Equipment

Equipment we already have for hackerspace purposes. (See also: Equipment wishlist) Currently, it's just a spreadsheet and items are numbered manually, we are also working on a proper equipment tracking system.

Zoznam veci ktore sa v sklade momentalne nachadzaju najdete na brmko:~brmlab/brmsklad.gnumeric, temer stale otevreny na monitoru ve skladu - je to docasne riesenie, kedze zatial ziaden equipment management system nemame, ale nemal by byt problem zoznam don portnut az nejaky bude.

Vsetky predmety (hardware, krabice, etc) v sklade maju niekde na sebe nalepeny carovy kod s evidencnym cislom (brm1 - brm200) a pridelenu policu na ktorej ich najdete (SKLAD1-SKLAD20). V zozname najdete aj kratke popisky predmetov, ktore su miestami dost rudimentarne - nevahajte doplnit, pretriedit a pripadne opravit :)

Aby sklad sluzil vsetkym, je dolezite do nej veci vracat na spravne police. Ak chcete pridavat nove veci do skladu, poctivo ich pripisujte do tabulky! Stitky na oznacenie evidencnym cislom su v modrej krabicke na okenici.

Pokud si berete neco ze skladu, zkontrolujte prosim v tabulce, zda to neni neci a prip. jake jsou podminky toho, ze si to vezmete/pouzijete (typicky nejsou bud zadne, nebo o tom chce dotycny jen vedet).

Neni problem prubezne upresnovat podminky zapujceni veci, ktere se ted jen tak vali v brmlabu, kdyz se k nim nekdo prihlasi, takze naskladnujte s odvahou!

This list is not really up-to-date - there is a lot more stuff in brmlab. We are moving things to the /dev/storage room continuously as we also add them to the brmko:~brmlab/brmsklad.gnumeric inventory list.

Please move entries from Still outside section to Already at brmlab section if you bring stuff to hackerspace

K “owned by” se prosim chovejte tak, jako ze to stale patri majiteli a ten prislusnou vec muze pripadne chtit v poradku zpatky.
Veci oznacene “thanks” jsou k obecnemu uziti a v podstate darovane brmlabu.

• Pentium 4 without HDD
• Computer P4 + LCD Monitor (thanks sargon)
• 2U Server machine 2X P3 @ 1GHz , 1G RAM , no disks (sargon)
• CRT 17” (thanks sargon)
• Notebook Acer, no keyboard no touchpad no battery but functional ;) (thanks sargon)
• PCI diagnostic card, DX sku.3589 (owned by ruza)
• Nortel Baystack 450-24T, 24port
• 14” CRT, ADI (od ruza, zrejme pujde do srotu k Blackovi pokud nekdo neprojevi zajem)
• small P4 server (thanks joe)
• Pentium 3, AMD 750 (biiter)
• wireless router Asus wl-500g Premium v1 with OpenWRT Kamikaze (owned by ruza)
• tiskarna Unisys AP-9316 laser printer
• IBM RS/6000 7043 43P-240 (PowerPC 604e 166MHz) (thanks stick)
• 3x Cisco 1700
• 1x Cisco 800
• 1x Cisco 2509 1, 2, 3
• 1x Cisco 2924 XL, 24 port
• DSL+Wifi router Microcom AD 2735
• Dual opteron server brmko. 2G ram, working.
• 4U Rack Server Chassis(RM414xx) (thanks to sysop)
  • 2x Intel(R) Xeon(TM) CPU 2.66GHz (tj virtual 4 core), 32bit
  • 8gb RAM (nainstalovane jadro s PAE)
  • SATA radic do PCI Promise SATA300 TX4 (4xSATA)
    • port 0 - WDC WD1500ADFD-00NLR1 139 GB
    • port 1 - WDC WD1500ADFD-00NLR1 139 GB
    • port 2 - WDC WD1500ADFD-00NLR1 139 GB
    • port 3 - WDC WD360GD-00FNA0 34 GB
  • SATA radic do PCI 3ware 8506-4lp (4xSATA), Alt+3 pri startu
    • port 0 - WDC WD1500ADFD-00NLR1 150 GB
    • port 1 - WDC WD360GD-00FNA0 37 GB
    • port 2 - WDC WD360GD-00FNA0 37 GB
    • port 3 - WDC WD360GD-00FNA0 37 GB
    • BIOS: BE7X 1.08.00.048 Firmware: FE7S 1.05.00.063
  • SATA radic do PCI 3ware Escalade 8506-8 (8xSATA), Alt+3 pri startu
    • port 0 - WDC WD360GD-00FNA0 37 GB
    • port 1 - WDC WD360GD-00FNA0 37 GB
    • port 2 - WDC WD360GD-00FNA0 37 GB
    • port 3 - WDC WD360GD-00FNA0 37 GB
    • port 4 - WDC WD1200JD-00HBB0 120 GB
    • port 5 - WDC WD360GD-00FNA0 37 GB
    • port 6 - WDC WD1500ADFD-00NLR1 150 GB
    • port 7 - WDC WD360GD-00FNA0 37 GB
    • BIOS: BE7X 1.08.00.048 Firmware: FE7S 1.05.00.063
• TP-LINK TL-WR841ND, WiFi 802.11b/g/n (11/54/300Mbps), odnímatelné antény, 1x WAN, 4x LAN (owned by ruza)
• 2x D-Link DGS-1008D 8port 10/100/1000 (owned by ruza)
• USB myš, GIGABYTE GM-M5050 černá, optická, 800dpi

• telephone Ericsson Dialog 4220 (thanks stick)
• GSM cellphone Philips Fizz, s Paegas Twist kartou, chybi adapter 13.5V (thanks caha)
• expirovaná GSM SIM Eurotel wilderových pokusů se SMS (thanks ruza)
• GSM Sony Ericsson K610i + Vodafone Divoká karta (thanks ruza)
• GSM cellphone Motorola V360 + charger (thanks stick)
• Gtran GPC-6420, CDMA modem, Eurotel, hlásí že není signál, zřejmě by bylo znova oživit
• GSM / WCDMA - Phone Nokia N73
• GSM Motorola C139 Osmocom compatible
• PALM V - not phone but mobile device ;)
• GSM Palm Treo 750 (working)

• polystyrenova krabice plna starsich radioamaterskych soucastek, (bylo by dobre prebrat) (thanks caha)
• stabilni zdroj napeti ( treba opravit) (thanks caha)
• regulovatelny zdroj napeti 1-30V 1A dvoukanalovy (sargonuv stul ve ctvercove mistnosti; thanks vatoz)
• Osciloscope Tektronix TDS 2002
• SMD soldering station (niekt0)
• SMD soldering station (sargon)
• HotAir soldering station (sargon)
• pájka Fluitin 1533 Sn60PbCu2 1mm 1kg Fg2.5% (thanks ruza)
• Various microchip programming kits (thanks niekt0)
• touchatag, USB HF RFID reader (thanks lui)
• rfid sticker tags, clear Mifare cards, Skip@ss card (thanks lui)
• Authenex OTP devices, iKey 3000 (thanks lui)
• MP3 player Xtreme 2GB (thanks stick)
• multimeter (niekt0)
• Lot of Microchip samples for educational purpose's
• Paper banknotes scanning machine
• projector A+K AstroBeam S130, 575W-90V (thanks Tomas Suchan)
• projector NEC NP 115 bily (owned by Tomas Suchan)
• Sony premium miniDV (14ks), dvm60pr3
• TomSuch's DS18S20 for testing in pasky's box

• various lockpicks (niekt0)
• ETA 614, oranzove foukadlo ohrateho vzduchu, zlámané nožičky
• RC model 1:28 Ford F-150 (thanks stick)
• 2x small RC cars (thanks axtheb)
• ultrasmall portable videocamera (720p) Flip MinoHD (thanks stick)
• charger/adapter Minwa MW 4798 (owned by stick)
• Merkur M8 and more (onwed by axtheb)
• Bunch of li-ion 18650 batteries + charger.
• kávovar
• Geiger counter - grey tube in Jendabox (on top of the rack near coffee machine on the left when you go to HW lab)

• radioamaterske knizky (thanks caha)
• casopis Amaterska radia (thanks caha)
• historicke Stavebni navody (owned by caha)
• http://rover.ms.mff.cuni.cz/~pasky/brmkniznica.csv

• 2 beds with legs (in the plastic bag behind the bed) (thanks lui)
• desk with drawers (thanks lui)
• green plastic garden table + 4 chairs (thanks johny)
• kancelarske zidle 2x modra, 1x cerna
• multitude of tables of various shapes (thanks joe)
• smaller amount of chairs (thanks joe)
• couch and two armchairs (thanks joe)
• fridge (thanks joe)
• few smaller cupboards (thanks joe)
• microwave (thanks biiter)
• Ikea Jeff, 20ks
• 20+ zeleznych regalu o rozmerech 90x50x200. (thanx vatoz)

• Proxmark, RFID HF/LF reader/writer/emulator/sniffer (niekt0)
• Touchtag, RFID HF reader/writer (niekt0)
• 1-wire to USB adapter, for ibutton tokens (niekt0)
• Bluetooth dongles (sniffer) (niekt0)
• MLAB modules

stick:

• two almost complete PCs (without cases - via ekin, via lokiman)
• two CRT monitors (via lokiman)

pasky + chido:

• Glue pistol
• 2x2m polyacrylic board - meant as surface for multitouch table
• Large amount of IR LEDs
• Three lower-end webcams, one in IR spectrum
• Three very cheap USB audio in/out gadgets (with GPIO pins for buttons)
• Crude pistol soldering machine
• Three Arduino boards
• Some stepper motors + motor driver
• Easily electrically driven ancient “plotter machine” permanently borrowed from Milan Vancura
• ASUS WL 500gPv2 wifi router - basically a cheap semi-mobile Linux platform that runs OpenWRT (16M flash, 32M RAM) and has wifi antenna, five ethernet ports, two USB ports, solderable-on TTL-level serial and 5V input (theoretical max 2.5A).
• An iRobot Roomba 505, but only well defined short-term lending, I also want the thing at home :) - in case of larger interest, we can buy iRobot Create
• Two Robotron 1715 machines with monitors, keyboards and set of (still working!) floppy disks with system, some games and some programs (incl. DB3 database, TP3 compiler)
• 1l 100% isopropyl alcohol

Plnt

• SPARCstation 10
• Brother HL-10V printer (without cartridges)
• OvisLink 1120 AP
• WiFi 2.4GHz antennas (18dBi, 24dBi)
• WiFi equipment
• couple of USB BT dongles
• unfinished Ronja

harvie

• Two electromotoric locks (alarm?)
• SCM Microsystems, Inc. SCR331 SmartCard Reader (Proprietary linux drivers available; can read SCs, SIMs, Prague OpenCards, Credit cards, etc…) (alarm?)
• AVR ICSP bit-bang LPT programmer
• Various MiniPCI & PCMCIA wifi cards
• Lockpicks, Pickgun
• Trust USB Gamepad
• Wireless doorbell
• Some small solar cells
• Some opto-separators from various devices
• microphones and tiny-speakers from various devices
• Arduino
• Old PCs
• Old CRT
• Old floppydisks

ruza

• Acer Travelmate 225 XC (power supply needs to be fixed, but seems to be dead already, probably motherboard problem) (thanks ruza)
• radio scanner Uniden USC230 (Frequency Coverage: 25-54 MHz, 108-174 MHz, 216-225 MHz, 400-512 MHz, 806-956 MHz, 1240-1300 MHz)
• chinese TV-B-Gone, DX sku.2724
• Wii remote, DX sku.30499
• ATX+HDD+SATA Power Supply Tester, DX sku.15707
• disk WD1600 SATA (160 gb)
• http://www.alza.cz/sapphire-hd-5550-d163571.htm, grafická karta 1GB DDR3 (1600MHz) + 1GB Hyper Memory, ATI Radeon HD 5550 (550MHz), PCIe x16, CrossFire, 128bit, DVI, HDMI, low profile

blackhead

• http://blackhead.cz/hackerspace/equipment.html

b00lean

• Pájecí stanice (kombo pájka + teplej vzduch)
• Mikroskop
• Programátor BeeProg+ plus 48TOSP zif socket
• Programátor Xeltek 280U
• Plonkovej komp momentálně bez disku 4jádro Intel.
• AT91SAM7S256-KIT
• JTAG via USB adapter
• EZ430-Chronos hodinky
• UV rakvička na mazání eeprom pro seniory
• Multimetr
• USB↔RS232

elventhor

• Arduino duemilanove + xbee shield + bluetooth bee
• Samsung i600 (bt,wifi,3g,camera)
• Sony PaSoRi USB-RFID-reader (13.54MHz) (works with linux)
• Bluetooth-GPS dongle
• GPS→SMS tracking dongle
• 4.3” Windows CE Core 5.0 based touch screen GPS-navigator (supports .net)
• USB to 2.5” IDE/SATA and 3.5 IDE/SATA adaptor

jenda:

• PCB drill
• third hand
• forever flashlight
• stir4200 USB IrDA convertor (works with Linux 2.6.19+)
• 230V~ wattmeter

harvie

• Potassium nitrate (Dusičnan draselný)
• Aluminium powder
• Iron(III) oxide
• Charcoal (dřevěné uhlí)
• Sulfur powder

wapno:

• bookshelf - brownish woodish imitation

czestmyr:

• office table
• small homemade whiteboard that is transparent (I guess that makes it a transboard )

harvie:

• big Jilted Generation poster (black&white halftone version)