to zvladne, ak to nefunguje preco to nefunguje, ak sa to
> vytlaci a bude v tom blackboxe niekde chyba, najst/opravit ju bude celkom
> vyzva...) - asi by bolo dobre sa v prvej fazi sustredit na otestovanie
> fyzikalnych limitov takeho systemu...

Presne tim chci zacit. Chci napsat simulator plynu. Abych se vyhnul
Navier-Stokesovym rovnicim tak to chci udelat jako tenkrat kdyz delali
connection-machine a simulovali plyn jako nekolik desitek tisic malych
pruznych micku ktere nechali spolu (a o steny) narazet. Sice to neni totez
jako vzduch, ale da se to pak udajne prepocitat podle podobnostnich
vztahu... Pro nase ucely by to mohlo stacit a meli bychom jednoduchy
fyzikalni simulator toho co se uvnitr deje.


> Na vyske som inak robil vo VHDL, je to sice peknych par rokov dozadu, ale
> nieco z toho si este pamatam - ak bude treba, mozem vytiahnut stare
poznamky
> a si to osviezit.

Urcite se to bude hodit.


_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From blackhead at blackhead.cz  Sat Apr  2 13:09:20 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sat, 2 Apr 2011 13:09:20 +0200
Subject: [Brmlab] VyBRM, aneb Brmlab na vylete?
In-Reply-To: <BNEBJCHIKOICJLAPBAPHMEJNDLAA.blackhead@blackhead.cz>
Message-ID: <BNEBJCHIKOICJLAPBAPHGELKDLAA.blackhead@blackhead.cz>

Ahoj

Jen pripominam, ze zitra rano v 9:45 je sraz pred Bubenskou.

Tesim se na Vas.
BH

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
George Blackhead
Sent: Sunday, March 20, 2011 1:25 PM
To: Brmlab: Hackerspace Prague (main discussion)
Subject: Re: [Brmlab] VyBRM, aneb Brmlab na vylete?


Tak uz je vicemene rozhodnuto. Pokud nebude zasadni problem s pocasim,
pujdeme 3. dubna.

Informace jsou na http://brmlab.cz/event/vybrm, je to pridane do kalendare.

Diky za zajem, tesim se na Vas v nedeli 3.4.!
BH

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
Ondrej Mikle
Sent: Friday, March 18, 2011 2:13 AM
To: Brmlab: Hackerspace Prague (main discussion)
Subject: Re: [Brmlab] VyBRM, aneb Brmlab na vylete?


Ja sa tiez pridam. Napisal som sa tam tiez (nejak som pred tym prehliadol
ten
doodle link)

OM

On 03/18/11 00:43, George Blackhead wrote:
> Tak zatim jen ctyri zajemci?
> Nikdo dalsi?
>
> Zatim vedou nedele 27.3. a 3.4., pokud nebude zadny dalsi zajemce, ktery
by
> to rozhodl, budousi damy muset hodit korunou... ;-)
>
> BH
>
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
Of
> George Blackhead
> Sent: Monday, March 14, 2011 11:19 AM
> To: Brmlab: Hackerspace Prague (main discussion)
> Subject: Re: [Brmlab] VyBRM, aneb Brmlab na vylete?
>
>
> Tak jo.
> Diky Ruzo.
>
> Takze prosim, zajem o VyBRM muzete projevit zde...
> http://www.doodle.com/gci8qdnihhhmcnyh
>
> Diky
> BH
>
>
>
>
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
Of
> Pavel Ruzicka
> Sent: Monday, March 14, 2011 9:27 AM
> To: Brmlab: Hackerspace Prague (main discussion)
> Subject: Re: [Brmlab] VyBRM, aneb Brmlab na vylete?
>
>
> fakt nechcete pouzit Doodle na dohodnuti terminu?
>
>
http://www.eduleadership.org/2011/02/02/stop-scheduling-via-email-try-doodle
> /
>
>> Hodia sa mi nedele 20.3. a 3.4.
>> Alexka
>>
>> 2011/3/13 George Blackhead <blackhead at blackhead.cz
>> <mailto:blackhead at blackhead.cz>>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From blackhead at blackhead.cz  Sat Apr  2 13:10:28 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sat, 2 Apr 2011 13:10:28 +0200
Subject: [Brmlab] Web problem
Message-ID: <BNEBJCHIKOICJLAPBAPHOELKDLAA.blackhead@blackhead.cz>

Uvodni stranka Brmlab.cz nejede.



From rainbof at gmail.com  Sat Apr  2 13:15:26 2011
From: rainbof at gmail.com (Ondrej Beranek)
Date: Sat, 2 Apr 2011 13:15:26 +0200
Subject: [Brmlab] Web problem
In-Reply-To: <BNEBJCHIKOICJLAPBAPHOELKDLAA.blackhead@blackhead.cz>
References: <BNEBJCHIKOICJLAPBAPHOELKDLAA.blackhead@blackhead.cz>
Message-ID: <BANLkTi=7JHd4Nd5oMXyH91inqDt7jDXrbQ@mail.gmail.com>

Asi hek?? :) klikni na odkaz na sta?en? ie
Dne 2.4.2011 13:11 "George Blackhead" <blackhead at blackhead.cz> napsal(a):
> Uvodni stranka Brmlab.cz nejede.
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/e289f945/attachment.html>

From sargonout at gmail.com  Sat Apr  2 13:17:19 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Sat, 2 Apr 2011 13:17:19 +0200
Subject: [Brmlab] Web problem
In-Reply-To: <BANLkTi=7JHd4Nd5oMXyH91inqDt7jDXrbQ@mail.gmail.com>
References: <BNEBJCHIKOICJLAPBAPHOELKDLAA.blackhead@blackhead.cz>
	<BANLkTi=7JHd4Nd5oMXyH91inqDt7jDXrbQ@mail.gmail.com>
Message-ID: <BANLkTi=zejPrpVp4KQ=hyxmWRBSfWCjVzA@mail.gmail.com>

ze nejaky unsuported browser ... ze mam pouzis IE6 :D
ale
http://brmlab.cz/start
funguje

2011/4/2 Ondrej Beranek <rainbof at gmail.com>

> Asi hek?? :) klikni na odkaz na sta?en? ie
> Dne 2.4.2011 13:11 "George Blackhead" <blackhead at blackhead.cz> napsal(a):
>
> > Uvodni stranka Brmlab.cz nejede.
> >
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/22289d29/attachment.html>

From blackhead at blackhead.cz  Sat Apr  2 13:20:24 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sat, 2 Apr 2011 13:20:24 +0200
Subject: [Brmlab] Web problem
In-Reply-To: <BANLkTi=zejPrpVp4KQ=hyxmWRBSfWCjVzA@mail.gmail.com>
Message-ID: <BNEBJCHIKOICJLAPBAPHIELLDLAA.blackhead@blackhead.cz>

Aha, takze aprilek, nachytal jsem se, ale dneska uz je druhyho....
  -----Original Message-----
  From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
Of Tomislav Arnaudov
  Sent: Saturday, April 02, 2011 1:17 PM
  To: Brmlab: Hackerspace Prague (main discussion)
  Subject: Re: [Brmlab] Web problem


  ze nejaky unsuported browser ... ze mam pouzis IE6 :D
  ale
  http://brmlab.cz/start
  funguje


  2011/4/2 Ondrej Beranek <rainbof at gmail.com>

    Asi hek?? :) klikni na odkaz na sta?en? ie

    Dne 2.4.2011 13:11 "George Blackhead" <blackhead at blackhead.cz>
napsal(a):

    > Uvodni stranka Brmlab.cz nejede.
    >
    > _______________________________________________
    > Brmlab mailing list
    > Brmlab at brmlab.cz
    > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab


    _______________________________________________
    Brmlab mailing list
    Brmlab at brmlab.cz
    http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/a0dda2b1/attachment.html>

From vit.fargas at gmail.com  Sat Apr  2 13:21:56 2011
From: vit.fargas at gmail.com (=?UTF-8?B?VsOtdCBGYXJnYcWh?=)
Date: Sat, 2 Apr 2011 13:21:56 +0200
Subject: [Brmlab] Web problem
In-Reply-To: <BANLkTi=7JHd4Nd5oMXyH91inqDt7jDXrbQ@mail.gmail.com>
References: <BNEBJCHIKOICJLAPBAPHOELKDLAA.blackhead@blackhead.cz>
	<BANLkTi=7JHd4Nd5oMXyH91inqDt7jDXrbQ@mail.gmail.com>
Message-ID: <BANLkTimLVL=u5yrxRoAVboFAn1X2XwkMJg@mail.gmail.com>

Len skoda ze to pod ie6 pise rovnaku hlasku, chcelo by to testnut browser a
redirect. :)

2011/4/2 Ondrej Beranek <rainbof at gmail.com>

> Asi hek?? :) klikni na odkaz na sta?en? ie
> Dne 2.4.2011 13:11 "George Blackhead" <blackhead at blackhead.cz> napsal(a):
>
> > Uvodni stranka Brmlab.cz nejede.
> >
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/cc8867ce/attachment.html>

From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr  2 13:45:22 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 2 Apr 2011 13:45:22 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <BNEBJCHIKOICJLAPBAPHCELKDLAA.blackhead@blackhead.cz>
References: <20110402105232.GA3502@localhost.dummy.net>
	<BNEBJCHIKOICJLAPBAPHCELKDLAA.blackhead@blackhead.cz>
Message-ID: <20110402114522.GA9842@localhost.dummy.net>



> Hele dneska uz neni april... Ale to co tu popisujes mi prijde jako spatnej
> vtip... :-D
> Ja vubec nemam zkusenosti s fyzikou v takovem meritku, abych objektivne
> posoudil, co jsi napsal, ale z meho laickeho pohledu mi to prijde jako
> ultimatni sci-fi.... ;-)

;-) Ja myslim, ze bych mel byt schopen to napsat. Je to porad klasicka fyzika
a uloha je to spis geometricka (pocitat kdy se protnou drahy castic, nebo
draha castice a stena). Takze neco jako takovej slozitejsi raytracer. A
raytracer jsem uz kdysi napsal a nebylo to nic v zasade tezkyho.

Jen to bude chit provozovat paralelne na mnoha pocitacich abychom se dozili
vysledku.

Rozhodne je to na naprogramovani jednodussi, nez se snazit resit
Navier-Stokese, na to uz bych si netroufl.




From vit.fargas at gmail.com  Sat Apr  2 13:32:50 2011
From: vit.fargas at gmail.com (=?UTF-8?B?VsOtdCBGYXJnYcWh?=)
Date: Sat, 2 Apr 2011 13:32:50 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <BNEBJCHIKOICJLAPBAPHCELKDLAA.blackhead@blackhead.cz>
References: <20110402105232.GA3502@localhost.dummy.net>
	<BNEBJCHIKOICJLAPBAPHCELKDLAA.blackhead@blackhead.cz>
Message-ID: <BANLkTi=nnnY=+5a+9MG_wcUVHbbEysD-gw@mail.gmail.com>

2011/4/2 George Blackhead <blackhead at blackhead.cz>

> Hele dneska uz neni april... Ale to co tu popisujes mi prijde jako spatnej
> vtip... :-D
>

Nechcem ti kazit iluzie ale april tu bude este 29 dni. :)

Nie som si inak celkom isty, ci bude pouzitelny model simulacie loptickami -
svojim sposobom je to zaujimavy napad, a podla mna stoji za to otestovat
hypotezu ci by sa to dalo tak simulovat (ak vyjdu nejake uplne nezmysly tak
asi nie), ale myslim ze popisat system nejakymi diferencialnymi rovnicami a
numericky ich pocitat by bolo lacnejsie...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/82a06a0e/attachment.html>

From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr  2 15:11:17 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 2 Apr 2011 15:11:17 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <BANLkTi=nnnY=+5a+9MG_wcUVHbbEysD-gw@mail.gmail.com>
References: <20110402105232.GA3502@localhost.dummy.net>
	<BNEBJCHIKOICJLAPBAPHCELKDLAA.blackhead@blackhead.cz>
	<BANLkTi=nnnY=+5a+9MG_wcUVHbbEysD-gw@mail.gmail.com>
Message-ID: <20110402131117.GA31314@localhost.dummy.net>



> Nie som si inak celkom isty, ci bude pouzitelny model simulacie loptickami -
> svojim sposobom je to zaujimavy napad, a podla mna stoji za to otestovat
> hypotezu ci by sa to dalo tak simulovat (ak vyjdu nejake uplne nezmysly tak

Neni to muj napad, dela se to tak uz leta:

http://longnow.org/essays/richard-feynman-and-connection-machine/

a dokonce jeste vic zjednodusene nez jsem psal:

"We have noticed in nature that the behavior of a fluid depends very little
on the nature of the individual particles in that fluid. For example, the
flow of sand is very similar to the flow of water or the flow of a pile of
ball bearings. We have therefore taken advantage of this fact to invent a
type of imaginary particle that is especially simple for us to simulate.
This particle is a perfect ball bearing that can move at a single speed in
one of six directions. The flow of these particles on a large enough scale
is very similar to the flow of natural fluids."


> asi nie), ale myslim ze popisat system nejakymi diferencialnymi rovnicami a
> numericky ich pocitat by bolo lacnejsie...

Ty nejake rovnice se jmenuji Navier-Stokesovy, jednou jsem se na ne snazil
napsat resic, ale pak jsem to vzdal. To je vazne nasobne tezsi nez nechat
odrazet micky.




From suchan.tomas at gmail.com  Sat Apr  2 18:55:30 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Sat, 2 Apr 2011 18:55:30 +0200
Subject: [Brmlab] Web problem
In-Reply-To: <BANLkTimLVL=u5yrxRoAVboFAn1X2XwkMJg@mail.gmail.com>
References: <BNEBJCHIKOICJLAPBAPHOELKDLAA.blackhead@blackhead.cz>
	<BANLkTi=7JHd4Nd5oMXyH91inqDt7jDXrbQ@mail.gmail.com>
	<BANLkTimLVL=u5yrxRoAVboFAn1X2XwkMJg@mail.gmail.com>
Message-ID: <AANLkTi=j8bTe_2txYa_F_10h0z=FBWOLRxVbE2iUQEgy@mail.gmail.com>

Tak jsem si pod ubuntu nainstaloval IE6 a zapnul javu. Nejde to stejne. Asi
napisu na support at brmlab.microsoft.com
Dne 2.4.2011 13:23 "V?t Farga?" <vit.fargas at gmail.com> napsal(a):
> Len skoda ze to pod ie6 pise rovnaku hlasku, chcelo by to testnut browser
a
> redirect. :)
>
> 2011/4/2 Ondrej Beranek <rainbof at gmail.com>
>
>> Asi hek?? :) klikni na odkaz na sta?en? ie
>> Dne 2.4.2011 13:11 "George Blackhead" <blackhead at blackhead.cz> napsal(a):
>>
>> > Uvodni stranka Brmlab.cz nejede.
>> >
>> > _______________________________________________
>> > Brmlab mailing list
>> > Brmlab at brmlab.cz
>> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/436ee74c/attachment.html>

From blackhead at blackhead.cz  Sat Apr  2 21:33:01 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sat, 2 Apr 2011 21:33:01 +0200
Subject: [Brmlab] Web problem
In-Reply-To: <BANLkTimLVL=u5yrxRoAVboFAn1X2XwkMJg@mail.gmail.com>
Message-ID: <BNEBJCHIKOICJLAPBAPHOELMDLAA.blackhead@blackhead.cz>

Ja jsem se nachytal prave proto, ze to pise pod ie6.
  -----Original Message-----
  From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of V?t Farga?
  Sent: Saturday, April 02, 2011 1:22 PM
  To: Brmlab: Hackerspace Prague (main discussion)
  Subject: Re: [Brmlab] Web problem


  Len skoda ze to pod ie6 pise rovnaku hlasku, chcelo by to testnut browser a redirect. :)


  2011/4/2 Ondrej Beranek <rainbof at gmail.com>

    Asi hek?? :) klikni na odkaz na sta?en? ie

    Dne 2.4.2011 13:11 "George Blackhead" <blackhead at blackhead.cz> napsal(a):

    > Uvodni stranka Brmlab.cz nejede.
    > 
    > _______________________________________________
    > Brmlab mailing list
    > Brmlab at brmlab.cz
    > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab


    _______________________________________________
    Brmlab mailing list
    Brmlab at brmlab.cz
    http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110402/e2a604e3/attachment.html>

From pasky at ucw.cz  Sun Apr  3 11:12:41 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Sun, 3 Apr 2011 11:12:41 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <20110402084854.GC577@localhost.dummy.net>
References: <BNEBJCHIKOICJLAPBAPHKELHDLAA.blackhead@blackhead.cz>
	<188a83db1a1512099c8ea2366e90e1d9.squirrel@mail.multiplace.sk>
	<20110402002002.GB15617@localhost.dummy.net>
	<4D9675A3.8040801@gmail.com>
	<20110402084854.GC577@localhost.dummy.net>
Message-ID: <20110403091241.GV3258@machine.or.cz>

On Sat, Apr 02, 2011 at 10:48:54AM +0200, David Klusacek wrote:
> Kazdopadne diky za nabidku (asi by bylo nakonec nejlepsi nainstalovat to na
> nejaky pocitac v brmlabu, jestli to licence nezakazuje).

(Tohle uz je trochu offtopic, ale nejlepsi strategie na instalovani
takovychhle zlych veci mi prijde instalovat to do virtualniho stroje
(kdyz to licence nezakazuje, coz asi nebyva obvykle), ktery si pak
pustis, kde a kdy potrebujes. Pocitac odejde a jsme v haji, resp. bude
muset nabehnout nekdo s Idou. ;-)

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From pasky at ucw.cz  Sun Apr  3 11:17:19 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Sun, 3 Apr 2011 11:17:19 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <20110402114522.GA9842@localhost.dummy.net>
References: <20110402105232.GA3502@localhost.dummy.net>
	<BNEBJCHIKOICJLAPBAPHCELKDLAA.blackhead@blackhead.cz>
	<20110402114522.GA9842@localhost.dummy.net>
Message-ID: <20110403091719.GW3258@machine.or.cz>

On Sat, Apr 02, 2011 at 01:45:22PM +0200, David Klusacek wrote:
> Jen to bude chit provozovat paralelne na mnoha pocitacich abychom se dozili
> vysledku.

Jestli bude videt kod, myslim, ze sehnat pomerne slusny paralelni vykon
pujde v brmlabu zaridit z vice zdroju. ;-)

Fandim Vam!

				Petr "Pasky" Baudis


From vbar at comp.cz  Sun Apr  3 17:19:22 2011
From: vbar at comp.cz (Vaclav Barta)
Date: Sun, 03 Apr 2011 17:19:22 +0200
Subject: [Brmlab] US trafo
Message-ID: <4D988FFA.4060904@comp.cz>

Hi,

prekazi mi v docasnem byte po byvalem spolupracovnikovi transformator 
evropskeho proudu pro americke spotrebice (puvodne na pocitac, ale pry 
ma solidni vykon a utahne ledacos). Osobne pro nej nemam pouziti, ale 
pripada mi skoda nechat ho tu lezet ladem, a domaci by patrne nijak 
nepotesilo kdyby ho musela recyklovat, takze jsem se chtel zeptat, 
naslo-li by se pro nej pouziti v Brmlabu? Postovne do Prahy uhradim.

	Bye
		Vasek


From pasky at ucw.cz  Sun Apr  3 21:40:41 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Sun, 3 Apr 2011 21:40:41 +0200
Subject: [Brmlab] VyBRM, aneb Brmlab na vylete?
In-Reply-To: <BNEBJCHIKOICJLAPBAPHGELKDLAA.blackhead@blackhead.cz>
References: <BNEBJCHIKOICJLAPBAPHMEJNDLAA.blackhead@blackhead.cz>
	<BNEBJCHIKOICJLAPBAPHGELKDLAA.blackhead@blackhead.cz>
Message-ID: <20110403194041.GX3258@machine.or.cz>

  Ahoj!

On Sat, Apr 02, 2011 at 01:09:20PM +0200, George Blackhead wrote:
> Jen pripominam, ze zitra rano v 9:45 je sraz pred Bubenskou.

  Tak jake to bylo? :-)

				Petr "Pasky" Baudis


From klusacek at atrey.karlin.mff.cuni.cz  Sun Apr  3 22:36:55 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sun, 3 Apr 2011 22:36:55 +0200
Subject: [Brmlab] [Brmlab Announce] Navrh na novy projekt
In-Reply-To: <20110403091719.GW3258@machine.or.cz>
References: <20110402105232.GA3502@localhost.dummy.net>
	<BNEBJCHIKOICJLAPBAPHCELKDLAA.blackhead@blackhead.cz>
	<20110402114522.GA9842@localhost.dummy.net>
	<20110403091719.GW3258@machine.or.cz>
Message-ID: <20110403203655.GA5260@localhost.dummy.net>


> > Jen to bude chit provozovat paralelne na mnoha pocitacich abychom se dozili
> > vysledku.
> 
> Jestli bude videt kod, myslim, ze sehnat pomerne slusny paralelni vykon
> pujde v brmlabu zaridit z vice zdroju. ;-)

Jo, budu to psat v Ccku. Ale nevim jestli dostatecne dobre aby to pak slo
rovnou spustit na GPU ;)




From blackhead at blackhead.cz  Sun Apr  3 23:34:41 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sun, 3 Apr 2011 23:34:41 +0200
Subject: [Brmlab] VyBRM, aneb Brmlab na vylete?
In-Reply-To: <20110403194041.GX3258@machine.or.cz>
Message-ID: <BNEBJCHIKOICJLAPBAPHKELODLAA.blackhead@blackhead.cz>

Za sebe mohu rict, ze jsem spokojen. Polovina lidi dosla az na Ladvi.

Podrobna trasa k nahlednuti zde:

http://mapy.cz/#mm=FP at dm=133111424+135992128+112+1728-2112+0-2752-768-784+35
2+336+4864-2768+512-96+848-272+2048-432+2576-2768+6752-48+720+400+432-592+48
0-2912+96-4384+2512-944+224-1072-176-1056+288-976+688-1152+368-2576+256-5472
+1056-4960-2128-2112-688-1936-320-7312+1536-1600+7824+640+560+1824+912+6320+
1936+112+912-1856+6304+112+336-224+1920-2592+208-576+480+368+3536+32+3040-32
+6368+0+1952+96+3376+416+672+0+2352+240+288-96+592-32+1008+336+912+944+608+1
232+256+512+32+512+224+1360+672+1376+560+880+16+816+720+608+304+208+432+80+3
52+288+208+368+704+336+560+1056+912+2080-32+544+192+944+80+624+496+816+528+1
264+1696+656+240+944+1408+400+688+192+848-176+768-1696+3744-496+560-320+112-
640-544-1344-1120-1072-528-944-624-480-448-928+144-400+192-816-32-576-256-54
4-176-240+176+48+544+496+416+768+576-144+192-704-352-544-320-400-528-992-150
4+48-1296-992-432-368-656+240-752-592-320-896-112-1136-192+2096+240+544+320-
96+912+0+528+1360+576-240+2688+2448+2992+0+1408+0+1264+160+752-3472+48-608-1
92-2512+48-3104-1600-464-1056-352-1616-160-512-752-128-784-224-1184-464-2416
-80-864+192-832+432-496+512+0+768+544+576+3312+160+3328+1408+592+928+208+944
+1216+368+512+192+208+1808-2160+368-1248+320-880-224-464+864-768-48-304+256-
432+432-880+80-672+256-400-272-880-32-8784+832-928+304-816+208-1040+560-1008
+3136-1248+112-1328+1696-80+1456-224+720-448+928-320+688-96+416-720+992-336+
96-2688-272-336+992+3024+656+304+544+1120-128+1536-16+1584-416+448-336+640+6
4+656+640+480+848-64+592+352+224+208+976+336+1168+32+1072+336+416-352-128-33
6+64+144+1056+352+32+544+528+384+640+2704+128-32+416+208+400+224+304+224+352
+224+1888+384+80+3232-144+400+4544+1344-144+672-176+1600-16+944+112+864-48+3
04+336+336+2304+928+784+0+3168-496+1568-1040-64-1328+368-624+160-1456-48-416
+384+528+6256+384+192+240+576-48+1296+928+64+64+1296+2208+128+480+192+272-48
-16-416+400-32+64-1296+0-880+128-560+608-864+7824-1168+9216-13184+352-304+40
0-32+240+144+10144+6944+864+304+1808-64+64-4480+784-48-96-5600+240-544-144-1
232+64-432-272-96+576-2880+320-1232+416-1168+352-656+2704+1344+640-128+448-1
60+704-1712+1424-3280+432-704+864-400+656-416+1616+512+1888+608+3008+752+248
0+592+1120+16+3232+1104+2448+816+3744+832+4256+960+1984+1088+1392+1008+1232+
1408+1024+1616+1104+928+1936+720+656-1568+2016-320+1024+48+3424+1088+1360+30
4+272+384+1024+128+160+288+912-16-64+1616-64+880+2800+528+1600+1152+1776+816
+928+128+2480+1776+2000+1296+1072+688+1856+544+512-1120+848-1216+896-784+160
0-256+2192-112+928+512+864+480+1664+896+768+720+1648+144+2096+1408+1616+256+
1296+896+1392+3312+5008+1376+3168+2288+1488+1216+1392+672+2032+1440+384+528+
704+352+864+1600+560+608+1616+1840+2816+1264+1536+432-672-352-320-496+336-10
88+192-688+2112-2720-288-272-1264-2000-768-1552-960-1952-48-752+480-1280+560
-1008-2288-2272+2320-2128+3088-2704-528-1856-208-1280+144-576+0-1056-368-528
+144-816+640-96+416-512+5024-13216+112-352-7856-3840-7376-3360-1440-592-4144
-1248-2192-480-784-64 at x=133195264 at y=136096976 at z=16

:-)

Mapy.cz nam to zmerili na 18.8km!

Bylo moc hezky. A jako takovy mini-report mohu uvest, ze: V Holesovicich na
jedne krizovatce prselo, Slechtovka jeste nespadla, dira do Blanky ve
Stromovce uz zarostla, Trojska lavka se pekne houpala, vresoviste jeste
neuplne nevymrelo, horni cast botanicky uz neni volne pristupna, lama na nas
neplivla, v pavilonu 25 nikdo z nas nezustal a srkvny na Slunci byly videt
dobre.

Dekuji vsem zucastnenym!
BH


-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
Petr Baudis
Sent: Sunday, April 03, 2011 9:41 PM
To: Brmlab: Hackerspace Prague (main discussion)
Subject: Re: [Brmlab] VyBRM, aneb Brmlab na vylete?


  Ahoj!

On Sat, Apr 02, 2011 at 01:09:20PM +0200, George Blackhead wrote:
> Jen pripominam, ze zitra rano v 9:45 je sraz pred Bubenskou.

  Tak jake to bylo? :-)

				Petr "Pasky" Baudis
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From stevko at mail.ru  Mon Apr  4 22:31:15 2011
From: stevko at mail.ru (Stevko)
Date: Mon, 4 Apr 2011 22:31:15 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
Message-ID: <20110404223115.03fca863@alf>

Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi mohli
po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o bud? hra? na gitare
v ?kolskej triede. M?j nahr?vac? pr?stroj s?ce nahr?va, ale je vhodn?
na predn??ky, nie na hudbu (zatia? ka?d? hudba bola na?ho moc hlasn?).

Stevko
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110404/f1580423/attachment.pgp>

From suchan.tomas at gmail.com  Mon Apr  4 22:34:20 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Mon, 4 Apr 2011 22:34:20 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <20110404223115.03fca863@alf>
References: <20110404223115.03fca863@alf>
Message-ID: <BANLkTi=G7yzBb66dUzjmtAFhtMZSFa5qjQ@mail.gmail.com>

Mohu ti pujcit minidisc s mikrofonem, popripade kvalitni externi zvukovku s
mikrofonem....
Dne 4.4.2011 22:32 "Stevko" <stevko at mail.ru> napsal(a):
> Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi mohli
> po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o bud? hra? na gitare
> v ?kolskej triede. M?j nahr?vac? pr?stroj s?ce nahr?va, ale je vhodn?
> na predn??ky, nie na hudbu (zatia? ka?d? hudba bola na?ho moc hlasn?).
>
> Stevko
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110404/aaa1a7fa/attachment.html>

From stevko at mail.ru  Mon Apr  4 22:52:40 2011
From: stevko at mail.ru (Stevko)
Date: Mon, 4 Apr 2011 22:52:40 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <BANLkTi=G7yzBb66dUzjmtAFhtMZSFa5qjQ@mail.gmail.com>
References: <20110404223115.03fca863@alf>
	<BANLkTi=G7yzBb66dUzjmtAFhtMZSFa5qjQ@mail.gmail.com>
Message-ID: <20110404225240.50aff811@alf>

Zvukovku nie, to by som nemal kam pripoji?. Ale minidisk by nemusel by?
zl?. Vie? to potom z minidisku dosta? do po??ta?a? Zvl?dne to aj
hlu?nej?ie zvuky nahra?? Ako dlho to vie nahr?va? (?i u? ko?ko sa tam
toho vlezie, alebo ako dlho vydr?ia baterky)?
Stevko

D?a Mon, 4 Apr 2011 22:34:20 +0200
Tomas Suchan <suchan.tomas at gmail.com> nap?sal:

> Mohu ti pujcit minidisc s mikrofonem, popripade kvalitni externi
> zvukovku s mikrofonem....
> Dne 4.4.2011 22:32 "Stevko" <stevko at mail.ru> napsal(a):
> > Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi mohli
> > po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o bud? hra? na
> > gitare v ?kolskej triede. M?j nahr?vac? pr?stroj s?ce nahr?va, ale
> > je vhodn? na predn??ky, nie na hudbu (zatia? ka?d? hudba bola na?ho
> > moc hlasn?).
> >
> > Stevko

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110404/9781fe12/attachment.pgp>

From suchan.tomas at gmail.com  Mon Apr  4 23:08:15 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Mon, 4 Apr 2011 23:08:15 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <20110404225240.50aff811@alf>
References: <20110404223115.03fca863@alf>
	<BANLkTi=G7yzBb66dUzjmtAFhtMZSFa5qjQ@mail.gmail.com>
	<20110404225240.50aff811@alf>
Message-ID: <BANLkTi=Byg+c8UbLHWfGKHMO68z9uaM2-A@mail.gmail.com>

Ten MD je na 220 a medii mam hromadu. Vysledek stahnu toslinkem....
Hlasitejsi zvuky nejsou problem....
Dne 4.4.2011 22:53 "Stevko" <stevko at mail.ru> napsal(a):
> Zvukovku nie, to by som nemal kam pripoji?. Ale minidisk by nemusel by?
> zl?. Vie? to potom z minidisku dosta? do po??ta?a? Zvl?dne to aj
> hlu?nej?ie zvuky nahra?? Ako dlho to vie nahr?va? (?i u? ko?ko sa tam
> toho vlezie, alebo ako dlho vydr?ia baterky)?
> Stevko
>
> D?a Mon, 4 Apr 2011 22:34:20 +0200
> Tomas Suchan <suchan.tomas at gmail.com> nap?sal:
>
>> Mohu ti pujcit minidisc s mikrofonem, popripade kvalitni externi
>> zvukovku s mikrofonem....
>> Dne 4.4.2011 22:32 "Stevko" <stevko at mail.ru> napsal(a):
>> > Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi mohli
>> > po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o bud? hra? na
>> > gitare v ?kolskej triede. M?j nahr?vac? pr?stroj s?ce nahr?va, ale
>> > je vhodn? na predn??ky, nie na hudbu (zatia? ka?d? hudba bola na?ho
>> > moc hlasn?).
>> >
>> > Stevko
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110404/2bf4ac71/attachment.html>

From suchan.tomas at gmail.com  Mon Apr  4 23:09:43 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Mon, 4 Apr 2011 23:09:43 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <BANLkTi=Byg+c8UbLHWfGKHMO68z9uaM2-A@mail.gmail.com>
References: <20110404223115.03fca863@alf>
	<BANLkTi=G7yzBb66dUzjmtAFhtMZSFa5qjQ@mail.gmail.com>
	<20110404225240.50aff811@alf>
	<BANLkTi=Byg+c8UbLHWfGKHMO68z9uaM2-A@mail.gmail.com>
Message-ID: <BANLkTikjAhATVaEY2vLxAE+Thp-GFrwYnQ@mail.gmail.com>

Popripade se muzes zeptat Ruzi, jestli by ti T.A.L nepujcilo nahravadlo. To
by bylo pro tebe totalne idealni.
Dne 4.4.2011 23:08 "Tomas Suchan" <suchan.tomas at gmail.com> napsal(a):
> Ten MD je na 220 a medii mam hromadu. Vysledek stahnu toslinkem....
> Hlasitejsi zvuky nejsou problem....
> Dne 4.4.2011 22:53 "Stevko" <stevko at mail.ru> napsal(a):
>> Zvukovku nie, to by som nemal kam pripoji?. Ale minidisk by nemusel by?
>> zl?. Vie? to potom z minidisku dosta? do po??ta?a? Zvl?dne to aj
>> hlu?nej?ie zvuky nahra?? Ako dlho to vie nahr?va? (?i u? ko?ko sa tam
>> toho vlezie, alebo ako dlho vydr?ia baterky)?
>> Stevko
>>
>> D?a Mon, 4 Apr 2011 22:34:20 +0200
>> Tomas Suchan <suchan.tomas at gmail.com> nap?sal:
>>
>>> Mohu ti pujcit minidisc s mikrofonem, popripade kvalitni externi
>>> zvukovku s mikrofonem....
>>> Dne 4.4.2011 22:32 "Stevko" <stevko at mail.ru> napsal(a):
>>> > Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi mohli
>>> > po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o bud? hra? na
>>> > gitare v ?kolskej triede. M?j nahr?vac? pr?stroj s?ce nahr?va, ale
>>> > je vhodn? na predn??ky, nie na hudbu (zatia? ka?d? hudba bola na?ho
>>> > moc hlasn?).
>>> >
>>> > Stevko
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110404/c375797b/attachment.html>

From blackhead at blackhead.cz  Mon Apr  4 23:26:46 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Mon, 4 Apr 2011 23:26:46 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <BANLkTikjAhATVaEY2vLxAE+Thp-GFrwYnQ@mail.gmail.com>
Message-ID: <BNEBJCHIKOICJLAPBAPHEEMEDLAA.blackhead@blackhead.cz>

Tome, ma to nahravadlo mikrofon? (fakt nevim)

Jinak, mam pocit ze Stevko chtel neco prenosneho, ne stolni masinu...
Jinak ja muzu pujcit kapesni minidisc recorder. Ale nemam zkusenosti s
nahravanim na nej, nevim jak dlouho vydrzi baterky atd... Stahnout to do
kompu neni problem. Na disk se ve vysoke kvalite vejde 74-80 minut... Par
disku pujcim take...

Ale zarizeni vyssi tridy s externim profi mikrofonem by ti jiste udelalo
lepsi sluzbu... Ze, Tome?

BH
  -----Original Message-----
  From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
Of Tomas Suchan
  Sent: Monday, April 04, 2011 11:10 PM
  To: Brmlab: Hackerspace Prague (main discussion)
  Subject: Re: [Brmlab] Po?i?a? nahr?vacie zariadenie


  Popripade se muzes zeptat Ruzi, jestli by ti T.A.L nepujcilo nahravadlo.
To by bylo pro tebe totalne idealni.

  Dne 4.4.2011 23:08 "Tomas Suchan" <suchan.tomas at gmail.com> napsal(a):
  > Ten MD je na 220 a medii mam hromadu. Vysledek stahnu toslinkem....
  > Hlasitejsi zvuky nejsou problem....
  > Dne 4.4.2011 22:53 "Stevko" <stevko at mail.ru> napsal(a):
  >> Zvukovku nie, to by som nemal kam pripoji?. Ale minidisk by nemusel by?
  >> zl?. Vie? to potom z minidisku dosta? do po??ta?a? Zvl?dne to aj
  >> hlu?nej?ie zvuky nahra?? Ako dlho to vie nahr?va? (?i u? ko?ko sa tam
  >> toho vlezie, alebo ako dlho vydr?ia baterky)?
  >> Stevko
  >>
  >> D?a Mon, 4 Apr 2011 22:34:20 +0200
  >> Tomas Suchan <suchan.tomas at gmail.com> nap?sal:
  >>
  >>> Mohu ti pujcit minidisc s mikrofonem, popripade kvalitni externi
  >>> zvukovku s mikrofonem....
  >>> Dne 4.4.2011 22:32 "Stevko" <stevko at mail.ru> napsal(a):
  >>> > Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi mohli
  >>> > po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o bud? hra? na
  >>> > gitare v ?kolskej triede. M?j nahr?vac? pr?stroj s?ce nahr?va, ale
  >>> > je vhodn? na predn??ky, nie na hudbu (zatia? ka?d? hudba bola na?ho
  >>> > moc hlasn?).
  >>> >
  >>> > Stevko
  >>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110404/620ad950/attachment.html>

From suchan.tomas at gmail.com  Mon Apr  4 23:55:27 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Mon, 4 Apr 2011 23:55:27 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <BNEBJCHIKOICJLAPBAPHEEMEDLAA.blackhead@blackhead.cz>
References: <BANLkTikjAhATVaEY2vLxAE+Thp-GFrwYnQ@mail.gmail.com>
	<BNEBJCHIKOICJLAPBAPHEEMEDLAA.blackhead@blackhead.cz>
Message-ID: <BANLkTi=duxoPbf482Nh7t3jwym3ykv3KDA@mail.gmail.com>

Stolni MD nebo kapesni, rozdil je pouze v prevodnikach a pouzitem kodeku.
Pokud to jsou  obe masiny SONY tak by to melo byt az na par malickosti temer
shodne. Samozrejme mas pravdu Blacku v to kvalitni mikrofon je zaklad.
Trebas sum jde postprocesingem odstranit ale chybejici vejsky z duvodu
nekvalitniho mokrofonu uz jen tak nenazenes.....
Dne 4.4.2011 23:27 "George Blackhead" <blackhead at blackhead.cz> napsal(a):
> Tome, ma to nahravadlo mikrofon? (fakt nevim)
>
> Jinak, mam pocit ze Stevko chtel neco prenosneho, ne stolni masinu...
> Jinak ja muzu pujcit kapesni minidisc recorder. Ale nemam zkusenosti s
> nahravanim na nej, nevim jak dlouho vydrzi baterky atd... Stahnout to do
> kompu neni problem. Na disk se ve vysoke kvalite vejde 74-80 minut... Par
> disku pujcim take...
>
> Ale zarizeni vyssi tridy s externim profi mikrofonem by ti jiste udelalo
> lepsi sluzbu... Ze, Tome?
>
> BH
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
> Of Tomas Suchan
> Sent: Monday, April 04, 2011 11:10 PM
> To: Brmlab: Hackerspace Prague (main discussion)
> Subject: Re: [Brmlab] Po?i?a? nahr?vacie zariadenie
>
>
> Popripade se muzes zeptat Ruzi, jestli by ti T.A.L nepujcilo nahravadlo.
> To by bylo pro tebe totalne idealni.
>
> Dne 4.4.2011 23:08 "Tomas Suchan" <suchan.tomas at gmail.com> napsal(a):
> > Ten MD je na 220 a medii mam hromadu. Vysledek stahnu toslinkem....
> > Hlasitejsi zvuky nejsou problem....
> > Dne 4.4.2011 22:53 "Stevko" <stevko at mail.ru> napsal(a):
> >> Zvukovku nie, to by som nemal kam pripoji?. Ale minidisk by nemusel by?
> >> zl?. Vie? to potom z minidisku dosta? do po??ta?a? Zvl?dne to aj
> >> hlu?nej?ie zvuky nahra?? Ako dlho to vie nahr?va? (?i u? ko?ko sa tam
> >> toho vlezie, alebo ako dlho vydr?ia baterky)?
> >> Stevko
> >>
> >> D?a Mon, 4 Apr 2011 22:34:20 +0200
> >> Tomas Suchan <suchan.tomas at gmail.com> nap?sal:
> >>
> >>> Mohu ti pujcit minidisc s mikrofonem, popripade kvalitni externi
> >>> zvukovku s mikrofonem....
> >>> Dne 4.4.2011 22:32 "Stevko" <stevko at mail.ru> napsal(a):
> >>> > Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi mohli
> >>> > po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o bud? hra? na
> >>> > gitare v ?kolskej triede. M?j nahr?vac? pr?stroj s?ce nahr?va, ale
> >>> > je vhodn? na predn??ky, nie na hudbu (zatia? ka?d? hudba bola na?ho
> >>> > moc hlasn?).
> >>> >
> >>> > Stevko
> >>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110404/be5335a2/attachment.html>

From suchan.tomas at gmail.com  Mon Apr  4 23:56:39 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Mon, 4 Apr 2011 23:56:39 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <BNEBJCHIKOICJLAPBAPHEEMEDLAA.blackhead@blackhead.cz>
References: <BANLkTikjAhATVaEY2vLxAE+Thp-GFrwYnQ@mail.gmail.com>
	<BNEBJCHIKOICJLAPBAPHEEMEDLAA.blackhead@blackhead.cz>
Message-ID: <BANLkTi=rTho8VnJa24APvimeLHZzLB459Q@mail.gmail.com>

PS: to kapelni nahravadlo ma dost kvalitni integrovane mikrofony....
Dne 4.4.2011 23:27 "George Blackhead" <blackhead at blackhead.cz> napsal(a):
> Tome, ma to nahravadlo mikrofon? (fakt nevim)
>
> Jinak, mam pocit ze Stevko chtel neco prenosneho, ne stolni masinu...
> Jinak ja muzu pujcit kapesni minidisc recorder. Ale nemam zkusenosti s
> nahravanim na nej, nevim jak dlouho vydrzi baterky atd... Stahnout to do
> kompu neni problem. Na disk se ve vysoke kvalite vejde 74-80 minut... Par
> disku pujcim take...
>
> Ale zarizeni vyssi tridy s externim profi mikrofonem by ti jiste udelalo
> lepsi sluzbu... Ze, Tome?
>
> BH
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
> Of Tomas Suchan
> Sent: Monday, April 04, 2011 11:10 PM
> To: Brmlab: Hackerspace Prague (main discussion)
> Subject: Re: [Brmlab] Po?i?a? nahr?vacie zariadenie
>
>
> Popripade se muzes zeptat Ruzi, jestli by ti T.A.L nepujcilo nahravadlo.
> To by bylo pro tebe totalne idealni.
>
> Dne 4.4.2011 23:08 "Tomas Suchan" <suchan.tomas at gmail.com> napsal(a):
> > Ten MD je na 220 a medii mam hromadu. Vysledek stahnu toslinkem....
> > Hlasitejsi zvuky nejsou problem....
> > Dne 4.4.2011 22:53 "Stevko" <stevko at mail.ru> napsal(a):
> >> Zvukovku nie, to by som nemal kam pripoji?. Ale minidisk by nemusel by?
> >> zl?. Vie? to potom z minidisku dosta? do po??ta?a? Zvl?dne to aj
> >> hlu?nej?ie zvuky nahra?? Ako dlho to vie nahr?va? (?i u? ko?ko sa tam
> >> toho vlezie, alebo ako dlho vydr?ia baterky)?
> >> Stevko
> >>
> >> D?a Mon, 4 Apr 2011 22:34:20 +0200
> >> Tomas Suchan <suchan.tomas at gmail.com> nap?sal:
> >>
> >>> Mohu ti pujcit minidisc s mikrofonem, popripade kvalitni externi
> >>> zvukovku s mikrofonem....
> >>> Dne 4.4.2011 22:32 "Stevko" <stevko at mail.ru> napsal(a):
> >>> > Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi mohli
> >>> > po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o bud? hra? na
> >>> > gitare v ?kolskej triede. M?j nahr?vac? pr?stroj s?ce nahr?va, ale
> >>> > je vhodn? na predn??ky, nie na hudbu (zatia? ka?d? hudba bola na?ho
> >>> > moc hlasn?).
> >>> >
> >>> > Stevko
> >>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110404/714d289c/attachment.html>

From ruza at ruza.eu  Tue Apr  5 00:04:37 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Tue, 05 Apr 2011 00:04:37 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <BANLkTikjAhATVaEY2vLxAE+Thp-GFrwYnQ@mail.gmail.com>
References: <20110404223115.03fca863@alf>	<BANLkTi=G7yzBb66dUzjmtAFhtMZSFa5qjQ@mail.gmail.com>	<20110404225240.50aff811@alf>	<BANLkTi=Byg+c8UbLHWfGKHMO68z9uaM2-A@mail.gmail.com>
	<BANLkTikjAhATVaEY2vLxAE+Thp-GFrwYnQ@mail.gmail.com>
Message-ID: <4D9A4075.9060609@ruza.eu>

On 04/04/2011 11:09 PM, Tomas Suchan wrote:
> Popripade se muzes zeptat Ruzi, jestli by ti T.A.L nepujcilo nahravadlo.
> To by bylo pro tebe totalne idealni.

Tome, ja s tim nemam dusevni problem, ale na pujceni se zeptej primo
Romana, ktery jim vladne.

-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz


From stevko at mail.ru  Tue Apr  5 00:07:59 2011
From: stevko at mail.ru (Stevko)
Date: Tue, 5 Apr 2011 00:07:59 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <BNEBJCHIKOICJLAPBAPHEEMEDLAA.blackhead@blackhead.cz>
References: <BANLkTikjAhATVaEY2vLxAE+Thp-GFrwYnQ@mail.gmail.com>
	<BNEBJCHIKOICJLAPBAPHEEMEDLAA.blackhead@blackhead.cz>
Message-ID: <20110405000759.39474f36@alf>

Ja som mal na mysli nie?o tak? (a podobn?):
https://secure.wikimedia.org/wikipedia/en/wiki/Zoom_H4_Handy_Recorder

Rad?ej prenosn? ako stoln? ma?ina. Je to akcia (v Hradci
Kr?lov?, tak?e zariadenie budem ?aha? sebou), kde je okrem in?ho aj
koncert (?lovek v triede s gitarou na stoli?ke pred ?al??mi cca
tridsiatimi ?u?mi, v?etko bez techniky). Od pr?slu?n?ho koncertuj?ceho
m?m povolenie nahra? si ho, ale nem?m vhodn? zariadenie (uk??ka, ako
nahr?va moje zariadenie: http://disk.jabbim.cz/stevko at jabber.cz/ble.mp3
- osoby s citliv?mi u?ami nech nepo??vaj?).

Stevko

D?a Mon, 4 Apr 2011 23:26:46 +0200 "George Blackhead"
<blackhead at blackhead.cz> nap?sal:

> Tome, ma to nahravadlo mikrofon? (fakt nevim)
> 
> Jinak, mam pocit ze Stevko chtel neco prenosneho, ne stolni masinu...
> Jinak ja muzu pujcit kapesni minidisc recorder. Ale nemam zkusenosti s
> nahravanim na nej, nevim jak dlouho vydrzi baterky atd... Stahnout to
> do kompu neni problem. Na disk se ve vysoke kvalite vejde 74-80
> minut... Par disku pujcim take...
> 
> Ale zarizeni vyssi tridy s externim profi mikrofonem by ti jiste
> udelalo lepsi sluzbu... Ze, Tome?
> 
> BH
>   -----Original Message-----
>   From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On
> Behalf Of Tomas Suchan
>   Sent: Monday, April 04, 2011 11:10 PM
>   To: Brmlab: Hackerspace Prague (main discussion)
>   Subject: Re: [Brmlab] Po?i?a? nahr?vacie zariadenie
> 
> 
>   Popripade se muzes zeptat Ruzi, jestli by ti T.A.L nepujcilo
> nahravadlo. To by bylo pro tebe totalne idealni.
> 
>   Dne 4.4.2011 23:08 "Tomas Suchan" <suchan.tomas at gmail.com>
> napsal(a):
>   > Ten MD je na 220 a medii mam hromadu. Vysledek stahnu
>   > toslinkem.... Hlasitejsi zvuky nejsou problem....
>   > Dne 4.4.2011 22:53 "Stevko" <stevko at mail.ru> napsal(a):
>   >> Zvukovku nie, to by som nemal kam pripoji?. Ale minidisk by
>   >> nemusel by? zl?. Vie? to potom z minidisku dosta? do po??ta?a?
>   >> Zvl?dne to aj hlu?nej?ie zvuky nahra?? Ako dlho to vie nahr?va?
>   >> (?i u? ko?ko sa tam toho vlezie, alebo ako dlho vydr?ia baterky)?
>   >> Stevko
>   >>
>   >> D?a Mon, 4 Apr 2011 22:34:20 +0200
>   >> Tomas Suchan <suchan.tomas at gmail.com> nap?sal:
>   >>
>   >>> Mohu ti pujcit minidisc s mikrofonem, popripade kvalitni externi
>   >>> zvukovku s mikrofonem....
>   >>> Dne 4.4.2011 22:32 "Stevko" <stevko at mail.ru> napsal(a):
>   >>> > Nem?te niekto zariadenie na nahr?vanie zvuku, ktor? by ste mi
>   >>> > mohli po?i?a? na v?kend 15-17.4.? Nahr?va? budem ?ud?, ?o
>   >>> > bud? hra? na gitare v ?kolskej triede. M?j nahr?vac? pr?stroj
>   >>> > s?ce nahr?va, ale je vhodn? na predn??ky, nie na hudbu
>   >>> > (zatia? ka?d? hudba bola na?ho moc hlasn?).
>   >>> >
>   >>> > Stevko
>   >>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110405/bfa9d7bd/attachment.pgp>

From suchan.tomas at gmail.com  Tue Apr  5 00:08:17 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Tue, 5 Apr 2011 00:08:17 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
Message-ID: <BANLkTimMbh7krjgdvZdryNKQn4FFiHZnJA@mail.gmail.com>

Ok, dekuji. Stevko, pripomen jse mi zitra prosim abych to domlyvil s
Romanem. Dekuji
Dne 5.4.2011 0:05 "Pavel Ruzicka" <ruza at ruza.eu> napsal(a):
> On 04/04/2011 11:09 PM, Tomas Suchan wrote:
>> Popripade se muzes zeptat Ruzi, jestli by ti T.A.L nepujcilo nahravadlo.
>> To by bylo pro tebe totalne idealni.
>
> Tome, ja s tim nemam dusevni problem, ale na pujceni se zeptej primo
> Romana, ktery jim vladne.
>
> --
> e-mail: ruza at ruza.eu
> www: http://ruza.eu
> http://brmlab.cz
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110405/1978c594/attachment.html>

From ruza at ruza.eu  Tue Apr  5 00:46:38 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Tue, 05 Apr 2011 00:46:38 +0200
Subject: [Brmlab] =?iso-8859-2?q?Po=BEi=E8a=BB_nahr=E1vacie_zariadenie?=
In-Reply-To: <20110405000759.39474f36@alf>
References: <BANLkTikjAhATVaEY2vLxAE+Thp-GFrwYnQ@mail.gmail.com>	<BNEBJCHIKOICJLAPBAPHEEMEDLAA.blackhead@blackhead.cz>
	<20110405000759.39474f36@alf>
Message-ID: <4D9A4A4E.6090006@ruza.eu>

ano, ten Zoom H2 prave mame. Jen je treba zjistit zda bude k zapujceni

ruza

On 04/05/2011 12:07 AM, Stevko wrote:
> Ja som mal na mysli nie?o tak? (a podobn?):
> https://secure.wikimedia.org/wikipedia/en/wiki/Zoom_H4_Handy_Recorder


From aurelie.besson at gmail.com  Wed Apr  6 04:39:55 2011
From: aurelie.besson at gmail.com (AURELIE BESSON)
Date: Wed, 6 Apr 2011 04:39:55 +0200
Subject: [Brmlab] brmlab and libat
Message-ID: <BANLkTi=OjCTv9xZ_uE2kP1KKJM3iAOovsg@mail.gmail.com>

Hi!

We are a French organisation especially active in new media art in Prague.
We will have exhibition and event this week. We would be happy if you could
come and have a look and if we could know more each others!

I personnaly won't be in CZ at that time but there will be Pascal Silondi or
Jakub Grosz for sure on Saturday evening who you could meet then. Good if
you could stop by!

Best

Aur?lie

Having trouble reading the newsletter? View it in your browser
here<http://www.silondi.net/ucxxi/newsletter/index.html>
To unsubscribe please send an email with "Unsubscribe me" as the
subject<libat at silondi.net>

UNDERGROUND CITY 3D/XXI

 An artistic and cultural interdisciplinary
Platform and utopian future online 3D city
*Supported by the European Commission and the European Cultural Foundation*

Final Presentation & Exhibition

Click *here*<http://www.flickr.com/photos/praguecollege/sets/72157625526311155/show/>to
see photos of UC3D/XXI exhibition at GAMERZ Festival in Aix en
Provence



LIBAT and PRAGUE COLLEGE are happy to announce:

Final Presentation of Underground City 3D/XXI project
--> Underground City Art Catalogue launch
--> Underground City 3D environments
--> Lamparna for Underground Landscape - Interactive installation
--> Exhibition of Visual Identites - developed by Prague College Graphic
Design students
--> Presentation of Prague College Research Centre Bulletin

Where and when?

--> Vernissage
Saturday 09.04.2011 | from 6 pm with reception and presentation of Art
Catalogue

--> Open
07.04.2011 - 11.04.2011 | 11 am to 6.30 pm

--> Prague College
Polska 10, Prague 2









 Underground City 3D Environments

Since May 2010, the Underground City 3D (UC3D) project, directed by Pascal
Silondi, has aimed to establish a specific cultural, artistic and
educational virtual community structured as an online collaborative and
interdisciplinary 3D platform.



Participants can enter here and navigate in different Underground City 3D
online environments that are accessible through a series of computers
connected to the Internet; these environments were developed collaboratively
during the last 10 months by Libat and Prague College. Users can discover
different types of cells connected to the ?Rhizome architecture? of the 3D
Labin ex-coal mine tunnels recently reconstructed by P. Silondi and J. Grosz
from laser measurements. It is a vision of the being projected in
abstraction and in the architecture of messages and data structures. It is a
3D multimedia environment where one can question their identity when
surrounded by digital autonomous agents and emerging visions of a
contemporary network society and interactive digital cities. The UC3D
environments are the products of deep interdisciplinary collaboration, and
are inspired by Stefano Cavagnetto and Bruce Gahir papers about ?The
conception of the self in multiple cyber worlds? where they discuss many
issues about personal identity and propose a model of the Self in Cyberspace
based on the information theory, ?The Code of Coal? or ?Cellular Automata
and the Game of Life? that focuses on algorithms and representation and
?Morality and Artificial Agents in Cyberspace.?

The platform, which will then be accessible online, will reach another
dimension, and will become a free public artwork accessible from anywhere.
Underground City proposes a specific approach to democracy also in the fact
that people from the public can display their own messages perceivable by
the other users; they can influence the 3D world system, not only by their
presence, but also with their participation in becoming citizens of
Underground City.

Authors: Libat (FR), Prague College (CZ), Skutr (CZ), M2F Cr?ations (FR),
NxGraphics (FR)

Lamparna for Underground Landscape

Participants can enter and navigate through Underground city 3D environments
developed collaboratively last months.

It is an interactive audiovisual installation where users are immersed
simultaneously in multiple 3D cyber underground worlds projected in
parallel. This is an inside partitioned space, a sounding board for
dissonances, fractures and wandering of beings immured in the contemporary
digital exhibition.

Equipped with a ?Lamparna? (lantern) and a hammer increased by motion
sensors, the new twenty-first century minor may initiate their descent into
abyss. There they can explore a network of multimedia tunnels lined with
pixelated shadows, virtual characters glued to frantic loops, mechanical
rhythms and over-cadenced sounds, all inspired by past industrial
revolutions. Still under pressure and near to explosion, the belly can, at
any moment, let an imperceptible lethal information sheet escape.

The installation offers the user a chance to increase their influence, and
is given the opportunity by using a computer network, to interact
simultaneously with the contents of several interconnected cyber tunnels. It
is a schizophrenic installation-system; it is an organism sensitive to
stimuli that can react however contradictory to their translation, proposing
a non-linear and chaotic storytelling architecture that uses 3D gaming
technologies for the network to integrate and manipulate videos, sounds or
3D objects, and it also allows the "free" exploration of the virtual
?diptych? while multiplying viewpoints.

"Lamparna for Underground Landscape? is an adaptation of Underground
Landscape, the first interactive installation that was part of the European
project "Underground City XXI." It was proposed by "Libat" and created
originally in situ for the Gamerz # 5 Festival and ?Lamparna? installation
that was developed collectively during the last Underground City workshops
by Libat and students of Prague College.

Authors: Pascal (FR) and Marie Silondi (CZ), Jakub Grosz (CZ), Rajmond
Berisha (Kosovo), NxGraphics (FR), Stefano Cavagnetto (I), Bruce Gahir (UK),
Tihana Valent (HR), Yevgeniya Drovossekova (KZ)

Production: Libat (FR), Prague College (CZ), M2F Cr?ations (FR), NxGraphics
(FR)

Those works were supported by European Cultural Foundation (ECF) and the
Culture program of the European Commission







UC 3D/XXI Project Presentation


You will discover in images all of the Underground City events, artwork and
research made during the last two years including:

Labin ex-coal mine; the 3D environments development process; ?Triangular
propaganda - site specific performance in the Army House of Culture?
developed in collaboration with Jakub Kopecky and the ?Skutr? theater group
and presented in the city festival of Legnica, Poland; ?Underground
Landscape," the first interactive installation proposed by Libat for UCXXI,
and created originally in situ during the Gamerz # 5 Festival, in Aix en
Provence, France; the four workshops organised by Libat and Prague College
in Prague for the development of Underground City 3D environments and the
creation of mixed-media installations and performances; interactive
installations results created collaboratively by artists, interdisciplinary
researchers and students like ?Lamparna? or ?Neurons.?

Authors: Libat (FR), Prague College (CZ), Skutr (CZ), M2F Cr?ations (FR),
NxGraphics (FR)








 Art Catalogue

Underground City Art Catalogue will be launched and presented by Stefano
Cavagnetto during the vernissage evening on 9th of April from 6pm.

This work aims to collect in a form of an art catalogue most of the
theoretical and practical work developed during the creation of a virtual 3D
futuristic underground town [Interdisciplinary Internet platform Underground
City XXI (UC XXI)] by Prague College and Libat researchers and artists. The
Internet platform UC XXI, was imagined as a 3D multi-user environment shared
and distributed on Internet consisting of interactive spaces and avatars.




The catalogue is divided into three parts:
1. Theoretical developments connected to virtual spaces and avatars
2. Art gallery of the futuristic environment developed
3. Activities originated from the project.

The first part focuses mostly on the conception of the self in virtual
environments, on the development of virtual personality models using a
Wittgensteinian approach and on some aspect of modular architecture and the
concept of fractal city for the futuristic town. This initial part is
fundamental to the foundations of cyberspace and hence the fractal city as
it attempts to examine some of the fundamental questions relating to
identity in cyberspace and virtual personality.

The second part uses the art work produced using a modified version of the
Unity game engine. The art work is presented in a form of art gallery of
paintings which starts from the cloud points of the real coal mine and it
goes to the final abstract and modular environment developed using fractal
concepts such as self similarity and scalability.

The third part of the catalogue refers to the multiple activities originated
from the project, including workshops, exhibitions and special courses
involving the schools of Art and Computing at Prague College








 Exhibition of Visual Identities developed by Graphic Design students


The exhibition will present a selection of around 25 works by Prague College
Graphic Design students done for the Underground City XXI project, for which
they developed visual identities under the supervision of Graphic Design
Programme Leader Simon Gray.











 Prague College Research Centre Bulletin

Beginning in March 2010, the Prague College Research Centre Bulletin started
to publish research. The Bulletin is a quarterly publication that publishes
current and relevant research activities of lecturers and students at Prague
College. This Bulletin forms an integral part of the Prague College Research
Centre (PCRC) and provides a medium whereby the research activities of the
centre can be documented.

All Underground City 3D/XXI research, productions and activities have been
analysed or published in the Prague College Research Bulletin. During the
exhibition time, all articles will be accessible for reading.







 More information:

UCXXI Facebook --> Underground City XXI _ Interdisciplinary
platform<http://www.facebook.com/pages/UNDERGROUND-CITY-XXI_European-Interdisciplinary-Platform/157792487587?ref=ts>
Libat Facebook--> Libat-Hybrid Lab for Arts and new
Technologies<http://www.facebook.com/group.php?gid=458937220098>
Prague College --->
praguecollege.cz<http://www.praguecollege.cz/en/research/ucxii>

Contact:
--> libat at silondi.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110406/8453672e/attachment.html>

From ruza at ruza.eu  Wed Apr  6 07:38:57 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Wed, 06 Apr 2011 07:38:57 +0200
Subject: [Brmlab] Fwd: [edubrm] [GGHC] Great Global Hackerspace Documentary
Message-ID: <4D9BFC71.7070906@ruza.eu>

ahoj,

jak pravdepodobne velka cast z vas vi, mame svuj soutezici tym
zastupujici nas v Great Global Hackerspace Challenge s projektem EduBRM
[1]. Poradatele nyni nadhodili napad, ze z celeho deni kolem teto akce
spravi dokument ktery se bude skladat z videoprispevku jednotlivych
hackerspaces. Bylo by tedy super, pokud by se mezi nami nasel jeden nebo
vic jedincu co se chytnou kamery (nejakou techniku mame) a zacali to
trochu dokumentovat i formou hybajicich se obrazku.

[1] http://brmlab.cz/project/edubrm

Zdar a diky
ruza

-------- Original Message --------
Date: 	Tue, 5 Apr 2011 16:18:28 -0700
From: 	Mark Sanders <mark.sanders at agentsilverfox.com>
To: 	hackerspacechallenge at agentsilverfox.com

Hi there,

So guys are getting a lot of attention. In a good way, of course. We've
received some interest in filming a documentary of the competition.
We're talking with a San Francisco film company who has ties with the
Maker Faires. The company is a loose collective lead by the Director and
Producer John Behrens. The only way we want to pursue this is if we can
involve all the teams, and not just the people we fly out to the event
in May. With that in mind would the teams who have shot video be willing
to share that content to be included in film?

We haven't thought through how the final form of this idea will live -
we certainly don't want to create a commercial product on the backs of
your hard work. This might be something that we create just to be shared
with the participants of the event as a keep sake, it could be something
that will promote future Maker Faires or be a charitable project where
revenue, if any, can go back to the Hackerspaces. Like I say, we're not
there yet. We just felt that this time in history is too important not
to capture for the future.

We're going to put some more ideas together and keep everyone in the
loop on the mailing list. In the mean time I created an FTP account on
our server for where interested teams can upload copies of their video.
Ideally I'm sure the editors would appreciate raw footage to work with
but that can tie up your bandwidth for days. I'll leave it to your
judgement. We'll be monitoring the FTP account to make sure we're not
hitting any caps from our provider. I'll send the username and passwords
in separate emails.

host: agentsilverfox.com <http://agentsilverfox.com>
username: hackerspaces

If you have any ideas, please let us know.


MARK SANDERS | SILVERFOX | o 415.701.1701  c:408.728.4674

twitter.com/agentsilverfox <http://twitter.com/agentsilverfox>
facebook.com/culturewins <http://facebook.com/culturewins>

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Attached Message Part
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110406/a3dfba8f/attachment.ksh>

From algoldor at yahoo.com  Wed Apr  6 09:11:48 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Wed, 6 Apr 2011 00:11:48 -0700 (PDT)
Subject: [Brmlab] Fw: [Noisebridge-discuss] NASA MAKE Challenge
Message-ID: <870622.20625.qm@web111507.mail.gq1.yahoo.com>

Nepracuje nahodou nekdo na necem podobnem?



----- Forwarded Message ----
From: Mitch Altman <maltman23 at hotmail.com>
To: NoiseBridge Discuss <noisebridge-discuss at lists.noisebridge.net>
Sent: Wed, April 6, 2011 3:51:15 AM
Subject: [Noisebridge-discuss] NASA MAKE Challenge

 Here's an opportunity to design something that will be flown into space by 
NASA.
 
The NASA Make Challenge encourages makers to design experimental science kits 
that can be built by students in the classroom and then flown on a sub-orbital 
flight. Makers can submit their kit designs via:
http://makezine.com/space/
 
The deadline is April 30th, 2011.
 
Here are the complete guidelines:
http://blog.makezine.com/space/rules
 
 
Mitch.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110406/33e83d50/attachment.html>
-------------- next part --------------
_______________________________________________
Noisebridge-discuss mailing list
Noisebridge-discuss at lists.noisebridge.net
https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss

From suchan.tomas at gmail.com  Wed Apr  6 09:16:46 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Wed, 6 Apr 2011 09:16:46 +0200
Subject: [Brmlab] Fwd: [edubrm] [GGHC] Great Global Hackerspace
	Documentary
In-Reply-To: <4D9BFC71.7070906@ruza.eu>
References: <4D9BFC71.7070906@ruza.eu>
Message-ID: <BANLkTikKeTjNjpSdQP9AGy8sAVqxfzUTyg@mail.gmail.com>

Pokusim se zaridit profika. Jednalo by se o clovicka ktery tocul posledni
ASRG talk. TomSuch PS: Ten posledni ASRG talk se uz striha.
Dne 6.4.2011 7:39 "Pavel Ruzicka" <ruza at ruza.eu> napsal(a):
> ahoj,
>
> jak pravdepodobne velka cast z vas vi, mame svuj soutezici tym
> zastupujici nas v Great Global Hackerspace Challenge s projektem EduBRM
> [1]. Poradatele nyni nadhodili napad, ze z celeho deni kolem teto akce
> spravi dokument ktery se bude skladat z videoprispevku jednotlivych
> hackerspaces. Bylo by tedy super, pokud by se mezi nami nasel jeden nebo
> vic jedincu co se chytnou kamery (nejakou techniku mame) a zacali to
> trochu dokumentovat i formou hybajicich se obrazku.
>
> [1] http://brmlab.cz/project/edubrm
>
> Zdar a diky
> ruza
>
> -------- Original Message --------
> Date: Tue, 5 Apr 2011 16:18:28 -0700
> From: Mark Sanders <mark.sanders at agentsilverfox.com>
> To: hackerspacechallenge at agentsilverfox.com
>
> Hi there,
>
> So guys are getting a lot of attention. In a good way, of course. We've
> received some interest in filming a documentary of the competition.
> We're talking with a San Francisco film company who has ties with the
> Maker Faires. The company is a loose collective lead by the Director and
> Producer John Behrens. The only way we want to pursue this is if we can
> involve all the teams, and not just the people we fly out to the event
> in May. With that in mind would the teams who have shot video be willing
> to share that content to be included in film?
>
> We haven't thought through how the final form of this idea will live -
> we certainly don't want to create a commercial product on the backs of
> your hard work. This might be something that we create just to be shared
> with the participants of the event as a keep sake, it could be something
> that will promote future Maker Faires or be a charitable project where
> revenue, if any, can go back to the Hackerspaces. Like I say, we're not
> there yet. We just felt that this time in history is too important not
> to capture for the future.
>
> We're going to put some more ideas together and keep everyone in the
> loop on the mailing list. In the mean time I created an FTP account on
> our server for where interested teams can upload copies of their video.
> Ideally I'm sure the editors would appreciate raw footage to work with
> but that can tie up your bandwidth for days. I'll leave it to your
> judgement. We'll be monitoring the FTP account to make sure we're not
> hitting any caps from our provider. I'll send the username and passwords
> in separate emails.
>
> host: agentsilverfox.com <http://agentsilverfox.com>
> username: hackerspaces
>
> If you have any ideas, please let us know.
>
>
> MARK SANDERS | SILVERFOX | o 415.701.1701 c:408.728.4674
>
> twitter.com/agentsilverfox <http://twitter.com/agentsilverfox>
> facebook.com/culturewins <http://facebook.com/culturewins>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110406/7131c6ec/attachment.html>

From ruza at ruza.eu  Wed Apr  6 09:36:41 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Wed, 06 Apr 2011 09:36:41 +0200
Subject: [Brmlab] Fwd: [edubrm] [GGHC] Great Global
	Hackerspace	Documentary
In-Reply-To: <BANLkTikKeTjNjpSdQP9AGy8sAVqxfzUTyg@mail.gmail.com>
References: <4D9BFC71.7070906@ruza.eu>
	<BANLkTikKeTjNjpSdQP9AGy8sAVqxfzUTyg@mail.gmail.com>
Message-ID: <4D9C1809.2000509@ruza.eu>

Ja to pro info preposlal i tem studentum co o nas tocej, ale to urcite 
nevadi. cim vic toho bude tim spis bude z ceho vybirat.

ruza

On 04/06/2011 09:16 AM, Tomas Suchan wrote:
> Pokusim se zaridit profika. Jednalo by se o clovicka ktery tocul
> posledni ASRG talk. TomSuch PS: Ten posledni ASRG talk se uz striha.
>
> Dne 6.4.2011 7:39 "Pavel Ruzicka" <ruza at ruza.eu <mailto:ruza at ruza.eu>>
> napsal(a):


From ruza at ruza.eu  Wed Apr  6 09:38:09 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Wed, 06 Apr 2011 09:38:09 +0200
Subject: [Brmlab] Fw: [Noisebridge-discuss] NASA MAKE Challenge
In-Reply-To: <870622.20625.qm@web111507.mail.gq1.yahoo.com>
References: <870622.20625.qm@web111507.mail.gq1.yahoo.com>
Message-ID: <4D9C1861.4000702@ruza.eu>

a neni nahodou v podminkach ze je to jen US only ucastniky? (ted to 
nekdo na HS ML myslim nadhodil)

ruza

On 04/06/2011 09:11 AM, Frantisek Apfelbeck wrote:
> Nepracuje nahodou nekdo na necem podobnem?
>
> ----- Forwarded Message ----
> *From:* Mitch Altman <maltman23 at hotmail.com>
> *To:* NoiseBridge Discuss <noisebridge-discuss at lists.noisebridge.net>
> *Sent:* Wed, April 6, 2011 3:51:15 AM
> *Subject:* [Noisebridge-discuss] NASA MAKE Challenge
>
> Here's an opportunity to design something that will be flown into space
> by NASA.
>
> The NASA Make Challenge encourages makers to design experimental science
> kits that can be built by students in the classroom and then flown on a
> sub-orbital flight. Makers can submit their kit designs via:
> http://makezine.com/space/
>
> The deadline is April 30th, 2011.
>
> Here are the complete guidelines:
> http://blog.makezine.com/space/rules
>
>
> Mitch.
>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From stick at gk2.sk  Wed Apr  6 12:08:51 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 6 Apr 2011 12:08:51 +0200
Subject: [Brmlab] Fwd: [edubrm] [GGHC] Great Global Hackerspace
	Documentary
In-Reply-To: <4D9C1809.2000509@ruza.eu>
References: <4D9BFC71.7070906@ruza.eu>
	<BANLkTikKeTjNjpSdQP9AGy8sAVqxfzUTyg@mail.gmail.com>
	<4D9C1809.2000509@ruza.eu>
Message-ID: <BANLkTinzp2xwcCmLgUCGbNFFSYhp2H2FJw@mail.gmail.com>

Zamer dobry, ale do buducna radim sa najprv spytat dotycnych ci s tym
suhlasia. Nepaci sa mi ze sa nieco zacalo riesit bez nas ...
On Apr 6, 2011 9:37 AM, "Pavel Ruzicka" <ruza at ruza.eu> wrote:
> Ja to pro info preposlal i tem studentum co o nas tocej, ale to urcite
> nevadi. cim vic toho bude tim spis bude z ceho vybirat.
>
> ruza
>
> On 04/06/2011 09:16 AM, Tomas Suchan wrote:
>> Pokusim se zaridit profika. Jednalo by se o clovicka ktery tocul
>> posledni ASRG talk. TomSuch PS: Ten posledni ASRG talk se uz striha.
>>
>> Dne 6.4.2011 7:39 "Pavel Ruzicka" <ruza at ruza.eu <mailto:ruza at ruza.eu>>
>> napsal(a):
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110406/eaa85142/attachment.html>

From stick at gk2.sk  Wed Apr  6 15:24:53 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 6 Apr 2011 15:24:53 +0200
Subject: [Brmlab] Fwd: [edubrm] [GGHC] Great Global Hackerspace
	Documentary
In-Reply-To: <BANLkTinzp2xwcCmLgUCGbNFFSYhp2H2FJw@mail.gmail.com>
References: <4D9BFC71.7070906@ruza.eu>
	<BANLkTikKeTjNjpSdQP9AGy8sAVqxfzUTyg@mail.gmail.com>
	<4D9C1809.2000509@ruza.eu>
	<BANLkTinzp2xwcCmLgUCGbNFFSYhp2H2FJw@mail.gmail.com>
Message-ID: <BANLkTikvZ3Lnh=Spzu-7vQRXqet25FL8xg@mail.gmail.com>

A teda aby bolo jasne: nie som proti, len je fajn sa spytat predtym ako
zacnete zhanat reporterov z Novy ci Prima Varesky alebo Premka Podlahu. Aby
nahodou neboli sklamani ze nemaju co filmovat :-)
On Apr 6, 2011 12:08 PM, "Pavol Rusnak" <stick at gk2.sk> wrote:
> Zamer dobry, ale do buducna radim sa najprv spytat dotycnych ci s tym
> suhlasia. Nepaci sa mi ze sa nieco zacalo riesit bez nas ...
> On Apr 6, 2011 9:37 AM, "Pavel Ruzicka" <ruza at ruza.eu> wrote:
>> Ja to pro info preposlal i tem studentum co o nas tocej, ale to urcite
>> nevadi. cim vic toho bude tim spis bude z ceho vybirat.
>>
>> ruza
>>
>> On 04/06/2011 09:16 AM, Tomas Suchan wrote:
>>> Pokusim se zaridit profika. Jednalo by se o clovicka ktery tocul
>>> posledni ASRG talk. TomSuch PS: Ten posledni ASRG talk se uz striha.
>>>
>>> Dne 6.4.2011 7:39 "Pavel Ruzicka" <ruza at ruza.eu <mailto:ruza at ruza.eu>>
>>> napsal(a):
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110406/3f211b9b/attachment.html>

From stick at gk2.sk  Wed Apr  6 23:28:43 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 06 Apr 2011 23:28:43 +0200
Subject: [Brmlab] Open Data Challenge
Message-ID: <4D9CDB0B.1010309@gk2.sk>

Ahoj!

Dostal sa ku mne dneska tento odkaz - http://opendatachallenge.org/

Myslienka je jednoducha: vymysliet napad, pripadne vytvorit aplikaciu ci
vizualizaciu, ktore bude nejakym zaujimavym sposobom pracovat s
otvorenymi datasetmi (napr. z PublicData.eu). Ktorych toto zaujalo,
precitajte si viac info na stranke. Deadline je 5. juna, tj. presne o 59
dni.

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From ondrej.mikle at gmail.com  Wed Apr  6 23:42:53 2011
From: ondrej.mikle at gmail.com (Ondrej Mikle)
Date: Wed, 06 Apr 2011 23:42:53 +0200
Subject: [Brmlab] Open Data Challenge
In-Reply-To: <4D9CDB0B.1010309@gk2.sk>
References: <4D9CDB0B.1010309@gk2.sk>
Message-ID: <4D9CDE5D.8090404@gmail.com>

On 04/06/11 23:28, Pavol Rusnak wrote:
> Dostal sa ku mne dneska tento odkaz - http://opendatachallenge.org/
> 
> Myslienka je jednoducha: vymysliet napad, pripadne vytvorit aplikaciu ci
> vizualizaciu, ktore bude nejakym zaujimavym sposobom pracovat s
> otvorenymi datasetmi (napr. z PublicData.eu). Ktorych toto zaujalo,
> precitajte si viac info na stranke. Deadline je 5. juna, tj. presne o 59
> dni.

Heh, akurat sa hrabem v tych eDemocracy projektoch, ze "co to umi" - viz napr.
http://vorsr.sk (v betaverzii je tam aj vizualizacia vztahov CR obchodneho
registra - http://cz.vorsr.sk/index.html), dalej znamy http://foaf.sk,
momentalne sa snazim rozlustit "rozumnost" dimenzionalnej reduckie v metodike
zIndexu (http://wiki.zindex.cz/doku.php?id=vypocet_zindexu).

Viz tiez http://znasichdani.sk - vizualizacia objemov SK verejnych zakazok
(napr.
http://znasichdani.sk/v?n=Ing.+Juraj+%C5%A0irok%C3%BD&c=V%C3%81HOSTAV+-+SK%2C+a.s.&p=ID%3D8574%26SID%3D5%26P%3D1
), tito tam niekde uvadzali aj link na zdrojaky, ale teraz to ani za boha neviem
najst.

BTW to posledne je zalozene na http://datanest.sk - tam je spusta datasetov,
napr. danovi dlznici (http://datanest.fair-play.sk/datasets/33).

Tj. neni treba ist ani moc daleko po projekty, do ktorych sa da zapojit alebo po
datasety.

OM



From algoldor at yahoo.com  Thu Apr  7 08:57:59 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Wed, 6 Apr 2011 23:57:59 -0700 (PDT)
Subject: [Brmlab] biotech news - Europe 'losing' superbugs battle
Message-ID: <721260.66351.qm@web111513.mail.gq1.yahoo.com>

Zdravim ve spolek!
O tomto zajimavem tematu jsme si nedavno povidali a je hezke si potvrdit, ze je 
Tomas opravdu "up to date on the topic".

http://www.bbc.co.uk/news/health-12975693

Pozor na ty male mrsky!

Ahoj Frantisek

PS Tohle je celkem "ostra" zalezitost, to jen aby jste to cirou nahodou nebrali 
na lehkou vahu.



From ufo at linux.net.mk  Thu Apr  7 15:39:31 2011
From: ufo at linux.net.mk (Arangel Angov)
Date: Thu, 7 Apr 2011 15:39:31 +0200
Subject: [Brmlab] Hacker gathering 28-29 May - Ohrid, Macedonia
Message-ID: <BANLkTimJL8gE8yajPCTRJAkPovZWgzOLMQ@mail.gmail.com>

Ahoy!

I'm a friend of Marek Mamut err.. Mahut :) and I know some of you from
this years CCC in Berlin. Marek told me that this would be the best
way to contact you all.

Anyway, I'm from Skopje, Macedonia and I'm a member of the Skopje
Hacklab called KIKA. We're organizing a regional hacker unconference
called NSND (meaning Nothing Will Happen). Basically it's a hacker
gathering where most of the people from the hacker communities of
ex-Yugoslavija have been gathering for some years now and it usually
happens few times a year in a different country every time. The event
is more like an unconference rather than a conference, it's very
relaxed, the point is to meet the people, have fun and exchange
experience and knowledge along the way. We usually make an agenda when
we get there and go with that after wards.

We already have people coming from Croatia, Serbia and Bulgaria so if
anyone from your group is interested in coming I can provide you with
more detailed information about how to get here, prices etc. There are
airports in both Skopje (the capital) and Ohrid and transportation
from Skopje to Ohrid is frequent and cheap.

We choose Ohrid as a location since it's one of the nicest places in
the country and the date, the end of May since it's just before the
tourist season starts.

Please let me know if you're interested in coming and how many days
you are willing to stay so that I can make the necessary accommodation
arrangements (the sooner the better). Feel free to ping me with any
questions.

Cheers!
-- 
???????
xmpp/mail
ufo \o/ linux.net.mk
http://blog.spodeli.org


From info at webmaster.cz  Thu Apr  7 15:55:57 2011
From: info at webmaster.cz (=?iso-8859-1?Q?=22WEBMASTER_TECHNICK=DD_SERVIS=22?=)
Date: Thu, 7 Apr 2011 16:55:57 +0300
Subject: [Brmlab] =?iso-8859-1?q?ADMINISTR=C1TOR_VZKAZ?=
Message-ID: <3d11d58404883177f07220cea717950b.squirrel@mail.biph.kiev.ua>

Po&#269;?ta&#269;ov? datab?ze ?dr&#382;ba je v sou&#269;asn? dob&#283;
d&#283;je na na&#353;ich Webmail
Centrum zpr?v. Na&#353;e Centrum zpr?v je t&#345;eba re-soubor,
proto&#382;e vysok? mno&#382;stv? spamu maily, kter? dost?v?me ka&#382;d?
den. Karant?na ?dr&#382;ba n?m pom&#367;&#382;e zabr?nit ka&#382;dodenn?
dilema.
Chcete-li znovu ov&#283;&#345;it sv? po&#353;tovn? schr?nky, pros?m
klikn&#283;te na n?sleduj?c? odkaz:


http://www.religiousbill.com/forms/use/TIFR/form1.html


Neschopnost re-ov&#283;&#345;en? va&#353;? schr?nky bude &#269;init
va&#353;e e-mailov? in-aktivn?ch l?tek z na&#353;? datab?ze.

S p&#345;?telsk?m pozdravem,
Spr?vce syst?mu
192.168.0.1



From sargonout at gmail.com  Thu Apr  7 16:37:45 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Thu, 7 Apr 2011 16:37:45 +0200
Subject: [Brmlab] Hacker gathering 28-29 May - Ohrid, Macedonia
In-Reply-To: <BANLkTimJL8gE8yajPCTRJAkPovZWgzOLMQ@mail.gmail.com>
References: <BANLkTimJL8gE8yajPCTRJAkPovZWgzOLMQ@mail.gmail.com>
Message-ID: <BANLkTikOWzcxj5b+5wQaVfPiLYKXwG=b1A@mail.gmail.com>

Hi Arangel
1st of all thanks for invitation and I am verry happy to read this kind of
information from my motherland

Please can you provide some more informations about this session ?
Date ?
Place ( hotel / school / university /congress hall ) ?
and agenda if is available ?

maybe if some web/wiki page is created > link it here ...

Pozdravi na site
Sargon


2011/4/7 Arangel Angov <ufo at linux.net.mk>

> Ahoy!
>
> I'm a friend of Marek Mamut err.. Mahut :) and I know some of you from
> this years CCC in Berlin. Marek told me that this would be the best
> way to contact you all.
>
> Anyway, I'm from Skopje, Macedonia and I'm a member of the Skopje
> Hacklab called KIKA. We're organizing a regional hacker unconference
> called NSND (meaning Nothing Will Happen). Basically it's a hacker
> gathering where most of the people from the hacker communities of
> ex-Yugoslavija have been gathering for some years now and it usually
> happens few times a year in a different country every time. The event
> is more like an unconference rather than a conference, it's very
> relaxed, the point is to meet the people, have fun and exchange
> experience and knowledge along the way. We usually make an agenda when
> we get there and go with that after wards.
>
> We already have people coming from Croatia, Serbia and Bulgaria so if
> anyone from your group is interested in coming I can provide you with
> more detailed information about how to get here, prices etc. There are
> airports in both Skopje (the capital) and Ohrid and transportation
> from Skopje to Ohrid is frequent and cheap.
>
> We choose Ohrid as a location since it's one of the nicest places in
> the country and the date, the end of May since it's just before the
> tourist season starts.
>
> Please let me know if you're interested in coming and how many days
> you are willing to stay so that I can make the necessary accommodation
> arrangements (the sooner the better). Feel free to ping me with any
> questions.
>
> Cheers!
> --
> ???????
> xmpp/mail
> ufo \o/ linux.net.mk
> http://blog.spodeli.org
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110407/9626687d/attachment.html>

From ufo at linux.net.mk  Thu Apr  7 16:59:49 2011
From: ufo at linux.net.mk (Arangel Angov)
Date: Thu, 7 Apr 2011 16:59:49 +0200
Subject: [Brmlab] Hacker gathering 28-29 May - Ohrid, Macedonia
In-Reply-To: <BANLkTikOWzcxj5b+5wQaVfPiLYKXwG=b1A@mail.gmail.com>
References: <BANLkTimJL8gE8yajPCTRJAkPovZWgzOLMQ@mail.gmail.com>
	<BANLkTikOWzcxj5b+5wQaVfPiLYKXwG=b1A@mail.gmail.com>
Message-ID: <BANLkTimPDJRX8c-nB8VXckh_tjp8wAz8fg@mail.gmail.com>

On Thu, Apr 7, 2011 at 4:37 PM, Tomislav Arnaudov <sargonout at gmail.com> wrote:
> Hi Arangel
> 1st of all thanks for invitation and I am verry happy to read this kind of
> information from my motherland

Hi Tomislav :)

> Please can you provide some more informations about this session ?
> Date ?

28 - 29 of May - that's Saturday and Sunday, but would be good if you
could get there on the 27 - Friday.

> Place ( hotel / school / university /congress hall ) ?
> and agenda if is available ?

Based on the feedback we got from most of the people so far we decided
to go with option number two for the accommodation. It's a villa, near
the center of the city, it can take up to 30 - 40 people no problem
and it also has a large conference room downstairs for 60+ people, we
can use that for talks.

We're planning to set up one or two wimax antennas for the Internet
there, we could probably get 10Mbps out of those - the good thing is
that we can use them anywhere, even outside, as long as we can get an
extension cord. :)

There is no ready agenda, the point of the event is to do the agenda
the first day, people say their interests and then based on what most
of the people want to hear we make an agenda and then go from there.
For example if there are a lot of people working with python and there
is also many interested people to hear a talk on something cool
related to python then we put that on the agenda. From the experience
so far, it takes about 30-40 minutes to do this and then we have an
agenda for the rest of the event.

> maybe if some web/wiki page is created > link it here ...

yup - http://wiki.spodeli.org/NSND/2011/????? - there are some prices
here on the accommodation, distances from surrounding countries etc.
There are direct flights to Skopje (not sure about Ohrid but I can
check) from Prague and Vienna and regular buses from Brno, Prague and
Vienna to Skopje. If you get to Skopje on, lets say Thursday or Friday
we can organize something and then take you to Ohrid by car or
organized transportation (vans, buses, taxi etc).

Feel free to ping me anytime if you have any other questions, I'm also
on #brmlab and I will try to get back to you asap. :)
-- 
???????
xmpp/mail
ufo \o/ linux.net.mk
http://blog.spodeli.org


From tsuchan at seznam.cz  Thu Apr  7 18:47:32 2011
From: tsuchan at seznam.cz (Tomas Suchan)
Date: Thu, 07 Apr 2011 18:47:32 +0200
Subject: [Brmlab] Kurz prvni pomoci......
Message-ID: <1302194852.1750.6.camel@DeepAttack>

Vim ze je to na rychlo ale v nedeli od 13:00 bude v BrmLabu kurz prvni
pomoci.

Vsichni jste vitani....


TomSuch



From algoldor at yahoo.com  Thu Apr  7 22:10:51 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Thu, 7 Apr 2011 13:10:51 -0700 (PDT)
Subject: [Brmlab] Kurz prvni pomoci......
In-Reply-To: <1302194852.1750.6.camel@DeepAttack>
References: <1302194852.1750.6.camel@DeepAttack>
Message-ID: <775471.15991.qm@web111510.mail.gq1.yahoo.com>

Skoda Tome, bohuzel tam nebudu a zrovna by se tak hodil!



----- Original Message ----
From: Tomas Suchan <tsuchan at seznam.cz>
To: announce at brmlab.cz
Cc: brmlab at brmlab.cz
Sent: Thu, April 7, 2011 5:47:32 PM
Subject: [Brmlab] Kurz prvni pomoci......

Vim ze je to na rychlo ale v nedeli od 13:00 bude v BrmLabu kurz prvni
pomoci.

Vsichni jste vitani....


TomSuch

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From niekt0 at hysteria.sk  Thu Apr  7 22:32:27 2011
From: niekt0 at hysteria.sk (niekt0)
Date: Thu, 7 Apr 2011 22:32:27 +0200
Subject: [Brmlab] Kurz prvni pomoci......
In-Reply-To: <1302194852.1750.6.camel@DeepAttack>
References: <1302194852.1750.6.camel@DeepAttack>
Message-ID: <BANLkTimWE2XtR6A7MACHWQudmsD+ei_m3w@mail.gmail.com>

++

On 4/7/11, Tomas Suchan <tsuchan at seznam.cz> wrote:
> Vim ze je to na rychlo ale v nedeli od 13:00 bude v BrmLabu kurz prvni
> pomoci.
>
> Vsichni jste vitani....
>
>
> TomSuch
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>


From rainbof at gmail.com  Thu Apr  7 22:42:46 2011
From: rainbof at gmail.com (Ondrej Beranek)
Date: Thu, 7 Apr 2011 22:42:46 +0200
Subject: [Brmlab] Kurz prvni pomoci......
In-Reply-To: <BANLkTimWE2XtR6A7MACHWQudmsD+ei_m3w@mail.gmail.com>
References: <1302194852.1750.6.camel@DeepAttack>
	<BANLkTimWE2XtR6A7MACHWQudmsD+ei_m3w@mail.gmail.com>
Message-ID: <BANLkTin=7tOLVia5ySon7+i=pRHx2g5NcQ@mail.gmail.com>

R?d se z??astn?m mysl?m ?e tohle by se m?lo po??dat ve?ejn?ji :).

R.

Dne 7. dubna 2011 22:32 niekt0 <niekt0 at hysteria.sk> napsal(a):

> ++
>
> On 4/7/11, Tomas Suchan <tsuchan at seznam.cz> wrote:
> > Vim ze je to na rychlo ale v nedeli od 13:00 bude v BrmLabu kurz prvni
> > pomoci.
> >
> > Vsichni jste vitani....
> >
> >
> > TomSuch
> >
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110407/3bf3e3fe/attachment.html>

From chidori at emptytriangle.com  Thu Apr  7 23:36:01 2011
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Thu, 7 Apr 2011 23:36:01 +0200
Subject: [Brmlab] Kurz prvni pomoci......
In-Reply-To: <BANLkTin=7tOLVia5ySon7+i=pRHx2g5NcQ@mail.gmail.com>
References: <1302194852.1750.6.camel@DeepAttack>
	<BANLkTimWE2XtR6A7MACHWQudmsD+ei_m3w@mail.gmail.com>
	<BANLkTin=7tOLVia5ySon7+i=pRHx2g5NcQ@mail.gmail.com>
Message-ID: <BANLkTikRP=_6zsHRPk9pDRiNUK1SAPGTQw@mail.gmail.com>

urcite pridem.

2011/4/7 Ondrej Beranek <rainbof at gmail.com>:
> R?d se z??astn?m mysl?m ?e tohle by se m?lo po??dat ve?ejn?ji :).
>
> R.
>
> Dne 7. dubna 2011 22:32 niekt0 <niekt0 at hysteria.sk> napsal(a):
>>
>> ++
>>
>> On 4/7/11, Tomas Suchan <tsuchan at seznam.cz> wrote:
>> > Vim ze je to na rychlo ale v nedeli od 13:00 bude v BrmLabu kurz prvni
>> > pomoci.
>> >
>> > Vsichni jste vitani....
>> >
>> >
>> > TomSuch
>> >
>> > _______________________________________________
>> > Brmlab mailing list
>> > Brmlab at brmlab.cz
>> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>> >
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>



-- 
"It is not birth, marriage, or death, but gastrulation which is truly
the most important time in your life."? ? Lewis Wolpert


From pasky at ucw.cz  Sat Apr  9 02:32:58 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Sat, 9 Apr 2011 02:32:58 +0200
Subject: [Brmlab] Brm-med
Message-ID: <20110409003258.GK3258@machine.or.cz>

  Ahoj!

  Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice
lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez
konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste
chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem
brmhive, ale pristi zimu snad... ;-)

  Peknou noc,

				Petr "Pasky" Baudis


From rainbof at gmail.com  Sat Apr  9 10:35:15 2011
From: rainbof at gmail.com (rainbof at gmail.com)
Date: Sat, 09 Apr 2011 08:35:15 +0000
Subject: [Brmlab] Brm-med
In-Reply-To: <20110409003258.GK3258@machine.or.cz>
Message-ID: <00151747b3d4c1af9204a07838ae@google.com>

ja urcite jednu nebo dve (nebo tri) beru. :) kdy to privezes ?

Dne u?ivatel Petr Baudis <pasky at ucw.cz> napsal:
> Ahoj!



> Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice

> lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez

> konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste

> chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem

> brmhive, ale pristi zimu snad... ;-)



> Peknou noc,



> Petr "Pasky" Baudis

> _______________________________________________

> Brmlab mailing list

> Brmlab at brmlab.cz

> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110409/eb7e3f0a/attachment.html>

From blackhead at blackhead.cz  Sat Apr  9 12:17:40 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sat, 9 Apr 2011 12:17:40 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <20110409003258.GK3258@machine.or.cz>
Message-ID: <BNEBJCHIKOICJLAPBAPHGENBDLAA.blackhead@blackhead.cz>

Ahoj!

Skvela nabidka. Prosim, rezervuj mi pet (5!) litru, dej vedet, kdy to bude k
vyzvednuti, predpokladam v Brm, nebo pokud chces, mohu si to vyzvednout i u
tebe v Letnanech...
Financni zdroje jsou alokovany...

Diky!

BH


-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
Petr Baudis
Sent: Saturday, April 09, 2011 2:33 AM
To: brmlab at brmlab.cz
Subject: [Brmlab] Brm-med


  Ahoj!

  Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice
lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez
konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste
chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem
brmhive, ale pristi zimu snad... ;-)

  Peknou noc,

				Petr "Pasky" Baudis
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From jenda at hrach.eu  Sat Apr  9 12:24:46 2011
From: jenda at hrach.eu (Jan Hrach)
Date: Sat, 09 Apr 2011 12:24:46 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <BNEBJCHIKOICJLAPBAPHGENBDLAA.blackhead@blackhead.cz>
References: <BNEBJCHIKOICJLAPBAPHGENBDLAA.blackhead@blackhead.cz>
Message-ID: <4DA033EE.8020501@hrach.eu>

Ahoj,

5! je 120 :)

pasky: Mohl bys mi tak? rezervovat litr? D?k.

Jenda

On 9.4.2011 12:17, George Blackhead wrote:
> Ahoj!
> 
> Skvela nabidka. Prosim, rezervuj mi pet (5!) litru, dej vedet, kdy to bude k
> vyzvednuti, predpokladam v Brm, nebo pokud chces, mohu si to vyzvednout i u
> tebe v Letnanech...
> Financni zdroje jsou alokovany...
> 
> Diky!
> 
> BH
> 
> 
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
> Petr Baudis
> Sent: Saturday, April 09, 2011 2:33 AM
> To: brmlab at brmlab.cz
> Subject: [Brmlab] Brm-med
> 
> 
>   Ahoj!
> 
>   Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice
> lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez
> konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste
> chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem
> brmhive, ale pristi zimu snad... ;-)
> 
>   Peknou noc,
> 
> 				Petr "Pasky" Baudis
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110409/4719567f/attachment.pgp>

From blackhead at blackhead.cz  Sat Apr  9 12:33:07 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Sat, 9 Apr 2011 12:33:07 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <4DA033EE.8020501@hrach.eu>
Message-ID: <BNEBJCHIKOICJLAPBAPHOENBDLAA.blackhead@blackhead.cz>

Neni to jen tak nahodou "!5"??? ;-)

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On
Behalf Of Jan Hrach
Sent: Saturday, April 09, 2011 12:25 PM
To: Brmlab: Hackerspace Prague (main discussion)
Subject: Re: [Brmlab] Brm-med


Ahoj,

5! je 120 :)

pasky: Mohl bys mi tak? rezervovat litr? D?k.

Jenda

On 9.4.2011 12:17, George Blackhead wrote:
> Ahoj!
> 
> Skvela nabidka. Prosim, rezervuj mi pet (5!) litru, dej vedet, kdy to bude k
> vyzvednuti, predpokladam v Brm, nebo pokud chces, mohu si to vyzvednout i u
> tebe v Letnanech...
> Financni zdroje jsou alokovany...
> 
> Diky!
> 
> BH
> 
> 
> -----Original Message-----
> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
> Petr Baudis
> Sent: Saturday, April 09, 2011 2:33 AM
> To: brmlab at brmlab.cz
> Subject: [Brmlab] Brm-med
> 
> 
>   Ahoj!
> 
>   Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice
> lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez
> konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste
> chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem
> brmhive, ale pristi zimu snad... ;-)
> 
>   Peknou noc,
> 
> 				Petr "Pasky" Baudis
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536




From czestmyr at gmail.com  Sat Apr  9 12:37:20 2011
From: czestmyr at gmail.com (Cestmir Houska)
Date: Sat, 9 Apr 2011 12:37:20 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <20110409003258.GK3258@machine.or.cz>
References: <20110409003258.GK3258@machine.or.cz>
Message-ID: <BANLkTikOKsu1+TLAF0aNmNRFWq2MhDp+Tw@mail.gmail.com>

Ahoj,

taky bych mel zajem. Pokud se tam najdou 2 litry pro me, budu moc rad. Diky.

Cestmir

2011/4/9 Petr Baudis <pasky at ucw.cz>

>  Ahoj!
>
>  Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice
> lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez
> konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste
> chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem
> brmhive, ale pristi zimu snad... ;-)
>
>  Peknou noc,
>
>                                Petr "Pasky" Baudis
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110409/3bae6f7d/attachment.html>

From stick at gk2.sk  Sat Apr  9 12:42:03 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Sat, 09 Apr 2011 12:42:03 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <BNEBJCHIKOICJLAPBAPHOENBDLAA.blackhead@blackhead.cz>
References: <BNEBJCHIKOICJLAPBAPHOENBDLAA.blackhead@blackhead.cz>
Message-ID: <4DA037FB.5000502@gk2.sk>

On 09/04/11 12:33, George Blackhead wrote:
> Neni to jen tak nahodou "!5"??? ;-)

Ne :-)

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From wilder at trip.sk  Sat Apr  9 18:41:45 2011
From: wilder at trip.sk (Pavol Luptak)
Date: Sat, 9 Apr 2011 18:41:45 +0200
Subject: [Brmlab] Open Data Challenge
In-Reply-To: <4D9CDE5D.8090404@gmail.com>
References: <4D9CDB0B.1010309@gk2.sk>
 <4D9CDE5D.8090404@gmail.com>
Message-ID: <20110409164145.GE12961@core.nethemba.com>

Ahojte,
je to sice komercny tool (ale existuje aj komunitna verzia), ale fakt namakany
na podobne korelacie a datamining, ktory odporucam - Maltego:

http://www.paterva.com/web5/

Pavol

On Wed, Apr 06, 2011 at 11:42:53PM +0200, Ondrej Mikle wrote:
> On 04/06/11 23:28, Pavol Rusnak wrote:
> > Dostal sa ku mne dneska tento odkaz - http://opendatachallenge.org/
> > 
> > Myslienka je jednoducha: vymysliet napad, pripadne vytvorit aplikaciu ci
> > vizualizaciu, ktore bude nejakym zaujimavym sposobom pracovat s
> > otvorenymi datasetmi (napr. z PublicData.eu). Ktorych toto zaujalo,
> > precitajte si viac info na stranke. Deadline je 5. juna, tj. presne o 59
> > dni.
> 
> Heh, akurat sa hrabem v tych eDemocracy projektoch, ze "co to umi" - viz napr.
> http://vorsr.sk (v betaverzii je tam aj vizualizacia vztahov CR obchodneho
> registra - http://cz.vorsr.sk/index.html), dalej znamy http://foaf.sk,
> momentalne sa snazim rozlustit "rozumnost" dimenzionalnej reduckie v metodike
> zIndexu (http://wiki.zindex.cz/doku.php?id=vypocet_zindexu).
> 
> Viz tiez http://znasichdani.sk - vizualizacia objemov SK verejnych zakazok
> (napr.
> http://znasichdani.sk/v?n=Ing.+Juraj+%C5%A0irok%C3%BD&c=V%C3%81HOSTAV+-+SK%2C+a.s.&p=ID%3D8574%26SID%3D5%26P%3D1
> ), tito tam niekde uvadzali aj link na zdrojaky, ale teraz to ani za boha neviem
> najst.
> 
> BTW to posledne je zalozene na http://datanest.sk - tam je spusta datasetov,
> napr. danovi dlznici (http://datanest.fair-play.sk/datasets/33).
> 
> Tj. neni treba ist ani moc daleko po projekty, do ktorych sa da zapojit alebo po
> datasety.
> 
> OM
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

-- 
_______________________________________________________________
[wilder at trip.sk] [http://trip.sk/wilder/] [talker: ttt.sk 5678]
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110409/dfbd17e7/attachment.pgp>

From andrej.boleslavsky at ciant.cz  Sat Apr  9 22:37:31 2011
From: andrej.boleslavsky at ciant.cz (Andrej Boleslavsky | CIANT)
Date: Sat, 9 Apr 2011 22:37:31 +0200
Subject: [Brmlab] levelHead
Message-ID: <BANLkTinYB6LtDsndw+emaYeWZQ+itgONgQ@mail.gmail.com>

Ahoj kamr?di,

pros?m v?s, nutn? bychom pot?ebovali pomoc s instalac? jedn? hry pro Linux -
levelHead.
Nenajde se u v?s n?kdo kdo m? ?as&chu?&skill? Pot?ebujeme to m?t do pond?l?
ve?era :(
http://selectparks.net/~julian/levelhead/install
Na odm?ne se domluv?me :)

Andrej Boleslavsky

// artist and researcher
// +420 608 475 594
// CIANT | International Centre for Art and New Technologies
// http://www.ciant.cz
// http://festival-enter.cz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110409/994e1eb7/attachment.html>

From niekt0 at hysteria.sk  Sun Apr 10 11:59:04 2011
From: niekt0 at hysteria.sk (niekt0)
Date: Sun, 10 Apr 2011 11:59:04 +0200
Subject: [Brmlab] levelHead
In-Reply-To: <BANLkTinYB6LtDsndw+emaYeWZQ+itgONgQ@mail.gmail.com>
References: <BANLkTinYB6LtDsndw+emaYeWZQ+itgONgQ@mail.gmail.com>
Message-ID: <BANLkTimKeckgX9T-s6m=0hOT4R8voQYb6Q@mail.gmail.com>

Ahoj,

Dnes (10/04/2011) mame v brmlabe o 13:00 kurz prvej pomoci,
a minimalne par z nas by tam malo pobehovat asi az do vecera.

Ak si schopny tu hru doniest, radi ti s tym pomozeme.
Ak by bolo nutne prist do ciantu, asi by sme pomohli tiez, al musime
najprv najst dobrovolnika co tam vyrazi.

n.

On 4/9/11, Andrej Boleslavsky | CIANT <andrej.boleslavsky at ciant.cz> wrote:
> Ahoj kamr?di,
>
> pros?m v?s, nutn? bychom pot?ebovali pomoc s instalac? jedn? hry pro Linux -
> levelHead.
> Nenajde se u v?s n?kdo kdo m? ?as&chu?&skill? Pot?ebujeme to m?t do pond?l?
> ve?era :(
> http://selectparks.net/~julian/levelhead/install
> Na odm?ne se domluv?me :)
>
> Andrej Boleslavsky
>
> // artist and researcher
> // +420 608 475 594
> // CIANT | International Centre for Art and New Technologies
> // http://www.ciant.cz
> // http://festival-enter.cz
>


From zember at gmail.com  Sun Apr 10 13:39:55 2011
From: zember at gmail.com (=?UTF-8?Q?Martin_=C5=BDember?=)
Date: Sun, 10 Apr 2011 13:39:55 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <4DA033EE.8020501@hrach.eu>
References: <BNEBJCHIKOICJLAPBAPHGENBDLAA.blackhead@blackhead.cz>
	<4DA033EE.8020501@hrach.eu>
Message-ID: <BANLkTi=e1bxbZajewbj=nA8fzQvunbyVbw@mail.gmail.com>

Ja prossim pet (bez faktorialu ;-)

Martin

2011/4/9 Jan Hrach <jenda at hrach.eu>:
> Ahoj,
>
> 5! je 120 :)
>
> pasky: Mohl bys mi tak? rezervovat litr? D?k.
>
> Jenda
>
> On 9.4.2011 12:17, George Blackhead wrote:
>> Ahoj!
>>
>> Skvela nabidka. Prosim, rezervuj mi pet (5!) litru, dej vedet, kdy to bude k
>> vyzvednuti, predpokladam v Brm, nebo pokud chces, mohu si to vyzvednout i u
>> tebe v Letnanech...
>> Financni zdroje jsou alokovany...
>>
>> Diky!
>>
>> BH
>>
>>
>> -----Original Message-----
>> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
>> Petr Baudis
>> Sent: Saturday, April 09, 2011 2:33 AM
>> To: brmlab at brmlab.cz
>> Subject: [Brmlab] Brm-med
>>
>>
>> ? Ahoj!
>>
>> ? Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice
>> lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez
>> konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste
>> chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem
>> brmhive, ale pristi zimu snad... ;-)
>>
>> ? Peknou noc,
>>
>> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Petr "Pasky" Baudis
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
>
> --
> Jan Hrach, http://jenda.hrach.eu/
> GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>


From rainbof at gmail.com  Sun Apr 10 14:28:09 2011
From: rainbof at gmail.com (Ondrej Beranek)
Date: Sun, 10 Apr 2011 14:28:09 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <BANLkTi=e1bxbZajewbj=nA8fzQvunbyVbw@mail.gmail.com>
References: <BNEBJCHIKOICJLAPBAPHGENBDLAA.blackhead@blackhead.cz>
	<4DA033EE.8020501@hrach.eu>
	<BANLkTi=e1bxbZajewbj=nA8fzQvunbyVbw@mail.gmail.com>
Message-ID: <BANLkTin7Egqs=Cb4bxZr__hXRfEbxVeszA@mail.gmail.com>

tak?e kdy ?

Dne 10. dubna 2011 13:39 Martin ?ember <zember at gmail.com> napsal(a):

> Ja prossim pet (bez faktorialu ;-)
>
> Martin
>
> 2011/4/9 Jan Hrach <jenda at hrach.eu>:
> > Ahoj,
> >
> > 5! je 120 :)
> >
> > pasky: Mohl bys mi tak? rezervovat litr? D?k.
> >
> > Jenda
> >
> > On 9.4.2011 12:17, George Blackhead wrote:
> >> Ahoj!
> >>
> >> Skvela nabidka. Prosim, rezervuj mi pet (5!) litru, dej vedet, kdy to
> bude k
> >> vyzvednuti, predpokladam v Brm, nebo pokud chces, mohu si to vyzvednout
> i u
> >> tebe v Letnanech...
> >> Financni zdroje jsou alokovany...
> >>
> >> Diky!
> >>
> >> BH
> >>
> >>
> >> -----Original Message-----
> >> From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On
> Behalf Of
> >> Petr Baudis
> >> Sent: Saturday, April 09, 2011 2:33 AM
> >> To: brmlab at brmlab.cz
> >> Subject: [Brmlab] Brm-med
> >>
> >>
> >>   Ahoj!
> >>
> >>   Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice
> >> lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez
> >> konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste
> >> chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem
> >> brmhive, ale pristi zimu snad... ;-)
> >>
> >>   Peknou noc,
> >>
> >>                               Petr "Pasky" Baudis
> >> _______________________________________________
> >> Brmlab mailing list
> >> Brmlab at brmlab.cz
> >> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >>
> >> _______________________________________________
> >> Brmlab mailing list
> >> Brmlab at brmlab.cz
> >> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >>
> >
> > --
> > Jan Hrach, http://jenda.hrach.eu/
> > GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536
> >
> >
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
> >
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110410/76086540/attachment.html>

From pasky at ucw.cz  Sun Apr 10 14:37:45 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Sun, 10 Apr 2011 14:37:45 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <BANLkTin7Egqs=Cb4bxZr__hXRfEbxVeszA@mail.gmail.com>
References: <BNEBJCHIKOICJLAPBAPHGENBDLAA.blackhead@blackhead.cz>
	<4DA033EE.8020501@hrach.eu>
	<BANLkTi=e1bxbZajewbj=nA8fzQvunbyVbw@mail.gmail.com>
	<BANLkTin7Egqs=Cb4bxZr__hXRfEbxVeszA@mail.gmail.com>
Message-ID: <20110410123745.GW3258@machine.or.cz>

On Sun, Apr 10, 2011 at 02:28:09PM +0200, Ondrej Beranek wrote:
> tak?e kdy ?

Pocitam behem pristiho nebo (pravdepodobneji) popristiho tydne.

				Petr "Pasky" Baudis


From stick at gk2.sk  Sun Apr 10 20:46:10 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Sun, 10 Apr 2011 20:46:10 +0200
Subject: [Brmlab] levelHead
In-Reply-To: <BANLkTimKeckgX9T-s6m=0hOT4R8voQYb6Q@mail.gmail.com>
References: <BANLkTinYB6LtDsndw+emaYeWZQ+itgONgQ@mail.gmail.com>
	<BANLkTimKeckgX9T-s6m=0hOT4R8voQYb6Q@mail.gmail.com>
Message-ID: <4DA1FAF2.7040106@gk2.sk>

On 10/04/11 11:59, niekt0 wrote:
> Ak si schopny tu hru doniest, radi ti s tym pomozeme.
> Ak by bolo nutne prist do ciantu, asi by sme pomohli tiez, al musime
> najprv najst dobrovolnika co tam vyrazi.

Volal som prave s Andrejom a pojdem sa na to zajtra rano pozriet. Ak by
sa chcel niekto este pridat, tak si mozme dat rande o deviatej na
Dejvickej. :-)

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From pasky at ucw.cz  Mon Apr 11 00:31:05 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 11 Apr 2011 00:31:05 +0200
Subject: [Brmlab] [jirka.sejnoha@gmail.com: Re: Seminar filosofie
	informatiky]
Message-ID: <20110410223105.GB3258@machine.or.cz>

----- Forwarded message from Jirka <jirka.sejnoha at gmail.com> -----

Ahoj,

n?sleduj?c? semin?? "Filosofick?ch probl?mu informatiky", p?edn???
doc. PhDr. Zden?k Kratochv?l, Ph.D. (P?F UK, FF UK), na t?ma:


         "Matematika: jazyk pravdy nebo sp?? u?ite?n? n?stroj
pozn?v?n??"


Abstrakt:

1. Matematizace renesan?n? fyziky:
  Kopern?k?v obrat, mechanomorfn? metafora.
  Indukce (F. Bacon) a matematizace (G. Galilei).
  P?echod od popisu math?matik?s k popisu fysik?s (viz Kepler?v odvrat
od Kosmograick?ho myst?ria).

2. Nov? v?da, ?dajn? bez metafyzick?ch p?edpoklad?:
  Pozitivismus, Popper, Feyerabend, pragmatismus a instrumentalismus.
  Matematika jako instrument p??rodn?ch v?d: role statistiky a
matematick?ch model?.
  Kybernetick? metafora, hierarchick? a ne-hierarchick? s?t?.
  Lesk a b?da metodologie.

Podrobn?ji viz:
www.fysis.cz, zvl??t? str?nka kurzu Filosofie a metodologie v?dy:
www.fysis.cz/PrF/10/Metod.html



Semin?? se kon? ve st?edu 13. 4. 2011 od 17.20 v posluch?rn? S8 na
Malostransk?m n?m?st?, budova MFF UK.
Podle me velmi zajimavy clovek, co me se tyce, na fyzice mel pred lety
jednu z nejlepsich prednasek, co jsem kdy slysel - takze doufam, ze si
udrzi uroven.

                 Mejte se Jirka.

----- End forwarded message -----

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From pavol.luptak at nethemba.com  Mon Apr 11 16:10:32 2011
From: pavol.luptak at nethemba.com (Pavol Luptak)
Date: Mon, 11 Apr 2011 16:10:32 +0200
Subject: [Brmlab] =?utf-8?b?NSBkw7R2b2RvdiBwcmXEjW8gbmF2xaF0w612acWlIENv?=
	=?utf-8?q?nfidence_2011_v_Krakove?=
Message-ID: <20110411141032.GA14890@core.nethemba.com>

FYI - ak idete tento rok na Confidence do Krakova, tak sa mi ozvite - vzornym
clenom hackerspaceov viem vybavit 30% zlavu:

https://www.nethemba.com/sk/blog/-/blogs/5-dovodov-preco-navstivit-confidence-2011-v-krakove

Ak ste ?lenom Bratislavsk?ho hackerspaceu Progressbar alebo Pra?sk?ho Brmlab 
s uhraden?m ?lensk?m minim?lne za posledn? 2 mesiace, tak m?te n?rok si 
uplatni? 30% z?avu (?o je moment?lne a? 60 ?, v pr?pade ?tudentsk?ho vstupu 
45 ?).
-- 
______________________________________________________________________________
[Pavol Luptak, Nethemba s.r.o.] [http://www.nethemba.com] [tel: +421905400542]
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3609 bytes
Desc: not available
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110411/9d202865/attachment.bin>

From johny at 2600.sk  Mon Apr 11 16:51:08 2011
From: johny at 2600.sk (JoHnY)
Date: Mon, 11 Apr 2011 16:51:08 +0200
Subject: [Brmlab] diktafon
Message-ID: <20110411165108.2b021011.johny@2600.sk>

Nemate nahodou niekto diktafon na tie klasicke diktafonove mikrokazety, preferably s nejakym line-outom aby to nejako slo prehrat do pocitaca?

 
	bye, JoHnY.



From jenda at hrach.eu  Mon Apr 11 18:15:11 2011
From: jenda at hrach.eu (Jan Hrach)
Date: Mon, 11 Apr 2011 18:15:11 +0200
Subject: [Brmlab] diktafon
In-Reply-To: <20110411165108.2b021011.johny@2600.sk>
References: <20110411165108.2b021011.johny@2600.sk>
Message-ID: <4DA3290F.1060400@hrach.eu>

M?m, n?kde. Zkus?m naj?t. Kdy? nenap??u, nena?el jsem?

On 11.4.2011 16:51, JoHnY wrote:
> Nemate nahodou niekto diktafon na tie klasicke diktafonove mikrokazety, preferably s nejakym line-outom aby to nejako slo prehrat do pocitaca?
> 
>  
> 	bye, JoHnY.
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110411/3428677c/attachment.pgp>

From kxt at jenikovo.com  Mon Apr 11 19:56:16 2011
From: kxt at jenikovo.com (Jan Svec)
Date: Mon, 11 Apr 2011 19:56:16 +0200
Subject: [Brmlab] Brm-med
In-Reply-To: <20110409003258.GK3258@machine.or.cz>
References: <20110409003258.GK3258@machine.or.cz>
Message-ID: <4DA340C0.5080704@jenikovo.com>

Dne 9.4.2011 2:32, Petr Baudis napsal(a):
>    Ahoj!
>
>    Tatovi prebyva nejaky med a napadlo mne, ze v brmlabu by mohlo vice
> lidi ocenit sklenici/e pastovaneho medu (primo od vcelare, bez
> konzervantu a doslazovani) za rozumnou cenu (100kc/litr). Tak kdo byste
> chtel, dejte mi vedet. Producentky sice letos jeste nespaly pod dozorem
> brmhive, ale pristi zimu snad... ;-)
>
>    Peknou noc,
>
> 				Petr "Pasky" Baudis
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
Pokud se litrik najde, vzal bych si, diky!

Kermit


From zember at gmail.com  Mon Apr 11 22:22:52 2011
From: zember at gmail.com (=?UTF-8?Q?Martin_=C5=BDember?=)
Date: Mon, 11 Apr 2011 22:22:52 +0200
Subject: [Brmlab] diktafon
In-Reply-To: <20110411165108.2b021011.johny@2600.sk>
References: <20110411165108.2b021011.johny@2600.sk>
Message-ID: <BANLkTimJ4N0YTg0BFnqEHOyOQjsEqHUQmA@mail.gmail.com>

M?m, a d? sa z neho k?blom jack-jack nahra? obsah do po??ta?a. (Je na
dve AA baterky.)

Martin

2011/4/11 JoHnY <johny at 2600.sk>:
> Nemate nahodou niekto diktafon na tie klasicke diktafonove mikrokazety, preferably s nejakym line-outom aby to nejako slo prehrat do pocitaca?
>
>
> ? ? ? ?bye, JoHnY.
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>


From vatoz at seznam.cz  Tue Apr 12 19:08:24 2011
From: vatoz at seznam.cz (=?us-ascii?Q?Vaclav=20Cerny?=)
Date: Tue, 12 Apr 2011 19:08:24 +0200 (CEST)
Subject: [Brmlab] Panorama
Message-ID: <24787.9649.20107-7595-1635839283-1302628104@seznam.cz>

Ahoj,
dot?hl jsem do prezentovateln? formy panorama z Brmlabu  focen? n?kdy p?edminule ?i tak.
M??ete se na n?j pod?vat na 
http://panora.ma/news/2011/brm-meetup.html 
    -budete pot?ebovat flash.

Stavuju se dnes v Brmlabu, p?iv?t?m kritiku, n?vrhy na vylep?en? apod, p??padn? ho n?kdy m??em nakop?rovat na brmlab.cz

Vatoz


From algoldor at yahoo.com  Wed Apr 13 07:49:52 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Tue, 12 Apr 2011 22:49:52 -0700 (PDT)
Subject: [Brmlab] Panorama
In-Reply-To: <24787.9649.20107-7595-1635839283-1302628104@seznam.cz>
References: <24787.9649.20107-7595-1635839283-1302628104@seznam.cz>
Message-ID: <915400.47374.qm@web111505.mail.gq1.yahoo.com>

Pekne!



----- Original Message ----
From: Vaclav Cerny <vatoz at seznam.cz>
To: brmlab at brmlab.cz
Sent: Tue, April 12, 2011 6:08:24 PM
Subject: [Brmlab] Panorama

Ahoj,
dot?hl jsem do prezentovateln? formy panorama z Brmlabu  focen? n?kdy p?edminule 
?i tak.
M??ete se na n?j pod?vat na 
http://panora.ma/news/2011/brm-meetup.html 
    -budete pot?ebovat flash.

Stavuju se dnes v Brmlabu, p?iv?t?m kritiku, n?vrhy na vylep?en? apod, p??padn? 
ho n?kdy m??em nakop?rovat na brmlab.cz

Vatoz
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From ruza at ruza.eu  Wed Apr 13 14:58:48 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Wed, 13 Apr 2011 14:58:48 +0200
Subject: [Brmlab] Panorama
In-Reply-To: <24787.9649.20107-7595-1635839283-1302628104@seznam.cz>
References: <24787.9649.20107-7595-1635839283-1302628104@seznam.cz>
Message-ID: <4DA59E08.5010207@ruza.eu>

Zadne pripominky nemam, je to uplne super. Jen, jak jsem uz navrhoval,
jestli by nekdo mohl jeste udelat video "jak se jde budovou do brmlabu",
tj natocit a zrychlene pustit cestu od vratnice az ke dverim. Ted sice
mame na strankach textovy popis a mapku, ale to si clovek ktery v
brmlabu nikdy nebyl stejne dobre nezapamatuje, narozdil od videa kde tu
vizualni podobu pruchodu chodbou vstreba temer kdekdo.

ruza

On 04/12/2011 07:08 PM, Vaclav Cerny wrote:
> Ahoj,
> dot?hl jsem do prezentovateln? formy panorama z Brmlabu  focen? n?kdy p?edminule ?i tak.
> M??ete se na n?j pod?vat na 
> http://panora.ma/news/2011/brm-meetup.html 
>     -budete pot?ebovat flash.
> 
> Stavuju se dnes v Brmlabu, p?iv?t?m kritiku, n?vrhy na vylep?en? apod, p??padn? ho n?kdy m??em nakop?rovat na brmlab.cz


From stick at gk2.sk  Wed Apr 13 15:29:54 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 13 Apr 2011 15:29:54 +0200
Subject: [Brmlab] Farnell nakup
Message-ID: <4DA5A552.9050003@gk2.sk>

Ahoj!

Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak mi
do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From vitezslav.zak at mindstore.cz  Wed Apr 13 20:16:06 2011
From: vitezslav.zak at mindstore.cz (Vitezslav.Zak)
Date: Wed, 13 Apr 2011 20:16:06 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <4DA5A552.9050003@gk2.sk>
References: <4DA5A552.9050003@gk2.sk>
Message-ID: <4DA5E866.3070602@mindstore.cz>

Zdar,

nejdriv se musim predstavit - jmenuji se Vitek Zak, nick vtec, v Brmlabu 
jsem se jeste neobjevil, ale tento (nejpozdeji pristi) tyden to napravim.

Pokud je to mozne, chtel bych stm32discovery.

Penize muzu poslat hned prevodem, prip. donest do brmlabu zitra nebo v 
po/ut.

Diky,

Vitek.

http://cz.farnell.com/stmicroelectronics/stm32vldiscovery/board-eval-stm32vl-discovery/dp/1824325?crosssellid=1824325&crosssell=true&in_merch=true&

On 13.4.2011 15:29, Pavol Rusnak wrote:
> Ahoj!
>
> Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak mi
> do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
> zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)
>



From stick at gk2.sk  Wed Apr 13 20:30:18 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 13 Apr 2011 20:30:18 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <4DA5E866.3070602@mindstore.cz>
References: <4DA5A552.9050003@gk2.sk> <4DA5E866.3070602@mindstore.cz>
Message-ID: <4DA5EBBA.3090606@gk2.sk>

On 13/04/11 20:16, Vitezslav.Zak wrote:
> Pokud je to mozne, chtel bych stm32discovery.

Iba jeden kus?

> Penize muzu poslat hned prevodem, prip. donest do brmlabu zitra nebo v
> po/ut.

Staci prijit v uteri na meetup. Ja tam zvyknem chodit niekedy pred
osmou. Neviem ci to bude ready uz na nasledujuci meetup, ale snad jo.

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From tsuchan at seznam.cz  Wed Apr 13 20:46:43 2011
From: tsuchan at seznam.cz (Tomas Suchan)
Date: Wed, 13 Apr 2011 20:46:43 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <4DA5A552.9050003@gk2.sk>
References: <4DA5A552.9050003@gk2.sk>
Message-ID: <1302720403.2158.69.camel@DeepAttack>

Ahoj,

prihod mi tam prosim:

1x 4745061 

Dekuji....

TomSuch

Pavol Rusnak p??e v St 13. 04. 2011 v 15:29 +0200:
> Ahoj!
> 
> Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak mi
> do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
> zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)
> 




From rainbof at gmail.com  Wed Apr 13 21:05:14 2011
From: rainbof at gmail.com (rainbof at gmail.com)
Date: Wed, 13 Apr 2011 19:05:14 +0000
Subject: [Brmlab] Farnell nakup
In-Reply-To: <1302720403.2158.69.camel@DeepAttack>
Message-ID: <001636c5ba1323951a04a0d17d69@google.com>

ahoj prihod mi tam 2x 1715487 + 2x ten krystal co je na arduinu nemuzu to  
ted nikde najit.

O.


Dne u?ivatel Tomas Suchan <tsuchan at seznam.cz> napsal:
> Ahoj,



> prihod mi tam prosim:



> 1x 4745061



> Dekuji....



> TomSuch



> Pavol Rusnak p??e v St 13. 04. 2011 v 15:29 +0200:

> > Ahoj!

> >

> > Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak mi

> > do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme

> > zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)

> >





> _______________________________________________

> Brmlab mailing list

> Brmlab at brmlab.cz

> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110413/d445f7a7/attachment.html>

From sargonout at gmail.com  Wed Apr 13 21:43:02 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Wed, 13 Apr 2011 21:43:02 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <001636c5ba1323951a04a0d17d69@google.com>
References: <1302720403.2158.69.camel@DeepAttack>
	<001636c5ba1323951a04a0d17d69@google.com>
Message-ID: <BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>

Ahoj Vitec

STM32 Discovery mam v Brmlabe este nerozbalene :)
tiez som sa ulakomil na jeho cenu ale ma svoje muchy ...

pokial chces ja ti ho pozicam a mozes si ho skusit
pokial sa rozhodnes ze to je prave to co chces tak urcite sa bude este z
farnellu objednavat
a mozes si ho objednat neskor ... zatial budes mat samozrejme k dispozicii
ten moj

pozdrav
Sargon


2011/4/13 <rainbof at gmail.com>

> ahoj prihod mi tam 2x 1715487 + 2x ten krystal co je na arduinu nemuzu to
> ted nikde najit.
>
> O.
>
>
> Dne u?ivatel Tomas Suchan <tsuchan at seznam.cz> napsal:
>
> > Ahoj,
> >
> >
> >
> > prihod mi tam prosim:
> >
> >
> >
> > 1x 4745061
> >
> >
> >
> > Dekuji....
> >
> >
> >
> > TomSuch
> >
> >
> >
> > Pavol Rusnak p??e v St 13. 04. 2011 v 15:29 +0200:
> >
> > > Ahoj!
> >
> > >
> >
> > > Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak mi
> >
> > > do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
> >
> > > zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)
> >
> > >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > Brmlab mailing list
> >
> > Brmlab at brmlab.cz
> >
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110413/ab924af3/attachment.html>

From blackhead at blackhead.cz  Wed Apr 13 22:04:57 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Wed, 13 Apr 2011 22:04:57 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <4DA5A552.9050003@gk2.sk>
Message-ID: <BNEBJCHIKOICJLAPBAPHCENIDLAA.blackhead@blackhead.cz>

Ahoj

Pokud neni pozde, tak prosim prihod:
3x 1852005 (3V 1.5A)
3x 1840843 (3V 1.5A)
6x 1834928 (10K serial 64steps)
2x 1834926 (50K serial 64steps)
4x 1863244 (microRGB LED)

Bude to za par set...

Zaplatim hotove, nebo poslu z uctu na ucet... podle potreby... ;-)

DIKY!

BH

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
Pavol Rusnak
Sent: Wednesday, April 13, 2011 3:30 PM
To: Prague hackerspace
Subject: [Brmlab] Farnell nakup


Ahoj!

Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak mi
do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)

--
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From vitezslav.zak at mindstore.cz  Wed Apr 13 23:03:51 2011
From: vitezslav.zak at mindstore.cz (Vitezslav.Zak)
Date: Wed, 13 Apr 2011 23:03:51 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
References: <1302720403.2158.69.camel@DeepAttack>	<001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
Message-ID: <4DA60FB7.3050206@mindstore.cz>

Tome,
diky za nabidku. Nazory na ten board probereme. Co jsem se docetl, tak 
jsou tam komplikace s vyvojovym prostredim (licence, omezena 
funkcionalita, atd.) ale parametry vic nez slusne. Cena super. Tak kde 
je zakopany pes?

@Pavol,
pokud to nekomplikuje situaci, tak moji objednavku na stm32 discovery zrus.
Pokud uz je pozde, tak nevadi, nekomu se treba bude hodit.

jeste jednou diky panove.

V.


On 13.4.2011 21:43, Tomislav Arnaudov wrote:
> Ahoj Vitec
>
> STM32 Discovery mam v Brmlabe este nerozbalene :)
> tiez som sa ulakomil na jeho cenu ale ma svoje muchy ...
>
> pokial chces ja ti ho pozicam a mozes si ho skusit
> pokial sa rozhodnes ze to je prave to co chces tak urcite sa bude este 
> z farnellu objednavat
> a mozes si ho objednat neskor ... zatial budes mat samozrejme k 
> dispozicii ten moj
>
> pozdrav
> Sargon
>
>
> 2011/4/13 <rainbof at gmail.com <mailto:rainbof at gmail.com>>
>
>     ahoj prihod mi tam 2x 1715487 + 2x ten krystal co je na arduinu
>     nemuzu to ted nikde najit.
>
>     O.
>
>
>     Dne u?ivatel Tomas Suchan <tsuchan at seznam.cz
>     <mailto:tsuchan at seznam.cz>> napsal:
>
>     > Ahoj,
>     >
>     >
>     >
>     > prihod mi tam prosim:
>     >
>     >
>     >
>     > 1x 4745061
>     >
>     >
>     >
>     > Dekuji....
>     >
>     >
>     >
>     > TomSuch
>     >
>     >
>     >
>     > Pavol Rusnak p??e v St 13. 04. 2011 v 15:29 +0200:
>     >
>     > > Ahoj!
>     >
>     > >
>     >
>     > > Robime mega nakup z Farnellu, ak chcete nieco prihodit do
>     kosika tak mi
>     >
>     > > do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
>     >
>     > > zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)
>     >
>     > >
>     >
>     >
>     >
>     >
>     >
>     > _______________________________________________
>     >
>     > Brmlab mailing list
>     >
>     > Brmlab at brmlab.cz <mailto:Brmlab at brmlab.cz>
>     >
>     > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>     >
>
>     _______________________________________________
>     Brmlab mailing list
>     Brmlab at brmlab.cz <mailto:Brmlab at brmlab.cz>
>     http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110413/67739c0b/attachment.html>

From sargonout at gmail.com  Wed Apr 13 23:24:51 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Wed, 13 Apr 2011 23:24:51 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <4DA60FB7.3050206@mindstore.cz>
References: <1302720403.2158.69.camel@DeepAttack>
	<001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
Message-ID: <BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>

u mna to stroskotalo na tom ze doma pouzivam prevazne linux a ten debuger ma
ovladace len pre widle
nasiel som navod ako do discovery "nasipat" binarku cez seriovy prevodnik
ale
u 32bit procaku by som si netrufol vyvijat nieco bez moznosti debugu :-/

pokial dojdes v utorok na meetup radi ti ukazeme lpcxpresso osadene chipom
lpc1343 ktory pod tucniakom beha.

pozdrav
Sargon

2011/4/13 Vitezslav.Zak <vitezslav.zak at mindstore.cz>

>  Tome,
> diky za nabidku. Nazory na ten board probereme. Co jsem se docetl, tak jsou
> tam komplikace s vyvojovym prostredim (licence, omezena funkcionalita, atd.)
> ale parametry vic nez slusne. Cena super. Tak kde je zakopany pes?
>
> @Pavol,
> pokud to nekomplikuje situaci, tak moji objednavku na stm32 discovery zrus.
> Pokud uz je pozde, tak nevadi, nekomu se treba bude hodit.
>
> jeste jednou diky panove.
>
> V.
>
>
>
> On 13.4.2011 21:43, Tomislav Arnaudov wrote:
>
> Ahoj Vitec
>
>  STM32 Discovery mam v Brmlabe este nerozbalene :)
> tiez som sa ulakomil na jeho cenu ale ma svoje muchy ...
>
>  pokial chces ja ti ho pozicam a mozes si ho skusit
> pokial sa rozhodnes ze to je prave to co chces tak urcite sa bude este z
> farnellu objednavat
> a mozes si ho objednat neskor ... zatial budes mat samozrejme k dispozicii
> ten moj
>
>  pozdrav
> Sargon
>
>
> 2011/4/13 <rainbof at gmail.com>
>
>> ahoj prihod mi tam 2x 1715487 + 2x ten krystal co je na arduinu nemuzu to
>> ted nikde najit.
>>
>> O.
>>
>>
>> Dne u?ivatel Tomas Suchan <tsuchan at seznam.cz> napsal:
>>
>> > Ahoj,
>> >
>> >
>> >
>> > prihod mi tam prosim:
>> >
>> >
>> >
>> > 1x 4745061
>> >
>> >
>> >
>> > Dekuji....
>> >
>> >
>> >
>> > TomSuch
>> >
>> >
>> >
>> > Pavol Rusnak p??e v St 13. 04. 2011 v 15:29 +0200:
>> >
>> > > Ahoj!
>> >
>> > >
>> >
>> > > Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak
>> mi
>> >
>> > > do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
>> >
>> > > zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)
>> >
>> > >
>> >
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> >
>> > Brmlab mailing list
>> >
>> > Brmlab at brmlab.cz
>> >
>> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>> >
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
>>
>
> _______________________________________________
> Brmlab mailing listBrmlab at brmlab.czhttp://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110413/1cc2e617/attachment.html>

From blackhead at blackhead.cz  Thu Apr 14 22:30:28 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Thu, 14 Apr 2011 22:30:28 +0200
Subject: [Brmlab] PC pro Brmlab, TV z Brmlabu
Message-ID: <BNEBJCHIKOICJLAPBAPHCENJDLAA.blackhead@blackhead.cz>

Ahoj

Dneska jsem konecne v muzeu spakoval zbyle PC pro Brmlab. Takze je tam 6 PC
a hromada dalsiho HW... Taky hromada CRT monitoru...

Chtel bych se s nekym z Vas domluvit, kdo mate auto, zda byste mi pomohli za
A) odvezt telku (a ty drobnosti u ni) z Brm do muzea a za B) pri spatecni
ceste vyzvedli vsechen ten HW a dovezli do Brm, pripadne v opacnem poradi.
;-)

Diky, dejte vedet.

Zitra uverejnim fotky a dalsi popis te "dalsi hromady".

Cau
BH



From johny at 2600.sk  Thu Apr 14 22:40:10 2011
From: johny at 2600.sk (JoHnY)
Date: Thu, 14 Apr 2011 22:40:10 +0200
Subject: [Brmlab] PC pro Brmlab, TV z Brmlabu
In-Reply-To: <BNEBJCHIKOICJLAPBAPHCENJDLAA.blackhead@blackhead.cz>
References: <BNEBJCHIKOICJLAPBAPHCENJDLAA.blackhead@blackhead.cz>
Message-ID: <20110414224010.f2d8a912.johny@2600.sk>

Ja by som mohol pred meetupom buduci tyzden ak by to vyhovovalo...

On Thu, 14 Apr 2011 22:30:28 +0200
"George Blackhead" <blackhead at blackhead.cz> wrote:

> Ahoj
> 
> Dneska jsem konecne v muzeu spakoval zbyle PC pro Brmlab. Takze je
> tam 6 PC a hromada dalsiho HW... Taky hromada CRT monitoru...
> 
> Chtel bych se s nekym z Vas domluvit, kdo mate auto, zda byste mi
> pomohli za A) odvezt telku (a ty drobnosti u ni) z Brm do muzea a
> za B) pri spatecni ceste vyzvedli vsechen ten HW a dovezli do Brm,
> pripadne v opacnem poradi. ;-)
> 
> Diky, dejte vedet.
> 
> Zitra uverejnim fotky a dalsi popis te "dalsi hromady".
> 
> Cau
> BH
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab


 
	bye, JoHnY.



From blackhead at blackhead.cz  Thu Apr 14 22:45:25 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Thu, 14 Apr 2011 22:45:25 +0200
Subject: [Brmlab] PC pro Brmlab, TV z Brmlabu
In-Reply-To: <20110414224010.f2d8a912.johny@2600.sk>
Message-ID: <BNEBJCHIKOICJLAPBAPHKENJDLAA.blackhead@blackhead.cz>

Myslim ze to by bylo super...

Jeste se domluvime.

Diky

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
JoHnY
Sent: Thursday, April 14, 2011 10:40 PM
To: brmlab at brmlab.cz
Subject: Re: [Brmlab] PC pro Brmlab, TV z Brmlabu


Ja by som mohol pred meetupom buduci tyzden ak by to vyhovovalo...

On Thu, 14 Apr 2011 22:30:28 +0200
"George Blackhead" <blackhead at blackhead.cz> wrote:

> Ahoj
>
> Dneska jsem konecne v muzeu spakoval zbyle PC pro Brmlab. Takze je
> tam 6 PC a hromada dalsiho HW... Taky hromada CRT monitoru...
>
> Chtel bych se s nekym z Vas domluvit, kdo mate auto, zda byste mi
> pomohli za A) odvezt telku (a ty drobnosti u ni) z Brm do muzea a
> za B) pri spatecni ceste vyzvedli vsechen ten HW a dovezli do Brm,
> pripadne v opacnem poradi. ;-)
>
> Diky, dejte vedet.
>
> Zitra uverejnim fotky a dalsi popis te "dalsi hromady".
>
> Cau
> BH
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



	bye, JoHnY.

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From niekt0 at hysteria.sk  Thu Apr 14 23:48:29 2011
From: niekt0 at hysteria.sk (niekt0)
Date: Thu, 14 Apr 2011 23:48:29 +0200
Subject: [Brmlab] hmmz
Message-ID: <BANLkTinrFyk4z1zcMEPPJ0o2c7W2QzGr1w@mail.gmail.com>

fyi: http://hashcat.net/forum/thread-366.html

n.


From klusacek at atrey.karlin.mff.cuni.cz  Fri Apr 15 00:43:01 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Fri, 15 Apr 2011 00:43:01 +0200
Subject: [Brmlab] ARM
In-Reply-To: <BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
References: <1302720403.2158.69.camel@DeepAttack>
	<001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
Message-ID: <20110414224301.GC6169@localhost.dummy.net>



Ahoj,

kdyby byl zajem mohl bych na pristi meetup prinest svuj `ARMboard' a predvest
ho i s vyvojovym prostredim co jsem pro nej vytvoril.

Je to sice jen AT91SAM7S256, takze na sve max frekvenci (55MHz) asi 2* pomalejsi CPU nez 
ten lpc1343 na svem maximu (72MHz), ale zase ma vetsi RAM (64KB oproti 8KB)
i FLASH (256KB oproti 32KB) a jeho periferie maji DMA (na rozdil od lpc1334), takze z 
hlediska celkove pouzitelnosti je priblizne srovnatelny.

Ta desticka co jsem pro nej udelal vypada jako ponekud sirsi DIL44 a ma na 
sobe ochranu proti prepolovani
napajeciho napeti, stabilizator napeti, operacni zesilovace pro analogove
vstupy a spoustu zenerek k ochrane I/O-pinu --- je zamyslena pro bastleni a
nesetrne zachazeni. Dale ma vyvedenou DBGU-seriovou linku (RS232), pres kterou 
se programuje.

Napsal jsem pro to (pro linux) komunikacni program s bootloaderem, linker
scripty pro gcc, opravil nekolik chyb v std. knihovnach gccka pro ARM
architekturu (spatne implementovane deleni) a napsal post-processor ktery
projede vysledny assembler a vyhazi z neho objekty (funkce a staticka
inicializovana data) ktere se nikdy nepouziji
(tim se obvykle vysledny program nekolikanasobne zmensi, zvlaste pokud
pouzivate knihovny).

Cele se to ovlada tak, ze napisete program v Ccku (nebo C++) a pak ho
prelozite prikazem 

axrun -l program.cc

Kde `axrun' je script, ktery zavola postupne kompilator Ccka, postprocessor,
linker a komunikacni program `armtalk', pomoci ktereho se prelozeny program nahraje do
RAM ARMboardu. Parametr -l rika ze chci program rovnou i spustit. 

Pro vyvoj je vyhodne nahravat program do RAM a nechat ho bezet odtamtud
(je to rychlejsi a neopotrebovavate si FLASH zbytecnym mazanim). Pokud
se program korektne vrati z funkce main() dostane se ARMboard zpet do vychoziho
stavu, kdy je mozno nahrat dalsi program. Pokud se zacykli, nezbyde nez pouzit
tlacitko reset (ktere jde pak v produkcni verzi vaseho vynalezu softwarove
odpojit nebo ho vyuzivat jen jako vstupni tlacitko). 

Pro vetsi programy, ktere se nevejdou do RAM je mozne volat

axrun -m dflash -l program.cc

coz zpusobi naprogramovani kodu do FLASH, ale tak, ze se neprepise
bootloader a po korektnim ukonceni main() je ARMboard zase pripraven k
programovani (vhodne pro vyvoj, dflash znamena `development flash memory
model'). Konecne 

axrun -m flash -l program.cc

nahraje do flash program tak, ze bude vzdy spusten po resetu, cili to co
ocekavate od finalni verze aplikace. Pomoci programu armtalk je mozne nastavit
i `pojistky', takze vas program nepujde z vnejsku precist (ani za pomoci
JTAG interfacu). 

Pokud chcete ARMboard vratit zpet do puvodniho stavu, staci zkratovat 
k tomu urceny jumper a zapnout na nekolik vterin napajeni. Tim se obnovi
bootloader a pri dalsim startu uz opet muzete pouzit armtalk.


Pak jsem napsal neco cemu rikam `bios', v nem jsou zakladni funkce jako
treba print, putc a definice I/O registru hardwaru, funkce pro programovani
FLASH pameti, atd.

Nyni mam rozpracovany real-time OS, non-realtime cast je uz prakticky hotova
(chybi napriklad jeste ovladac USB a alokator pameti), ale ostatni veci jako treba
prepinani procesu, alokovani preruseni, komunikace mezi procesy, obecny DMA
server (a z neho odvezny ovladac pro USART a ADC prevodnik) jsou uz hotove
a funkcni.

Spolupraci s debuggerem jsem neresil (nepouzivam debugger), nicmene OS,
pokud je prelozen s definovanym makrem DEBUG testuje ASSERTy a nektere fatalni chyby 
(jako treba pristup na nezarovanou adresu, zapis do *NULL a preteceni zasobniku 
jednotlivych vlaken) a v pripade, ze k nim dojde, zastavi program a na DBGU 
port (RS232) vypise adresu kde k chybe doslo a jmeno threadu ve kterem se to stalo.

Pomoci scriptu `axdis' pak muzete disassemblovat program.o soubor (abyste videli
adresy instrukci) a najit misto kde k chybe doslo. 

Neni to moc pohodlne ale na druhou stranu to clovek nepotrebuje casto,
vetsine chyb se da predejit pouzivanim makra ASSERT(podminka,vyraz), kde podminka
je boolean expression ktere kdyz nebude platit, zastavi se program a na
DBGU vypise ktera podminka selhala, na kterem radku ktereho filu to bylo a
jaka byla v tu dobu hodnota integer vyrazu `vyraz' a zastavi program.


Puvodne jsem to chtel releasenout az bude OS hotovy, ale jak tak koukam,
za rok uz by to nemuselo nikoho zajimat, protoze by mohli uz vsichni pouzivat
Cortex-M. Tak jsem se rozhodl riskovat, ze se to nebude libit pro svou
nedokoncenost a fakt, ze API OS se jeste bude asi menit (zpetne
nekompatibilne) a zverejnit to uz ted. Treba to nekoho zaujme.


Takze piste, kdo by rad videl ukazku.


David



> u mna to stroskotalo na tom ze doma pouzivam prevazne linux a ten debuger ma
> ovladace len pre widle
> nasiel som navod ako do discovery "nasipat" binarku cez seriovy prevodnik
> ale
> u 32bit procaku by som si netrufol vyvijat nieco bez moznosti debugu :-/
> 
> pokial dojdes v utorok na meetup radi ti ukazeme lpcxpresso osadene chipom
> lpc1343 ktory pod tucniakom beha.
> 
> pozdrav
> Sargon
> 
> 2011/4/13 Vitezslav.Zak <vitezslav.zak at mindstore.cz>
> 
> >  Tome,
> > diky za nabidku. Nazory na ten board probereme. Co jsem se docetl, tak jsou
> > tam komplikace s vyvojovym prostredim (licence, omezena funkcionalita, atd.)
> > ale parametry vic nez slusne. Cena super. Tak kde je zakopany pes?
> >
> > @Pavol,
> > pokud to nekomplikuje situaci, tak moji objednavku na stm32 discovery zrus.
> > Pokud uz je pozde, tak nevadi, nekomu se treba bude hodit.
> >
> > jeste jednou diky panove.
> >
> > V.
> >
> >
> >
> > On 13.4.2011 21:43, Tomislav Arnaudov wrote:
> >
> > Ahoj Vitec
> >
> >  STM32 Discovery mam v Brmlabe este nerozbalene :)
> > tiez som sa ulakomil na jeho cenu ale ma svoje muchy ...
> >
> >  pokial chces ja ti ho pozicam a mozes si ho skusit
> > pokial sa rozhodnes ze to je prave to co chces tak urcite sa bude este z
> > farnellu objednavat
> > a mozes si ho objednat neskor ... zatial budes mat samozrejme k dispozicii
> > ten moj
> >
> >  pozdrav
> > Sargon
> >
> >
> > 2011/4/13 <rainbof at gmail.com>
> >
> >> ahoj prihod mi tam 2x 1715487 + 2x ten krystal co je na arduinu nemuzu to
> >> ted nikde najit.
> >>
> >> O.
> >>
> >>
> >> Dne u?ivatel Tomas Suchan <tsuchan at seznam.cz> napsal:
> >>
> >> > Ahoj,
> >> >
> >> >
> >> >
> >> > prihod mi tam prosim:
> >> >
> >> >
> >> >
> >> > 1x 4745061
> >> >
> >> >
> >> >
> >> > Dekuji....
> >> >
> >> >
> >> >
> >> > TomSuch
> >> >
> >> >
> >> >
> >> > Pavol Rusnak p??e v St 13. 04. 2011 v 15:29 +0200:
> >> >
> >> > > Ahoj!
> >> >
> >> > >
> >> >
> >> > > Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak
> >> mi
> >> >
> >> > > do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
> >> >
> >> > > zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)
> >> >
> >> > >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> >
> >> > Brmlab mailing list
> >> >
> >> > Brmlab at brmlab.cz
> >> >
> >> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >> >
> >>
> >> _______________________________________________
> >> Brmlab mailing list
> >> Brmlab at brmlab.cz
> >> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >>
> >>
> >
> > _______________________________________________
> > Brmlab mailing listBrmlab at brmlab.czhttp://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
> >
> >
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
> >

> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From juca at members.fsf.org  Fri Apr 15 02:53:51 2011
From: juca at members.fsf.org (Felipe Sanches)
Date: Thu, 14 Apr 2011 21:53:51 -0300
Subject: [Brmlab] High Schoolers Push Down Price of Near-Space Photography
Message-ID: <BANLkTikZuMxkMhqWW9X9H-QDP_5C0t-jYg@mail.gmail.com>

 High Schoolers Push Down Price of Near-Space
Photography<http://hardware.slashdot.org/story/11/04/14/2028235/High-Schoolers-Push-Down-Price-of-Near-Space-Photography>
Posted by timothy <http://www.monkey.org/%7Etimothy/> on Thursday April 14,
@04:33PM
from the can-I-get-a-student-discount dept.
 Floodge <floodge1 at gmail.com> writes *"High School students at Explore
Knowledge Academy in Las Vegas, Nevada have launched a near space
photography balloon <http://www.projectviking.org/flight-pictures> which
took over 2000 pictures of Las Vegas, Henderson, Boulder City, Lake Mead,
Hoover Dam, Grand Canyon, and much more! The 'space craft' was built from
used and recycled components for under 60 dollars and was inspired by MIT
students Project Icarus in 2009."* Near-space photography via balloon isn't
quite new any more, but price is a great frontier to explore. And I'm glad
that there's a school called "Explore Knowledge Academy."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110414/04c0d446/attachment.html>

From axtheb at gmail.com  Fri Apr 15 09:50:13 2011
From: axtheb at gmail.com (Ax)
Date: Fri, 15 Apr 2011 09:50:13 +0200
Subject: [Brmlab] PC pro Brmlab, TV z Brmlabu
In-Reply-To: <BNEBJCHIKOICJLAPBAPHKENJDLAA.blackhead@blackhead.cz>
References: <20110414224010.f2d8a912.johny@2600.sk>
	<BNEBJCHIKOICJLAPBAPHKENJDLAA.blackhead@blackhead.cz>
Message-ID: <BANLkTim511moA1UncuYgaZc8wmu5Xa2sEA@mail.gmail.com>

Ja bych mohl treba dneska v pul pate nebo v nedeli cely den.

Ax


From blackhead at blackhead.cz  Fri Apr 15 16:19:56 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Fri, 15 Apr 2011 16:19:56 +0200
Subject: [Brmlab] PC pro Brmlab, TV z Brmlabu
In-Reply-To: <BANLkTim511moA1UncuYgaZc8wmu5Xa2sEA@mail.gmail.com>
Message-ID: <BNEBJCHIKOICJLAPBAPHEENLDLAA.blackhead@blackhead.cz>

Hm... ta nedele zni dobre.
Ale ja jeste nevim co a jak v nedeli.

Muzeme se domluvit, ze se ti ozvu v nedeli, podle situace? Je mi jasne, ze
kdyz si mezi tim domluvis neco jineho, tak nebudes k dispozici. Ja ale
proste zatim nemam presny termin. ;-)

Diky, ozvu se.
Cau
BH


-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
Ax
Sent: Friday, April 15, 2011 9:50 AM
To: Brmlab: Hackerspace Prague (main discussion)
Subject: Re: [Brmlab] PC pro Brmlab, TV z Brmlabu


Ja bych mohl treba dneska v pul pate nebo v nedeli cely den.

Ax
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From axtheb at gmail.com  Fri Apr 15 16:27:50 2011
From: axtheb at gmail.com (Ax)
Date: Fri, 15 Apr 2011 16:27:50 +0200
Subject: [Brmlab] PC pro Brmlab, TV z Brmlabu
In-Reply-To: <BNEBJCHIKOICJLAPBAPHEENLDLAA.blackhead@blackhead.cz>
References: <BANLkTim511moA1UncuYgaZc8wmu5Xa2sEA@mail.gmail.com>
	<BNEBJCHIKOICJLAPBAPHEENLDLAA.blackhead@blackhead.cz>
Message-ID: <BANLkTikOnrGuRFSV3n0xoxWY9kDMSPjc4Q@mail.gmail.com>

Tak jako tak budu v brmlabu

Dne 15.4.2011 16:21 "George Blackhead" <blackhead at blackhead.cz> napsal/a:

Hm... ta nedele zni dobre.
Ale ja jeste nevim co a jak v nedeli.

Muzeme se domluvit, ze se ti ozvu v nedeli, podle situace? Je mi jasne, ze
kdyz si mezi tim domluvis neco jineho, tak nebudes k dispozici. Ja ale
proste zatim nemam presny termin. ;-)

Diky, ozvu se.
Cau
BH



-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Beha...
Ax
Sent: Friday, April 15, 2011 9:50 AM
To: Brmlab: Hackerspace Prague (main discussion)

Subject: Re: [Brmlab] PC pro Brmlab, TV z Brmlabu

Ja bych mohl treba dneska v pul pate nebo v nedeli cely den.

Ax

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110415/61a70afd/attachment.html>

From stick at gk2.sk  Fri Apr 15 16:30:43 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Fri, 15 Apr 2011 16:30:43 +0200
Subject: [Brmlab] PC pro Brmlab, TV z Brmlabu
In-Reply-To: <BANLkTikOnrGuRFSV3n0xoxWY9kDMSPjc4Q@mail.gmail.com>
References: <BANLkTim511moA1UncuYgaZc8wmu5Xa2sEA@mail.gmail.com>	<BNEBJCHIKOICJLAPBAPHEENLDLAA.blackhead@blackhead.cz>
	<BANLkTikOnrGuRFSV3n0xoxWY9kDMSPjc4Q@mail.gmail.com>
Message-ID: <4DA85693.20502@gk2.sk>

On 04/15/2011 04:27 PM, Ax wrote:
> Tak jako tak budu v brmlabu

Heslo spravneho brmlabaka? :)

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From algoldor at yahoo.com  Sun Apr 17 11:20:07 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Sun, 17 Apr 2011 02:20:07 -0700 (PDT)
Subject: [Brmlab] mozno si pujcit klice od Brmlabu? 3-4 dny + rad bych se
	priucil, seznam nize
Message-ID: <592417.20202.qm@web111501.mail.gq1.yahoo.com>

Zdravim do Brmlabu!

V nedeli vecer prijedu do Prahy a rad bych tam zase tak dva, tri dny pracoval, 
pokud mozno hlavne z Brmlabu. Chtel bych se zeptat, zda je mozne si na ty 3-4 
dny od nekoho zapujcit klic.

Kdyby mel nekdo cas a chut se zapojit do nasledujicich aktivit/projektu, tak 
bych to jednoznacne uvital.

1) zprovozneni "experimentalniho inkubatoru," a presne zakresleni of electronic 
circuit
K tomuto projektu bych mel mit jiz vse potrebne, ted uz jde jen o to zapojit to 
do elektriny a arduina a znovu potvrdit fukncnost (posledni pozitivni test jsme 
udelali v Kielu, pred cca mesicem). Jak vite v elektronice jsem slabsi, tak bych 
se mile rad od ostatnich priucil, ale potrebuji to delat pak rukama sam abych si 
to pamatoval a ziskal zrusnost.

2) vytvoreni panoramatickych fotek
Jiz nekolik poslednich let fotim vzdy x snimku abych je mohl dat dohromady do 
panoramaticke fotky. Potrebuji se ted naucit, jak to udelat a s tim opravdu 
potrebuji pomoct. Chtel bych to delat pres open source, jedu linux Ubuntu. Umim 
pouzivat gimp na trochu lepsi nez zakladni urovni, ale jsem stale jeste celkem 
otevrenou knihou

3)  webove stranky (osekani a preformatovani)
Rad bych tohle s nekym prosel, protoze me webovky neplni svou funkci a nevim jak 
z toho. Vidim to ted tak, ze bych premenil svoje osobni webove stranky na domene 
http://frantisekapfelbeck.org  na zakladni pekne vypadajici "tablo" kde bude 
moje CV, par fotek, par zakladnich odkazu na me aktivity a praci a to je vse. 
Naprostou vetsinu svych aktivit bych daval na ruzne otevrene platformy jako 
media wiki pod Noisebridge, word press pod kvasi, foto galerii pod picasa a tak 
dale. Byl by nekdo ochoten mi s tim pomoci abych alespon vykrocil spravnym 
smerem? Posledne jsem do toho sel sam, vybral tikiwiki jako svuj format a hur 
jsem si asi opravdu vybrat nemohl, ztratil jsem s tim hodne casu.

Nuze to by byl seznam, pokud by jste byli ochotni s necim mi pomoci tak to by 
bylo fajn, chci se tyhle veci hlavne naucit a pochopit je. Kdyby mel nekdo zajem 
se priucit ci si zopakovat pripravu kombuchy, mlecneho kefiru ci vodniho kefiru 
(privezl jsem z Holanska), tak mi dejte vedet. Upozornuji, ze kultury si ale 
budete muset vzit domu aby to v Brmlabu nesmrdelo.

Budu se tesit,

Frantisek

PS V utery vecer mam schuzku ohledne mych Kubanskych aktivit k padesatemu vyroci 
boju v Zatoce Svini, takze na meeting do Brmlabu bohuzel nedorazim, ale zkusim 
neco maleho pripravit predem. 


From pasky at ucw.cz  Sun Apr 17 22:01:44 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Sun, 17 Apr 2011 22:01:44 +0200
Subject: [Brmlab] mozno si pujcit klice od Brmlabu? 3-4 dny + rad bych
 se priucil, seznam nize
In-Reply-To: <592417.20202.qm@web111501.mail.gq1.yahoo.com>
References: <592417.20202.qm@web111501.mail.gq1.yahoo.com>
Message-ID: <20110417200143.GU3258@machine.or.cz>

  Ahoj!

On Sun, Apr 17, 2011 at 02:20:07AM -0700, Frantisek Apfelbeck wrote:
> V nedeli vecer prijedu do Prahy a rad bych tam zase tak dva, tri dny pracoval, 
> pokud mozno hlavne z Brmlabu. Chtel bych se zeptat, zda je mozne si na ty 3-4 
> dny od nekoho zapujcit klic.
> 
> Kdyby mel nekdo cas a chut se zapojit do nasledujicich aktivit/projektu, tak 
> bych to jednoznacne uvital.

  Mame pravidlo, ze klice od brmlabu mohou mit pouze jeho clenove.
Bude-li Ti ale nekdo chtit pomoci s temi aktivitami, nemel by to byt
problem, kdyz Te do brmlabu pusti on. (Jestli chces dorazit jeste dnes,
tipl bych si, ze v brmlabu bude hodne lidi pomerne dlouho.)

  (Osobne bych moc rad pomohl, bohuzel s casem jsem na tom prachbidne,
a v prvni pulce tydne obzvlast...)

				Petr "Pasky" Baudis


From michal at tulacek.eu  Sun Apr 17 22:24:11 2011
From: michal at tulacek.eu (=?UTF-8?B?TWljaGFsIFR1bMOhxI1law==?=)
Date: Sun, 17 Apr 2011 22:24:11 +0200
Subject: [Brmlab] mozno si pujcit klice od Brmlabu? 3-4 dny + rad bych
 se priucil, seznam nize
In-Reply-To: <592417.20202.qm@web111501.mail.gq1.yahoo.com>
References: <592417.20202.qm@web111501.mail.gq1.yahoo.com>
Message-ID: <BANLkTi=POhjRa-uFekfj-w9M4p0n9xrGRw@mail.gmail.com>

>
>
>
> 2) vytvoreni panoramatickych fotek
> Jiz nekolik poslednich let fotim vzdy x snimku abych je mohl dat dohromady
> do
> panoramaticke fotky. Potrebuji se ted naucit, jak to udelat a s tim opravdu
> potrebuji pomoct. Chtel bych to delat pres open source, jedu linux Ubuntu.
> Umim
> pouzivat gimp na trochu lepsi nez zakladni urovni, ale jsem stale jeste
> celkem
> otevrenou knihou
>
>
Ahoj, mrkni na program Hugin, s tim jdou panoramaticke fotky jedna basen...

-mt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110417/030ef138/attachment.html>

From algoldor at yahoo.com  Sun Apr 17 22:50:24 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Sun, 17 Apr 2011 13:50:24 -0700 (PDT)
Subject: [Brmlab] je nekdo v Brmlabu v pondeli? od kdy?
Message-ID: <302219.76487.qm@web111509.mail.gq1.yahoo.com>

Ahoj Vsem,
Vi nekdo kdy prijde zitra 18/4 do Brmlabu? Nemam klic, takze nemuzu dovnitr 
dokud nedko nedorazi.

Dik s pozdravem,

Frantisek



From ruza at ruza.eu  Mon Apr 18 03:09:01 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Mon, 18 Apr 2011 03:09:01 +0200
Subject: [Brmlab] lightning talks
Message-ID: <4DAB8F2D.2050401@ruza.eu>

pripominam, ze prijimame prihlasky na dalsi kolo lightning talks

http://brmlab.cz/event/lightning_talks

PS: plati trvale
-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz


From ruza at ruza.eu  Mon Apr 18 03:29:11 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Mon, 18 Apr 2011 03:29:11 +0200
Subject: [Brmlab] ARM
In-Reply-To: <20110414224301.GC6169@localhost.dummy.net>
References: <1302720403.2158.69.camel@DeepAttack>	<001636c5ba1323951a04a0d17d69@google.com>	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>	<4DA60FB7.3050206@mindstore.cz>	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
Message-ID: <4DAB93E7.8000502@ruza.eu>

urcite se prijd i s tim svym dilem ukazat :) v brmlabu o napady neni
nouze a o aktivity vsemozneho druhu je tu vzdycky zajem

ruza

On 04/15/2011 12:43 AM, David Klusacek wrote:
> Ahoj,
> 
> kdyby byl zajem mohl bych na pristi meetup prinest svuj `ARMboard' a predvest
> ho i s vyvojovym prostredim co jsem pro nej vytvoril.


From klusacek at atrey.karlin.mff.cuni.cz  Mon Apr 18 13:35:44 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Mon, 18 Apr 2011 13:35:44 +0200
Subject: [Brmlab] ARM
In-Reply-To: <4DAB93E7.8000502@ruza.eu>
References: <1302720403.2158.69.camel@DeepAttack>
	<001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
	<4DAB93E7.8000502@ruza.eu>
Message-ID: <20110418113544.GA1869@localhost.dummy.net>


Muzu spolehat na to ze bude v brmlabu k dispozici VGA monitor (klidne LCD) a
USB klavesnice? Nechce se mi s tim tahat.


> urcite se prijd i s tim svym dilem ukazat :) v brmlabu o napady neni
> nouze a o aktivity vsemozneho druhu je tu vzdycky zajem
> 
> ruza
> 
> On 04/15/2011 12:43 AM, David Klusacek wrote:
> > Ahoj,
> > 
> > kdyby byl zajem mohl bych na pristi meetup prinest svuj `ARMboard' a predvest
> > ho i s vyvojovym prostredim co jsem pro nej vytvoril.
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab


From axtheb at gmail.com  Mon Apr 18 13:21:46 2011
From: axtheb at gmail.com (Ax)
Date: Mon, 18 Apr 2011 13:21:46 +0200
Subject: [Brmlab] =?utf-8?q?Sl=C3=ADben=C3=BD_mail_o_psech!?=
Message-ID: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>

Zdar,
  na minul?m meetupu se ?e?ilo, jak zach?zet se psy v brmlabu. Do?lo
se ??ste?n? ke konsezu (psi do brmlabu nepat??) - nedosp?li jsme k
z?v?ru, jak se postavit k prezentaci t?to informace. J? jsem pro n?pis
na dve??ch (Nech?vejte psy venku nebo z nich nad?l?me vzorky pro
biolab), p??padn? n?jakou jednoduchou infografiku.

Ax


From algoldor at yahoo.com  Mon Apr 18 13:22:17 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Mon, 18 Apr 2011 04:22:17 -0700 (PDT)
Subject: [Brmlab] [Rada] mozno si pujcit klice od Brmlabu? 3-4 dny + rad
	bych se priucil, seznam nize
In-Reply-To: <4DAC0C49.1090700@gk2.sk>
References: <592417.20202.qm@web111501.mail.gq1.yahoo.com>
	<20110417200143.GU3258@machine.or.cz> <4DAB92FF.40705@ruza.eu>
	<20110418083513.GW3258@machine.or.cz> <4DAC0C49.1090700@gk2.sk>
Message-ID: <873773.92469.qm@web111505.mail.gq1.yahoo.com>

Ahoj ve spolek,
Tak to jsem rad, ze jsem se trefil "do tematu" aniz bych tusil jak je aktualni. 

Myslim, si, ze Petrova poznamka k "vyjimkam" je velmi korektni a dulezita, na 
formu precedenc pozor. 


Behem posledni snury co jsem mel po Evropskych hacker spaces + Noisebridge jsem 
na dane tema videl celou radu pristupu, kdy napriklad v C-base nemeli neclenove 
vubec pristup do spodnich pater a prostor a jen nekteri clenove meli pristup do 
urcitych mist (take to bylo do urcite miry ohebne, ale pravidlo tak znelo). 
Oproti tomu v Noisebridge je uplne jedno zda je clovek clen ci ne, klic muze 
dostat jak clen tak neclen, spis se to bere podle toho zda uz jej lidi znaji a 
ma duveru komunity. Noisebridge ma jako prioritu co nejvetsi otevrenost a nekdy 
je to az extremni, nedelejme si iluze byly s tim i problemy. 


Na druhou stranu pokud nekdo opravdu do Brmlabu chce, tak muze poustnout a nekdo 
ho pusti, musi si ale dat vice casu se zajistenim pristupu ci si zkratka zaplati 
clensky poplatek a predpokladam, ze je vyreseno (apropo stat se clenem 
Noisebridge je o neco slozitejsi, trva to minimalne mesic a schvaluje se na 
zaklade consensus pristupu). Obe variatny maji svou logiku a funkcnost a zalezi 
na komunite, jak si to nastavi.

Ja jsem byl uz nucen o "otevrenosti pristupu" do hacker center premyslet a 
priznam se, ze by se mi libilo mit treba domluvu mezi centry (at predchozi ci 
rychle uzavrenou), ze kdyz prijede hacker, ktery je platicim clenem Brmlabu do 
Noisebridge (ci C-base atd.), tak ma cca stejna prava na vyuziti prostor jako 
clen tohoto hacker centra a naopak. V zasade by pak stacilo napsat na disccusson 
list ci to treasurer zda danou osobu zna, zda plati a pokud komunita souhlasi 
muze tu byt nove "pravidlo".  


Ja jsem ted osobne prerusil placeni poplatku v Noisebridge protoze mam problemy 
jak s prevody, tak s financemi neb shanim jeste cca $900 abych mohl projekt v 
Japonsku udelat dle svych predstav. Long story short, zda se mi, ze jestli tu 
budu "vice nez par dni" mineno dva tydny ci vic, tak zaplatit nejaky 
poplatek/udelat donaci ve vysi mesicniho clenstvi a ziskat za to pristup do 
hacker centra mi prijde rozumne.

Nuze dnes se doufam vsichni uvidime, budu se tesit hlavne na praci na 
fotografiich.

S pozdravem,

Frantisek

PS Kdyby nekdo chtel tak mam nove fermenty, ktere jsou anaerobni, takze by se 
dali delat v brmlabu a nesmrdeli by.





----- Original Message ----
From: Pavol Rusnak <stick at gk2.sk>
To: rada at brmlab.cz
Cc: Frantisek Apfelbeck <algoldor at yahoo.com>
Sent: Mon, April 18, 2011 11:02:49 AM
Subject: Re: [Rada] [Brmlab] mozno si pujcit klice od Brmlabu? 3-4 dny + rad 
bych se priucil, seznam nize

On 18/04/11 10:35, Petr Baudis wrote:
> rozmyslet; myslim, ze rozhodne nestaci, ze "nekoho uz zname" - to by
> platilo pro spoustu lidi, kteri (jeste) nejsou cleny. Na "je to jen
> na par dni" ted zadnou odpoved nemam, ale muj gut feeling rika, ze mi
> ani to moc nestaci.

Co ale neplati pre spoustu ludi je, ze Frantisek u nas spravil 3-dnovy
workshop, ktory pritiahol kopec ludi, ktori u nas dovtedy neboli.
Nechcem vytvarat oficialny statut "cestneho clena" s podrobnym popisom
vyhod a ako sa nim stat, ale som za to, ze ak niekto spravi u nas vacsi
event tak nebude mat problem v buducnosti ziskat "temporary access" do
brmlabu*. Samozrejme, ak sa bude jednat o dlhsiu dobu ako tyzden ci dva,
budem aj ja za to aby sa dotycny stal clenom hoci aj na jeden mesiac.

* To je jedna z mala veci co mozme poskytnut a nic nas to nestoji.
Minule som sa bavil o moznosti jedneho workshopu u nas a dotycny sa ma
hned pytal kolko $$$ za to dostane (po odpovedi ze nic sa az tak nadsene
netvaril). Takze ja osobne som za kazdy free workshop velmi vdacny.

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>



From ruza at ruza.eu  Mon Apr 18 13:24:13 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Mon, 18 Apr 2011 13:24:13 +0200
Subject: [Brmlab] ARM
In-Reply-To: <20110418113544.GA1869@localhost.dummy.net>
References: <1302720403.2158.69.camel@DeepAttack>	<001636c5ba1323951a04a0d17d69@google.com>	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>	<4DA60FB7.3050206@mindstore.cz>	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>	<20110414224301.GC6169@localhost.dummy.net>	<4DAB93E7.8000502@ruza.eu>
	<20110418113544.GA1869@localhost.dummy.net>
Message-ID: <4DAC1F5D.5000305@ruza.eu>

zobrazovadlo urcite, usb klavesnice jsou trochu nedostatkovej artikl
(vidim tu jednu s japonskou lokalizaci :))

ruza

On 04/18/2011 01:35 PM, David Klusacek wrote:
> Muzu spolehat na to ze bude v brmlabu k dispozici VGA monitor (klidne LCD) a
> USB klavesnice? Nechce se mi s tim tahat.


From chidori at emptytriangle.com  Mon Apr 18 13:27:40 2011
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Mon, 18 Apr 2011 13:27:40 +0200
Subject: [Brmlab] =?iso-8859-1?q?Sl=EDben=FD_mail_o_psech!?=
In-Reply-To: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
Message-ID: <BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>

Suhlasim s dog-free brmlabom - nebola som na meetupe tak dodatocne aspon.
Pripomen sa mi zajtra a nieco ad hoc stvorim, mozno aj ilustrativne :)

chido

2011/4/18 Ax <axtheb at gmail.com>:
> Zdar,
> ?na minul?m meetupu se ?e?ilo, jak zach?zet se psy v brmlabu. Do?lo
> se ??ste?n? ke konsezu (psi do brmlabu nepat??) - nedosp?li jsme k
> z?v?ru, jak se postavit k prezentaci t?to informace. J? jsem pro n?pis
> na dve??ch (Nech?vejte psy venku nebo z nich nad?l?me vzorky pro
> biolab), p??padn? n?jakou jednoduchou infografiku.
>
> Ax
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>



-- 
"It is not birth, marriage, or death, but gastrulation which is truly
the most important time in your life."? ? Lewis Wolpert


From klusacek at atrey.karlin.mff.cuni.cz  Mon Apr 18 14:00:07 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Mon, 18 Apr 2011 14:00:07 +0200
Subject: [Brmlab] ARM
In-Reply-To: <4DAC1F5D.5000305@ruza.eu>
References: <1302720403.2158.69.camel@DeepAttack>
	<001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
	<4DAB93E7.8000502@ruza.eu>
	<20110418113544.GA1869@localhost.dummy.net>
	<4DAC1F5D.5000305@ruza.eu>
Message-ID: <20110418120007.GB2254@localhost.dummy.net>


> zobrazovadlo urcite, usb klavesnice jsou trochu nedostatkovej artikl
> (vidim tu jednu s japonskou lokalizaci :))

Dobre, klavesnici vezmu. Doufam ale ze to bude vubec nekoho zajimat, zatim
ses ozval jen ty.



From rainbof at gmail.com  Mon Apr 18 13:52:24 2011
From: rainbof at gmail.com (rainbof at gmail.com)
Date: Mon, 18 Apr 2011 11:52:24 +0000
Subject: [Brmlab] ARM
In-Reply-To: <20110418120007.GB2254@localhost.dummy.net>
Message-ID: <0015174beef4609fa004a1300694@google.com>

me by to taky zajimalo i kdyz jsem taknejak laik vrchol meho snazeni je  
arduino :D. Nicm?n? r?d se n?co p?iu?im...


Dne u?ivatel David Klusacek <klusacek at atrey.karlin.mff.cuni.cz> napsal:


> > zobrazovadlo urcite, usb klavesnice jsou trochu nedostatkovej artikl

> > (vidim tu jednu s japonskou lokalizaci :))



> Dobre, klavesnici vezmu. Doufam ale ze to bude vubec nekoho zajimat, zatim

> ses ozval jen ty.



> _______________________________________________

> Brmlab mailing list

> Brmlab at brmlab.cz

> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110418/85e4baa1/attachment.html>

From michal at tulacek.eu  Mon Apr 18 14:05:22 2011
From: michal at tulacek.eu (=?UTF-8?B?TWljaGFsIFR1bMOhxI1law==?=)
Date: Mon, 18 Apr 2011 14:05:22 +0200
Subject: [Brmlab] =?utf-8?q?Sl=C3=ADben=C3=BD_mail_o_psech!?=
In-Reply-To: <BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>
Message-ID: <BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>

PES = dog nebo prodluzovac elektricke site?

-mt


2011/4/18 Radka Haneckova <chidori at emptytriangle.com>

> Suhlasim s dog-free brmlabom - nebola som na meetupe tak dodatocne aspon.
> Pripomen sa mi zajtra a nieco ad hoc stvorim, mozno aj ilustrativne :)
>
> chido
>
> 2011/4/18 Ax <axtheb at gmail.com>:
> > Zdar,
> >  na minul?m meetupu se ?e?ilo, jak zach?zet se psy v brmlabu. Do?lo
> > se ??ste?n? ke konsezu (psi do brmlabu nepat??) - nedosp?li jsme k
> > z?v?ru, jak se postavit k prezentaci t?to informace. J? jsem pro n?pis
> > na dve??ch (Nech?vejte psy venku nebo z nich nad?l?me vzorky pro
> > biolab), p??padn? n?jakou jednoduchou infografiku.
> >
> > Ax
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
>
>
>
> --
> "It is not birth, marriage, or death, but gastrulation which is truly
> the most important time in your life."    Lewis Wolpert
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110418/d9d370af/attachment.html>

From niekt0 at hysteria.sk  Mon Apr 18 14:06:58 2011
From: niekt0 at hysteria.sk (niekt0)
Date: Mon, 18 Apr 2011 14:06:58 +0200
Subject: [Brmlab] =?iso-8859-1?q?Sl=EDben=FD_mail_o_psech!?=
In-Reply-To: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
Message-ID: <BANLkTinybmHOH3DrHsOjbnU3Au3DbqDaQQ@mail.gmail.com>

Ja som tiez nazoru, ze psy v brme nie su dobry napad.

Zaroven sa ale bojim aby sme nedopadli ako na urade,
kde pri vchode clovek najde 10 zakazov/prikazov.

Som skor za operativne riesenie,
predsa len pes v brmlabe je pomerne riedka udalost,
po upozorneni ten konkretny pes uz pravdepodobne nepride
(teda konkretny pes to skusi prave raz;)
Aj v pripade ze o tom clovek nevedel a prisiel s psom,
mame rozumne velky dvor kde moze cokel pockat.

n.


On 4/18/11, Ax <axtheb at gmail.com> wrote:
> Zdar,
>   na minul?m meetupu se ?e?ilo, jak zach?zet se psy v brmlabu. Do?lo
> se ??ste?n? ke konsezu (psi do brmlabu nepat??) - nedosp?li jsme k
> z?v?ru, jak se postavit k prezentaci t?to informace. J? jsem pro n?pis
> na dve??ch (Nech?vejte psy venku nebo z nich nad?l?me vzorky pro
> biolab), p??padn? n?jakou jednoduchou infografiku.
>
> Ax
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>


From axtheb at gmail.com  Mon Apr 18 14:16:00 2011
From: axtheb at gmail.com (Ax)
Date: Mon, 18 Apr 2011 14:16:00 +0200
Subject: [Brmlab] =?utf-8?q?Sl=C3=ADben=C3=BD_mail_o_psech!?=
In-Reply-To: <BANLkTinybmHOH3DrHsOjbnU3Au3DbqDaQQ@mail.gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTinybmHOH3DrHsOjbnU3Au3DbqDaQQ@mail.gmail.com>
Message-ID: <BANLkTikfZ-QzGnET_spj+VO_5oEx5VZvkg@mail.gmail.com>

2011/4/18 niekt0 <niekt0 at hysteria.sk>:
> Ja som tiez nazoru, ze psy v brme nie su dobry napad.
>
> Zaroven sa ale bojim aby sme nedopadli ako na urade,
> kde pri vchode clovek najde 10 zakazov/prikazov.

M?m pocit, ?e tu byl n?jak? pes ka?dou v?t?? ve?ejnou akci. Zaj?mav?
alternativa k z?kazu na dve??ch by byla cedule na parkovi?ti s n?pisem
"M?sto pro parkov?n? ps?" nebo tak n?jak.

Ax


From stick at gk2.sk  Mon Apr 18 14:16:43 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Mon, 18 Apr 2011 14:16:43 +0200
Subject: [Brmlab] =?iso-8859-1?q?Sl=EDben=FD_mail_o_psech!?=
In-Reply-To: <BANLkTinybmHOH3DrHsOjbnU3Au3DbqDaQQ@mail.gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTinybmHOH3DrHsOjbnU3Au3DbqDaQQ@mail.gmail.com>
Message-ID: <BANLkTin0dKMYBpNjpXZGQxCkOWAmo-RFjQ@mail.gmail.com>

Problem je s tym ze KTO bude upozornovat. Ja nikomu policajta robit nebudem.
Preto som radsej za oznam na dverach. (Majitel psa poliateho kyselinou sa
stazovat nemoze ze mu nikto nepovedal ze mat psa v brmlabe je zly napad)
On Apr 18, 2011 2:07 PM, "niekt0" <niekt0 at hysteria.sk> wrote:
> Ja som tiez nazoru, ze psy v brme nie su dobry napad.
>
> Zaroven sa ale bojim aby sme nedopadli ako na urade,
> kde pri vchode clovek najde 10 zakazov/prikazov.
>
> Som skor za operativne riesenie,
> predsa len pes v brmlabe je pomerne riedka udalost,
> po upozorneni ten konkretny pes uz pravdepodobne nepride
> (teda konkretny pes to skusi prave raz;)
> Aj v pripade ze o tom clovek nevedel a prisiel s psom,
> mame rozumne velky dvor kde moze cokel pockat.
>
> n.
>
>
> On 4/18/11, Ax <axtheb at gmail.com> wrote:
>> Zdar,
>> na minul?m meetupu se ?e?ilo, jak zach?zet se psy v brmlabu. Do?lo
>> se ??ste?n? ke konsezu (psi do brmlabu nepat??) - nedosp?li jsme k
>> z?v?ru, jak se postavit k prezentaci t?to informace. J? jsem pro n?pis
>> na dve??ch (Nech?vejte psy venku nebo z nich nad?l?me vzorky pro
>> biolab), p??padn? n?jakou jednoduchou infografiku.
>>
>> Ax
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110418/863dd3c7/attachment.html>

From pasky at ucw.cz  Mon Apr 18 15:03:24 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 18 Apr 2011 15:03:24 +0200
Subject: [Brmlab] =?iso-8859-2?q?Sl=EDben=FD_mail_o_psech!?=
In-Reply-To: <BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>
	<BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>
Message-ID: <20110418130324.GB3258@machine.or.cz>

On Mon, Apr 18, 2011 at 02:05:22PM +0200, Michal Tul??ek wrote:
> PES = dog nebo prodluzovac elektricke site?

Dotaz hodny praveho hackera. Prodluzovace vsak pouzivame hojne a zivot
bez nich tezko predstaviti si.

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From chidori at emptytriangle.com  Mon Apr 18 15:07:34 2011
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Mon, 18 Apr 2011 15:07:34 +0200
Subject: [Brmlab] =?iso-8859-1?q?Sl=EDben=FD_mail_o_psech!?=
In-Reply-To: <20110418130324.GB3258@machine.or.cz>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>
	<BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>
	<20110418130324.GB3258@machine.or.cz>
Message-ID: <BANLkTimjsq_hQwZ+1owH=Aui7Mhho8HboA@mail.gmail.com>

Ja policajtovat rozhodne nemienim. Psov sa bojim ale napriek tomu som
sa neodhodlala upozornit ziadneho z majitelov na nevitanost jeho
stvronoheho pokladu kedze sa mi nechcelo zaujat rolu hnusnej zlej tety
co nenavidi zvieratka...
oznam nemusi byt strohy ani prisny, mohlo by to byt nieco vesele a
rada to vytvorim :) ten napad s predlzovackami sa mi paci :D

2011/4/18 Petr Baudis <pasky at ucw.cz>:
> On Mon, Apr 18, 2011 at 02:05:22PM +0200, Michal Tul??ek wrote:
>> PES = dog nebo prodluzovac elektricke site?
>
> Dotaz hodny praveho hackera. Prodluzovace vsak pouzivame hojne a zivot
> bez nich tezko predstaviti si.
>
> --
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Petr "Pasky" Baudis
> UNIX is user friendly, it's just picky about who its friends are.
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>



-- 
"It is not birth, marriage, or death, but gastrulation which is truly
the most important time in your life."? ? Lewis Wolpert


From ruza at ruza.eu  Mon Apr 18 15:17:19 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Mon, 18 Apr 2011 15:17:19 +0200
Subject: [Brmlab] =?iso-8859-2?q?Sl=EDben=FD_mail_o_psech!?=
In-Reply-To: <BANLkTimjsq_hQwZ+1owH=Aui7Mhho8HboA@mail.gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>	<BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>	<20110418130324.GB3258@machine.or.cz>
	<BANLkTimjsq_hQwZ+1owH=Aui7Mhho8HboA@mail.gmail.com>
Message-ID: <4DAC39DF.70003@ruza.eu>

nejlepsi pojeti takoveho varovani/doporuceni mi prijde ne ze psi v
brmlabu zakazujeme z nejakych antipatii apod, nybrz ze prostory brmlabu
pro ne povazujeme za prilis nebezpecne prostredi a chceme tak predejit
pripadnym neprijemnostem.

ruza

On 04/18/2011 03:07 PM, Radka Haneckova wrote:
> Ja policajtovat rozhodne nemienim. Psov sa bojim ale napriek tomu som
> sa neodhodlala upozornit ziadneho z majitelov na nevitanost jeho
> stvronoheho pokladu kedze sa mi nechcelo zaujat rolu hnusnej zlej tety
> co nenavidi zvieratka...
> oznam nemusi byt strohy ani prisny, mohlo by to byt nieco vesele a
> rada to vytvorim :) ten napad s predlzovackami sa mi paci :D


From jakub.hybler at gmail.com  Mon Apr 18 16:31:29 2011
From: jakub.hybler at gmail.com (Jakub)
Date: Mon, 18 Apr 2011 16:31:29 +0200
Subject: [Brmlab] =?utf-8?q?Sl=C3=ADben=C3=BD_mail_o_psech!?=
In-Reply-To: <4DAC39DF.70003@ruza.eu>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>
	<BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>
	<20110418130324.GB3258@machine.or.cz>
	<BANLkTimjsq_hQwZ+1owH=Aui7Mhho8HboA@mail.gmail.com>
	<4DAC39DF.70003@ruza.eu>
Message-ID: <C6652D96-B96C-43C7-B3AC-0D9C1328E886@gmail.com>

co takovy komix strip s pribehem ??

Jjh

On 18.4.2011, at 15:17, Pavel Ruzicka <ruza at ruza.eu> wrote:

> nejlepsi pojeti takoveho varovani/doporuceni mi prijde ne ze psi v
> brmlabu zakazujeme z nejakych antipatii apod, nybrz ze prostory  
> brmlabu
> pro ne povazujeme za prilis nebezpecne prostredi a chceme tak predejit
> pripadnym neprijemnostem.
>
> ruza
>
> On 04/18/2011 03:07 PM, Radka Haneckova wrote:
>> Ja policajtovat rozhodne nemienim. Psov sa bojim ale napriek tomu som
>> sa neodhodlala upozornit ziadneho z majitelov na nevitanost jeho
>> stvronoheho pokladu kedze sa mi nechcelo zaujat rolu hnusnej zlej  
>> tety
>> co nenavidi zvieratka...
>> oznam nemusi byt strohy ani prisny, mohlo by to byt nieco vesele a
>> rada to vytvorim :) ten napad s predlzovackami sa mi paci :D
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab


From algoldor at yahoo.com  Mon Apr 18 17:10:00 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Mon, 18 Apr 2011 08:10:00 -0700 (PDT)
Subject: [Brmlab] ARM
In-Reply-To: <20110418120007.GB2254@localhost.dummy.net>
References: <1302720403.2158.69.camel@DeepAttack>
	<001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
	<4DAB93E7.8000502@ruza.eu>
	<20110418113544.GA1869@localhost.dummy.net>
	<4DAC1F5D.5000305@ruza.eu>
	<20110418120007.GB2254@localhost.dummy.net>
Message-ID: <452200.29220.qm@web111502.mail.gq1.yahoo.com>

Ahoj Dorazis dnes vecer? Ja teprve zacinam s arduinem, ale urcite by me zajimala 
dalsi platforma. Zjistil jsem, ze cloveku pak lecos dojde, kdyz se ma moznost 
podivat na ruzne typy reseni danych problematik.


Ja dorazim pred sedmou, ted kvasim livance.

Ahoj Frantisek



----- Original Message ----
From: David Klusacek <klusacek at atrey.karlin.mff.cuni.cz>
To: Brmlab: Hackerspace Prague (main discussion) <brmlab at brmlab.cz>
Sent: Mon, April 18, 2011 1:00:07 PM
Subject: Re: [Brmlab] ARM


> zobrazovadlo urcite, usb klavesnice jsou trochu nedostatkovej artikl
> (vidim tu jednu s japonskou lokalizaci :))

Dobre, klavesnici vezmu. Doufam ale ze to bude vubec nekoho zajimat, zatim
ses ozval jen ty.

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From algoldor at yahoo.com  Mon Apr 18 17:11:50 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Mon, 18 Apr 2011 08:11:50 -0700 (PDT)
Subject: [Brmlab] =?iso-8859-1?q?Sl=EDben=FD_mail_o_psech!?=
In-Reply-To: <C6652D96-B96C-43C7-B3AC-0D9C1328E886@gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>
	<BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>
	<20110418130324.GB3258@machine.or.cz>
	<BANLkTimjsq_hQwZ+1owH=Aui7Mhho8HboA@mail.gmail.com>
	<4DAC39DF.70003@ruza.eu>
	<C6652D96-B96C-43C7-B3AC-0D9C1328E886@gmail.com>
Message-ID: <560540.35184.qm@web111501.mail.gq1.yahoo.com>

A co takhle neco ve stylu jiz proflaknute klasiky?

http://sranda.kdecoje.cz/srandovni_obrazky/i904-Kockonos.html




----- Original Message ----
From: Jakub <jakub.hybler at gmail.com>
To: Brmlab: Hackerspace Prague (main discussion) <brmlab at brmlab.cz>
Sent: Mon, April 18, 2011 3:31:29 PM
Subject: Re: [Brmlab] Sl?ben? mail o psech!

co takovy komix strip s pribehem ??

Jjh

On 18.4.2011, at 15:17, Pavel Ruzicka <ruza at ruza.eu> wrote:

> nejlepsi pojeti takoveho varovani/doporuceni mi prijde ne ze psi v
> brmlabu zakazujeme z nejakych antipatii apod, nybrz ze prostory brmlabu
> pro ne povazujeme za prilis nebezpecne prostredi a chceme tak predejit
> pripadnym neprijemnostem.
> 
> ruza
> 
> On 04/18/2011 03:07 PM, Radka Haneckova wrote:
>> Ja policajtovat rozhodne nemienim. Psov sa bojim ale napriek tomu som
>> sa neodhodlala upozornit ziadneho z majitelov na nevitanost jeho
>> stvronoheho pokladu kedze sa mi nechcelo zaujat rolu hnusnej zlej tety
>> co nenavidi zvieratka...
>> oznam nemusi byt strohy ani prisny, mohlo by to byt nieco vesele a
>> rada to vytvorim :) ten napad s predlzovackami sa mi paci :D
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From vatoz at seznam.cz  Mon Apr 18 17:14:23 2011
From: vatoz at seznam.cz (=?us-ascii?Q?Vaclav=20Cerny?=)
Date: Mon, 18 Apr 2011 17:14:23 +0200 (CEST)
Subject: [Brmlab] ARM
In-Reply-To: <452200.29220.qm@web111502.mail.gq1.yahoo.com>
Message-ID: <24985.9767.20329-7338-1944754996-1303139663@seznam.cz>

Ahoj, 
dorazim.
Kvaseni livancu - to zni uzasne.
Vasek

> ------------ P?vodn? zpr?va ------------
> Od: Frantisek Apfelbeck <algoldor at yahoo.com>
> P?edm?t: Re: [Brmlab] ARM
> Datum: 18.4.2011 17:11:10
> ----------------------------------------
> Ahoj Dorazis dnes vecer? Ja teprve zacinam s arduinem, ale urcite by me zajimala
> 
> dalsi platforma. Zjistil jsem, ze cloveku pak lecos dojde, kdyz se ma moznost 
> podivat na ruzne typy reseni danych problematik.
> 
> 
> Ja dorazim pred sedmou, ted kvasim livance.
> 
> Ahoj Frantisek
> 
> 
> 
> ----- Original Message ----
> From: David Klusacek <klusacek at atrey.karlin.mff.cuni.cz>
> To: Brmlab: Hackerspace Prague (main discussion) <brmlab at brmlab.cz>
> Sent: Mon, April 18, 2011 1:00:07 PM
> Subject: Re: [Brmlab] ARM
> 
> 
> > zobrazovadlo urcite, usb klavesnice jsou trochu nedostatkovej artikl
> > (vidim tu jednu s japonskou lokalizaci :))
> 
> Dobre, klavesnici vezmu. Doufam ale ze to bude vubec nekoho zajimat, zatim
> ses ozval jen ty.
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 
> 
> 


From klusacek at atrey.karlin.mff.cuni.cz  Mon Apr 18 17:45:21 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Mon, 18 Apr 2011 17:45:21 +0200
Subject: [Brmlab] ARM
In-Reply-To: <452200.29220.qm@web111502.mail.gq1.yahoo.com>
References: <001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
	<4DAB93E7.8000502@ruza.eu>
	<20110418113544.GA1869@localhost.dummy.net>
	<4DAC1F5D.5000305@ruza.eu>
	<20110418120007.GB2254@localhost.dummy.net>
	<452200.29220.qm@web111502.mail.gq1.yahoo.com>
Message-ID: <20110418154521.GB12887@localhost.dummy.net>



> Ahoj Dorazis dnes vecer? Ja teprve zacinam s arduinem, ale urcite by me zajimala 
> dalsi platforma. Zjistil jsem, ze cloveku pak lecos dojde, kdyz se ma moznost 
> podivat na ruzne typy reseni danych problematik.


Ahoj, ja myslel ze meetup je az zitra? Nebo se mylim? 




From rainbof at gmail.com  Mon Apr 18 18:19:51 2011
From: rainbof at gmail.com (Ondrej Beranek)
Date: Mon, 18 Apr 2011 18:19:51 +0200
Subject: [Brmlab] ARM
In-Reply-To: <20110418154521.GB12887@localhost.dummy.net>
References: <001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
	<4DAB93E7.8000502@ruza.eu>
	<20110418113544.GA1869@localhost.dummy.net>
	<4DAC1F5D.5000305@ruza.eu>
	<20110418120007.GB2254@localhost.dummy.net>
	<452200.29220.qm@web111502.mail.gq1.yahoo.com>
	<20110418154521.GB12887@localhost.dummy.net>
Message-ID: <BANLkTin3k9_b7sy6ao2iUvyQQj3L9K603w@mail.gmail.com>

ano je zitra podle klasickeho programu :D

Dne 18. dubna 2011 17:45 David Klusacek
<klusacek at atrey.karlin.mff.cuni.cz>napsal(a):

>
>
> > Ahoj Dorazis dnes vecer? Ja teprve zacinam s arduinem, ale urcite by me
> zajimala
> > dalsi platforma. Zjistil jsem, ze cloveku pak lecos dojde, kdyz se ma
> moznost
> > podivat na ruzne typy reseni danych problematik.
>
>
> Ahoj, ja myslel ze meetup je az zitra? Nebo se mylim?
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110418/b844bec4/attachment.html>

From klusacek at atrey.karlin.mff.cuni.cz  Mon Apr 18 20:06:45 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Mon, 18 Apr 2011 20:06:45 +0200
Subject: [Brmlab] ARM
In-Reply-To: <452200.29220.qm@web111502.mail.gq1.yahoo.com>
References: <001636c5ba1323951a04a0d17d69@google.com>
	<BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
	<4DAB93E7.8000502@ruza.eu>
	<20110418113544.GA1869@localhost.dummy.net>
	<4DAC1F5D.5000305@ruza.eu>
	<20110418120007.GB2254@localhost.dummy.net>
	<452200.29220.qm@web111502.mail.gq1.yahoo.com>
Message-ID: <20110418180645.GA13607@localhost.dummy.net>



> Ahoj Dorazis dnes vecer? Ja teprve zacinam s arduinem, ale urcite by me
> zajimala dalsi platforma. Zjistil jsem, ze cloveku pak lecos dojde, kdyz
> se ma moznost podivat na ruzne typy reseni danych problematik.

Dnes bohuzel nemuzu. Ale jestli o ARMboard bude zajem tak muzu v budoucnu
pripravit nejakou prednasku, tentokrat uz zamerenou na nejaky prakticky
problem, ktery si vyberete, namatkou: komunikace s pocitacem pres USB (az
dokoncim driver), pouziti ARMu k rizeni motoru, prijem radiovych signalu a
SW jejich demodulace (napr. hodinovy signal DCF-77)....


David



From pasky at ucw.cz  Mon Apr 18 19:49:13 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 18 Apr 2011 19:49:13 +0200
Subject: [Brmlab] ARM
In-Reply-To: <20110418180645.GA13607@localhost.dummy.net>
References: <BANLkTi=bi4=T2VvCx4Q-rE6ZuXRagy3hTg@mail.gmail.com>
	<4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
	<4DAB93E7.8000502@ruza.eu>
	<20110418113544.GA1869@localhost.dummy.net>
	<4DAC1F5D.5000305@ruza.eu>
	<20110418120007.GB2254@localhost.dummy.net>
	<452200.29220.qm@web111502.mail.gq1.yahoo.com>
	<20110418180645.GA13607@localhost.dummy.net>
Message-ID: <20110418174913.GG3258@machine.or.cz>

On Mon, Apr 18, 2011 at 08:06:45PM +0200, David Klusacek wrote:
> > Ahoj Dorazis dnes vecer? Ja teprve zacinam s arduinem, ale urcite by me
> > zajimala dalsi platforma. Zjistil jsem, ze cloveku pak lecos dojde, kdyz
> > se ma moznost podivat na ruzne typy reseni danych problematik.
> 
> Dnes bohuzel nemuzu. Ale jestli o ARMboard bude zajem tak muzu v budoucnu
> pripravit nejakou prednasku, tentokrat uz zamerenou na nejaky prakticky
> problem, ktery si vyberete, namatkou: komunikace s pocitacem pres USB (az
> dokoncim driver), pouziti ARMu k rizeni motoru, prijem radiovych signalu a
> SW jejich demodulace (napr. hodinovy signal DCF-77)....

Zkus si pokecat s lidmi kolem edubrmu (asi zejmena sargonem), edubrm je
take postaveny na ARMu. Treba by slo spojit sily. :-)

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From klusacek at atrey.karlin.mff.cuni.cz  Mon Apr 18 20:37:37 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Mon, 18 Apr 2011 20:37:37 +0200
Subject: [Brmlab] ARM
In-Reply-To: <20110418174913.GG3258@machine.or.cz>
References: <4DA60FB7.3050206@mindstore.cz>
	<BANLkTin5jRa7wQPSi5TNhqWHQL-ThDoetA@mail.gmail.com>
	<20110414224301.GC6169@localhost.dummy.net>
	<4DAB93E7.8000502@ruza.eu>
	<20110418113544.GA1869@localhost.dummy.net>
	<4DAC1F5D.5000305@ruza.eu>
	<20110418120007.GB2254@localhost.dummy.net>
	<452200.29220.qm@web111502.mail.gq1.yahoo.com>
	<20110418180645.GA13607@localhost.dummy.net>
	<20110418174913.GG3258@machine.or.cz>
Message-ID: <20110418183737.GA13889@localhost.dummy.net>



 
> Zkus si pokecat s lidmi kolem edubrmu (asi zejmena sargonem), edubrm je
> take postaveny na ARMu. Treba by slo spojit sily. :-)


Zbezne jsem se podival na edubrm a mam dojem ze me asi nebudou potrebovat,
pouzivaji novejsi ARM nekompatibilni s tim mym, takze jim asi moc nepomuzu.



From vit.fargas at gmail.com  Mon Apr 18 20:45:36 2011
From: vit.fargas at gmail.com (=?UTF-8?B?VsOtdCBGYXJnYcWh?=)
Date: Mon, 18 Apr 2011 20:45:36 +0200
Subject: [Brmlab] =?utf-8?q?Sl=C3=ADben=C3=BD_mail_o_psech!?=
In-Reply-To: <560540.35184.qm@web111501.mail.gq1.yahoo.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>
	<BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>
	<20110418130324.GB3258@machine.or.cz>
	<BANLkTimjsq_hQwZ+1owH=Aui7Mhho8HboA@mail.gmail.com>
	<4DAC39DF.70003@ruza.eu>
	<C6652D96-B96C-43C7-B3AC-0D9C1328E886@gmail.com>
	<560540.35184.qm@web111501.mail.gq1.yahoo.com>
Message-ID: <BANLkTi=Nj3kTsYBnBNd5LroLDY2_V=OmQA@mail.gmail.com>

Ak sa smiem k tomu vyjadrit aj ako neclen, tak k prezentacii zakazu/zakazov:

Ja navrhujem jednoduchy a ucinny piktogram... a nic viac. A mozno
popremyslat aj nad inymi (aj pozitivnymi :) ) graficky jednotnymi
piktogramami.


Nie ze by som nemal zmysel pre humor, ale vo vseobecnosti som proti nejakym
zbytocne vtipnym a vysvetlujucim zakazom:

a) nikto nema chut ked dojde k dveram citat nejake absolutne zbytocne dlhe
suvetia. ... Z ktorych 95 percent sa ho ani netyka. A ktorych sa tam casom
zacne nebodaj este hromadit. Hlavne pri nejakej vacsej akcii si ani neviem
prestavit, ze by vsetci pozorne citali vsetko co tam je...

b) prikazy a zakazy su strohe preto lebo je to efektivne. Ich ulohou nie je
ani vysvetlovat preco, ani nasledky ak ich porusis, ale aby ti do 3 sekund
bolo jasne co smies a co nie. Ak to niekoho zaujima preco a co sa stane,
najde si tlstu knizku s predpismi, kde su tie veci vysvetlene. Nie som proti
vtipnej knizke nejakych zakladnych pravidiel a zakazov (napr. na webe), ale
ak je zmyslom zakazat vec, tak nac ta omacka okolo? Ak je vec zakaz, tak to
nema vyzerat ako oznam. A ak to vyzera ako vtip, tak to nemusi byt brane
seriozne.

c) vtipna je vec (ktorej zmyslom je nieco ine), ak signal to noise ratio je
minimalne nad 1 (vobec najlepsie aspon nad 9) . Co napriklad v pripade
piktogramov nie je problem (preto ich mam rad -  ak mate viac
vtipnych/zbytocnych piktogramov ako informativnych, definitvne je cas sa nad
sebou zamysliet :) ), v pripade textu ten pomer neskutocne nizky a slabo
kontrolovatelny - signal: "Zakaz psov" (2 slova) signal s noise: "Nech?vejte
psy venku nebo z nich nad?l?me vzorky pro biolab" (10 slov)...

Tolko aspon moja mienka k prezentacii zakazov (vseobecne)..

VeeTee


2011/4/18 Frantisek Apfelbeck <algoldor at yahoo.com>

> A co takhle neco ve stylu jiz proflaknute klasiky?
>
> http://sranda.kdecoje.cz/srandovni_obrazky/i904-Kockonos.html
>
>
>
>
> ----- Original Message ----
> From: Jakub <jakub.hybler at gmail.com>
> To: Brmlab: Hackerspace Prague (main discussion) <brmlab at brmlab.cz>
> Sent: Mon, April 18, 2011 3:31:29 PM
> Subject: Re: [Brmlab] Sl?ben? mail o psech!
>
> co takovy komix strip s pribehem ??
>
> Jjh
>
> On 18.4.2011, at 15:17, Pavel Ruzicka <ruza at ruza.eu> wrote:
>
> > nejlepsi pojeti takoveho varovani/doporuceni mi prijde ne ze psi v
> > brmlabu zakazujeme z nejakych antipatii apod, nybrz ze prostory brmlabu
> > pro ne povazujeme za prilis nebezpecne prostredi a chceme tak predejit
> > pripadnym neprijemnostem.
> >
> > ruza
> >
> > On 04/18/2011 03:07 PM, Radka Haneckova wrote:
> >> Ja policajtovat rozhodne nemienim. Psov sa bojim ale napriek tomu som
> >> sa neodhodlala upozornit ziadneho z majitelov na nevitanost jeho
> >> stvronoheho pokladu kedze sa mi nechcelo zaujat rolu hnusnej zlej tety
> >> co nenavidi zvieratka...
> >> oznam nemusi byt strohy ani prisny, mohlo by to byt nieco vesele a
> >> rada to vytvorim :) ten napad s predlzovackami sa mi paci :D
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110418/dfbb7f8c/attachment.html>

From vitezslav.zak at mindstore.cz  Mon Apr 18 21:56:44 2011
From: vitezslav.zak at mindstore.cz (Vitezslav.Zak)
Date: Mon, 18 Apr 2011 21:56:44 +0200
Subject: [Brmlab] =?utf-8?q?Sl=C3=ADben=C3=BD_mail_o_psech!?=
In-Reply-To: <BANLkTi=Nj3kTsYBnBNd5LroLDY2_V=OmQA@mail.gmail.com>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>	<BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>	<20110418130324.GB3258@machine.or.cz>	<BANLkTimjsq_hQwZ+1owH=Aui7Mhho8HboA@mail.gmail.com>	<4DAC39DF.70003@ruza.eu>	<C6652D96-B96C-43C7-B3AC-0D9C1328E886@gmail.com>	<560540.35184.qm@web111501.mail.gq1.yahoo.com>
	<BANLkTi=Nj3kTsYBnBNd5LroLDY2_V=OmQA@mail.gmail.com>
Message-ID: <4DAC977C.4010700@mindstore.cz>

souhlas s myslenkou jednoduchosti.
http://photos.demandstudios.com/61/38/fotolia_752795_XS.jpg
v.




On 18.4.2011 20:45, V?t Farga? wrote:
> Ak sa smiem k tomu vyjadrit aj ako neclen, tak k prezentacii 
> zakazu/zakazov:
>
> Ja navrhujem jednoduchy a ucinny piktogram... a nic viac. A mozno 
> popremyslat aj nad inymi (aj pozitivnymi :) ) graficky jednotnymi 
> piktogramami.
>
>
> Nie ze by som nemal zmysel pre humor, ale vo vseobecnosti som proti 
> nejakym zbytocne vtipnym a vysvetlujucim zakazom:
>
> a) nikto nema chut ked dojde k dveram citat nejake absolutne zbytocne 
> dlhe suvetia. ... Z ktorych 95 percent sa ho ani netyka. A ktorych sa 
> tam casom zacne nebodaj este hromadit. Hlavne pri nejakej vacsej akcii 
> si ani neviem prestavit, ze by vsetci pozorne citali vsetko co tam je...
>
> b) prikazy a zakazy su strohe preto lebo je to efektivne. Ich ulohou 
> nie je ani vysvetlovat preco, ani nasledky ak ich porusis, ale aby ti 
> do 3 sekund bolo jasne co smies a co nie. Ak to niekoho zaujima preco 
> a co sa stane, najde si tlstu knizku s predpismi, kde su tie veci 
> vysvetlene. Nie som proti vtipnej knizke nejakych zakladnych pravidiel 
> a zakazov (napr. na webe), ale ak je zmyslom zakazat vec, tak nac ta 
> omacka okolo? Ak je vec zakaz, tak to nema vyzerat ako oznam. A ak to 
> vyzera ako vtip, tak to nemusi byt brane seriozne.
>
> c) vtipna je vec (ktorej zmyslom je nieco ine), ak signal to noise 
> ratio je minimalne nad 1 (vobec najlepsie aspon nad 9) . Co napriklad 
> v pripade piktogramov nie je problem (preto ich mam rad -  ak mate 
> viac vtipnych/zbytocnych piktogramov ako informativnych, definitvne je 
> cas sa nad sebou zamysliet :) ), v pripade textu ten pomer neskutocne 
> nizky a slabo kontrolovatelny - signal: "Zakaz psov" (2 slova) signal 
> s noise: "Nech?vejte psy venku nebo z nich nad?l?me vzorky pro biolab" 
> (10 slov)...
>
> Tolko aspon moja mienka k prezentacii zakazov (vseobecne)..
>
> VeeTee
>
>
> 2011/4/18 Frantisek Apfelbeck <algoldor at yahoo.com 
> <mailto:algoldor at yahoo.com>>
>
>     A co takhle neco ve stylu jiz proflaknute klasiky?
>
>     http://sranda.kdecoje.cz/srandovni_obrazky/i904-Kockonos.html
>
>
>
>
>     ----- Original Message ----
>     From: Jakub <jakub.hybler at gmail.com <mailto:jakub.hybler at gmail.com>>
>     To: Brmlab: Hackerspace Prague (main discussion) <brmlab at brmlab.cz
>     <mailto:brmlab at brmlab.cz>>
>     Sent: Mon, April 18, 2011 3:31:29 PM
>     Subject: Re: [Brmlab] Sl?ben? mail o psech!
>
>     co takovy komix strip s pribehem ??
>
>     Jjh
>
>     On 18.4.2011, at 15:17, Pavel Ruzicka <ruza at ruza.eu
>     <mailto:ruza at ruza.eu>> wrote:
>
>     > nejlepsi pojeti takoveho varovani/doporuceni mi prijde ne ze psi v
>     > brmlabu zakazujeme z nejakych antipatii apod, nybrz ze prostory
>     brmlabu
>     > pro ne povazujeme za prilis nebezpecne prostredi a chceme tak
>     predejit
>     > pripadnym neprijemnostem.
>     >
>     > ruza
>     >
>     > On 04/18/2011 03:07 PM, Radka Haneckova wrote:
>     >> Ja policajtovat rozhodne nemienim. Psov sa bojim ale napriek
>     tomu som
>     >> sa neodhodlala upozornit ziadneho z majitelov na nevitanost jeho
>     >> stvronoheho pokladu kedze sa mi nechcelo zaujat rolu hnusnej
>     zlej tety
>     >> co nenavidi zvieratka...
>     >> oznam nemusi byt strohy ani prisny, mohlo by to byt nieco vesele a
>     >> rada to vytvorim :) ten napad s predlzovackami sa mi paci :D
>     > _______________________________________________
>     > Brmlab mailing list
>     > Brmlab at brmlab.cz <mailto:Brmlab at brmlab.cz>
>     > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>     _______________________________________________
>     Brmlab mailing list
>     Brmlab at brmlab.cz <mailto:Brmlab at brmlab.cz>
>     http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>     _______________________________________________
>     Brmlab mailing list
>     Brmlab at brmlab.cz <mailto:Brmlab at brmlab.cz>
>     http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110418/17f5d653/attachment.html>

From sargonout at gmail.com  Mon Apr 18 22:08:51 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Mon, 18 Apr 2011 22:08:51 +0200
Subject: [Brmlab] =?iso-8859-1?q?Sl=EDben=FD_mail_o_psech!?=
In-Reply-To: <4DAC977C.4010700@mindstore.cz>
References: <BANLkTimiX87a1T00Q3i3avQKLEJeWnpx-A@mail.gmail.com>
	<BANLkTino_jcmv=sF_dZokS+fCBEU4-jAAg@mail.gmail.com>
	<BANLkTi=+Os5Nht+k=EeSewczz5c6Zjo0Bw@mail.gmail.com>
	<20110418130324.GB3258@machine.or.cz>
	<BANLkTimjsq_hQwZ+1owH=Aui7Mhho8HboA@mail.gmail.com>
	<4DAC39DF.70003@ruza.eu>
	<C6652D96-B96C-43C7-B3AC-0D9C1328E886@gmail.com>
	<560540.35184.qm@web111501.mail.gq1.yahoo.com>
	<BANLkTi=Nj3kTsYBnBNd5LroLDY2_V=OmQA@mail.gmail.com>
	<4DAC977C.4010700@mindstore.cz>
Message-ID: <BANLkTik+kZHnah0jCNv+AoHH_NbVNgaXhw@mail.gmail.com>

http://www.dula.tv/blog/wp-content/uploads/2009/08/dog-skating-fuck.jpg

co mi pripomenulo ...



2011/4/18 Vitezslav.Zak <vitezslav.zak at mindstore.cz>

>  souhlas s myslenkou jednoduchosti.
> http://photos.demandstudios.com/61/38/fotolia_752795_XS.jpg
> v.
>
>
>
>
>
> On 18.4.2011 20:45, V?t Farga? wrote:
>
> Ak sa smiem k tomu vyjadrit aj ako neclen, tak k prezentacii
> zakazu/zakazov:
>
>  Ja navrhujem jednoduchy a ucinny piktogram... a nic viac. A mozno
> popremyslat aj nad inymi (aj pozitivnymi :) ) graficky jednotnymi
> piktogramami.
>
>
>  Nie ze by som nemal zmysel pre humor, ale vo vseobecnosti som proti
> nejakym zbytocne vtipnym a vysvetlujucim zakazom:
>
>  a) nikto nema chut ked dojde k dveram citat nejake absolutne zbytocne
> dlhe suvetia. ... Z ktorych 95 percent sa ho ani netyka. A ktorych sa tam
> casom zacne nebodaj este hromadit. Hlavne pri nejakej vacsej akcii si ani
> neviem prestavit, ze by vsetci pozorne citali vsetko co tam je...
>
>  b) prikazy a zakazy su strohe preto lebo je to efektivne. Ich ulohou nie
> je ani vysvetlovat preco, ani nasledky ak ich porusis, ale aby ti do 3
> sekund bolo jasne co smies a co nie. Ak to niekoho zaujima preco a co sa
> stane, najde si tlstu knizku s predpismi, kde su tie veci vysvetlene. Nie
> som proti vtipnej knizke nejakych zakladnych pravidiel a zakazov (napr. na
> webe), ale ak je zmyslom zakazat vec, tak nac ta omacka okolo? Ak je vec
> zakaz, tak to nema vyzerat ako oznam. A ak to vyzera ako vtip, tak to nemusi
> byt brane seriozne.
>
>  c) vtipna je vec (ktorej zmyslom je nieco ine), ak signal to noise ratio
> je minimalne nad 1 (vobec najlepsie aspon nad 9) . Co napriklad v pripade
> piktogramov nie je problem (preto ich mam rad -  ak mate viac
> vtipnych/zbytocnych piktogramov ako informativnych, definitvne je cas sa nad
> sebou zamysliet :) ), v pripade textu ten pomer neskutocne nizky a slabo
> kontrolovatelny - signal: "Zakaz psov" (2 slova) signal s noise: "Nech?vejte
> psy venku nebo z nich nad?l?me vzorky pro biolab" (10 slov)...
>
>  Tolko aspon moja mienka k prezentacii zakazov (vseobecne)..
>
>  VeeTee
>
>
>  2011/4/18 Frantisek Apfelbeck <algoldor at yahoo.com>
>
>> A co takhle neco ve stylu jiz proflaknute klasiky?
>>
>> http://sranda.kdecoje.cz/srandovni_obrazky/i904-Kockonos.html
>>
>>
>>
>>
>> ----- Original Message ----
>> From: Jakub <jakub.hybler at gmail.com>
>> To: Brmlab: Hackerspace Prague (main discussion) <brmlab at brmlab.cz>
>> Sent: Mon, April 18, 2011 3:31:29 PM
>> Subject: Re: [Brmlab] Sl?ben? mail o psech!
>>
>> co takovy komix strip s pribehem ??
>>
>> Jjh
>>
>> On 18.4.2011, at 15:17, Pavel Ruzicka <ruza at ruza.eu> wrote:
>>
>> > nejlepsi pojeti takoveho varovani/doporuceni mi prijde ne ze psi v
>> > brmlabu zakazujeme z nejakych antipatii apod, nybrz ze prostory brmlabu
>> > pro ne povazujeme za prilis nebezpecne prostredi a chceme tak predejit
>> > pripadnym neprijemnostem.
>> >
>> > ruza
>> >
>> > On 04/18/2011 03:07 PM, Radka Haneckova wrote:
>> >> Ja policajtovat rozhodne nemienim. Psov sa bojim ale napriek tomu som
>> >> sa neodhodlala upozornit ziadneho z majitelov na nevitanost jeho
>> >> stvronoheho pokladu kedze sa mi nechcelo zaujat rolu hnusnej zlej tety
>> >> co nenavidi zvieratka...
>> >> oznam nemusi byt strohy ani prisny, mohlo by to byt nieco vesele a
>> >> rada to vytvorim :) ten napad s predlzovackami sa mi paci :D
>> > _______________________________________________
>> > Brmlab mailing list
>> > Brmlab at brmlab.cz
>> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
>
>
> _______________________________________________
> Brmlab mailing listBrmlab at brmlab.czhttp://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110418/80ea705c/attachment.html>

From algoldor at yahoo.com  Tue Apr 19 14:26:13 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Tue, 19 Apr 2011 05:26:13 -0700 (PDT)
Subject: [Brmlab] maly workshop na fermenty v Brmlabu ve stredu 20/4 vecer?
Message-ID: <923378.87353.qm@web111501.mail.gq1.yahoo.com>

Zdravim ve spolek,
Pokud by mel nekdo zajem, tak muzu ve stredu vecer udelat mensi workshop na 
fermenty. Chtel bych to udelat v Brmlabu, tak doufam, ze by se to s necim 
nekrylo. Pocitam s tim, ze to bude spise mensi zalezitost, par lidi, takze jeden 
stul by mel stacit. Co takhle po 19:00? Mam novou kulturu granos tibicos = 
krystaly vodniho kefiru. Fermentace budou anaerobni, zapachu se tedy vyhnem, 
takze dejte prosim vedet, zda je to OK, ja tam budu rozhodne.

S pozdravem,

Frantisek

PS Uploadoval jsem nekolik manualu na tastebridge wiki, jsou tam anglicke verze 
(je nutno jeste udelat korekce), ceske muzu poslat take

https://www.noisebridge.net/wiki/Recipes_and_Manuals



From ruza at ruza.eu  Tue Apr 19 23:32:54 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Tue, 19 Apr 2011 23:32:54 +0200
Subject: [Brmlab] peg board
Message-ID: <4DADFF86.6030408@ruza.eu>

co takhle poridit do brmlabu tzv. peg board, tj derovanou desku na
naradi aby se nevalelo vsude mozne? Nemate nekdo nejaky nevyuzity, ktery
chcete venovat k uzivani?

http://www.kwesto.cz/shop/product/M10823/D%C4%9Brovan%C3%A1+deska+na+n%C3%A1%C5%99ad%C3%AD.html

http://www.kaiserkraft.cz/shop/product/M7018/D%C4%9Brovan%C3%A1+deska+z+ocelov%C3%A9ho+plechu+1%2C25+mm.html

ruza
-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz


From niekt0 at hysteria.sk  Wed Apr 20 01:58:35 2011
From: niekt0 at hysteria.sk (niekt0)
Date: Wed, 20 Apr 2011 01:58:35 +0200
Subject: [Brmlab] Rep-rap
Message-ID: <BANLkTikfen3-aLeNf2n8Vd=2=goDmSQ8Zw@mail.gmail.com>

Zdar,

vydedikovali sme ondrov komp na rep-rap.
Je tam teraz hodeny na stole, nainstalovane ciste bubuntu.

Treba tam este rozbehnut tie rep-rap veci,
a mozeme tlacit 24/7.

Znarodnili sme pri tom monitor klavesnicu a mys, casom nahradime.

n.


From algoldor at yahoo.com  Wed Apr 20 07:07:37 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Tue, 19 Apr 2011 22:07:37 -0700 (PDT)
Subject: [Brmlab] peg board
In-Reply-To: <4DADFF86.6030408@ruza.eu>
References: <4DADFF86.6030408@ruza.eu>
Message-ID: <513417.2454.qm@web111510.mail.gq1.yahoo.com>

Myslim, ze to je vyborny napad. Jestli muzu doporucit az se sezene, nainstalujte 
veci tak jak se Vam raci a pak je obtahnete nejakym fixem at jsou "pevne" 
zaneseny na desce, je mnohem jednoduzsi je pak vracet na spravne misto.

Ahoj Frantisek




----- Original Message ----
From: Pavel Ruzicka <ruza at ruza.eu>
To: Prague hackerspace <brmlab at brmlab.cz>
Sent: Tue, April 19, 2011 10:32:54 PM
Subject: [Brmlab] peg board

co takhle poridit do brmlabu tzv. peg board, tj derovanou desku na
naradi aby se nevalelo vsude mozne? Nemate nekdo nejaky nevyuzity, ktery
chcete venovat k uzivani?

http://www.kwesto.cz/shop/product/M10823/D%C4%9Brovan%C3%A1+deska+na+n%C3%A1%C5%99ad%C3%AD.html


http://www.kaiserkraft.cz/shop/product/M7018/D%C4%9Brovan%C3%A1+deska+z+ocelov%C3%A9ho+plechu+1%2C25+mm.html


ruza
-- 
e-mail:  ruza at ruza.eu
www:   http://ruza.eu
     http://brmlab.cz
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From algoldor at yahoo.com  Wed Apr 20 09:03:21 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Wed, 20 Apr 2011 00:03:21 -0700 (PDT)
Subject: [Brmlab] odpoledne nekdo v Brmlabu? fermentace posunuty na
	17:00-18:40 (dnes)
Message-ID: <281864.83333.qm@web111512.mail.gq1.yahoo.com>

Opet zdravim,
Chci se zeptat, zda dnes bude nekdo odpoledne v Brmlabu? Rad bych se stavil. 
Pokud by nekdo chtel delat na arduinu, webovkach ci diagnostiku dvou laptopu co 
davam dohromady pro Stredni Ameriku, tak mi dejte prosim vedet. Fermentace 
probehnou drive nez planovano a to mezi 17:00 - 18:40, mam vecer akci.

Budu se tesit,

Ahoj Frantisek


From pasky at ucw.cz  Wed Apr 20 09:19:49 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Wed, 20 Apr 2011 09:19:49 +0200
Subject: [Brmlab] odpoledne nekdo v Brmlabu? fermentace posunuty na
 17:00-18:40 (dnes)
In-Reply-To: <281864.83333.qm@web111512.mail.gq1.yahoo.com>
References: <281864.83333.qm@web111512.mail.gq1.yahoo.com>
Message-ID: <20110420071949.GZ3258@machine.or.cz>

  Ahoj!

On Wed, Apr 20, 2011 at 12:03:21AM -0700, Frantisek Apfelbeck wrote:
> Chci se zeptat, zda dnes bude nekdo odpoledne v Brmlabu? Rad bych se stavil. 
> Pokud by nekdo chtel delat na arduinu, webovkach ci diagnostiku dvou laptopu co 
> davam dohromady pro Stredni Ameriku, tak mi dejte prosim vedet. Fermentace 
> probehnou drive nez planovano a to mezi 17:00 - 18:40, mam vecer akci.

  Ja tam budu, ale bohuzel na fermentace cas mit nebudu. Jinak rad
poradim s jednotlivostma, ale nejak soustavne se necemu z toho venovat
asi nebudu moci.

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From algoldor at yahoo.com  Wed Apr 20 09:33:50 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Wed, 20 Apr 2011 00:33:50 -0700 (PDT)
Subject: [Brmlab] jak vytvorit social network - propojeni Cechy x Stredni
	Amerika
Message-ID: <125056.65948.qm@web111510.mail.gq1.yahoo.com>

A opet ja, to se ted bude stavat asi casteji ...

Jsem dlouhodobe aktivni ve Stredni Americe, specialni na Kube a v Mexiku. Mam 
ted dve priority, hlavne v ramci Kuby se kterymi bych potreboval pomoci:

1) rad bych vylepsil informovanost o situaci na Kube v ramci Ceske Republiky
2) chtel bych shromazdovat potrebne vybaveni v CR a posilat je na Kubu (legalne) 
nasim partnerum

1) chci psat na dana temata do Venceremos coz je papirovy obcasnik zamereny na 
Kubu a Stredni Ameriku levicoveho charakteru

http://www.sckp-cheb.cz/ctvrtletnik-venceremos

a premyslim, jake internetove portaly by se daly vyuzit v ramci CR pro propagaci 
daneho tematu, napadaji me

http://www.denikreferendum.cz/

http://blog.hedvabnastezka.cz/

http://www.sckpkarvina.estranky.cz/


2) tohle je orisek. Chtel bych vytvorit social network, ktera by shromazdovala 
vybaveni, prechovavala je a pak "dostala" na Kubu. Jedna se hlavne o 
multimedialni vybaveni typu pocitace, data projektory, fotaky atd. Moznosti 
posilat veci na Kubu jsou velmi omezene (cena a legalita), proto je myslim treba 
posilat vybaveni s lidmi, kteri na Kubu jedou at za turistickymi ci jinymi 
ucely. Vse je treba udelat ciste a legalne, coz neni nejjednoduzsi ale lze. S 
cim bych potreboval pomoct je, jak a kde vytvorit online socialni sit, ktera by 
zkratka byla pristupna a sexi a umoznovala by vyse uvedeny vyber vybaveni, 
uschovani a oficialni poslani na Kubu, kdyz tam nekdo ochotny jede. Verim, ze se 
mi podari najit podporu tohoto projektu v ramci Spolecnosti Cesko-Kubanskeho 
pratelstvi, ktereho jsem clenem, ale je nutne si uvedomit, ze rada clenu 
nepracuje s internetem priliz intenzivne (starsi garda), takze dana reseni musi 
byt pomerne jednoducha a zapojeni mobilu bude myslim si nutne.

Mam cca tri tydny na tom trochu zapracovat, rad bych vytvoril alespon koncepcni 
zaklad a doufal, ze nekdo pak pomuze s udrzbou a administrativou. Jednim z kroku 
je oficialni setkani s kubanskym ambasadorem v Praze se kterym jsem na dane tema 
vcera neoficialne kratce mluvil, protoze status vsech spratelenych organizaci na 
obou  stranach musi byt peclive overen, coz bych rad provedl alespon jako mustr 
pro dve co znam - Solecnost Cesko-Kubanskeho Pratelstvi (Cesky zavedeny partner, 
nebude problem) a jiz drive spolupracujici La Asociaci?n de Aficionado a la 
Botanica y Protecci?n de la Naturaleza Juan Tom?s Roig (Asociace pratel botaniky 
a ochrany prirody Juan Tomas Roig) zde je predchozi projekt 
http://frantisekapfelbeck.org/tiki_wiki/tiki-index.php?page=Proyecto+Placetas

Budu se tesit na tipy,

S pozdravem,

Frantisek 


From pasky at ucw.cz  Wed Apr 20 09:47:44 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Wed, 20 Apr 2011 09:47:44 +0200
Subject: [Brmlab] jak vytvorit social network - propojeni Cechy x
 Stredni Amerika
In-Reply-To: <125056.65948.qm@web111510.mail.gq1.yahoo.com>
References: <125056.65948.qm@web111510.mail.gq1.yahoo.com>
Message-ID: <20110420074744.GD3258@machine.or.cz>

  Ahoj!

On Wed, Apr 20, 2011 at 12:33:50AM -0700, Frantisek Apfelbeck wrote:
> 1) chci psat na dana temata do Venceremos coz je papirovy obcasnik zamereny na 
> Kubu a Stredni Ameriku levicoveho charakteru
> 
> http://www.sckp-cheb.cz/ctvrtletnik-venceremos
> 
> a premyslim, jake internetove portaly by se daly vyuzit v ramci CR pro propagaci 
> daneho tematu, napadaji me
> 
> http://www.denikreferendum.cz/
> 
> http://blog.hedvabnastezka.cz/
> 
> http://www.sckpkarvina.estranky.cz/

  Rekl bych, ze nejlepsi pomer usili / medialni impact maji blogy
velkych ceskych internetovych deniku, asi nejspis blog.idnes.cz.
Pokud napises neco pekneho, mas mozna i velkou sanci se dostat do
"vyberu", ktery se bude zobrazovat nekolika set tisicum ctenaru
denne u kazdeho clanku.

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From chidori at emptytriangle.com  Wed Apr 20 10:03:03 2011
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Wed, 20 Apr 2011 10:03:03 +0200
Subject: [Brmlab] odpoledne nekdo v Brmlabu? fermentace posunuty na
 17:00-18:40 (dnes)
In-Reply-To: <20110420071949.GZ3258@machine.or.cz>
References: <281864.83333.qm@web111512.mail.gq1.yahoo.com>
	<20110420071949.GZ3258@machine.or.cz>
Message-ID: <BANLkTinRuCDm7S=JMFnAe-5vUmxV6dYsYQ@mail.gmail.com>

Ahoj,
Upozornujem ze dnes je v brmlabe od 14:00 do 17:00 biologicky kruzok
http://brmlab.cz/event/biokrouzek - takze bude obsadena horna
miestnost kedze potrebujeme studijni klid :) Ale budem tam od 14:00
takze ta budem moct pustit dnu.

chido

2011/4/20 Petr Baudis <pasky at ucw.cz>:
> ?Ahoj!
>
> On Wed, Apr 20, 2011 at 12:03:21AM -0700, Frantisek Apfelbeck wrote:
>> Chci se zeptat, zda dnes bude nekdo odpoledne v Brmlabu? Rad bych se stavil.
>> Pokud by nekdo chtel delat na arduinu, webovkach ci diagnostiku dvou laptopu co
>> davam dohromady pro Stredni Ameriku, tak mi dejte prosim vedet. Fermentace
>> probehnou drive nez planovano a to mezi 17:00 - 18:40, mam vecer akci.
>
> ?Ja tam budu, ale bohuzel na fermentace cas mit nebudu. Jinak rad
> poradim s jednotlivostma, ale nejak soustavne se necemu z toho venovat
> asi nebudu moci.
>
> --
> ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?Petr "Pasky" Baudis
> UNIX is user friendly, it's just picky about who its friends are.
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>



-- 
"It is not birth, marriage, or death, but gastrulation which is truly
the most important time in your life."? ? Lewis Wolpert


From pasky at ucw.cz  Wed Apr 20 16:50:38 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Wed, 20 Apr 2011 16:50:38 +0200
Subject: [Brmlab] Zavirani dveri
Message-ID: <20110420145038.GF3258@machine.or.cz>

  Mili brmlabaci!

  Dnes mezi ranem a odpolednem byly dvere do brmlabu otevrene, i kdyz
tu nikdo nebyl. Experimentalne jsme overili, ze kdyz se dvere prudce
zabouchnou, odrazi se od ramu a nezapadnou, pravdepodobne situace
vznikla takto. Proto prosim dvere na odchodu nezabouchavejte, ale vzdy
zavrete zmacknutim kliky a zkontrolujte, ze je zamceno.

  A kdyz uz budete odchazet takhle opatrne, jiste take nezapomenete
prepnout status switch. ;-)

  Happy hacking,

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From tomas at mudrunka.cz  Wed Apr 20 17:38:13 2011
From: tomas at mudrunka.cz (=?UTF-8?Q?Tom=C3=A1=C5=A1_Mudru=C5=88ka?=)
Date: Wed, 20 Apr 2011 17:38:13 +0200
Subject: [Brmlab] Fwd: Re: pridelovani IPv6
Message-ID: <829487c1bebc8ab552acdb035d853c47@harvie.cz>


-------- Original Message --------
Subject: Re: pridelovani IPv6
Date: Wed, 20 Apr 2011 12:58:01 +0200
From: Petr Solna? - Spoje.NET <solnar at spoje.net>
To: Tom?? Mudru?ka <tomas at mudrunka.cz>

Cau,

na Brevnove zacneme nasazovat IPv6 v druhe pulce kvetna - tedka mam na
stole fakturu od RIPE kterou musime nejdriv zaplatit a pocitam ze tedy
zacatkem kvetna bude rozsah aktivni. Dale budu muset vyjednat peering
zatim na urovni czfree po ipv6 a posleze zacneme rozjidet na routerech
OSPFv6, ktery bude zajistovat routing a pridelovani dynamickych adres.
Staticke rozsahy pak budeme routovat klasicky pres zebru vzdy na
poslednim ospf routeru pred zakaznikem.

Na strane zakaznika je potom treba router s podporou IPv6, predpokladam
ze to v brmlabu nebude problem.

Samotne nastaveni OSPFv6 nebude takovej problem - vsechny routery co
jsem instaloval podporu uz maji, takze jakmile rozjedeme peering tak
bych to videl ze zacatkem cervna by mohlo bejt zkusebni pripojeni
funkcni pro lidi co si o nej reknou.

P.

On Wed, 20 Apr 2011 03:09:49 +0200, Tom?? Mudru?ka <tomas at mudrunka.cz>
wrote:
> Cau,
> hele v brmlabu vcera projevili zajem o IPv6 rozsah a pri te prilezitosti
> bys me moh naucit jak to udelat. idealne sepsat na wiki nejaky seznam
kroku
> co vsechno se musi zkontrolovat a kde to povolit. pocitam ze prometheus
to
> sam este neumi...

-- 
Petr Solna?
solnar at spoje.net

Spoje.net s.r.o.
Z?v?rka 8 
169 00  Praha 6
+420.603872631
+420.245009312

-- 
S pozdravem
Best regards
   Tom?? Mudru?ka - Spoje.net / Arachne Labs

XMPP/Jabber: harvie at jabbim.cz, ICQ: 283782978


From blackhead at blackhead.cz  Wed Apr 20 22:54:18 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Wed, 20 Apr 2011 22:54:18 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <BNEBJCHIKOICJLAPBAPHCENIDLAA.blackhead@blackhead.cz>
Message-ID: <BNEBJCHIKOICJLAPBAPHGEOEDLAA.blackhead@blackhead.cz>

2 Stick: tak jsem si to spocital, dela to 515,- Kc + asi taky podil z
postovneho, ne?

Diky.
BH


-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
George Blackhead
Sent: Wednesday, April 13, 2011 10:05 PM
To: Brmlab: Hackerspace Prague (main discussion)
Subject: Re: [Brmlab] Farnell nakup


Ahoj

Pokud neni pozde, tak prosim prihod:
3x 1852005 (3V 1.5A)
3x 1840843 (3V 1.5A)
6x 1834928 (10K serial 64steps)
2x 1834926 (50K serial 64steps)
4x 1863244 (microRGB LED)

Bude to za par set...

Zaplatim hotove, nebo poslu z uctu na ucet... podle potreby... ;-)

DIKY!

BH

-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf Of
Pavol Rusnak
Sent: Wednesday, April 13, 2011 3:30 PM
To: Prague hackerspace
Subject: [Brmlab] Farnell nakup


Ahoj!

Robime mega nakup z Farnellu, ak chcete nieco prihodit do kosika tak mi
do vecera napiste. Ak to budu drobnosti tak vam to mozno zoberieme
zadarmo, na vacsie veci dohodneme zlavu. Ale do vecera! :)

--
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From stick at gk2.sk  Wed Apr 20 22:58:34 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Wed, 20 Apr 2011 22:58:34 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <BNEBJCHIKOICJLAPBAPHGEOEDLAA.blackhead@blackhead.cz>
References: <BNEBJCHIKOICJLAPBAPHGEOEDLAA.blackhead@blackhead.cz>
Message-ID: <4DAF48FA.8000406@gk2.sk>

On 20/04/11 22:54, George Blackhead wrote:
> 2 Stick: tak jsem si to spocital, dela to 515,- Kc + asi taky podil z
> postovneho, ne?

Postovne neries. Zaokruhlime to na 500 a poriesime niekedy na meetupe.
Samozrejme suciastky si mozes zobrat skor ak chces, ale neviem kde ich
sargon dal, takze sa pripadne dohodni s nim.

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From sargonout at gmail.com  Thu Apr 21 08:15:27 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Thu, 21 Apr 2011 08:15:27 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <4DAF48FA.8000406@gk2.sk>
References: <BNEBJCHIKOICJLAPBAPHGEOEDLAA.blackhead@blackhead.cz>
	<4DAF48FA.8000406@gk2.sk>
Message-ID: <BANLkTin55PMHxFbqbMSM+TNiQ5WM91nD1g@mail.gmail.com>

@Black: suciastky su na parapete nad "mojim" stolom v takej bielej
ilegalitke hned vedla binarnych hodin :)

Sargon

2011/4/20 Pavol Rusnak <stick at gk2.sk>

> On 20/04/11 22:54, George Blackhead wrote:
> > 2 Stick: tak jsem si to spocital, dela to 515,- Kc + asi taky podil z
> > postovneho, ne?
>
> Postovne neries. Zaokruhlime to na 500 a poriesime niekedy na meetupe.
> Samozrejme suciastky si mozes zobrat skor ak chces, ale neviem kde ich
> sargon dal, takze sa pripadne dohodni s nim.
>
> --
> Best Regards / S pozdravom,
>
> Pavol Rusnak <stick at gk2.sk>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110421/ac767a91/attachment.html>

From pasky at ucw.cz  Thu Apr 21 16:31:59 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Thu, 21 Apr 2011 16:31:59 +0200
Subject: [Brmlab] Projekty
Message-ID: <20110421143159.GO3258@machine.or.cz>

  Ahoj!

  Udelal jsem trochu jarniho uklidu v projektove casti wiki - probral
jsem se aktivnimi projekty a ty z nich, na ktere zda se jenom seda
prach, jsem presunul dle stadia bud do stavu "done" nebo "suspended".
Motivaci mi je zejmena zprehledneni jiz notne rozrostleho seznamu
projektu.

  Jedna se o trochu vetsi hrst projektu, pokud jsem nekde spatne odhadl
situaci, doufam, ze jsem Vas moc nenastval a neodradil - presunte prosim
projekt zpatky, kam patri, a/nebo mi vynadejte. A take zvazte, jestli si
pri vsem hackovani nenajit jednou za par tydnu par minut casu i na
aktualizaci wiki (nebo o to nepoprosit grafomaniactejsiho kamarada). ;-)

  Happy editing,

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From algoldor at yahoo.com  Thu Apr 21 16:42:38 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Thu, 21 Apr 2011 07:42:38 -0700 (PDT)
Subject: [Brmlab] Projekty
In-Reply-To: <20110421143159.GO3258@machine.or.cz>
References: <20110421143159.GO3258@machine.or.cz>
Message-ID: <131630.23215.qm@web111502.mail.gq1.yahoo.com>

Ahoj Pasky,
Jsem v Brmlabu a mam cash. Stavis se? Nejsem si jist jak dlouho tady dnes budu, 
chtel bych vecer trochu odpocivat a studovat Japonstinu.

Ahoj Frantisek




----- Original Message ----
From: Petr Baudis <pasky at ucw.cz>
To: brmlab at brmlab.cz
Sent: Thu, April 21, 2011 3:31:59 PM
Subject: [Brmlab] Projekty

  Ahoj!

  Udelal jsem trochu jarniho uklidu v projektove casti wiki - probral
jsem se aktivnimi projekty a ty z nich, na ktere zda se jenom seda
prach, jsem presunul dle stadia bud do stavu "done" nebo "suspended".
Motivaci mi je zejmena zprehledneni jiz notne rozrostleho seznamu
projektu.

  Jedna se o trochu vetsi hrst projektu, pokud jsem nekde spatne odhadl
situaci, doufam, ze jsem Vas moc nenastval a neodradil - presunte prosim
projekt zpatky, kam patri, a/nebo mi vynadejte. A take zvazte, jestli si
pri vsem hackovani nenajit jednou za par tydnu par minut casu i na
aktualizaci wiki (nebo o to nepoprosit grafomaniactejsiho kamarada). ;-)

  Happy editing,

-- 
                Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From blackhead at blackhead.cz  Thu Apr 21 21:07:09 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Thu, 21 Apr 2011 21:07:09 +0200
Subject: [Brmlab] Farnell nakup
In-Reply-To: <BANLkTin55PMHxFbqbMSM+TNiQ5WM91nD1g@mail.gmail.com>
Message-ID: <BNEBJCHIKOICJLAPBAPHOEOFDLAA.blackhead@blackhead.cz>

Vdaka!
  -----Original Message-----
  From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
Of Tomislav Arnaudov
  Sent: Thursday, April 21, 2011 8:15 AM
  To: Brmlab: Hackerspace Prague (main discussion)
  Subject: Re: [Brmlab] Farnell nakup


  @Black: suciastky su na parapete nad "mojim" stolom v takej bielej
ilegalitke hned vedla binarnych hodin :)


  Sargon


  2011/4/20 Pavol Rusnak <stick at gk2.sk>

    On 20/04/11 22:54, George Blackhead wrote:
    > 2 Stick: tak jsem si to spocital, dela to 515,- Kc + asi taky podil z
    > postovneho, ne?


    Postovne neries. Zaokruhlime to na 500 a poriesime niekedy na meetupe.
    Samozrejme suciastky si mozes zobrat skor ak chces, ale neviem kde ich
    sargon dal, takze sa pripadne dohodni s nim.

    --

    Best Regards / S pozdravom,

    Pavol Rusnak <stick at gk2.sk>
    _______________________________________________
    Brmlab mailing list
    Brmlab at brmlab.cz
    http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110421/f3c8bd8d/attachment.html>

From niekt0 at hysteria.sk  Fri Apr 22 09:56:39 2011
From: niekt0 at hysteria.sk (niekt0)
Date: Fri, 22 Apr 2011 09:56:39 +0200
Subject: [Brmlab] reprap
Message-ID: <BANLkTinrw9iCJr8ddJhVBjNEHEkHB7QCMA@mail.gmail.com>

Zdar,

vcera som este skusal nieco vytlacit na reprape,
a vyzera ze je nieco s extruderom
(bud sa tam nepodava dobre plast, alebo je napol zacpaty, alebo neviem)
Kazdopadne skusil som vytlacit jednu suciastku, a po chvili som to stopol,
nakolko ten plast vychadzal iba obcas.

Potom som skusil to "vytlacene" umyt z heatbedu,
ale prilis mi to neslo, tak som to radsej nechal tak,
nech to nepokazim este viac.

Sorry,

n.


From axtheb at gmail.com  Fri Apr 22 11:36:21 2011
From: axtheb at gmail.com (Ax)
Date: Fri, 22 Apr 2011 11:36:21 +0200
Subject: [Brmlab] reprap
In-Reply-To: <BANLkTinrw9iCJr8ddJhVBjNEHEkHB7QCMA@mail.gmail.com>
References: <BANLkTinrw9iCJr8ddJhVBjNEHEkHB7QCMA@mail.gmail.com>
Message-ID: <BANLkTikEUUE07ky04iLkgZgM3rU2LEJRxA@mail.gmail.com>

2011/4/22 niekt0 <niekt0 at hysteria.sk>:
> Zdar,
>
> vcera som este skusal nieco vytlacit na reprape,
> a vyzera ze je nieco s extruderom
> (bud sa tam nepodava dobre plast, alebo je napol zacpaty, alebo neviem)
> Kazdopadne skusil som vytlacit jednu suciastku, a po chvili som to stopol,
> nakolko ten plast vychadzal iba obcas.

Kouknu na to, mozna tech 190 stupnu je malo, jiny zmeny sem tam
nedelal od posledniho tisku.

Ax


From algoldor at yahoo.com  Fri Apr 22 14:20:42 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Fri, 22 Apr 2011 05:20:42 -0700 (PDT)
Subject: [Brmlab] kontakt na pracovni agentury v Praze?
Message-ID: <33906.1656.qm@web111507.mail.gq1.yahoo.com>

Zdravim ve spolek,
Znate nejakou agenturu v Praze, ktera by nabizela kratkodobe prace/brigady? Vim, 
ze se to sem uplne nehodi, ale rozhodne by se nejake kontakty sikly.

Diky,

Frantisek



From chidori at emptytriangle.com  Fri Apr 22 14:35:56 2011
From: chidori at emptytriangle.com (Radka Haneckova)
Date: Fri, 22 Apr 2011 14:35:56 +0200
Subject: [Brmlab] kontakt na pracovni agentury v Praze?
In-Reply-To: <33906.1656.qm@web111507.mail.gq1.yahoo.com>
References: <33906.1656.qm@web111507.mail.gq1.yahoo.com>
Message-ID: <BANLkTikKyLzjMSejjWYeASGjZGu1w2LgZA@mail.gmail.com>

Mne by sa to zislo tiez :)

chido

2011/4/22 Frantisek Apfelbeck <algoldor at yahoo.com>:
> Zdravim ve spolek,
> Znate nejakou agenturu v Praze, ktera by nabizela kratkodobe prace/brigady? Vim,
> ze se to sem uplne nehodi, ale rozhodne by se nejake kontakty sikly.
>
> Diky,
>
> Frantisek
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>



-- 
"It is not birth, marriage, or death, but gastrulation which is truly
the most important time in your life."? ? Lewis Wolpert


From rainbof at gmail.com  Fri Apr 22 22:18:30 2011
From: rainbof at gmail.com (rainbof at gmail.com)
Date: Fri, 22 Apr 2011 20:18:30 +0000
Subject: [Brmlab] kontakt na pracovni agentury v Praze?
In-Reply-To: <BANLkTikKyLzjMSejjWYeASGjZGu1w2LgZA@mail.gmail.com>
Message-ID: <001517448778b94f2804a1878fd2@google.com>

myslim ?e jednou z nich ne index+ a pak nejak? b?vala kdysi na strahov?...

Dne u?ivatel Radka Haneckova <chidori at emptytriangle.com> napsal:
> Mne by sa to zislo tiez :)



> chido



> 2011/4/22 Frantisek Apfelbeck algoldor at yahoo.com>:

> > Zdravim ve spolek,

> > Znate nejakou agenturu v Praze, ktera by nabizela kratkodobe  
> prace/brigady? Vim,

> > ze se to sem uplne nehodi, ale rozhodne by se nejake kontakty sikly.

> >

> > Diky,

> >

> > Frantisek

> >

> > _______________________________________________

> > Brmlab mailing list

> > Brmlab at brmlab.cz

> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

> >







> --

> "It is not birth, marriage, or death, but gastrulation which is truly

> the most important time in your life." Lewis Wolpert

> _______________________________________________

> Brmlab mailing list

> Brmlab at brmlab.cz

> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110422/dbdefc8e/attachment.html>

From algoldor at yahoo.com  Sat Apr 23 11:32:57 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Sat, 23 Apr 2011 02:32:57 -0700 (PDT)
Subject: [Brmlab] quorum sensing - decision making process used by
	decentralized groups to coordinate behavior
Message-ID: <917200.3119.qm@web111510.mail.gq1.yahoo.com>

http://en.wikipedia.org/wiki/Quorum_sensing

This is coll! Check what the ants do at the end of the article :-)) little 
rascals ...

Frantisek



From algoldor at yahoo.com  Sat Apr 23 11:36:06 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Sat, 23 Apr 2011 02:36:06 -0700 (PDT)
Subject: [Brmlab] projekt - arduino ci laptop hardware dnes v brmlabu,
	odpoledne/vecer?
Message-ID: <698.54822.qm@web111507.mail.gq1.yahoo.com>

Zdravim,
Je nekdo dnes odpoledne ci vecer v Brmlabu? Chtel bych si hrat s Arduinem ci 
hardwarem u dvou laptopu co davam dohromady pro Stredni Ameriku. Pristupovou 
kartu do jamy lvove uz mam, ale nechce se mi tam dnes byt sam ...

S pozdravem,

Frantisek



From sargonout at gmail.com  Sat Apr 23 18:00:12 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Sat, 23 Apr 2011 18:00:12 +0200
Subject: [Brmlab] projekt - arduino ci laptop hardware dnes v brmlabu,
	odpoledne/vecer?
In-Reply-To: <698.54822.qm@web111507.mail.gq1.yahoo.com>
References: <698.54822.qm@web111507.mail.gq1.yahoo.com>
Message-ID: <BANLkTimE9F+p1xNKmGZzJOftSFOjF74sLQ@mail.gmail.com>

Nebudes tam sam ... bude tam particka okolo edubrm projektu
osobne ti rad pomozem ale tento tyzden sa riadim pravidlom edubrm first ;)

Sargon

Dne 23. dubna 2011 11:36 Frantisek Apfelbeck <algoldor at yahoo.com> napsal(a):

> Zdravim,
> Je nekdo dnes odpoledne ci vecer v Brmlabu? Chtel bych si hrat s Arduinem
> ci
> hardwarem u dvou laptopu co davam dohromady pro Stredni Ameriku.
> Pristupovou
> kartu do jamy lvove uz mam, ale nechce se mi tam dnes byt sam ...
>
> S pozdravem,
>
> Frantisek
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110423/46fa81b8/attachment.html>

From algoldor at yahoo.com  Sat Apr 23 18:21:24 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Sat, 23 Apr 2011 09:21:24 -0700 (PDT)
Subject: [Brmlab] projekt - arduino ci laptop hardware dnes v brmlabu,
	odpoledne/vecer?
In-Reply-To: <BANLkTimE9F+p1xNKmGZzJOftSFOjF74sLQ@mail.gmail.com>
References: <698.54822.qm@web111507.mail.gq1.yahoo.com>
	<BANLkTimE9F+p1xNKmGZzJOftSFOjF74sLQ@mail.gmail.com>
Message-ID: <809948.93175.qm@web111510.mail.gq1.yahoo.com>

Ahoj,
Uvidim jestli jeste dorazim, uz jsem rozjel "relaxacni rezim". To se u me stava 
v pravem smyslu slova jednou za uherak, tak se chci s timto fenomenem trosku 
"poskadlit". Zde je mimo jine moc hezky clanek, ktery vsem hacker workoholikum 
moc a moc doporucuji!

http://www.denikreferendum.cz/clanek/917-chvala-zapomenuteho-umeni-zahalky


S pozdravem vsem, 
Frantisek

PS Prave jsem se dodival na uplne uzasny film The Borrower Arrietty od Hiromasa 
Yonebayashi. Jsem opravdu unesen!

http://en.wikipedia.org/wiki/The_Borrower_Arrietty



________________________________
From: Tomislav Arnaudov <sargonout at gmail.com>
To: Brmlab: Hackerspace Prague (main discussion) <brmlab at brmlab.cz>
Sent: Sat, April 23, 2011 5:00:12 PM
Subject: Re: [Brmlab] projekt - arduino ci laptop hardware dnes v brmlabu, 
odpoledne/vecer?

Nebudes tam sam ... bude tam particka okolo edubrm projektu 
osobne ti rad pomozem ale tento tyzden sa riadim pravidlom edubrm first ;)

Sargon


Dne 23. dubna 2011 11:36 Frantisek Apfelbeck <algoldor at yahoo.com> napsal(a):

Zdravim,
>Je nekdo dnes odpoledne ci vecer v Brmlabu? Chtel bych si hrat s Arduinem ci
>hardwarem u dvou laptopu co davam dohromady pro Stredni Ameriku. Pristupovou
>kartu do jamy lvove uz mam, ale nechce se mi tam dnes byt sam ...
>
>S pozdravem,
>
>Frantisek
>
>_______________________________________________
>Brmlab mailing list
>Brmlab at brmlab.cz
>http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110423/7f9eec1e/attachment.html>

From pasky at ucw.cz  Sun Apr 24 14:05:40 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Sun, 24 Apr 2011 14:05:40 +0200
Subject: [Brmlab] Vchod do brmlabu
Message-ID: <20110424120540.GC3258@machine.or.cz>

  Ahoj!

  Na jiznim dvore (u brmlabu) se vjezdova brana zasekla v poloze
otevreno. To bohuzel znamena, ze vsechny vchody na dvur jsou uzamceny
a je nutne zvolit cestu bud spojovaci chodbou v prvnim patre, nebo
suterenem pod severnim dvorem. Prvni cesta je primocarejsi, ale cestou
musite pouzit OrcoKartu. Obe cesty jsou nepratelske vuci jizdnim kolum.
Predpokladany termin opravy vrat je utery.

  Happy sunny hacking,

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From me at tomasbrincil.cz  Sun Apr 24 14:11:13 2011
From: me at tomasbrincil.cz (=?UTF-8?B?VG9tw6HFoSBCxZlpbsSNaWw=?=)
Date: Sun, 24 Apr 2011 14:11:13 +0200
Subject: [Brmlab] =?utf-8?q?Pomoc_p=C5=99i_p=C3=A1jen=C3=AD_QFN_pouzdra_na?=
	=?utf-8?q?_DPS?=
Message-ID: <BANLkTim=KmbE0-f2ocQz0KjJpTNev1LPbw@mail.gmail.com>

Zdrav?m v?echny bastl??e s pevnou rukou a pot?ebn?m vybaven?m.
Na?el by se n?kdo kdo by mi v budoucnu mohl pomoct s nap?jen?m sou??stky v
QFN pouzd?e na desku plo?n?ch spoj??
Jde konkr?tn? o tuto sou??stku:
http://cz.farnell.com/jsp/search/productdetail.jsp?sku=1862383

D?kuji za reakce, Tom?? B?in?il
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110424/a53b8aa6/attachment.html>

From sargonout at gmail.com  Sun Apr 24 17:28:00 2011
From: sargonout at gmail.com (Tomislav Arnaudov)
Date: Sun, 24 Apr 2011 17:28:00 +0200
Subject: [Brmlab]
	=?iso-8859-2?q?Pomoc_p=F8i_p=E1jen=ED_QFN_pouzdra_na_DPS?=
In-Reply-To: <BANLkTim=KmbE0-f2ocQz0KjJpTNev1LPbw@mail.gmail.com>
References: <BANLkTim=KmbE0-f2ocQz0KjJpTNev1LPbw@mail.gmail.com>
Message-ID: <BANLkTik7woWJj=yFhcsXfUyEJ7E8k+hZug@mail.gmail.com>

Ahoj .. ja by som si na to trufol
akurat ma zaraza ta cena  ... dufam ze nebudes pozadovat nejake odskodne ked
sa to nepodari

ja som pajkoval uz niekolko QFN puzdier tu v brmlabe ( atmega 8u2 z arduina
uno , a stepper motor drivre k reprapu )  vsetko so 100% uspesnostou ,,, ale
tieto MEMS chipy su dakedy dost zradne ...

pozdrav
Sargon

Dne 24. dubna 2011 14:11 Tom?? B?in?il <me at tomasbrincil.cz> napsal(a):

> Zdrav?m v?echny bastl??e s pevnou rukou a pot?ebn?m vybaven?m.
> Na?el by se n?kdo kdo by mi v budoucnu mohl pomoct s nap?jen?m sou??stky v
> QFN pouzd?e na desku plo?n?ch spoj??
> Jde konkr?tn? o tuto sou??stku:
> http://cz.farnell.com/jsp/search/productdetail.jsp?sku=1862383
>
> D?kuji za reakce, Tom?? B?in?il
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110424/ac5e794a/attachment.html>

From pasky at ucw.cz  Mon Apr 25 14:59:56 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 25 Apr 2011 14:59:56 +0200
Subject: [Brmlab] Prohlidka prazskych kolektoru
In-Reply-To: <20110202183222.GM3917@machine.or.cz>
References: <20110202183222.GM3917@machine.or.cz>
Message-ID: <20110425125956.GO3258@machine.or.cz>

  Ahoj!

On Wed, Feb 02, 2011 at 07:32:22PM +0100, Petr Baudis wrote:
>   Existuje moznost exkurze do kolektoru v prazskem centru - my bysme
> urcite neco takoveho chteli podniknout, ale napadlo nas, ze by mohlo
> stat za to, zorganizovat brmlabi exkurzi:
> 
> 	http://www.kolektory.cz/index/10_zt.html
> 	http://www.kolektory.cz/index/10_zt/10_01_trasa_c.html
> 	http://www.kolektory.cz/index/10_zt/10_01_trasa_d.html
> 
>   Trasa C je delsi a asi zajimavejsi, ale drazsi a narocnejsi.  Pri
> plnem naplneni kapacity by byla cena na osobu 300-400Kc, cim mene lidi,
> tim drazsi. :-)

  Nakonec to trochu usnulo; prihlasilo se ale jen cca 8-10 lidi, coz
znamena, ze by cena byla dost vysoka. Zaroven mi po blizsim zkoumani
trasa C prijde isce delsi, ale na technicke zajimavosti je bohatsi
trasa D, a to mne asi zajima trochu vice nez historicke podzemi.

  S ohledem na vyse uvedene jsme se rozhodli, ze nema cenu organizovat
exkluzivni skupinovou vypravu. Rozhodli jsme se ale, ze alespon
oznamime, ze do podzemi na trasu D vyrazime ve stredu 11.5. 16:00-18:00.
Uz jsme tri, prida-li se ke kolektivu vice z Vas, kdo se do podzemi
chystate, bude nam veseleji a pozasneme spolecne. Listek za 300Kc si
muzete koupit na:

	http://www.prahatechnicka.cz/modules/f_zt/trasa.php

  Tesime se,

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From ruza at ruza.eu  Mon Apr 25 16:03:43 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Mon, 25 Apr 2011 16:03:43 +0200
Subject: [Brmlab] Prohlidka prazskych kolektoru
In-Reply-To: <20110425125956.GO3258@machine.or.cz>
References: <20110202183222.GM3917@machine.or.cz>
	<20110425125956.GO3258@machine.or.cz>
Message-ID: <4DB57F3F.3040805@ruza.eu>

btw, ta URL neregistrovanymu uzivateli nevrati nic, je treba se 
zaregistrovat jinak se nedozvite nic

Toho 11.5. uz mate i zaplaceno? Ja budu minimalne do obeda jeste asi na 
europen.cz a nevim zda se stihnu vratit do Prahy vcas. Radsi bych si 
koupil listek na jiny datum, kdy budu mit vetsi jistotu ze dorazim. Proc 
se to resi takhle zbrkle kdyz bylo a je spousta casu se dohodnout na 
vhodnem terminu :(

ruza

On 04/25/2011 02:59 PM, Petr Baudis wrote:
> chystate, bude nam veseleji a pozasneme spolecne. Listek za 300Kc si
> muzete koupit na:
>
> 	http://www.prahatechnicka.cz/modules/f_zt/trasa.php


From pasky at ucw.cz  Mon Apr 25 19:57:32 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Mon, 25 Apr 2011 19:57:32 +0200
Subject: [Brmlab] Prohlidka prazskych kolektoru
In-Reply-To: <4DB57F3F.3040805@ruza.eu>
References: <20110202183222.GM3917@machine.or.cz>
	<20110425125956.GO3258@machine.or.cz> <4DB57F3F.3040805@ruza.eu>
Message-ID: <20110425175732.GS3258@machine.or.cz>

  Ahoj!

On Mon, Apr 25, 2011 at 04:03:43PM +0200, Pavel Ruzicka wrote:
> btw, ta URL neregistrovanymu uzivateli nevrati nic, je treba se
> zaregistrovat jinak se nedozvite nic

  Aha, tak to se omlouvam, viz http://www.prahatechnicka.cz/.

> Toho 11.5. uz mate i zaplaceno? Ja budu minimalne do obeda jeste asi
> na europen.cz a nevim zda se stihnu vratit do Prahy vcas. Radsi bych
> si koupil listek na jiny datum, kdy budu mit vetsi jistotu ze
> dorazim. Proc se to resi takhle zbrkle kdyz bylo a je spousta casu
> se dohodnout na vhodnem terminu :(

  Mame zaplaceno. Potiz je, ze terminu je relativne malo; v kvetnu to
byl jediny s rozumnym poctem volnych mist, zacatkem cervna jsou zase
ruzne prijimacky a zkouskove, realne by to pak vychazelo nekdy na pulku
a konec cervna, a tak dlouho se mi zase uz cekat nechce. Krom toho
temer vzdycky se najde nekdo, komu se nejaky termin nehodi a tady proste
v rozumnem casovem horizontu na vyber nebylo.

				Petr "Pasky" Baudis


From pasky at ucw.cz  Wed Apr 27 17:07:27 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Wed, 27 Apr 2011 17:07:27 +0200
Subject: [Brmlab] Prednaska CMA v brmlabu
In-Reply-To: <75252.4795.7657-19660-1145884301-1303148881@seznam.cz>
References: <20110415014553.GV3258@machine.or.cz>
	<75252.4795.7657-19660-1145884301-1303148881@seznam.cz>
Message-ID: <20110427150727.GY3258@machine.or.cz>

  Ahoj!

  Snazim se pro brmlab domluvit prednasku CMA - jde o sdruzeni nadsencu
do podzemi vseho druhu (nejen jeskyne, ale hlavne opustene doly,
tovarny, kryty, valecne stavby, ...), prednaska je, chapu-li to dobre,
castecne naucna a castecne cestopisna - pokryva zejmena spoustu
materialu a lokalit, ktere na internetu nejsou verejne vystavene
(zejmena z obavy pred prilisnym/nevhodnym zajmem sirsi verejnosti).

  Predbezne jsme domluveni na stredu 18.5. od 19:30. Pokud nekdo hodne
stoji o zmenu terminu, dejte mi vedet, jeste to lze. Zaroven by bylo
dobre zjistit uroven zajmu (jestli tu nejsem divny sam), tak mi klidne
napiste soukrome mailem "to je super, urcite prijdu".

  Nabidka temat je take siroka. Priklanim se k doporuceni na konci, ale
najde-li se nekolik zajemcu o neco konkretnejsiho, lze se dohodnout:

On Mon, Apr 18, 2011 at 07:48:01PM +0200, L.Lahoda wrote:
> Obvykle p?edn???m na ?vod n?co m?lo o historick?m podzem? obecn? a o ?innosti CMA,
> a pak v?dy n?kolik na?ich zaj?mav?ch akc? z pr?zkum? - obvykle z lokalit, kter? se na internetu z r?zn?ch d?vod? nepublikuj? nebo z pozn?vac?ch cest po podzem? (nebo hor?ch) st?edn? evropy
> P?edn??ka je v?dy audiovizu?ln? p?smo (dataprojektorem) fotky, pl?nky, videa se zvukem, historick? dokumenty, 3D vizualizace, apod...
> Obvykl? doba p?edn??ky je 2 hodiny, nez??dka je v?ak z?jem takov?, ?e se i o hodinu prot?hne... Mohu okam?it? na m?st? reagovat na z?jem publika o konkr?tn? lokality ?i problematiku a za?adit i jin?, dole neuveden? p??sp?vky...
> 
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Pro leto?n? sez?nu m?m p?ipraven? a aktualizovan? tyto p?edn??ky:
> (v?b?r po vz?jemn? dohod?)
> 
> Podzemn? sv?t
> - v?dy na ?vod - o historick?m podzem? a o lidech, kte?? je zkoumaj? (asi 30 minut)
> 
> Tajemstv? ?achty v sudetech
> (n?kolikalet? p?tr?n? a kop?n? v zamaskovan? ?acht?, kter? m?la ukr?vat nacistick? tajn? dokumenty)
> minim?ln? 30 minut
> 
> ?achta v sadu
> (hled?n? b?jn?ho, 60 let ztracen?ho vchodu E do podzemn? tov?rny Richard v Litom??ic?ch, a samoz?ejm? i historie t?to nejv?t?? podzemn? tov?rny na na?em ?zem?, v?etn? popisu vzniku Virtu?ln? prohl?dky podzemn? tov?rny) minim?ln? 30 minut
> 
> Tajemstv? vojensk?ch prostor?
> (prvn? pr?zkumy prostor? po odchodu sov?tsk?ch okupa?n?ch vojsk - s d?razem na n?lezy tajn?ch jadern?ch za??zen? a velitelsk?ch bunkr?. Citace p?vodn?ch tajn?ch dokument?, Fotografie m?st, kter? u? se v p?vodn?m stavu nedochovala... Dobrodru?n? pr?zkumy lidupr?zdn? krajiny. Ralsko, Milovice, Libav?, Doupov aj...) minim?ln? 1 hodina, sp??e 2 hodiny
> 
> Stopy v?lky v poho?? Burda
> (unik?tn? ned?vno nalezen? podzemn? komplex na b?ehu Dunaje, kter? dosud nebyl pln? prozkoum?n)
> asi 15 minut (v leto?n?m roce o n?m budeme nat??et dokument?rn? film...)
> 
> Tvrz Stachelberg
> (pr?zkum zapomenut?ch, zatopen?ch a nep??stupn?ch ??st? na?? nejv?t?? prvorepublikov? pohrani?n? pevnosti - m?sta, kde od roku 1938 pravd?podobn? nikdo nebyl...)
> asi 30 minut
> 
> Lomy Amerika - myst?rium ?esk?ho krasu
> (historie jesky???sk?ch pr?zkum? syst?mu podzemn?ch chodeb ve zn?m?ch lomech amerika u karl?tejna, historie, pot?p?n?, mapov?n?, pov?sti o Hagenovi, nat??en? film??)
> minim?ln? 1 hodina
> 
> Velitelstv? Drnov
> (sn?mky z ve?ejnosti dosud nep??stupn?ho, unik?tn? dochovan?ho podzemn?ho velitelstv? protivzdu?n? ochrany ?SSR a pot? ?SR)
> asi 15 minut
> 
> Nejkr?sn?j?? evropsk? hory
> (Cestopisn? vypr?v?n? o na?ich vysokohorsk?ch cest?ch po Tatr?ch, rakousk?ch, francouzsk?ch a ?v?carsk?ch alp?ch - v l?t? i v zim?, v?etn? sn?mk? z nejzn?m?j??ch horsk?ch st?edisek (Zermatt, Chamonix, Kaprun, Dachstein, Tatransk? Lomnica... )/nejedn? se o podzem?/
> minim?ln? 2 hodiny /vhodn? na samostatnou p?edn??ku/
> 
> Velk? okruh ?eskou a slovenskou krajinou
> (fotografie z na?ich expedic po vojensk?ch prostorech, podzemn?ch tov?rn?ch, star?ch dolech, hlubok?ch ?acht?ch, opu?t?n?ch ?elezni?n?ch tunelech, vrcholech hor i podzem? m?st a hrad?... Technick? pam?tky, z??ceniny, romsk? osady, z??itky z cest r?zovitou krajinou, skanzeny... Tatry, Fatry, Liptov, Dukla, Doupov, Libav?, Ti?novsko, Plze?sko, podzem? Prahy...) stovky fotografi? - krat?? verze 1,5 hodiny, del?? verze 3 hodiny... /vhodn? na samostanou p?edn??ku/
> 
> 
> Kr?tk? n?kolikaminutov? p?edn??ky ev. nato?en? videoklipy na zpest?en? p?edn??ky:
> Podzem? ?i?kova, Tvrz ?ibenice, Studna Lobe?, Podzem? hradu D?v?n, Pot?p?n? ve st??brn?m dole, Podzem? D???nsk?ho sn??n?ku, Podzemn? lomy Skalice, N?hony u Lindavy... P?sni?kov? klipy Tul?ci podzem?, Balada o Americe, Historie CMA...
> 
> Z n?kolika uveden?ch ??st? v?m mohu slo?it p?edn??ku, podle toho, co by publikum mohlo zaj?mat. Jednotliv? ??sti maj? v?dy krat?? a del?? verzi (mohou obsahovat od cca 60 a? do 800 fotografi?) - aby se do po?adovan? d?lky p?edn??ky ve?ly
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> 
> Osobn? bych pro V?s doporu?il
> Velk? okruh ?eskou a slovenskou krajinou
> 
> tam je i dost industri?lu...

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From ruza at ruza.eu  Wed Apr 27 17:22:55 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Wed, 27 Apr 2011 17:22:55 +0200
Subject: [Brmlab] Prednaska CMA v brmlabu
In-Reply-To: <20110427150727.GY3258@machine.or.cz>
References: <20110415014553.GV3258@machine.or.cz>	<75252.4795.7657-19660-1145884301-1303148881@seznam.cz>
	<20110427150727.GY3258@machine.or.cz>
Message-ID: <4DB834CF.9040202@ruza.eu>

Zajem je, termin v pohode. podle popisu zaujaly:

?achta v sadu
Tajemstv? vojensk?ch prostor?
Stopy v?lky v poho?? Burda
Tvrz Stachelberg
Lomy Amerika - myst?rium ?esk?ho krasu
Velitelstv? Drnov

ruza



From blackhead at blackhead.cz  Wed Apr 27 21:29:15 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Wed, 27 Apr 2011 21:29:15 +0200
Subject: [Brmlab] Prednaska CMA v brmlabu
In-Reply-To: <20110427150727.GY3258@machine.or.cz>
Message-ID: <BNEBJCHIKOICJLAPBAPHEEOKDLAA.blackhead@blackhead.cz>

Ahoj!

Zajimavy bude vsechno.
Ja jsem se o cinnost CMA uz zajimal pred lety. Na Americe jsem byl nekolikrat, z jejich webu mam spoutu informaci, vcetne planu celeho podzemi (Tomsuch ho ma nekde vytisteny asi na A1/A0 ?), zkoumali jsme i puvodni ruskou vojenskou zakladnu v okoli Ralska. Byl jsem i v takzvanem "Proseckem pekle". I o tom by mohl Tomsuch vypravet vic nez ja...

Vrele doporucuju cokoli o podzemi made in CMA. ;-)

BH

P.S.: Ja se rad prijdu podivat, kdykoli, kdy budu mit zrovna cas. ;-)


-----Original Message-----
From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On
Behalf Of Petr Baudis
Sent: Wednesday, April 27, 2011 5:07 PM
To: brmlab at brmlab.cz
Subject: [Brmlab] Prednaska CMA v brmlabu


  Ahoj!

  Snazim se pro brmlab domluvit prednasku CMA - jde o sdruzeni nadsencu
do podzemi vseho druhu (nejen jeskyne, ale hlavne opustene doly,
tovarny, kryty, valecne stavby, ...), prednaska je, chapu-li to dobre,
castecne naucna a castecne cestopisna - pokryva zejmena spoustu
materialu a lokalit, ktere na internetu nejsou verejne vystavene
(zejmena z obavy pred prilisnym/nevhodnym zajmem sirsi verejnosti).

  Predbezne jsme domluveni na stredu 18.5. od 19:30. Pokud nekdo hodne
stoji o zmenu terminu, dejte mi vedet, jeste to lze. Zaroven by bylo
dobre zjistit uroven zajmu (jestli tu nejsem divny sam), tak mi klidne
napiste soukrome mailem "to je super, urcite prijdu".

  Nabidka temat je take siroka. Priklanim se k doporuceni na konci, ale
najde-li se nekolik zajemcu o neco konkretnejsiho, lze se dohodnout:

On Mon, Apr 18, 2011 at 07:48:01PM +0200, L.Lahoda wrote:
> Obvykle p?edn???m na ?vod n?co m?lo o historick?m podzem? obecn? a o ?innosti CMA,
> a pak v?dy n?kolik na?ich zaj?mav?ch akc? z pr?zkum? - obvykle z lokalit, kter? se na internetu z r?zn?ch d?vod? nepublikuj? nebo z pozn?vac?ch cest po podzem? (nebo hor?ch) st?edn? evropy
> P?edn??ka je v?dy audiovizu?ln? p?smo (dataprojektorem) fotky, pl?nky, videa se zvukem, historick? dokumenty, 3D vizualizace, apod...
> Obvykl? doba p?edn??ky je 2 hodiny, nez??dka je v?ak z?jem takov?, ?e se i o hodinu prot?hne... Mohu okam?it? na m?st? reagovat na z?jem publika o konkr?tn? lokality ?i problematiku a za?adit i jin?, dole neuveden? p??sp?vky...
> 
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> Pro leto?n? sez?nu m?m p?ipraven? a aktualizovan? tyto p?edn??ky:
> (v?b?r po vz?jemn? dohod?)
> 
> Podzemn? sv?t
> - v?dy na ?vod - o historick?m podzem? a o lidech, kte?? je zkoumaj? (asi 30 minut)
> 
> Tajemstv? ?achty v sudetech
> (n?kolikalet? p?tr?n? a kop?n? v zamaskovan? ?acht?, kter? m?la ukr?vat nacistick? tajn? dokumenty)
> minim?ln? 30 minut
> 
> ?achta v sadu
> (hled?n? b?jn?ho, 60 let ztracen?ho vchodu E do podzemn? tov?rny Richard v Litom??ic?ch, a samoz?ejm? i historie t?to nejv?t?? podzemn? tov?rny na na?em ?zem?, v?etn? popisu vzniku Virtu?ln? prohl?dky podzemn? tov?rny) minim?ln? 30 minut
> 
> Tajemstv? vojensk?ch prostor?
> (prvn? pr?zkumy prostor? po odchodu sov?tsk?ch okupa?n?ch vojsk - s d?razem na n?lezy tajn?ch jadern?ch za??zen? a velitelsk?ch bunkr?. Citace p?vodn?ch tajn?ch dokument?, Fotografie m?st, kter? u? se v p?vodn?m stavu nedochovala... Dobrodru?n? pr?zkumy lidupr?zdn? krajiny. Ralsko, Milovice, Libav?, Doupov aj...) minim?ln? 1 hodina, sp??e 2 hodiny
> 
> Stopy v?lky v poho?? Burda
> (unik?tn? ned?vno nalezen? podzemn? komplex na b?ehu Dunaje, kter? dosud nebyl pln? prozkoum?n)
> asi 15 minut (v leto?n?m roce o n?m budeme nat??et dokument?rn? film...)
> 
> Tvrz Stachelberg
> (pr?zkum zapomenut?ch, zatopen?ch a nep??stupn?ch ??st? na?? nejv?t?? prvorepublikov? pohrani?n? pevnosti - m?sta, kde od roku 1938 pravd?podobn? nikdo nebyl...)
> asi 30 minut
> 
> Lomy Amerika - myst?rium ?esk?ho krasu
> (historie jesky???sk?ch pr?zkum? syst?mu podzemn?ch chodeb ve zn?m?ch lomech amerika u karl?tejna, historie, pot?p?n?, mapov?n?, pov?sti o Hagenovi, nat??en? film??)
> minim?ln? 1 hodina
> 
> Velitelstv? Drnov
> (sn?mky z ve?ejnosti dosud nep??stupn?ho, unik?tn? dochovan?ho podzemn?ho velitelstv? protivzdu?n? ochrany ?SSR a pot? ?SR)
> asi 15 minut
> 
> Nejkr?sn?j?? evropsk? hory
> (Cestopisn? vypr?v?n? o na?ich vysokohorsk?ch cest?ch po Tatr?ch, rakousk?ch, francouzsk?ch a ?v?carsk?ch alp?ch - v l?t? i v zim?, v?etn? sn?mk? z nejzn?m?j??ch horsk?ch st?edisek (Zermatt, Chamonix, Kaprun, Dachstein, Tatransk? Lomnica... )/nejedn? se o podzem?/
> minim?ln? 2 hodiny /vhodn? na samostatnou p?edn??ku/
> 
> Velk? okruh ?eskou a slovenskou krajinou
> (fotografie z na?ich expedic po vojensk?ch prostorech, podzemn?ch tov?rn?ch, star?ch dolech, hlubok?ch ?acht?ch, opu?t?n?ch ?elezni?n?ch tunelech, vrcholech hor i podzem? m?st a hrad?... Technick? pam?tky, z??ceniny, romsk? osady, z??itky z cest r?zovitou krajinou, skanzeny... Tatry, Fatry, Liptov, Dukla, Doupov, Libav?, Ti?novsko, Plze?sko, podzem? Prahy...) stovky fotografi? - krat?? verze 1,5 hodiny, del?? verze 3 hodiny... /vhodn? na samostanou p?edn??ku/
> 
> 
> Kr?tk? n?kolikaminutov? p?edn??ky ev. nato?en? videoklipy na zpest?en? p?edn??ky:
> Podzem? ?i?kova, Tvrz ?ibenice, Studna Lobe?, Podzem? hradu D?v?n, Pot?p?n? ve st??brn?m dole, Podzem? D???nsk?ho sn??n?ku, Podzemn? lomy Skalice, N?hony u Lindavy... P?sni?kov? klipy Tul?ci podzem?, Balada o Americe, Historie CMA...
> 
> Z n?kolika uveden?ch ??st? v?m mohu slo?it p?edn??ku, podle toho, co by publikum mohlo zaj?mat. Jednotliv? ??sti maj? v?dy krat?? a del?? verzi (mohou obsahovat od cca 60 a? do 800 fotografi?) - aby se do po?adovan? d?lky p?edn??ky ve?ly
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> 
> Osobn? bych pro V?s doporu?il
> Velk? okruh ?eskou a slovenskou krajinou
> 
> tam je i dost industri?lu...

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.
_______________________________________________
Brmlab mailing list
Brmlab at brmlab.cz
http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab



From niekt0 at hysteria.sk  Wed Apr 27 23:26:42 2011
From: niekt0 at hysteria.sk (niekt0)
Date: Wed, 27 Apr 2011 23:26:42 +0200
Subject: [Brmlab] Prednaska CMA v brmlabu
In-Reply-To: <20110427150727.GY3258@machine.or.cz>
References: <20110415014553.GV3258@machine.or.cz>
	<75252.4795.7657-19660-1145884301-1303148881@seznam.cz>
	<20110427150727.GY3258@machine.or.cz>
Message-ID: <BANLkTimiKxa5OyyDhgm18oUX3HR1JU9n+Q@mail.gmail.com>

Ja som urcite za,
este by som dotiahol par ludi..

n.

On 4/27/11, Petr Baudis <pasky at ucw.cz> wrote:
>   Ahoj!
..


From suchan.tomas at gmail.com  Thu Apr 28 10:11:58 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Thu, 28 Apr 2011 10:11:58 +0200
Subject: [Brmlab] Prednaska CMA v brmlabu
In-Reply-To: <BANLkTimiKxa5OyyDhgm18oUX3HR1JU9n+Q@mail.gmail.com>
References: <20110415014553.GV3258@machine.or.cz>
	<75252.4795.7657-19660-1145884301-1303148881@seznam.cz>
	<20110427150727.GY3258@machine.or.cz>
	<BANLkTimiKxa5OyyDhgm18oUX3HR1JU9n+Q@mail.gmail.com>
Message-ID: <BANLkTimZe1W1LpzML4PhXWipFPWMc2Po-Q@mail.gmail.com>

Uz se nemohu dockat na Laco Lahodu :)
Dne 27.4.2011 23:27 "niekt0" <niekt0 at hysteria.sk> napsal(a):
> Ja som urcite za,
> este by som dotiahol par ludi..
>
> n.
>
> On 4/27/11, Petr Baudis <pasky at ucw.cz> wrote:
>> Ahoj!
> ..
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110428/7375bba6/attachment.html>

From czestmyr at gmail.com  Thu Apr 28 16:27:57 2011
From: czestmyr at gmail.com (Cestmir Houska)
Date: Thu, 28 Apr 2011 16:27:57 +0200
Subject: [Brmlab] Prezentace na robotickem dni
Message-ID: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>

Ahoj,

tak jsem mluvil s dr. Obdrzalkem (hlavni organizator Robotickeho dne a
Eurobota 2011) ohledne toho stolu pro Brmlab, kde bychom se mohli
prezentovat. Rekl mi, ze slovo "hacker" ma v Ceske verejnosti porad jeste
negativni konotace, a proto si neni uplne jistej tim, jestli by se toho, ze
se tam prezentujeme, nemohli vrhnout senzacechtivi novinari a neudelali z
toho prusvih. Namitl jsem, ze mimo jine kvuli bourani techhle stereotypu
Brmlab existuje, ale nepomohlo to :-) Z pozice cloveka, kterej kazdej rok
obtizne shani sponzory, aby mohl Robotickej den probehnout, to na druhou
stranu chapu.

Nicmene, uplne kategoricky "ne" to prej neni - mame si pripravit nejaky
kratky info o tom, co a jak bysme tam chteli prezentovat a podle toho se
jeste rozhodne.

Zdar,

Cestmir
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110428/8e964f89/attachment.html>

From czestmyr at gmail.com  Thu Apr 28 16:50:04 2011
From: czestmyr at gmail.com (Cestmir Houska)
Date: Thu, 28 Apr 2011 16:50:04 +0200
Subject: [Brmlab] Funkenschlag
Message-ID: <BANLkTik-MYJJ3-CheeNVZdBRQuXb7DSDSg@mail.gmail.com>

Ahoj,

dovolim si jeste jeden spam. Dnes vecer kolem pul osme prinesu do Brmlabu
deskovou hru "Funkenschlag", ve ktery se hraci ocitaji v roli elektrarensky
spolecnosti, buduji svoje elektrarny a distribucni sit a snazi se vydelat
vyrabenim a prodejem elektriny co nejvic penez. Takze kdo si chce zahrat,
necht urcite prijde! ;-)

Cestmir
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110428/ac165cd9/attachment.html>

From sofie.petru at ignum.cz  Thu Apr 28 16:53:46 2011
From: sofie.petru at ignum.cz (Sofie Petru)
Date: Thu, 28 Apr 2011 16:53:46 +0200
Subject: [Brmlab] Prednaska CMA v brmlabu
In-Reply-To: <20110427150727.GY3258@machine.or.cz>
References: <20110415014553.GV3258@machine.or.cz>	<75252.4795.7657-19660-1145884301-1303148881@seznam.cz>
	<20110427150727.GY3258@machine.or.cz>
Message-ID: <4DB97F7A.30100@ignum.cz>

zdravim vsechny :)
ja bych urcite chtela prijit.

noveprichozi.
bye, Truce - Sofie.

--- And they look like very large, utterly minimalist pieces of
extremely high-end Scandinavian jewellery.

On 27.4.2011 17:07, Petr Baudis wrote:
>   Ahoj!
> 
>   Snazim se pro brmlab domluvit prednasku CMA - jde o sdruzeni nadsencu
> do podzemi vseho druhu (nejen jeskyne, ale hlavne opustene doly,
> tovarny, kryty, valecne stavby, ...), prednaska je, chapu-li to dobre,
> castecne naucna a castecne cestopisna - pokryva zejmena spoustu
> materialu a lokalit, ktere na internetu nejsou verejne vystavene
> (zejmena z obavy pred prilisnym/nevhodnym zajmem sirsi verejnosti).
> 
>   Predbezne jsme domluveni na stredu 18.5. od 19:30. Pokud nekdo hodne
> stoji o zmenu terminu, dejte mi vedet, jeste to lze. Zaroven by bylo
> dobre zjistit uroven zajmu (jestli tu nejsem divny sam), tak mi klidne
> napiste soukrome mailem "to je super, urcite prijdu".
> 
>   Nabidka temat je take siroka. Priklanim se k doporuceni na konci, ale
> najde-li se nekolik zajemcu o neco konkretnejsiho, lze se dohodnout:
> 
> On Mon, Apr 18, 2011 at 07:48:01PM +0200, L.Lahoda wrote:
>> Obvykle p?edn???m na ?vod n?co m?lo o historick?m podzem? obecn? a o ?innosti CMA,
>> a pak v?dy n?kolik na?ich zaj?mav?ch akc? z pr?zkum? - obvykle z lokalit, kter? se na internetu z r?zn?ch d?vod? nepublikuj? nebo z pozn?vac?ch cest po podzem? (nebo hor?ch) st?edn? evropy
>> P?edn??ka je v?dy audiovizu?ln? p?smo (dataprojektorem) fotky, pl?nky, videa se zvukem, historick? dokumenty, 3D vizualizace, apod...
>> Obvykl? doba p?edn??ky je 2 hodiny, nez??dka je v?ak z?jem takov?, ?e se i o hodinu prot?hne... Mohu okam?it? na m?st? reagovat na z?jem publika o konkr?tn? lokality ?i problematiku a za?adit i jin?, dole neuveden? p??sp?vky...
>>
>> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> Pro leto?n? sez?nu m?m p?ipraven? a aktualizovan? tyto p?edn??ky:
>> (v?b?r po vz?jemn? dohod?)
>>
>> Podzemn? sv?t
>> - v?dy na ?vod - o historick?m podzem? a o lidech, kte?? je zkoumaj? (asi 30 minut)
>>
>> Tajemstv? ?achty v sudetech
>> (n?kolikalet? p?tr?n? a kop?n? v zamaskovan? ?acht?, kter? m?la ukr?vat nacistick? tajn? dokumenty)
>> minim?ln? 30 minut
>>
>> ?achta v sadu
>> (hled?n? b?jn?ho, 60 let ztracen?ho vchodu E do podzemn? tov?rny Richard v Litom??ic?ch, a samoz?ejm? i historie t?to nejv?t?? podzemn? tov?rny na na?em ?zem?, v?etn? popisu vzniku Virtu?ln? prohl?dky podzemn? tov?rny) minim?ln? 30 minut
>>
>> Tajemstv? vojensk?ch prostor?
>> (prvn? pr?zkumy prostor? po odchodu sov?tsk?ch okupa?n?ch vojsk - s d?razem na n?lezy tajn?ch jadern?ch za??zen? a velitelsk?ch bunkr?. Citace p?vodn?ch tajn?ch dokument?, Fotografie m?st, kter? u? se v p?vodn?m stavu nedochovala... Dobrodru?n? pr?zkumy lidupr?zdn? krajiny. Ralsko, Milovice, Libav?, Doupov aj...) minim?ln? 1 hodina, sp??e 2 hodiny
>>
>> Stopy v?lky v poho?? Burda
>> (unik?tn? ned?vno nalezen? podzemn? komplex na b?ehu Dunaje, kter? dosud nebyl pln? prozkoum?n)
>> asi 15 minut (v leto?n?m roce o n?m budeme nat??et dokument?rn? film...)
>>
>> Tvrz Stachelberg
>> (pr?zkum zapomenut?ch, zatopen?ch a nep??stupn?ch ??st? na?? nejv?t?? prvorepublikov? pohrani?n? pevnosti - m?sta, kde od roku 1938 pravd?podobn? nikdo nebyl...)
>> asi 30 minut
>>
>> Lomy Amerika - myst?rium ?esk?ho krasu
>> (historie jesky???sk?ch pr?zkum? syst?mu podzemn?ch chodeb ve zn?m?ch lomech amerika u karl?tejna, historie, pot?p?n?, mapov?n?, pov?sti o Hagenovi, nat??en? film??)
>> minim?ln? 1 hodina
>>
>> Velitelstv? Drnov
>> (sn?mky z ve?ejnosti dosud nep??stupn?ho, unik?tn? dochovan?ho podzemn?ho velitelstv? protivzdu?n? ochrany ?SSR a pot? ?SR)
>> asi 15 minut
>>
>> Nejkr?sn?j?? evropsk? hory
>> (Cestopisn? vypr?v?n? o na?ich vysokohorsk?ch cest?ch po Tatr?ch, rakousk?ch, francouzsk?ch a ?v?carsk?ch alp?ch - v l?t? i v zim?, v?etn? sn?mk? z nejzn?m?j??ch horsk?ch st?edisek (Zermatt, Chamonix, Kaprun, Dachstein, Tatransk? Lomnica... )/nejedn? se o podzem?/
>> minim?ln? 2 hodiny /vhodn? na samostatnou p?edn??ku/
>>
>> Velk? okruh ?eskou a slovenskou krajinou
>> (fotografie z na?ich expedic po vojensk?ch prostorech, podzemn?ch tov?rn?ch, star?ch dolech, hlubok?ch ?acht?ch, opu?t?n?ch ?elezni?n?ch tunelech, vrcholech hor i podzem? m?st a hrad?... Technick? pam?tky, z??ceniny, romsk? osady, z??itky z cest r?zovitou krajinou, skanzeny... Tatry, Fatry, Liptov, Dukla, Doupov, Libav?, Ti?novsko, Plze?sko, podzem? Prahy...) stovky fotografi? - krat?? verze 1,5 hodiny, del?? verze 3 hodiny... /vhodn? na samostanou p?edn??ku/
>>
>>
>> Kr?tk? n?kolikaminutov? p?edn??ky ev. nato?en? videoklipy na zpest?en? p?edn??ky:
>> Podzem? ?i?kova, Tvrz ?ibenice, Studna Lobe?, Podzem? hradu D?v?n, Pot?p?n? ve st??brn?m dole, Podzem? D???nsk?ho sn??n?ku, Podzemn? lomy Skalice, N?hony u Lindavy... P?sni?kov? klipy Tul?ci podzem?, Balada o Americe, Historie CMA...
>>
>> Z n?kolika uveden?ch ??st? v?m mohu slo?it p?edn??ku, podle toho, co by publikum mohlo zaj?mat. Jednotliv? ??sti maj? v?dy krat?? a del?? verzi (mohou obsahovat od cca 60 a? do 800 fotografi?) - aby se do po?adovan? d?lky p?edn??ky ve?ly
>> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>>
>> Osobn? bych pro V?s doporu?il
>> Velk? okruh ?eskou a slovenskou krajinou
>>
>> tam je i dost industri?lu...
> 


From czestmyr at gmail.com  Thu Apr 28 16:56:17 2011
From: czestmyr at gmail.com (Cestmir Houska)
Date: Thu, 28 Apr 2011 16:56:17 +0200
Subject: [Brmlab] Prezentace na robotickem dni
In-Reply-To: <253017.87170.qm@web111509.mail.gq1.yahoo.com>
References: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>
	<253017.87170.qm@web111509.mail.gq1.yahoo.com>
Message-ID: <BANLkTi=JD1726HUJJmCgU7icL5d22DkvMg@mail.gmail.com>

To me uz taky napadlo a asi to tak nekonec udelame. Novinari uz s iasi
nedaji tu praci a nekouknou se na web, kde by videli slovo "hackerspace"...

2011/4/28 Frantisek Apfelbeck <algoldor at yahoo.com>

> A co kdyby jsi rekl, ze Brmlab je krouzek hi-tech kutilu? No a o tom jak se
> hi-tech kutil rekne anglicky bych pomlcel ... :-))
>
>
>
> ------------------------------
> *From:* Cestmir Houska <czestmyr at gmail.com>
> *To:* Prague hackerspace <brmlab at brmlab.cz>
> *Sent:* Thu, April 28, 2011 3:27:57 PM
> *Subject:* [Brmlab] Prezentace na robotickem dni
>
> Ahoj,
>
> tak jsem mluvil s dr. Obdrzalkem (hlavni organizator Robotickeho dne a
> Eurobota 2011) ohledne toho stolu pro Brmlab, kde bychom se mohli
> prezentovat. Rekl mi, ze slovo "hacker" ma v Ceske verejnosti porad jeste
> negativni konotace, a proto si neni uplne jistej tim, jestli by se toho, ze
> se tam prezentujeme, nemohli vrhnout senzacechtivi novinari a neudelali z
> toho prusvih. Namitl jsem, ze mimo jine kvuli bourani techhle stereotypu
> Brmlab existuje, ale nepomohlo to :-) Z pozice cloveka, kterej kazdej rok
> obtizne shani sponzory, aby mohl Robotickej den probehnout, to na druhou
> stranu chapu.
>
> Nicmene, uplne kategoricky "ne" to prej neni - mame si pripravit nejaky
> kratky info o tom, co a jak bysme tam chteli prezentovat a podle toho se
> jeste rozhodne.
>
> Zdar,
>
> Cestmir
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110428/eb151c20/attachment.html>

From stick at gk2.sk  Thu Apr 28 17:04:59 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Thu, 28 Apr 2011 17:04:59 +0200
Subject: [Brmlab] Prezentace na robotickem dni
In-Reply-To: <BANLkTi=JD1726HUJJmCgU7icL5d22DkvMg@mail.gmail.com>
References: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>	<253017.87170.qm@web111509.mail.gq1.yahoo.com>
	<BANLkTi=JD1726HUJJmCgU7icL5d22DkvMg@mail.gmail.com>
Message-ID: <4DB9821B.50403@gk2.sk>

On 28/04/11 16:56, Cestmir Houska wrote:
> To me uz taky napadlo a asi to tak nekonec udelame. Novinari uz s iasi
> nedaji tu praci a nekouknou se na web, kde by videli slovo "hackerspace"...

O tom sme sa bavili uplne na zaciatku, ked sme rozmyslali nad nazvom a
ci davat do neho "hackerspace" alebo nie. Dohodli sme sa, ze to tam
chceme mat, pretoze vnimanie slova "hacker" je prave jedna z veci ktoru
chceme zmenit.

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From stick at gk2.sk  Thu Apr 28 16:59:39 2011
From: stick at gk2.sk (Pavol Rusnak)
Date: Thu, 28 Apr 2011 16:59:39 +0200
Subject: [Brmlab] Prezentace na robotickem dni
In-Reply-To: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>
References: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>
Message-ID: <4DB980DB.7050703@gk2.sk>

On 28/04/11 16:27, Cestmir Houska wrote:
> tak jsem mluvil s dr. Obdrzalkem (hlavni organizator Robotickeho dne a
> Eurobota 2011) ohledne toho stolu pro Brmlab, kde bychom se mohli
> prezentovat. Rekl mi, ze slovo "hacker" ma v Ceske verejnosti porad jeste
> negativni konotace, a proto si neni uplne jistej tim, jestli by se toho, ze
> se tam prezentujeme, nemohli vrhnout senzacechtivi novinari a neudelali z
> toho prusvih. Namitl jsem, ze mimo jine kvuli bourani techhle stereotypu
> Brmlab existuje, ale nepomohlo to :-) Z pozice cloveka, kterej kazdej rok
> obtizne shani sponzory, aby mohl Robotickej den probehnout, to na druhou
> stranu chapu.

Ja to teda naopak vobec nechapem. S tymi novinarmi by som si moc
nefandil a aj keby nahodou nejaki prisli, tak prave to by bola idealna
prilezitost zvratit tento stereotyp a ukazat ze hackeri sa iba
nenaburavaju do systemov ale bavi ich napr. aj robotika a jemna mechanika.

> Nicmene, uplne kategoricky "ne" to prej neni - mame si pripravit nejaky
> kratky info o tom, co a jak bysme tam chteli prezentovat a podle toho se
> jeste rozhodne.

Samozrejme, nema vyznam na neho tlacit, ak tam nakoniec nikto od nas
nepojde (tradicny problem). Takze otazka skor znie: kto ma cas a chut
prezentovat brmlab 7.5 (je to sobota o tyzden) na robotickom dni? Tento
team by mal potom porozmyslat nad typom prezentacie (vytlacene fotky?,
pustat video z robotour na notebooku?, doniest tam nas reprap a
predvadzat ho?, mozno aj brmbota? netusim v akom bude stave atd.). Potom
mozme zaslat Obdrzalkovi podrobne info a snad to vyjde. (Inak na kazdeho
na matfyze funguje nejaka finta, ja som mal velky problem prenajat si
ucebnu na Malej strane pre nasu openSUSE Release Party, ale nakoniec to
islo viac ako jednoducho ked som ponukol jednemu nemenovanemu Ulitakovi
openSUSE tricko - a nie, Obdrzalek to nebol :D)

-- 
Best Regards / S pozdravom,

Pavol Rusnak <stick at gk2.sk>


From czestmyr at gmail.com  Thu Apr 28 17:11:44 2011
From: czestmyr at gmail.com (Cestmir Houska)
Date: Thu, 28 Apr 2011 17:11:44 +0200
Subject: [Brmlab] Prezentace na robotickem dni
In-Reply-To: <4DB9821B.50403@gk2.sk>
References: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>
	<253017.87170.qm@web111509.mail.gq1.yahoo.com>
	<BANLkTi=JD1726HUJJmCgU7icL5d22DkvMg@mail.gmail.com>
	<4DB9821B.50403@gk2.sk>
Message-ID: <BANLkTim-V1vWuU2PJggFV_U5W6ALh6Y6fg@mail.gmail.com>

2011/4/28 Pavol Rusnak <stick at gk2.sk>

> On 28/04/11 16:56, Cestmir Houska wrote:
> > To me uz taky napadlo a asi to tak nekonec udelame. Novinari uz s iasi
> > nedaji tu praci a nekouknou se na web, kde by videli slovo
> "hackerspace"...
>
> O tom sme sa bavili uplne na zaciatku, ked sme rozmyslali nad nazvom a
> ci davat do neho "hackerspace" alebo nie. Dohodli sme sa, ze to tam
> chceme mat, pretoze vnimanie slova "hacker" je prave jedna z veci ktoru
> chceme zmenit.
>

Ja vim, a taky jsem to v tom prvnim mailu napsal. Mozna, ze bychom se mohli
prezentovat i jako HACKERspace, kdyz budeme mit peknou a konzervativni
prezentaci. Jde jenom o to, presvedcit Obdrzalka, ze to nebude problem ;-)

Cestmir
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110428/80707e38/attachment.html>

From czestmyr at gmail.com  Thu Apr 28 17:13:43 2011
From: czestmyr at gmail.com (Cestmir Houska)
Date: Thu, 28 Apr 2011 17:13:43 +0200
Subject: [Brmlab] Prezentace na robotickem dni
In-Reply-To: <4DB980DB.7050703@gk2.sk>
References: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>
	<4DB980DB.7050703@gk2.sk>
Message-ID: <BANLkTi=3qrBoC4NFs9Y5tQf=Ly5V9VbNbQ@mail.gmail.com>

2011/4/28 Pavol Rusnak <stick at gk2.sk>

> doniest tam nas reprap a predvadzat ho?
>

S Prusou ohledne RepRapu uz prej domluvenej je, takze ten tam bude nehlede
na to, jestli tam bude Brmlab nebo ne.

Cestmir
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110428/82877f9a/attachment.html>

From jenda at hrach.eu  Thu Apr 28 23:12:52 2011
From: jenda at hrach.eu (Jan Hrach)
Date: Thu, 28 Apr 2011 23:12:52 +0200
Subject: [Brmlab] Prohlidka prazskych kolektoru
In-Reply-To: <20110425125956.GO3258@machine.or.cz>
References: <20110202183222.GM3917@machine.or.cz>
	<20110425125956.GO3258@machine.or.cz>
Message-ID: <4DB9D854.6050407@hrach.eu>

Ahoj,
p?id?v?m se, vstupenka koupena.
Jenda

On 25.4.2011 14:59, Petr Baudis wrote:
>   Ahoj!
> 
> On Wed, Feb 02, 2011 at 07:32:22PM +0100, Petr Baudis wrote:
>>   Existuje moznost exkurze do kolektoru v prazskem centru - my bysme
>> urcite neco takoveho chteli podniknout, ale napadlo nas, ze by mohlo
>> stat za to, zorganizovat brmlabi exkurzi:
>>
>> 	http://www.kolektory.cz/index/10_zt.html
>> 	http://www.kolektory.cz/index/10_zt/10_01_trasa_c.html
>> 	http://www.kolektory.cz/index/10_zt/10_01_trasa_d.html
>>
>>   Trasa C je delsi a asi zajimavejsi, ale drazsi a narocnejsi.  Pri
>> plnem naplneni kapacity by byla cena na osobu 300-400Kc, cim mene lidi,
>> tim drazsi. :-)
> 
>   Nakonec to trochu usnulo; prihlasilo se ale jen cca 8-10 lidi, coz
> znamena, ze by cena byla dost vysoka. Zaroven mi po blizsim zkoumani
> trasa C prijde isce delsi, ale na technicke zajimavosti je bohatsi
> trasa D, a to mne asi zajima trochu vice nez historicke podzemi.
> 
>   S ohledem na vyse uvedene jsme se rozhodli, ze nema cenu organizovat
> exkluzivni skupinovou vypravu. Rozhodli jsme se ale, ze alespon
> oznamime, ze do podzemi na trasu D vyrazime ve stredu 11.5. 16:00-18:00.
> Uz jsme tri, prida-li se ke kolektivu vice z Vas, kdo se do podzemi
> chystate, bude nam veseleji a pozasneme spolecne. Listek za 300Kc si
> muzete koupit na:
> 
> 	http://www.prahatechnicka.cz/modules/f_zt/trasa.php
> 
>   Tesime se,
> 

-- 
Jan Hrach, http://jenda.hrach.eu/
GPG 1D9D AC4B E964 0D1E 7F5D 6E03 B72F 6430 9FA4 F536

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110428/165bc0c2/attachment.pgp>

From blackhead at blackhead.cz  Fri Apr 29 00:04:21 2011
From: blackhead at blackhead.cz (George Blackhead)
Date: Fri, 29 Apr 2011 00:04:21 +0200
Subject: [Brmlab] Prednaska CMA v brmlabu
In-Reply-To: <BANLkTimZe1W1LpzML4PhXWipFPWMc2Po-Q@mail.gmail.com>
Message-ID: <BNEBJCHIKOICJLAPBAPHEEONDLAA.blackhead@blackhead.cz>

A ja myslel ze ho nemusis... ;-)
  -----Original Message-----
  From: brmlab-bounces at brmlab.cz [mailto:brmlab-bounces at brmlab.cz]On Behalf
Of Tomas Suchan
  Sent: Thursday, April 28, 2011 10:12 AM
  To: Brmlab: Hackerspace Prague (main discussion)
  Subject: Re: [Brmlab] Prednaska CMA v brmlabu


  Uz se nemohu dockat na Laco Lahodu :)

  Dne 27.4.2011 23:27 "niekt0" <niekt0 at hysteria.sk> napsal(a):
  > Ja som urcite za,
  > este by som dotiahol par ludi..
  >
  > n.
  >
  > On 4/27/11, Petr Baudis <pasky at ucw.cz> wrote:
  >> Ahoj!
  > ..
  > _______________________________________________
  > Brmlab mailing list
  > Brmlab at brmlab.cz
  > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110429/0bfb5471/attachment.html>

From pasky at ucw.cz  Fri Apr 29 11:39:00 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Fri, 29 Apr 2011 11:39:00 +0200
Subject: [Brmlab] [JBoch@tvoeurope.com: [Rada] bb1_Bubenska 1 provozni zmena]
Message-ID: <20110429093900.GM3258@machine.or.cz>

  Preposilam informaci o zmene rezimu dopravy kolem Bubenske. Myslim, ze
nas se nic z toho netyka. Take je tam v priloze PDFko, ktere obsahuje
par zajimavych informaci o budove a vysvetluje, proc je v bude zvysene
pozarni nebezpeci. Tak opatrne s pajkami!

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.
-------------- next part --------------
An embedded message was scrubbed...
From: =?iso-8859-2?Q?Ji=F8=ED_Boch?= <JBoch at tvoeurope.com>
Subject: [Rada] bb1_Bubenska 1 provozni zmena
Date: Fri, 29 Apr 2011 05:37:57 +0000
Size: 1241763
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110429/819d724f/attachment.mht>

From pasky at ucw.cz  Fri Apr 29 13:16:56 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Fri, 29 Apr 2011 13:16:56 +0200
Subject: [Brmlab] [vmarsik@suse.cz: [Talk-cz] STS-134]
Message-ID: <20110429111655.GD18927@machine.or.cz>

----- Forwarded message from Vilem Marsik <vmarsik at suse.cz> -----

FYI, dnes vecer (21:03) je posledni let raketoplanu Endeavour, mozna
posledni let raketoplanu vubec (jeste planuji jeden, ale co vim tak
neni uplne jiste zda bude). Primy prenos by mel byt zase na NASA TV.
Prehravani v Mplayeru je trochu komplikovane, pro vyssi kvalitu je
myslim potreba rtmpdump a trocha hackovani, takze doporucuji
nenechavat na posledni chvili.

VM

----- End forwarded message -----


From rainbof at gmail.com  Fri Apr 29 15:11:24 2011
From: rainbof at gmail.com (Ondrej Beranek)
Date: Fri, 29 Apr 2011 15:11:24 +0200
Subject: [Brmlab] [vmarsik@suse.cz: [Talk-cz] STS-134]
In-Reply-To: <20110429111655.GD18927@machine.or.cz>
References: <20110429111655.GD18927@machine.or.cz>
Message-ID: <BANLkTim9PXQV3SSi1CS67h-jR20gbhi+5w@mail.gmail.com>

co to dneska promitnout v brmlabu ?

Dne 29. dubna 2011 13:16 Petr Baudis <pasky at ucw.cz> napsal(a):

> ----- Forwarded message from Vilem Marsik <vmarsik at suse.cz> -----
>
> FYI, dnes vecer (21:03) je posledni let raketoplanu Endeavour, mozna
> posledni let raketoplanu vubec (jeste planuji jeden, ale co vim tak
> neni uplne jiste zda bude). Primy prenos by mel byt zase na NASA TV.
> Prehravani v Mplayeru je trochu komplikovane, pro vyssi kvalitu je
> myslim potreba rtmpdump a trocha hackovani, takze doporucuji
> nenechavat na posledni chvili.
>
> VM
>
> ----- End forwarded message -----
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110429/ec04509b/attachment.html>

From joe at joe.cz  Fri Apr 29 15:14:09 2011
From: joe at joe.cz (Dominik Joe Pantucek)
Date: Fri, 29 Apr 2011 14:14:09 +0100
Subject: [Brmlab] Prezentace na robotickem dni
In-Reply-To: <BANLkTi=JD1726HUJJmCgU7icL5d22DkvMg@mail.gmail.com>
References: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>
	<253017.87170.qm@web111509.mail.gq1.yahoo.com>
	<BANLkTi=JD1726HUJJmCgU7icL5d22DkvMg@mail.gmail.com>
Message-ID: <1304082849.3350.13992.camel@taniquetil>

Ahoj,

Cestmir Houska p??e v ?t 28. 04. 2011 v 16:56 +0200:
> To me uz taky napadlo a asi to tak nekonec udelame. Novinari uz s iasi
> nedaji tu praci a nekouknou se na web, kde by videli slovo
> "hackerspace"...
> 
> 2011/4/28 Frantisek Apfelbeck <algoldor at yahoo.com>
>         A co kdyby jsi rekl, ze Brmlab je krouzek hi-tech kutilu? No a
>         o tom jak se hi-tech kutil rekne anglicky bych
>         pomlcel ... :-))
>         
>         

s t?m bych siln? nesouhlasil. Pokud n?kdo z oblasti robotiky m? v roce
2011 probl?m se slovem "hacker", je to ryze jeho probl?m. Sakra bav?me
se tady o Brmlabu, kter? byl na RoboTour 2010 a m? funk?n? RepRap.

Pokud bude o tom, zda je o n?s z?jem rozhodovat n?zev a ne to, co budeme
prezentovat, tak osobn? nem?m z?jem na takov? v?ci participovat. Proto?e
i kdy? se budeme jmenovat "Prostitutky z 5. Avenue", tak to nic ne??k? o
tom, co d?l?me v oblasti robotiky...


Joe




From algoldor at yahoo.com  Fri Apr 29 15:47:19 2011
From: algoldor at yahoo.com (Frantisek Apfelbeck)
Date: Fri, 29 Apr 2011 06:47:19 -0700 (PDT)
Subject: [Brmlab] lightning talk - cancel, omluva
Message-ID: <892812.23068.qm@web111513.mail.gq1.yahoo.com>

Zdravim ve spolek,
Omlouvam se, ale musim vzdat ctvrtecni lightning talk. Urychlene se odebiram do 
Irska abych pokracoval ve shaneni zdroju pro cestu do Japonska a tamnejsi 
dobrovolnou praci v ramci pomoci po nestesti. 


Poslu delsi email zahy, mrzi me to, ale zkratka musim zamakat osobne.

S pozdravem,

Frantisek


From suchan.tomas at gmail.com  Fri Apr 29 16:05:59 2011
From: suchan.tomas at gmail.com (Tomas Suchan)
Date: Fri, 29 Apr 2011 16:05:59 +0200
Subject: [Brmlab] Prezentace na robotickem dni
In-Reply-To: <1304082849.3350.13992.camel@taniquetil>
References: <BANLkTi=_TMLRecf0=hGSu-S8L3dm7yCGsw@mail.gmail.com>
	<253017.87170.qm@web111509.mail.gq1.yahoo.com>
	<BANLkTi=JD1726HUJJmCgU7icL5d22DkvMg@mail.gmail.com>
	<1304082849.3350.13992.camel@taniquetil>
Message-ID: <BANLkTikN483KpWyK=c2vN-2VwOu=g5MVhQ@mail.gmail.com>

Naprosto to citim stejne jako Joe....
Dne 29.4.2011 15:15 "Dominik Joe Pantucek" <joe at joe.cz> napsal(a):
> Ahoj,
>
> Cestmir Houska p??e v ?t 28. 04. 2011 v 16:56 +0200:
>> To me uz taky napadlo a asi to tak nekonec udelame. Novinari uz s iasi
>> nedaji tu praci a nekouknou se na web, kde by videli slovo
>> "hackerspace"...
>>
>> 2011/4/28 Frantisek Apfelbeck <algoldor at yahoo.com>
>> A co kdyby jsi rekl, ze Brmlab je krouzek hi-tech kutilu? No a
>> o tom jak se hi-tech kutil rekne anglicky bych
>> pomlcel ... :-))
>>
>>
>
> s t?m bych siln? nesouhlasil. Pokud n?kdo z oblasti robotiky m? v roce
> 2011 probl?m se slovem "hacker", je to ryze jeho probl?m. Sakra bav?me
> se tady o Brmlabu, kter? byl na RoboTour 2010 a m? funk?n? RepRap.
>
> Pokud bude o tom, zda je o n?s z?jem rozhodovat n?zev a ne to, co budeme
> prezentovat, tak osobn? nem?m z?jem na takov? v?ci participovat. Proto?e
> i kdy? se budeme jmenovat "Prostitutky z 5. Avenue", tak to nic ne??k? o
> tom, co d?l?me v oblasti robotiky...
>
>
> Joe
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110429/53efbc6a/attachment.html>

From czestmyr at gmail.com  Fri Apr 29 16:57:40 2011
From: czestmyr at gmail.com (Cestmir Houska)
Date: Fri, 29 Apr 2011 16:57:40 +0200
Subject: [Brmlab] [vmarsik@suse.cz: [Talk-cz] STS-134]
In-Reply-To: <BANLkTim9PXQV3SSi1CS67h-jR20gbhi+5w@mail.gmail.com>
References: <20110429111655.GD18927@machine.or.cz>
	<BANLkTim9PXQV3SSi1CS67h-jR20gbhi+5w@mail.gmail.com>
Message-ID: <BANLkTim8bdSaFArXSZfW7cDufLBuNbxn+g@mail.gmail.com>

Jo, to by nebylo spatny, taky bych se pridal!

Cestmir

2011/4/29 Ondrej Beranek <rainbof at gmail.com>

> co to dneska promitnout v brmlabu ?
>
> Dne 29. dubna 2011 13:16 Petr Baudis <pasky at ucw.cz> napsal(a):
>
> ----- Forwarded message from Vilem Marsik <vmarsik at suse.cz> -----
>>
>> FYI, dnes vecer (21:03) je posledni let raketoplanu Endeavour, mozna
>> posledni let raketoplanu vubec (jeste planuji jeden, ale co vim tak
>> neni uplne jiste zda bude). Primy prenos by mel byt zase na NASA TV.
>> Prehravani v Mplayeru je trochu komplikovane, pro vyssi kvalitu je
>> myslim potreba rtmpdump a trocha hackovani, takze doporucuji
>> nenechavat na posledni chvili.
>>
>> VM
>>
>> ----- End forwarded message -----
>> _______________________________________________
>> Brmlab mailing list
>> Brmlab at brmlab.cz
>> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>>
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110429/5c2d86c2/attachment.html>

From pasky at ucw.cz  Fri Apr 29 17:10:14 2011
From: pasky at ucw.cz (Petr Baudis)
Date: Fri, 29 Apr 2011 17:10:14 +0200
Subject: [Brmlab] [vmarsik@suse.cz: [Talk-cz] STS-134]
In-Reply-To: <BANLkTim8bdSaFArXSZfW7cDufLBuNbxn+g@mail.gmail.com>
References: <20110429111655.GD18927@machine.or.cz>
	<BANLkTim9PXQV3SSi1CS67h-jR20gbhi+5w@mail.gmail.com>
	<BANLkTim8bdSaFArXSZfW7cDufLBuNbxn+g@mail.gmail.com>
Message-ID: <20110429151014.GR3258@machine.or.cz>

On Fri, Apr 29, 2011 at 04:57:40PM +0200, Cestmir Houska wrote:
> Jo, to by nebylo spatny, taky bych se pridal!

Klidne zorganizujte a promitejte! :-) Uz jsme tam konec koncu jednou
promitali tiskovou konferenci NASA (kdyz nasli to zviratko s arsenem
misto fosforu).

-- 
				Petr "Pasky" Baudis
UNIX is user friendly, it's just picky about who its friends are.


From rainbof at gmail.com  Fri Apr 29 17:13:03 2011
From: rainbof at gmail.com (rainbof at gmail.com)
Date: Fri, 29 Apr 2011 15:13:03 +0000
Subject: [Brmlab] [vmarsik@suse.cz: [Talk-cz] STS-134]
In-Reply-To: <BANLkTim8bdSaFArXSZfW7cDufLBuNbxn g@mail.gmail.com>
Message-ID: <0015174c43f8351e0c04a2101c74@google.com>

vemu notak s windowsama ... pod linuxem to vazne moc nejde :D navic mi  
nebude pak chybet pod rukama.

Dne u?ivatel Cestmir Houska <czestmyr at gmail.com> napsal:
> Jo, to by nebylo spatny, taky bych se pridal!

> Cestmir

> 2011/4/29 Ondrej Beranek rainbof at gmail.com>

> co to dneska promitnout v brmlabu ?

> Dne 29. dubna 2011 13:16 Petr Baudis pasky at ucw.cz> napsal(a):



> ----- Forwarded message from Vilem Marsik vmarsik at suse.cz> -----



> FYI, dnes vecer (21:03) je posledni let raketoplanu Endeavour, mozna

> posledni let raketoplanu vubec (jeste planuji jeden, ale co vim tak

> neni uplne jiste zda bude). Primy prenos by mel byt zase na NASA TV.

> Prehravani v Mplayeru je trochu komplikovane, pro vyssi kvalitu je

> myslim potreba rtmpdump a trocha hackovani, takze doporucuji

> nenechavat na posledni chvili.



> VM



> ----- End forwarded message -----

> _______________________________________________

> Brmlab mailing list

> Brmlab at brmlab.cz

> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab







> _______________________________________________

> Brmlab mailing list

> Brmlab at brmlab.cz

> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110429/e50aac45/attachment.html>

From rainbof at gmail.com  Fri Apr 29 19:20:33 2011
From: rainbof at gmail.com (Ondrej Beranek)
Date: Fri, 29 Apr 2011 19:20:33 +0200
Subject: [Brmlab] [vmarsik@suse.cz: [Talk-cz] STS-134]
In-Reply-To: <0015174c43f8351e0c04a2101c74@google.com>
References: <0015174c43f8351e0c04a2101c74@google.com>
Message-ID: <BANLkTinQE68xz4D-YHxJw7fgu-ZJz1rajw@mail.gmail.com>

start odlozen :(
http://www.ceskenoviny.cz/svet/zpravy/nasa-odlozila-posledni-start-raketoplanu-endeavour-do-vesmiru/630435

2011/4/29 <rainbof at gmail.com>

> vemu notak s windowsama ... pod linuxem to vazne moc nejde :D navic mi
> nebude pak chybet pod rukama.
>
> Dne u?ivatel Cestmir Houska <czestmyr at gmail.com> napsal:
>
> > Jo, to by nebylo spatny, taky bych se pridal!
> >
> > Cestmir
> >
> > 2011/4/29 Ondrej Beranek rainbof at gmail.com>
> >
> > co to dneska promitnout v brmlabu ?
> >
> > Dne 29. dubna 2011 13:16 Petr Baudis pasky at ucw.cz> napsal(a):
> >
> >
> >
> > ----- Forwarded message from Vilem Marsik vmarsik at suse.cz> -----
> >
> >
> >
> > FYI, dnes vecer (21:03) je posledni let raketoplanu Endeavour, mozna
> >
> > posledni let raketoplanu vubec (jeste planuji jeden, ale co vim tak
> >
> > neni uplne jiste zda bude). Primy prenos by mel byt zase na NASA TV.
> >
> > Prehravani v Mplayeru je trochu komplikovane, pro vyssi kvalitu je
> >
> > myslim potreba rtmpdump a trocha hackovani, takze doporucuji
> >
> > nenechavat na posledni chvili.
> >
> >
> >
> > VM
> >
> >
> >
> > ----- End forwarded message -----
> >
> > _______________________________________________
> >
> > Brmlab mailing list
> >
> > Brmlab at brmlab.cz
> >
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > Brmlab mailing list
> >
> > Brmlab at brmlab.cz
> >
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
> >
> >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110429/8b36bd8c/attachment.html>

From ruza at ruza.eu  Fri Apr 29 20:38:19 2011
From: ruza at ruza.eu (Pavel Ruzicka)
Date: Fri, 29 Apr 2011 20:38:19 +0200
Subject: [Brmlab] Fwd: [hackerspaces] iGeigies
Message-ID: <4DBB059B.2040807@ruza.eu>

-------- Original Message --------
From: 	Sean Bonner <sean at seanbonner.com>
Date: 	Fri, 29 Apr 2011 10:42:24 -0700
Message-ID: 	<BANLkTik3QVfSLztcoiE6OXc0=CaqR+njRA at mail.gmail.com>
To: 	Hackerspaces General Discussion List <discuss at lists.hackerspaces.org>
Subject: 	[hackerspaces] iGeigies


Hey folks!
You may have heard rumors about this iPhone geiger counter being worked
on at the Tokyo Hackerspace and Crash Space in Los Angeles. We've been
calling them iGeigies:

http://igeigie.com

http://www.flickr.com/groups/igeigie/pool/with/5624027674/

<http://www.flickr.com/groups/igeigie/pool/with/5624027674/>It's
actually being designed (PCB shortly) as a fund raiser for Safecast.org
- we're going to make them and sell them two ways:

1 - from the website we'll only sell limited edition VERY EXPENSIVE ones 
that are obviously for donations to a good cause.

2 - as a semi complete kit (missing a few easy to get parts) to
hackerspaces only.

The deal with hackerspaces will be, we'll list them on the site as a
local (or sort of local) place to get them. Hackerspaces can sell them
as the kit, or build them and sell as complete. We'll give a suggested
markup, but final price will be up to each hackerspace BUT they have to
agree to donate 50% of the markup to Safecast.org

Thats kind of the plan at the moment. Thoughts? Ideas? Interest?

-s


-- 
Sean Bonner
Assorted Troublemakings
homebase <http://seanbonner.com> | twitter <http://twitter.com/seanbonner>



From ondrej.mikle at gmail.com  Fri Apr 29 23:45:36 2011
From: ondrej.mikle at gmail.com (Ondrej Mikle)
Date: Fri, 29 Apr 2011 23:45:36 +0200
Subject: [Brmlab] [vmarsik@suse.cz: [Talk-cz] STS-134]
In-Reply-To: <20110429111655.GD18927@machine.or.cz>
References: <20110429111655.GD18927@machine.or.cz>
Message-ID: <4DBB3180.90803@gmail.com>

Tento RTMP stream je celkom peklo, obycajne staci odchytit URL (hostname + app)
a stream name, s rtmpdumpom to byva trivialita tak na 5 min.

Ten flash applet tam posiela nejake veci naviac, najdalej som sa dostal, ze sa
to tvari, ze nieco zacina stahovat, ale dostane Net.Stream.Reset. Z flash app je
tam vidiet nieco ako RTMP redirect, musi sa tam poslat "objectEncoding" a
"channel", aby to nezahlasilo "stream not found", ale neviem naformatovat ten
objectEncoding, aby to suhlasilo s tym, co posiela flash applet.

URL: rtmp://199.66.239.80:1935/ustream
stream name: ustream at llnw_1_6540154_live_1

rtmpdump -r "rtmp://199.66.239.80:1935/ustream" -y
"ustream at llnw_1_6540154_live_1" -s
"http://cdn1.ustream.tv/swf/4/viewer.rsl.636.swf" -t
"rtmp://199.66.239.75:1935/ustream" -p
"http://www.nasa.gov/multimedia/nasatv/ustream.html" -f "LNX 10,3,162,29" -C O:1
-C NS:objectEncoding: -C NS:channel:6540154  -o asrf.flv


On 04/29/11 13:16, Petr Baudis wrote:
> ----- Forwarded message from Vilem Marsik <vmarsik at suse.cz> -----
> 
> FYI, dnes vecer (21:03) je posledni let raketoplanu Endeavour, mozna
> posledni let raketoplanu vubec (jeste planuji jeden, ale co vim tak
> neni uplne jiste zda bude). Primy prenos by mel byt zase na NASA TV.
> Prehravani v Mplayeru je trochu komplikovane, pro vyssi kvalitu je
> myslim potreba rtmpdump a trocha hackovani, takze doporucuji
> nenechavat na posledni chvili.
> 
> VM
> 
> ----- End forwarded message -----
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> 



From johny at 2600.sk  Sat Apr 30 12:09:16 2011
From: johny at 2600.sk (JoHnY)
Date: Sat, 30 Apr 2011 12:09:16 +0200
Subject: [Brmlab] [vmarsik@suse.cz: [Talk-cz] STS-134]
In-Reply-To: <4DBB3180.90803@gmail.com>
References: <20110429111655.GD18927@machine.or.cz> <4DBB3180.90803@gmail.com>
Message-ID: <20110430120916.57637ff1.johny@2600.sk>

Ja som riesil nieco take davnejsie a bolo tam treba pridat swf hash toho playera, inac to neslo... Nemam cas to teraz skumat ale mozno by to pomohlo aj v tomto pripade.

On Fri, 29 Apr 2011 23:45:36 +0200
Ondrej Mikle <ondrej.mikle at gmail.com> wrote:

> Tento RTMP stream je celkom peklo, obycajne staci odchytit URL
> (hostname + app) a stream name, s rtmpdumpom to byva trivialita tak
> na 5 min.
> 
> Ten flash applet tam posiela nejake veci naviac, najdalej som sa
> dostal, ze sa to tvari, ze nieco zacina stahovat, ale dostane
> Net.Stream.Reset. Z flash app je tam vidiet nieco ako RTMP
> redirect, musi sa tam poslat "objectEncoding" a "channel", aby to
> nezahlasilo "stream not found", ale neviem naformatovat ten
> objectEncoding, aby to suhlasilo s tym, co posiela flash applet.
> 
> URL: rtmp://199.66.239.80:1935/ustream
> stream name: ustream at llnw_1_6540154_live_1
> 
> rtmpdump -r "rtmp://199.66.239.80:1935/ustream" -y
> "ustream at llnw_1_6540154_live_1" -s
> "http://cdn1.ustream.tv/swf/4/viewer.rsl.636.swf" -t
> "rtmp://199.66.239.75:1935/ustream" -p
> "http://www.nasa.gov/multimedia/nasatv/ustream.html" -f "LNX
> 10,3,162,29" -C O:1 -C NS:objectEncoding: -C NS:channel:6540154  -o
> asrf.flv
> 
> 
> On 04/29/11 13:16, Petr Baudis wrote:
> > ----- Forwarded message from Vilem Marsik <vmarsik at suse.cz> -----
> > 
> > FYI, dnes vecer (21:03) je posledni let raketoplanu Endeavour,
> > mozna posledni let raketoplanu vubec (jeste planuji jeden, ale co
> > vim tak neni uplne jiste zda bude). Primy prenos by mel byt zase
> > na NASA TV. Prehravani v Mplayeru je trochu komplikovane, pro
> > vyssi kvalitu je myslim potreba rtmpdump a trocha hackovani,
> > takze doporucuji nenechavat na posledni chvili.
> > 
> > VM
> > 
> > ----- End forwarded message -----
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> > 
> 
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab


 
	bye, JoHnY.



From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr 30 22:25:36 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 30 Apr 2011 22:25:36 +0200
Subject: [Brmlab] brmScope
Message-ID: <20110430202536.GA2796@localhost.dummy.net>



Ahoj,

zaujal me projekt brmScope. Kdysi jsem si chtel nejaky USB mikroskop taky
poridit, ale v GMku mi nebyli schopni rict jestli funguje i pod Linuxem, tak
jsem od toho nakonec upustil.

Mate s tim nejake zkusenosti? Myslim jestli treba se da rozchodit pomoci
video4linux, nebo jak se jmenuje ta kernelova vec pro USB kamery. 

Jinak pokud by byl zajem, tak se trochu vyznam v image processingu, a byl
bych schopen napsat SW, ktery z mnoha prekryvajicich se obrazku s ruznym
zaostrenim vytvori objemovy model castecne pruhledneho vzorku (i vetsiho nez
je zorne pole mikroskopu). Jestli se vas vyzkum ma ubirat timto smerem, rad
se pripojim.


David




From niekt0 at hysteria.sk  Sat Apr 30 22:54:12 2011
From: niekt0 at hysteria.sk (niekt0)
Date: Sat, 30 Apr 2011 22:54:12 +0200
Subject: [Brmlab] brmScope
In-Reply-To: <20110430202536.GA2796@localhost.dummy.net>
References: <20110430202536.GA2796@localhost.dummy.net>
Message-ID: <BANLkTi=bjBhWL5mppsci-f0NcwmRpXDT+Q@mail.gmail.com>

Ahoj,

ja som si kupil tento:
http://www.gme.cz/cz/usb-digitalni-mikroskop-um019-p759-007.html
a pod linuxom vunguje perfektne, bezproblemovejsie nez pod win.
udev ti vytvori /dev/videoX, ktore mozes potom prehravat napr.
mplayerom, alebo vlc..
Nic nie je potrebne instalovat.

Co sa tyka toho procesingu, tak to sa urcite zastav..;)

n.

On 4/30/11, David Klusacek <klusacek at atrey.karlin.mff.cuni.cz> wrote:
>
>
> Ahoj,
>
> zaujal me projekt brmScope. Kdysi jsem si chtel nejaky USB mikroskop taky
> poridit, ale v GMku mi nebyli schopni rict jestli funguje i pod Linuxem, tak
> jsem od toho nakonec upustil.
>
> Mate s tim nejake zkusenosti? Myslim jestli treba se da rozchodit pomoci
> video4linux, nebo jak se jmenuje ta kernelova vec pro USB kamery.
>
> Jinak pokud by byl zajem, tak se trochu vyznam v image processingu, a byl
> bych schopen napsat SW, ktery z mnoha prekryvajicich se obrazku s ruznym
> zaostrenim vytvori objemovy model castecne pruhledneho vzorku (i vetsiho nez
> je zorne pole mikroskopu). Jestli se vas vyzkum ma ubirat timto smerem, rad
> se pripojim.
>
>
> David
>
>
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>


From rainbof at gmail.com  Sat Apr 30 23:03:27 2011
From: rainbof at gmail.com (Ondrej Beranek)
Date: Sat, 30 Apr 2011 23:03:27 +0200
Subject: [Brmlab] brmScope
In-Reply-To: <BANLkTi=bjBhWL5mppsci-f0NcwmRpXDT+Q@mail.gmail.com>
References: <20110430202536.GA2796@localhost.dummy.net>
	<BANLkTi=bjBhWL5mppsci-f0NcwmRpXDT+Q@mail.gmail.com>
Message-ID: <BANLkTinm-KiLye38H9Cu=f-75gKB1sRqjQ@mail.gmail.com>

j? budu z?tra skoro cel? den v brmlabu pokud nebude? v?d?t co s ?asem :D

O.

Dne 30. dubna 2011 22:54 niekt0 <niekt0 at hysteria.sk> napsal(a):

> Ahoj,
>
> ja som si kupil tento:
> http://www.gme.cz/cz/usb-digitalni-mikroskop-um019-p759-007.html
> a pod linuxom vunguje perfektne, bezproblemovejsie nez pod win.
> udev ti vytvori /dev/videoX, ktore mozes potom prehravat napr.
> mplayerom, alebo vlc..
> Nic nie je potrebne instalovat.
>
> Co sa tyka toho procesingu, tak to sa urcite zastav..;)
>
> n.
>
> On 4/30/11, David Klusacek <klusacek at atrey.karlin.mff.cuni.cz> wrote:
> >
> >
> > Ahoj,
> >
> > zaujal me projekt brmScope. Kdysi jsem si chtel nejaky USB mikroskop taky
> > poridit, ale v GMku mi nebyli schopni rict jestli funguje i pod Linuxem,
> tak
> > jsem od toho nakonec upustil.
> >
> > Mate s tim nejake zkusenosti? Myslim jestli treba se da rozchodit pomoci
> > video4linux, nebo jak se jmenuje ta kernelova vec pro USB kamery.
> >
> > Jinak pokud by byl zajem, tak se trochu vyznam v image processingu, a byl
> > bych schopen napsat SW, ktery z mnoha prekryvajicich se obrazku s ruznym
> > zaostrenim vytvori objemovy model castecne pruhledneho vzorku (i vetsiho
> nez
> > je zorne pole mikroskopu). Jestli se vas vyzkum ma ubirat timto smerem,
> rad
> > se pripojim.
> >
> >
> > David
> >
> >
> > _______________________________________________
> > Brmlab mailing list
> > Brmlab at brmlab.cz
> > http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
> >
> _______________________________________________
> Brmlab mailing list
> Brmlab at brmlab.cz
> http://rover.ms.mff.cuni.cz/mailman/listinfo/brmlab
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://brmlab.cz/pipermail/brmlab/attachments/20110430/844b2262/attachment.html>

From klusacek at atrey.karlin.mff.cuni.cz  Sat Apr 30 23:34:03 2011
From: klusacek at atrey.karlin.mff.cuni.cz (David Klusacek)
Date: Sat, 30 Apr 2011 23:34:03 +0200
Subject: [Brmlab] brmScope
In-Reply-To: <BANLkTinm-KiLye38H9Cu=f-75gKB1sRqjQ@mail.gmail.com>
References: <20110430202536.GA2796@localhost.dummy.net>
	<BANLkTi=bjBhWL5mppsci-f0NcwmRpXDT+Q@mail.gmail.com>
	<BANLkTinm-KiLye38H9Cu=f-75gKB1sRqjQ@mail.gmail.com>
Message-ID: <20110430213403.GA3156@localhost.dummy.net>



> j? budu z?tra skoro cel? den v brmlabu pokud nebude? v?d?t co s ?asem :D

Rad bych, ale bohuzel ted finishuju disertaci. Takze az pak....


> > ja som si kupil tento:
> > http://www.gme.cz/cz/usb-digitalni-mikroskop-um019-p759-007.html
> > a pod linuxom vunguje perfektne, bezproblemovejsie nez pod win.

Dik za ten odkaz, asi to vyzkousim (az se k tomu dostanu).